summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2009-12-09lib: fix warning on little endianStephen Hemminger
* md5.c * md5_calc(): If building on little endian then X will be 'const uint32_t' which causes compiler warning in code that never gets used. Just move the endif to make sure code is not checked.
2009-12-08lib: make match functions take const argsStephen Hemminger
* table.c: general type safety and compiler help: * maskbit[]: become const * route_node_match(): take const args * route_node_match_ipv4(): idem * route_node_match_ipv6(): idem * check_bit(): idem, plus adjust local vars typing
2009-12-07lib: remove unused function: route_dump_node()Denis Ovsienko
2009-12-07lib: log source of vty connections (bug #566)heasley
heasley: I've used this for a while to track usage.
2009-08-28lib/trivial: str2prefix checks return of inet_pton in fragile wayPaul Jakma
* prefix.c: (str2prefix_ipv6) inet_pton succesful return is presumed to be 1, rather than the "not zero" the man page describes - seemed fragile.
2009-08-28lib: if_lookup_by_name should be more robust to null argumentPaul Jakma
* if.c: (if_lookup_by_name) shouldn't crash just cause we got a NULL name
2009-07-28bgpd: start listener on first instanceStephen Hemminger
Start BGP listener only after first instance is started. This helps the security if BGP is not used but daemon is started. It also addresses some issues like MD5 not working on listener unless IPV6 configured (because listener was not in list); as well as compiler warnings. * bgp_network.c: (bgp_listener) listen socket creation consolidated here (bgp_socket) Use bgp_listener * bgpd.c: (bgp_get) call bgp_socket on creation of first struct bgp. (bgp_init) remove bgp_socket call. * memtypes.c: Add MTYPE_BGP_LISTENER
2009-07-19[bgpd] Stability fixes including bugs 397, 492Chris Caputo
I've spent the last several weeks working on stability fixes to bgpd. These patches fix all of the numerous crashes, assertion failures, memory leaks and memory stomping I could find. Valgrind was used extensively. Added new function bgp_exit() to help catch problems. If "debug bgp" is configured and bgpd exits with status of 0, statistics on remaining lib/memory.c allocations are printed to stderr. It is my hope that other developers will use this to stay on top of memory issues. Example questionable exit: bgpd: memstats: Current memory utilization in module LIB: bgpd: memstats: Link List : 6 bgpd: memstats: Link Node : 5 bgpd: memstats: Hash : 8 bgpd: memstats: Hash Bucket : 2 bgpd: memstats: Hash Index : 8 bgpd: memstats: Work queue : 3 bgpd: memstats: Work queue item : 2 bgpd: memstats: Work queue name string : 3 bgpd: memstats: Current memory utilization in module BGP: bgpd: memstats: BGP instance : 1 bgpd: memstats: BGP peer : 1 bgpd: memstats: BGP peer hostname : 1 bgpd: memstats: BGP attribute : 1 bgpd: memstats: BGP extra attributes : 1 bgpd: memstats: BGP aspath : 1 bgpd: memstats: BGP aspath str : 1 bgpd: memstats: BGP table : 24 bgpd: memstats: BGP node : 1 bgpd: memstats: BGP route : 1 bgpd: memstats: BGP synchronise : 8 bgpd: memstats: BGP Process queue : 1 bgpd: memstats: BGP node clear queue : 1 bgpd: memstats: NOTE: If configuration exists, utilization may be expected. Example clean exit: bgpd: memstats: No remaining tracked memory utilization. This patch fixes bug #397: "Invalid free in bgp_announce_check()". This patch fixes bug #492: "SIGBUS in bgpd/bgp_route.c: bgp_clear_route_node()". My apologies for not separating out these changes into individual patches. The complexity of doing so boggled what is left of my brain. I hope this is all still useful to the community. This code has been production tested, in non-route-server-client mode, on a linux 32-bit box and a 64-bit box. Release/reset functions, used by bgp_exit(), added to: bgpd/bgp_attr.c,h bgpd/bgp_community.c,h bgpd/bgp_dump.c,h bgpd/bgp_ecommunity.c,h bgpd/bgp_filter.c,h bgpd/bgp_nexthop.c,h bgpd/bgp_route.c,h lib/routemap.c,h File by file analysis: * bgpd/bgp_aspath.c: Prevent re-use of ashash after it is released. * bgpd/bgp_attr.c: #if removed uncalled cluster_dup(). * bgpd/bgp_clist.c,h: Allow community_list_terminate() to be called from bgp_exit(). * bgpd/bgp_filter.c: Fix aslist->name use without allocation check, and also fix memory leak. * bgpd/bgp_main.c: Created bgp_exit() exit routine. This