| Age | Commit message (Collapse) | Author |
|---|
|
ZEBRA_HELLO message is used by routing daemons to inform zebra
what type of routes daemon will be announcing to zebra. Also
zebra uses route_type_oaths array to track which daemon announces
which protocol. Zebra mops up routes if daemon didn't for some
reason.
|
|
ip_masklen() was likely to return incorrect results after being compiled
with -fstrict-aliasing (-O2, -O3, -Os)
|
|
The new implementation makes use of a 64KB mapping table, which makes it
possible to compute masklen faster and with constant execution time. The
map also allows for additional version of the function, which can detect
errors in input argument.
The previous implementation had a variable cost of execution, which
depended on masklen in a non-linear manner, and at its worst (/31) was
4 times slower, than the new implementation. The only case of old
function just slightly outperforming the new one is /0, which is of
little practical interest.
|
|
Experience with IPv4 counterpart of this function suggests, that
this way of type-punning is likely to cause errors.
|
|
(This patch was modified to leave calls to stream_getl() in place, they
are necessary for the stream's internal pointer to advance to the
correct position. -- Denis)
Signed-off-by: Denis Ovsienko <infrastation@yandex.ru>
Fix gcc warnings about varables that are set but never used.
* bgpd/bgp_attr.c
* cluster_unintern(): ret
* transit_unintern(): ret
* bgp_attr_default_intern(): attre
* bgp_mp_reach_parse(): rd_high, rd_low
* bgpd/bgp_route.c
* bgp_announce_check_rsclient(): bgp
* bgpd/bgp_zebra.c
* zebra_read_ipv4(): ifindex
* zebra_read_ipv6(): ifindex
* bgpd/bgpd.c
* bgp_config_write_peer(): filter
* lib/distribute.c
* distribute_list_all(): dist
* distribute_list(): dist
* distribute_list_prefix_all(): dist
* distribute_list_prefix(): dist
* lib/if_rmap.c
* if_rmap(): if_rmap
* lib/vty.c
* vty_accept(): vty
* lib/zclient.c
* zclient_read(): ret
* zebra/irdp_interface.c
* if_group(): zi
* zebra/rt_netlink.c
* kernel_read(): ret, sock
|
|
|
|
|
|
|
|
|
|
|
|
|
|
getaddrinfo returns a list of socket parameters for listening. it
will contain both IPv4 and IPv6 listening sockets. unless we use
IPV6_V6ONLY on the IPv6 ones, only the socket listed first will
work. if the IPv4 one came first, the IPv6 one would get an
"Address in use" error.
this functionality was already present for bgpd and its listening
sockets. as it is needed for vtys as well, make it a common helper.
Conflicts:
lib/sockunion.c
|
|
this replaces most occurences of routing protocol lists by preprocessor
defines from route_types.h. the latter is autogenerated from
route_types.txt by a perl script (previously awk). adding a routing
protocol now is mostly a matter of changing route_types.txt and log.c.
Conflicts:
lib/route_types.awk
|
|
|
|
lib/zclient.c: using of HAVE_TCP_ZEBRA in zclient_socket_*
definitions extended by else clause.
|
|
All daemons modified to support custom path to zserv
socket.
lib: generalize a zclient connection
zclient_socket_connect added. zclient_socket and
zclient_socket_un were hidden under static expression.
"zclient_serv_path_set" modified.
|
|
Make progname a string, and cast when calling asn1.
Remove variable set but never used.
|
|
The if_dump code had empty loop, that caused set-never-used warning.
|
|
If the vty_serv_sock_addrinfo is being used, then vty_serv_sock_family
is unsed. Fix by adjusting ifdef/else/endif
|
|
Change sockunion_log() to not use strdup(). This fixes a small memory
leak that occurs on every failed connect(), and is simpler/cleaner.
|
|
The delete_hook was being run after calling access list delete function.
This would cause ospf to dereference a NULL, in ospf_filter_update
because 'access->name' was already freed.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=7654
|
|
prefix2sockunion converts a struct prefix* to a union sockunion *;
prefix_common_bits counts the number of common bits in the prefix's
address part.
|
|
|
|
IPv6 supports the same concept of differentiated service for routing
protocols as IPv4, but like too many things, the standards committee
decided that having two names for the same thing wasn't good enough and
introduced a third more generic term transport class.
The socket option to set transport class works the same as IPv4, but the
arguments are different.
* lib/sockopt.[ch]
* setsockopt_ipv6_tclass(): new function
* bgpd/bgp_network.c
* bgp_connect(): set socket option
* bgp_listener(): set socket option
* ospf6d/ospf6_network.c
* ospf6_set_transport_class(): new function
* ospf6_serv_sock(): set socket option
* ripngd/ripngd.c
* ripng_make_socket(): set socket option
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): new helper macro
* bgp_attr.c
* bgp_attr_nexthop(): add check for "partial" bit, refresh flag error
reporting, explain meaning of RFC4271 section 6.3 and implement it
Conflicts:
bgpd/bgp_attr.c
|
|
- SAFI value 3 is reserved. It was assigned by RFC 2858 for a use
that was never fully implemented, so it is deprecated by this
document.
