summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2005-02-162005-02-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* network.c: (set_nonblocking) Should check return code from fcntl(F_GETFL).
2005-02-162005-02-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* network.h: Declare new function set_nonblocking. Indicate that readn and writen are deprecated. * network.c: (set_nonblocking) New function to make a file descriptor non-blocking, since it seems silly to have fcntl calls sprinkled throughout the code.
2005-02-14- oops, date was wrong in actual ChangeLogpaul
2005-02-142005-02-14 Paul Jakma <paul.jakma@sun.com>paul
* stream.h: Unsigned long updated to size_t * stream.c: ditto * stream.h: Add stream_copy, stream_dup, stream_recvmsg. Add comment describing struct stream abstraction, and various other comments. Deprecate several unsafe/ambigious macros. Add STREAM_WRITEABLE and STREAM_READABLE. Add (stream_getl_from) for symmetry. Update stream_forward_{endp,getp} to use size_t offset. Make stream data a 0 length array, rather than a seperate malloc. * stream.c: Add consistency checks. Update to follow stream.h changes. (stream_new) Alloc stream+data in one go. (stream_copy) new function, copy a stream. (stream_dup) new function, dup a stream. (stream_recvmsg) new function, recvmsg data into a stream. (stream_empty) no need to check getp == 0.
2005-02-122005-02-12 Paul Jakma <paul.jakma@sun.com>paul
* stream.h: Unsigned long updated to size_t * stream.c: ditto
2005-02-092005-02-09 Paul Jakma <paul.jakma@sun.com>paul
* (global) Update code to match stream.h changes. stream_get_putp effectively replaced with stream_get_endp. stream_forward renamed to stream_forward_getp. stream_forward_endp introduced to replace some previous setting/manual twiddling of putp by daemons. * lib/stream.h: Remove putp. Update reference to putp with endp. Add stream_forward_endp, which daemons were doing manually. Rename stream_forward to stream_forward_getp. lib/stream.c: Remove/update references to putp. introduce stream_forward_endp.
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Change macro definitions SET_FLAG and UNSET_FLAG to use compound assignment operators (aesthetic change).
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (zlog_signal,zlog_backtrace_sigsafe) Eliminate use of fileno() since it is not async-signal-safe. (_zlog_assert_failed) Rewrite crashlog logic more compactly. (zlog_set_file,zlog_reset_file,zlog_rotate) Update logfile_fd for use in signal handler.
2005-02-032005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (syslog_sigsafe) Reduce scope of syslog_fd: it is accessed inside this function only. (open_crashlog) New function to open /var/tmp/quagga.<daemon>.crashlog with flags O_WRONLY|O_CREAT|O_EXCL to save some crash info. (zlog_signal,_zlog_assert_failed) Increase logging priority from LOG_ERR to LOG_CRIT. If no file logging is configured, try to use open_crashlog to create a crash logfile. (zlog_backtrace_sigsafe) If a crashlog file descriptor is open, dump a backtrace to that file.
2005-02-022005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down, not for event ISM_InterfaceDown. And improve the message by adding the interface flags. * if.h: Declare if_flag_dump. [backport candidate]
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* daemon.c: (daemon) Replace perror with zlog_err. * vty.c: (vty_serv_un) Replace perror with zlog_err. * ripd.c: (rip_create_socket) Replace perror with zlog_err. * ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with zlog_err. * ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with zlog_err.
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* buffer.h: Fix comment on buffer_getstr to reflect that it now uses XMALLOC. * buffer.c: (buffer_getstr) Use XMALLOC(MTYPE_TMP) instead of malloc. * filter.c: (access_list_remark,ipv6_access_list_remark) Use argv_concat instead of buffer_getstr. * if.c: (interface_desc) Use argv_concat instead of buffer_getstr. * plist.c: (ip_prefix_list_description,ipv6_prefix_list_description) Use argv_concat instead of buffer_getstr. * bgp_filter.c: (ip_as_path,no_ip_as_path) Use argv_concat instead of buffer_getstr. * bgp_route.c: (bgp_show_regexp) Fix memory leak: need to free string returned by buffer_getstr. (bgp_show_community) Must use XFREE instead of free on string returned by buffer_getstr. * bgp_routemap.c: (set_community) Must use XFREE instead of free on string returned by buffer_getstr. * bgp_vty.c: (neighbor_description) Use argv_concat instead of buffer_getstr.