function frees allocations made as part of bgpd initialization and, to some extent, configuration. If "debug bgp" is configured, memory stats are printed as described above. * bgpd/bgp_nexthop.c: zclient_new() already allocates stream for ibuf/obuf, so bgp_scan_init() shouldn't do it too. Also, made it so zlookup is global so bgp_exit() can use it. * bgpd/bgp_packet.c: bgp_capability_msg_parse() call to bgp_clear_route() adjusted to use new BGP_CLEAR_ROUTE_NORMAL flag. * bgpd/bgp_route.h: Correct reference counter "lock" to be signed. bgp_clear_route() now accepts a bgp_clear_route_type of either BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. * bgpd/bgp_route.c: - bgp_process_rsclient(): attr was being zero'ed and then bgp_attr_extra_free() was being called with it, even though it was never filled with valid data. - bgp_process_rsclient(): Make sure rsclient->group is not NULL before use. - bgp_processq_del(): Add call to bgp_table_unlock(). - bgp_process(): Add call to bgp_table_lock(). - bgp_update_rsclient(): memset clearing of new_attr not needed since declarationw with "= { 0 }" does it. memset was already commented out. - bgp_update_rsclient(): Fix screwed up misleading indentation. - bgp_withdraw_rsclient(): Fix screwed up misleading indentation. - bgp_clear_route_node(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_node_queue_del(): Add call to bgp_table_unlock() and also free struct bgp_clear_node_queue used for work item. - bgp_clear_node_complete(): Do peer_unlock() after BGP_EVENT_ADD() in case peer is released by peer_unlock() call. - bgp_clear_route_table(): Support BGP_CLEAR_ROUTE_MY_RSCLIENT. Use struct bgp_clear_node_queue to supply data to worker. Add call to bgp_table_lock(). - bgp_clear_route(): Add support for BGP_CLEAR_ROUTE_NORMAL or BGP_CLEAR_ROUTE_MY_RSCLIENT. - bgp_clear_route_all(): Use BGP_CLEAR_ROUTE_NORMAL. Bug 397 fixes: - bgp_default_originate() - bgp_announce_table() * bgpd/bgp_table.h: - struct bgp_table: Added reference count. Changed type of owner to be "struct peer *" rather than "void *". - struct bgp_node: Correct reference counter "lock" to be signed. * bgpd/bgp_table.c: - Added bgp_table reference counting. - bgp_table_free(): Fixed cleanup code. Call peer_unlock() on owner if set. - bgp_unlock_node(): Added assertion. - bgp_node_get(): Added call to bgp_lock_node() to code path that it was missing from. * bgpd/bgp_vty.c: - peer_rsclient_set_vty(): Call peer_lock() as part of peer assignment to owner. Handle failure gracefully. - peer_rsclient_unset_vty(): Add call to bgp_clear_route() with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. * bgpd/bgp_zebra.c: Made it so zclient is global so bgp_exit() can use it. * bgpd/bgpd.c: - peer_lock(): Allow to be called when status is "Deleted". - peer_deactivate(): Supply BGP_CLEAR_ROUTE_NORMAL purpose to bgp_clear_route() call. - peer_delete(): Common variable listnode pn. Fix bug in which rsclient was only dealt with if not part of a peer group. Call bgp_clear_route() for rsclient, if appropriate, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - peer_group_get(): Use XSTRDUP() instead of strdup() for conf->host. - peer_group_bind(): Call bgp_clear_route() for rsclient, and do so with BGP_CLEAR_ROUTE_MY_RSCLIENT purpose. - bgp_create(): Use XSTRDUP() instead of strdup() for peer_self->host. - bgp_delete(): Delete peers before groups, rather than after. And then rather than deleting rsclients, verify that there are none at this point. - bgp_unlock(): Add assertion. - bgp_free(): Call bgp_table_finish() rather than doing XFREE() itself. * lib/command.c,h: Compiler warning fixes. Add cmd_terminate(). Fixed massive leak in install_element() in which cmd_make_descvec() was being called more than once for the same cmd->strvec/string/doc. * lib/log.c: Make closezlog() check fp before calling fclose(). * lib/memory.c: Catch when alloc count goes negative by using signed counts. Correct #endif comment. Add log_memstats_stderr(). * lib/memory.h: Add log_memstats_stderr(). * lib/thread.c: thread->funcname was being accessed in thread_call() after it had been freed. Rearranged things so that thread_call() frees funcname. Also made it so thread_master_free() cleans up cpu_record. * lib/vty.c,h: Use global command_cr. Add vty_terminate(). * lib/zclient.c,h: Re-enable zclient_free().