* zebra.h: rename macro
* bgp_fsm.c: (bgp_graceful_restart_timer_expire,
bgp_graceful_stale_timer_expire, bgp_stop, bgp_establish): update
* bgpd.c: (peer_nsf_stop): update
* bgp_open.c: (bgp_capability_vty_out): SAFI 3 isn't a recognized case
any more
|
|
* log.[ch]
* mes_lookup: add a parameter with the name of the message list, print
the name in case of failure.
* LOOKUP macro: pass the name of the message list.
|
|
(This commit is based on the patch from BZ#420, and should fix that bug.)
* configure.ac: detect availability of that API
* sockopt.c (setsockopt_ipv4_multicast): use it for join/leave IPv4
multicast groups
|
|
* sockopt.c (setsockopt_ipv4_multicast): check for wrong optname with
assert(), rather than return an error.
|
|
* sockopt.c (setsockopt_ipv4_multicast_if): fix missed line in
the previous commit.
|
|
* sockopt.[ch] (setsockopt_ipv4_multicast): ifindex is now mandatory (all
non-ancient OSes can use it anyway), and if_addr parameter (the address
of the interface) is now gone. (setsockopt_ipv4_multicast_if):
IP_MULTICAST_IF processing moved to this new function
* ospf_network.c (ospf_if_add_allspfrouters, ospf_if_drop_allspfrouters,
ospf_if_add_alldrouters, ospf_if_drop_alldrouters, ospf_if_ipmulticast),
rip_interface.c (ipv4_multicast_join, ipv4_multicast_leave,
rip_interface_new): adapt to the new interface
|
|
* sockopt.c (getsockopt_ifindex): "ifindex" was never used
|
|
|
|
Recent versions of libc on Linux (Debian Testing) create lots of
compile warnings about direct usage of libutil.h
|
|
information based on the multipath list (mp_list) generated during
the best path calculation. Display "multipath" for paths that are
multipath and also on bestpath if the route is multipath. Flag a
best path with the BGP_INFO_MULTIPATH_CHG if the multipath
set has changed since the last update. This can be used to trigger
updates to zebra and peers.
The multipath markup is a lazily allocated bgp_info_mpath structure
that is added to the best path and any multipaths. The mpath structures
are linked together with the best path element at the head and the
other elements ordered by nexthop and then by peer address. This
markup scheme is updated by calling bgp_info_mpath_update() and passing
in a new mp_list the the current multipath set. There are additional
API's for walking the multipath set, querying the count of multipaths,
and for cleaning up the multipath markup information when freeing path
information.
* bgpd/bgp_mpath.c
* bgp_info_mpath_new(): Allocation of new mpath element
* bgp_info_mpath_free(): Release memory for mpath element
* bgp_info_mpath_get(): Access mpath element of path. Allocate memory
on-demand
* bgp_info_mpath_enqueue(): Enqueue a path onto the multipath list
* bgp_info_mpath_dequeue(): Remove a path from the multipath list
* bgp_info_mpath_first(): Return first path on the multipath list
* bgp_info_mpath_next(): Return next path on the multipath list
* bgp_info_mpath_count(): Return the number of paths on the multipath list
* bgp_info_mpath_count_set(): Set the number of paths on the multipath list
* bgp_info_mpath_update(): Update multipath markup on bgp route table entry
and flag any changes. Emit 'debug bgp event' output on any multipath
change.
* bgpd/bgp_mpath.h
* struct bgp_info_mpath: Information added to a bgp_info path to record
multipath information
* External declarations for new functions in bgp_mpath.c
* bgpd/bgp_route.c
* bgp_info_free(): Free mpath memory when freeing path information
* bgp_info_reap(): Dequeue path from multipath queue before deleting it
* bgp_best_selection(): Calls bgp_info_mpath_update() with latest
mp_list to mark-up rib table entry
* bgp_vty_out_detail(): Add display of multipath flag for a path. Also
display 'multipath' for bestpath if it is a multipath route
* bgpd/bgp_route.h
* struct bgp_info: Add pointer to bgp_info_mpath information
* Add flags to mark a path as multipath (BGP_INFO_MULTIPATH) and
to mark bestpath if multipath information has changed
(BGP_INFO_MULTIPATH_CHG)
* lib/memtypes.c
* Add MTYPE_BGP_MPATH_INFO for allocating memory for bgp_info_mpath
* tests/bgp_mpath_test.c
* Add test case for bgp_info_mpath_update() and supporting functions
|
|
* sockunion.c: (sockopt_minttl) Add IPv6 support for min hop count.
The kernel support is Linux kernel 2.6.35 or later.
|
|
* bgp_vty.c: (peer_ebgp_multihop_{un,}set_vty) tail-call cleanup.