2005-01-282005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* lib/buffer.h: Document behavior of buffer_getstr function. * lib/buffer.c: (buffer_getstr) Fix bug: must handle case where the string extends beyond the head struct buffer_data.
2005-01-282005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* lib/command.h: Document behavior of argv_concat function. * lib/command.c: (argv_concat) Calculate total string length first so we can call malloc just once (instead of realloc'ing to add each string element). (do_echo,config_logmsg) Allow for possible NULL return value from argv_concat.
2005-01-23 * lib/command.[ch]: Make node_parent() function nonstatic. vtyh.c willhasso
use it as well. * vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already works in vty.
2005-01-182005-01-18 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.h: Test for SA_SIGINFO to see whether zlog_signal takes final two args (siginfo and program_counter). * log.c: (hex_append) Include this function only if SA_SIGINFO or HAVE_GLIBC_BACKTRACE is defined. (zlog_signal) Final two args (siginfo and program_counter) now depend on whether SA_SIGINFO is defined on this platform. * sigevent.c: (program_counter) Do not include this function if SA_SIGINFO is not defined on this platform. (exit_handler,core_handler) Test for SA_SIGINFO to decide whether 2nd & 3rd arguments are present and to decide how to invoke zlog_signal. (trap_default_signals) Test for SA_SIGINFO and invoke sigaction appropriately.
2005-01-172005-01-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.h: Change prototype for zlog_backtrace_sigsafe to take additional program_counter argument. * log.c: (zlog_backtrace_sigsafe) Add additional program_counter argument. If it is non-NULL, use backtrace_symbols_fd to resolve the address. (zlog_signal) Call zlog_backtrace_sigsafe with additional program_counter argument. [pullup candidate]
2005-01-16 * command.[ch], vty.c: cmd_execute_command() function must not attempthasso
to walk up in the node tree if called from vtysh. Different daemons might have commands with same syntax in different nodes (for example "router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons). * vtysh.c: Reflect changes in lib. cmd_execute_command() should know now that it's called from vtysh and must not attempt to walk up in the node tree. [pullup candidate]
2005-01-142005-01-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.c (print_version): Do not bother even to examine host.name, since it is always NULL when this function is called from main.
2005-01-142005-01-14 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* command.c (print_version): Don't print host.name if it is NULL. Fixes segfault on Solaris reported by Goetz von Escher <goetz@open.ch> (pullup candidate)
2005-01-122005-01-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* configure.ac: Test for header file <ucontext.h> (for use in signal processing). * sigevent.c: (trap_default_signals) Use the SA_SIGINFO flag to pass additional siginfo_t and ucontext_t arguments to core_handler and exit_handler. (core_handler,exit_handler) Now invoked with 3 arguments (using SA_SIGINFO). Pass additional info to zlog_signal. (program_counter) New function to find program counter in ucontext_t, needs to be enhanced to support more platforms (currently works only on Linux/x86). * log.h: Change the zlog_signal prototype to add new arguments siginfo_t * and program_counter. * log.c: (zlog_signal) Add new arguments siginfo and program_counter. Include si_addr and program counter (if non-NULL) in message. And remove #ifdef HAVE_GLIBC_BACKTRACE around hex_append, since that is now used to render the si_addr and PC pointers.
2005-01-122005-01-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: If not C99 and no va_copy macro available, fall back to memcpy (solves a build problem on FreeBSD 4.x).
2005-01-042005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* configure.ac: Added test for broken CMSG_FIRSTHDR macro (relevant for Solaris 8 and unpatched Solaris 9, don't know whether other platforms are affected). * zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined by the configure test program). * sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
2005-01-02Reverting some int -> unsigned int fixes in command.c for now. Fixes crashhasso
described in [quagga-dev 2292].
2004-12-30Add comment explaining about limit of 20 joined groups on a socket.gdt
2004-12-292004-12-29 Greg Troxel <gdt@poblano.ir.bbn.com>gdt
* sockopt.c (getsockopt_ipv4_ifindex): Document calling convention. Beef up comments. Handle the case where the cmsghdr has a zero controllen, or more specifically when the wanted option is not present. This is needed for Solaris 8, and in general for any platform for which configure finds a method and it can fail. Mark some changes with XXX to be cleaned up post 0.98.
2004-12-292004-12-29 Greg Troxel <gdt@poblano.ir.bbn.com>gdt
* sockopt.c (getsockopt_ipv4_ifindex): Return 0 when passed a NULL cmsghdr pointer. I believe this will avoid ospfd crashing on Solaris 8, which seems to define IP_RECVIF but not actually implement it.