2009-07-16[lib] Fix IPv6 normalisationStephen Hemminger
* lib/sockunion.c: (sockunion_normalise_mapped) The code to normalize address was not copying port value - probably reason why IPV4 in IPV6 never worked right.
2009-06-30[lib/cleanup] Use a typedef for the thread typePaul Jakma
* lib/thread.{c,h}: As per subject. This will avoid head-scratching for next person who adds a thread-type and gets strange breakage.
2009-06-23Fixes to RFC2385/MD5 BGPChris Caputo
* bgpd/bgp_network.c: Fix MD5 listen in IPv4 version of bgp_socket() by adding listen socket to listen_sockets list so that MD5 passwords can get set. * lib/sockopt.c: (sockopt_tcp_signature) Fix bogus "% Error while applying TCP-Sig to session(s)" / "can't set TCP_MD5SIG option" startup error messages by not returning error when there isn't one.
2009-06-18[configure] Refine CLOCK_MONOTONIC testPaul Jakma
* configure.ac: Check for the actual CLOCK_MONOTONIC symbol, as clock_gettime need not imply that clock type is supported * lib/zebra.h: use the method given in autoconf docs for sys/time.h inclusion
2009-06-18[cleanup] Allow message tables to be constantStephen Hemminger
Avoid bugs, and improve cache locality by allowing message lists to be read/only.
2009-06-18[cleanup] Use const in smux interfaceStephen Hemminger
smux_trap and oid_copy should allow read-only source.
2009-06-18[lib] Put symbolic backtrace on system logStephen Hemminger
When BGP crashes, sometimes all we get to see is syslog.
2009-06-18[lib] sockopt_tcp_signature: sin6 requires HAVE_IPV6Stephen Hemminger
An external user was building on system without IPv6 and it wouldn't work.
2009-06-18[gcc] Add gcc printf format checksStephen Hemminger
2009-06-12[cleanup] Make command nodes staticStephen Hemminger
The cmd_nodes used to configure vty, can mostly be static so (basic data hiding 101).
2009-06-12[cleanup] functions taking no args should be declared with void argsStephen Hemminger
Use Ansi-C prototypes rather than old K&R method of declaring function without arguments
2009-06-12[cleanup] add const attribute to lib/if.c::if_dumpStephen Hemminger
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2009-06-12[bgpd] Add support for the old Linux 2.4, TCP_MD5_AUTH RFC2385 patchPaul Jakma
* configure.ac: Add a --enable-linux24-tcp-md5 argument, to compile in support for the old TCP-MD5 patch for Linux 2.4 systems. This overrides auto-detection of TCP-MD5 supported by the target system. * lib/sockopt.c: (sockopt_tcp_signature) add in a variant for the old Linux 2.4, TCP_MD5_AUTH variant of TCP-MD5 support, conditional on the previous configure arg.
2009-06-02[snmp] Compiler warning fixes for when "--enable-snmp" is configured.Chris Caputo
Compiled on 32-bit and 64-bit linux gcc 4.1.2 platforms. No run-time testing on 32-bit and limited run-time testing on 64-bit.
2009-06-02[smux] 64-bit fix for lib/smux.h SNMP_INTEGER() macroChris Caputo
Macro SNMP_INTEGER() prepares data which is eventually processed by asn_build_int(). SNMP_INTEGER() was using "int32_t" whereas asn_build_int() uses "long". On 32-bit systems these are the same, both 4 bytes, but on x86 64-bit systems "long" is 8 bytes. asn_build_int()'s reaction to an improperly sized value is to return a NULL pointer. Quagga's smux.c would eventually get this NULL pointer and use it in calculations to determine how much data to send over the smux connection, resulting in garbage being sent to the SNMP agent. Corrected SNMP_INTEGER() to use "long". Tested on 32-bit and 64-bit x86 Linux 2.6.27.10 systems running Quagga 0.99.11 with bgpd smux.
2009-06-02[bgp] Fix crash on SIGHUP, deref of freed workqueuesSteve Hill
* lib/workqueue.c: free-ing workqueues had never been tested obviously, queue's thread was not being stopped * bgpd/bgpd.c: null out freed workqueues, to prevent acting on freed workqueues
2008-11-29[lib] Fix timer precision.Joakim Tjernlund
Whenever a thread adds an timer funcname_thread_add_timer_timeval() gets called to add the timer. Before adding the timer a quagga_gettimeofday() call is made to do some time house keeping. However quagga_gettimeofday() only updates recent_time, not relative_time that is used to calculate the alarm_time. Replace with quagga_get_relative (NULL)
2008-11-29[lib] Move type cast in Fletcher checksumJoakim Tjernlund
The int type cast should be on the whole expression passed to the mod operator. Otherwise it won't work when/if c0/c1 is unsigned. Making c0/c1 unsigned makes it possible to use 5802 as MODX value.