({no_,}neighbor_ttl_security) ditto.
* bgpd.c: (peer_ttl_security_hops_set) Peer group checks and TTL set only
need to be done on transition.
* sockunion.c: (sockopt_minttl) remove always-on debug and improve readability.
|
|
* bgpd: Add support for RFC 5082 GTSM, which allows the TTL field to be used
to verify that incoming packets have been sent from neighbours no more
than X IP hops away. In other words, this allows packets that were sent from
further away (i.e. not by the neighbour with known distance, and so possibly
a miscreant) to be filtered out.
* lib/sockunion.{c,h}: (sockopt_minttl) new function, to set a minimum TTL
using the IP_MINTTL socket opt.
* bgpd.h: (BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK) define for command
error for minttl.
(struct peer) add a config variable, to store the configured minttl.
(peer_ttl_security_hops_{set,unset}) configuration handlers
* bgpd.c: (peer_group_get) init gtsm_hops
(peer_ebgp_multihop_{un,}set) check for conflicts with GTSM. Multihop and
GTSM can't both be active for a peer at the same time.
(peer_ttl_security_hops_set) set minttl, taking care to avoid conflicts with
ebgp_multihop.
(bgp_config_write_peer) write out minttl as "neighbor .. ttl-security hops X".
* bgp_vty.c: (bgp_vty_return) message for
BGP_ERR_NO_EBGP_MULTIHOP_WITH_TTLHACK
(peer_ebgp_multihop_{un,}set_vty)
* bgp_network.c: (bgp_accept) set minttl on accepted sockets if appropriate.
(bgp_connect) ditto for outbound.
|
|
The following patch was also neccessary to compile.
* command.c: (config_logmsg_cmd) use "%s" format spec
* if.c: (connected_log) ditto
|
|
* sockunion.{c,h}: (sockopt_cork) wrapper for TCP_CORK socket option for
those platforms that provide it. For other platforms, it is just a nop.
|
|
* log.c: (closezlog) Also free the dynamically allocated filename when
a log is closed.
|
|
if.c: (if_terminate) This adds a cleanup function that can be called
when a daemon exits, similar to vty_terminate().
|
|
* hash.{h,c}: (string_hash_make) Hash optimised for strings, current
implementation using Bernstein hash, which offers a good compromise
between distribution and performance.
* distribute.c: (distribute_hash_make) use previous instead of additive
string hash.
* if_rmap.c: (if_rmap_hash_make) ditto
|
|
* bgpd: Connected table locks were being locked but not unlocked, such that
eventually a lock would exceed 2^31 and become negative, thus triggering
an assert later on.
* bgp_main.c: (bgp_exit) delete connected elements along with ifp's.
* bgp_nexthop.c: (bgp_nexthop_lookup{,_ipv6}) add missing unlocks
(bgp_multiaccess_check_v4) ditto
(bgp_connected_{add,delete}) Use a distinct memtype for bgp_connected_ref.
(bgp_scan_finish) reset the nexthop cache to clean it up when bgpd exits
* bgp_route.c: fix missing bgp_node unlocks
* lib/memtype.c: (memory_list_bgp) add MTYPE_BGP_CONN
* testing: has been tested for almost 2 months now.
|
|
* lib/memory.c: (zrealloc) If is called with NULL pointer then it should
increment allocations because it behaves the same as zmalloc.
(zfree) is called with NULL pointer, it does nothing therefore allocation
count should not change.
|
|
* lib/table.c: (route_node_match) fix overshoot that was causing this
function to go 1 bit too far and thus reading past end of prefix.
(route_node_lookup) be defensive - don't assume others will clean up
leaves when removing info.
|
|
* lib/prefix.c: (prefix_match) nano-optimisation, let it return early
without copying pointers.
|
|
* workqueue.c: (work_queue_run) Err more on the side of keeping granularity
down, by being more conservative about increasing it.
Also, fix mispelling.
|
|
* (general) this can be useful when investigating thread latency problems,
when you don't want to have to restart a daemon between tests.
* thread.c: (cpu_record_(hash_)clear) wipe the stored thread cpu history
data, according to the filter, similar to the vty print code.
(clear_thread_cpu_cmd) new command to clear data.
* thread.h: export new command
* command.c: install it
|
|
* thread.c: (thread_fetch) the current scheduler will service events
indefinitely, ignoring I/O and timers, so long as there are events.
In other words, events can crowd out I/O and timers. In theory this
shouldn't be a huge problem as events are generated only by timers
and I/O, however in practice it means normal-load behaviour is not as
useful a predictor of high-load behaviour as it should be.
Fix this by considering all the kinds of threads, in every run of the
scheduler. For any given run, we prioritise events, however across
runs the scheduler should be fair.
This has been observed to give more stable inter-packet times in
testing of ospfd (i.e. lower std-dev).
(thread_process) new heler to queue all the given threads onto the ready
list
|