2004-12-282004-12-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* sockopt.c: (setsockopt_ipv4_ifindex) Improve error message. When neither IP_PKTINFO nor IP_RECVIF is defined, make return value deterministic (-1).
2004-12-282004-12-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* thread.c: (funcname_thread_add_timer_msec) Reduce overflow risk.
2004-12-222004-12-21 Paul Jakma <paul.jakma@sun.com>paul
* stream.c: Dont allocate streams with 0 sized data buffers
2004-12-212004-12-21 Paul Jakma <paul.jakma@sun.com>paul
* if.h: Add more 'non-generic' IFF_ flags. * if.c: IFF_NOXMIT/IFF_VIRTUAL interfaces are 'loopback like'
2004-12-172004-12-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.c: (do_echo) Added new "echo" command, useful for watchdog pinging to make sure the daemon is responsive.
2004-12-172004-12-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* pid_output.c: (pid_output_lock) Eliminate static function, and just use the #ifdef to decide which version of the function to include. This eliminates a compilation problem with gcc4. And fix the non-fcntl version so that it actually compiles. Exit with status 1 instead of -1 on error.
2004-12-152004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* sigevent.c: (trap_default_signals) Ignore SIGPIPE instead of exiting.
2004-12-102004-12-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (zlog_signal,_zlog_assert_failed) Change logging level back to LOG_ERR instead of LOG_EMERG.
2004-12-092004-12-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c: (hex_append) No need to include this function if HAVE_GLIBC_BACKTRACE is not defined.
2004-12-09add XXX comment about hex_append being unused.gdt
(only used if HAVE_GLIBC_BACKTRACE, so perhaps ifdef it?)
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* prefix.c: (prefix_copy) Error message before abort should have severity LOG_ERR, not LOG_INFO. * memory.c: (mtype_log) Log level should be LOG_DEBUG, not LOG_INFO.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* {smux.c,zclient.c}: Change level of debug messages to LOG_DEBUG.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.c: (config_write_host) Note that "log trap" is deprecated when writing out the config.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* HACKING: Indicate that header files should be consulted for documentation, particularly logging levels in lib/log.h. * log.h: Document appropriate use of syslog logging priorities inside quagga.
2004-12-03Need RCS Id keyword.ajs
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* command.h: Remove fields log_stdout and log_syslog from struct host, since they are just trying to duplicate information in the zlog_default structure. Note that this fixes a bug since those fields were not registering any logging that was established in the initial call to openzlog (this affects only the zebra and ospf6d daemons). It is probably a bug to turn on any logging by default in the call to openzlog. * command.c: (config_write_host) Get logging info from zlog_default instead of now-removed fields host.log_stdout and host.log_syslog. (config_log_stdout,no_config_log_stdout) Do not set now-removed field host.log_stdout, since this info is recorded in zlog_default. (config_log_file) Use XSTRDUP (instead of strdup) to set host.logfile. (config_log_syslog,config_log_syslog_facility,no_config_log_syslog) Do not set now-removed field host.log_syslog, since this info is recorded in zlog_default.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-28Fix comment for zlog_backtrace_sigsafe: it now supports syslog loggingajs
on systems where /dev/log is a unix datagram socket.
2004-11-282004-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.h: Remove several unused fields from struct zlog. Add comments for other fields, and add one new field syslog_options that is used in the new syslog_sigsafe implementation. * log.c: (syslog_sigsafe) New function to send syslog messages in an async-signal safe way that can be used inside a signal handler. (syslog_connect) New function to connect to syslog daemon inside a signal handler. This function supports only systems where /dev/log is a unix datagram socket (e.g. not Solaris). (zlog_signal) Call syslog_sigsafe if syslog logging is enabled. (zlog_backtrace_sigsafe) Call syslog_sigsafe if syslog logging is enabled. (openzlog) Save syslog_options for use in syslog_sigsafe. (num_append) Fix bug: handle 0 properly. (hex_append) New function to print a u_long in hex format.
2004-11-28DEFUN_DEPRECATED passes attribute to DEFUN as well.hasso
2004-11-262004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* log.c, log.h, memory.c: Change function name from zlog_backtrace_safe to the more self-explanatory zlog_backtrace_sigsafe.
2004-11-262004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* debug.[ch]: Remove unused files. * Makefile.am: Remove references to debug.c and debug.h * ospf_main.c: Remove #include "debug.h" (was not being used, and lib/debug.h has now been deleted).