2008-11-24[lib] fix missing sockunion_normalise_mappedPaul Jakma
* lib/sockunion.c: (sockunion_accept) sockunion needs to be normalised here, as it used to before this was moved to a dedicated function..
2008-11-16[lib] Switch Fletcher checksum back to old ospfd versionPaul Jakma
* lib/checksum.c: (fletcher_checksum) Switch the second phase of the checksum back to the old ospfd logic. The isisd-derived version: a) is very hard to follow b) had some kind of subtle bug that caused it be wrong when c0=0 and c1=254 (potentially fixable by doing the mods before adjusting x and y) Additionally: - explicitely cast expressions using non-internal variables to int, to ensure the result is signed. - defensively change the length argument to 'size_t', to ensure the code works with that argument being unsigned.. Thanks to Joakim Tjernlund for the investigative work into this bug. * tests/test-checksum.c: new file to exercise the checksum code.
2008-09-09[lib] re-enable conversion of v6mapped INET6 sockunions to regular INETPaul Jakma
* lib/sockunion.c: Re-enable conversion of v6mapped INET6 sockunions to regular INET sockunions, which was disabled in 0df7c9, as it leads to failures in sockunion_cmp. (sockunion_normalise_mapped) consolidate here (sockunion_accept) remove conversion code altogether here - no sockunion is created (sockunion_get{sockname,peername}) normalise newly created sockunion.
2008-09-04Merge branch 'restricted-mode'Paul Jakma
2008-08-25Make --enable-snmp cross compile and make libcrypto optional with ↵Joakim Tjernlund
--without-crypto Autoconfig work by me, the rest was done by "Kirill K. Smirnov" <lich@math.spbu.ru>
2008-08-23[vty] Add support for a 'restricted mode' with anonymous vty connectionsPaul Jakma
* lib/command.h: Add a RESTRICTED_NODE, intended for use with anonymous, 'no login' vtys, to provide a subset of 'view' mode commands. * lib/command.c: Add RESTRICTED_NODE bits, nothing special, just following VIEW_NODE. * lib/vty.c: (vty_auth) enable authentication should fall back to restricted/view node as appropriate. (vty_create) init vty's to restricted/view node as appropriate, for the 'no login' case. (vty_{no_,}restricted_mode_cmd) config commands to enable 'anonymous restricted' in vty configuration. (vty_config_write) 'anonymous restricted' config. (vty_init) Install some commands to restricted mode, and the 'anonymous restricted' config commands into VTY_NODE. * bgpd/*.c: Install some of the safe(r) BGP commands into 'restricted mode', i.e. lookup commands of non-sensitive data. Useful with looking-glass route-servers.
2008-08-22[administrivia] Git should ignore backup files and .loT filesPaul Jakma
2008-08-22[trivia] Remove ChangeLog files, as this data is now maintained in SCMPaul Jakma
2008-08-22[warnings] Fix various SOS warningsPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * */*: Fix various problems flagged by Sun Studio compiler. - '<qualifier> <storage>' obsolescent in declarations - empty statements (';' after ALIAS definitions) - implicit declarations (e.g printstack in lib/log.c) - "\%" in printf string instead of "%%" - loops that return on the first iteration (legitimately, but compiler can't really know), e.g. bgp_routemap.c - internal declarations which mask prototypes.
2008-08-22[lib] Fix mistake in tcp-md5sig commit which broke compile on BSDPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * lib/sockopt.c: (sockopt_tcp_signature) ifdef'ing hid variable declaration for HAVE_DECL_TCP_MD5SIG && !GNU_LINUX, breaking compile - fix.
2008-08-22[lib] mes_lookup string lookup table argument should be marked constStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/log.{c,h}: struct message argument should point to const * */*.c: adjust to suit, Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[lib] hash compare function arguments ought to be const qualifiedStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/hash.h: (struct hash) Hash comparator callback really ought to treat storage behind arguments as constant - a compare function with side-effects would be evil. * */*.c: Adjust comparator functions similarly, thus fixing at least a few compiler warnings about const qualifier being dropped. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[lib] Add fletcher checksum implementationJingjing Duan
2008-08-13 Jingjing Duan <Jingjing.Duan@sun.com> * lib/checksum.?: (fletcher_checksum) implementation of Fletcher checksum, as per RFC1008. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[vty] Allow delete during password entryRoy
2008-08-13 roy <quagga@de.vio.us> * lib/vty.c: (vty_delete_char) move check for authentication down a bit, so we do the delete, but still not re-write of line. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma
2008-07-21[bgpd] TCP-MD5: password vty configuration and initial Linux supportPaul Jakma
2008-07-21 Paul Jakma <paul.jakma@sun.com> * bgp_packet.c: (bgp_open_receive) fix warning in a zlog call * bgp_vty.c: (bgp_vty_return) add return code * bgpd.c: (bgp_master_init) setup the socket list. * bgp_network.c: Remove the dual IPv4/6 socket thing for now, which was implemented by Michael, until such time as its clear its required for Linux (see sockopt comments). IPv6 support, including IPv4 sessions on AF_INET6 sockets, therefore is broken, and the '-l 0.0.0.0' arguments would need to be given to bgpd to make things work here. 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Tomohiko Kusuda <kusuda@inetcore.com> Leigh Brown <leigh@solinno.co.uk> * bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5 sockopt and bgpd. (bgp_md5_set_socket) Helper for bgp_connect (bgp_md5_set) setup TCP-MD5SIG for the given peer. (bgp_connect) call out to bgp_md5_set_socket for the outgoing connect socket. (bgp_socket) save references to the listen sockets, needed if TCP-MD5SIG is applied later or changed. * bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password' commands. * bgpd.c: (peer_{new,delete) manage TCP-MD5 password (peer_group2peer_config_copy) inherit TCP-MD5 password (peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5 passwords: applying checks, stopping peers, and trying to return errors to UI, etc. (bgp_config_write_peer) save password. Fix missing newline in writeout of neighbor ... port. 2008-07-21 Paul Jakma <paul.jakma@sun.com> * sockunion.c: ifdef out various places that converted v4mapped sockets to pure v4. Doesn't seem necessary at all, presumably a workaround for now historical inet_ntop bugs (?) 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> * sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
2008-06-07[lib] trivial: add const qualifier to stream_put/writePaul Jakma
2008-06-07 Paul Jakma <paul@jakma.org> * stream.{c,h}: (stream_{put,write}) add const qualifier to source argument. Change u_char to void *.
2008-06-02+ initial edition of meta-queue for RIB updates processing (bug #431)Denis Ovsienko
2008-05-29[zebra/linux] Use BPF to filter out responses, to try avoid netlink overrunsPaul Jakma
2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_install_filter) BPF filter to catch and drop responses to zebra's own route messages. (kernel_init) add BPF filter on the netlink socket.
2008-02-28[lib] Fix the struct message LOOKUP function to be more robustPaul Jakma
2008-02-28 Paul Jakma <paul.jakma@sun.com> * log.c: (mes_lookup) Sowmini Varadhan diagnosed a problem where this function can cause a NULL dereference, on lookups for unknown indices, or messages with NULL strings. Can occur, e.g., debug logging code when processing received messages. Fixed to accept a pointer to a default string to be used if there is no match. * log.h: LOOKUP adjusted to match
2008-02-28[lib/linklist] Enforce "nodes must have data" invariant more rigorouslyPaul Jakma
2008-02-28 Paul Jakma <paul.jakma@sun.com> * linklist.c: This implementation expects that the data pointer not be null, e.g. listgetdata() asserts this. The list add methods don't apply the same sanity check. Noted by Jim Carlson in bug #437.
2008-02-26[c++] remove/rename some names in headers that clash with C++ reserved wordsPaul Jakma
2008-01-30 Peter Szilagyi <sp615@hszk.bme.hu> * lib/stream.h: Remove named 'new' parameter in prototype for c++ header compatibility. * ospfd/ospf_opaque.h: ditto * ospfd/ospfd.h: Renamed struct export to _export for c++ header compatibility. * ospf6d/ospf6_area.h: ditto
2008-01-11[link-detect] Improve BSD support.Andrew J. Schorr
2008-01-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * lib/zebra.h: Revert previous change, no need to include <net/if_media.h> here. * zebra/ioctl.c: If HAVE_BSD_LINK_DETECT is defined, include <net/if_media.h> (if_get_flags) Remove debug messages about BSD link state. * zebra/kernel_socket.c: (bsd_linkdetect_translate) If link state is unknown, we should set the IFF_RUNNING flag.