| Age | Commit message (Collapse) | Author |
|---|
|
* stream.c: Dont allocate streams with 0 sized data buffers
|
|
* if.h: Add more 'non-generic' IFF_ flags.
* if.c: IFF_NOXMIT/IFF_VIRTUAL interfaces are 'loopback like'
|
|
* command.c: (do_echo) Added new "echo" command, useful for
watchdog pinging to make sure the daemon is responsive.
|
|
* pid_output.c: (pid_output_lock) Eliminate static function, and just
use the #ifdef to decide which version of the function to include.
This eliminates a compilation problem with gcc4. And fix the
non-fcntl version so that it actually compiles. Exit with
status 1 instead of -1 on error.
|
|
* sigevent.c: (trap_default_signals) Ignore SIGPIPE instead of exiting.
|
|
* log.c: (zlog_signal,_zlog_assert_failed) Change logging level back to
LOG_ERR instead of LOG_EMERG.
|
|
* log.c: (hex_append) No need to include this function if
HAVE_GLIBC_BACKTRACE is not defined.
|
|
(only used if HAVE_GLIBC_BACKTRACE, so perhaps ifdef it?)
|
|
* prefix.c: (prefix_copy) Error message before abort should
have severity LOG_ERR, not LOG_INFO.
* memory.c: (mtype_log) Log level should be LOG_DEBUG, not LOG_INFO.
|
|
* {smux.c,zclient.c}: Change level of debug messages to LOG_DEBUG.
|
|
* command.c: (config_write_host) Note that "log trap" is deprecated
when writing out the config.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* HACKING: Indicate that header files should be consulted for
documentation, particularly logging levels in lib/log.h.
* log.h: Document appropriate use of syslog logging priorities
inside quagga.
|
|
|
|
* command.h: Remove fields log_stdout and log_syslog from struct host,
since they are just trying to duplicate information in the
zlog_default structure. Note that this fixes a bug since those
fields were not registering any logging that was established
in the initial call to openzlog (this affects only the zebra and
ospf6d daemons). It is probably a bug to turn on any logging by
default in the call to openzlog.
* command.c: (config_write_host) Get logging info from zlog_default
instead of now-removed fields host.log_stdout and host.log_syslog.
(config_log_stdout,no_config_log_stdout) Do not set now-removed field
host.log_stdout, since this info is recorded in zlog_default.
(config_log_file) Use XSTRDUP (instead of strdup) to set host.logfile.
(config_log_syslog,config_log_syslog_facility,no_config_log_syslog)
Do not set now-removed field host.log_syslog, since this info is
recorded in zlog_default.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
on systems where /dev/log is a unix datagram socket.
|
|
* log.h: Remove several unused fields from struct zlog. Add comments
for other fields, and add one new field syslog_options that is
used in the new syslog_sigsafe implementation.
* log.c: (syslog_sigsafe) New function to send syslog messages in
an async-signal safe way that can be used inside a signal handler.
(syslog_connect) New function to connect to syslog daemon inside a
signal handler. This function supports only systems where /dev/log
is a unix datagram socket (e.g. not Solaris).
(zlog_signal) Call syslog_sigsafe if syslog logging is enabled.
(zlog_backtrace_sigsafe) Call syslog_sigsafe if syslog logging is
enabled.
(openzlog) Save syslog_options for use in syslog_sigsafe.
(num_append) Fix bug: handle 0 properly.
(hex_append) New function to print a u_long in hex format.
|
|
|
|
* log.c, log.h, memory.c: Change function name from zlog_backtrace_safe
to the more self-explanatory zlog_backtrace_sigsafe.
|
|
* debug.[ch]: Remove unused files.
* Makefile.am: Remove references to debug.c and debug.h
* ospf_main.c: Remove #include "debug.h" (was not being used, and
lib/debug.h has now been deleted).
|
|
* log.c: (zlog_backtrace) New function to log a backtrace.
(zlog_backtrace_safe) Log a backtrace in an async-signal-safe way.
Unfortunately, this function does not support syslog logging yet.
(zlog_signal) Move backtrace code into separate function
zlog_backtrace_safe.
(_zlog_assert_failed) Call zlog_backtrace before aborting.
* log.h: Declare new functions zlog_backtrace and zlog_backtrace_safe.
* memory.c: (zerror) Call zlog_backtrace before aborting.
|
|
* Makefile.am: Need to add zassert.h to pkginclude_HEADERS.
|
|
to stdarg handling.
|
|
* zebra.h: If not C99 and there's no va_copy macro and there is
a __va_copy macro, define va_copy as __va_copy.
|
|
* pid_output.c: (pid_output_lock) Fix 2 bugs: when locking, should
set l_whence to SEEK_SET, not SEEK_END. And after writing new
pid to file, must ftruncate to eliminate any extraneous bytes left
over from the last time a pid was written.
|
|
to be safe.
|
|
|
|
* zassert.h: New header file to declare a quagga-specific assert macro.
* log.c: (_zlog_assert_failed) New function called when assert fails
to log the error and abort.
* zebra.h: Include "zassert.h" instead of <assert.h>.
* regex.c: Include "zassert.h" instead of <assert.h>.
* dict.c: Include "zassert.h" instead of <assert.h>.
|
|
* sigevent.c: (signal_init) Set up some default signal handlers
so that processes will issue an error message before terminating
or dumping core.
(trap_default_signals) New function to set up signal handlers
for various signals that may kill the process.
(exit_handler) Call zlog_signal, then _exit.
(core_handler) Call zlog_signal, then abort.
* log.h: Declare new function zlog_signal.
* log.c: (zlog_signal) New function to log information about
a received signal before the process dies. Try to log a
backtrace also.
(quagga_signal_handler,signal_set) Should be static.
|
|
* log.c: (vzlog) Take a single va_list argument and use va_copy
as necessary for multiple traversals.
(zlog) Pass only one va_list to vzlog.
(zlog_*,plog_*) Use a macro for boilerplate code; pass only one
va_list to vzlog.
(zlog_set_file) Remove unused 2nd argument (flags).
(zlog_save_cwd,zlog_get_cwd,zlog_free_cwd) Remove unused functions.
* log.h: Remove ZLOG_*_INDEX defines (no longer used).
Remove unused 2nd argument from zlog_set_file prototype.
Fix prototype for zlog_rotate.
* command.c: (config_log_file) Remove unused 2nd arg to zlog_set_file.
* vty.c: (vty_out) Fix stdarg usage to perform multiple traversals
properly.
(vty_log) Must use va_copy for multiple traversals of va_list arg.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
|
|
* log.c: (safe_strerror) New function: safe wrapper for strerror.
|
|
* sockopt.c: (setsockopt_so_recvbuf) Stop error message from being
printed every time.
|
|
* memory.h: Fix prototype for memory_init().
* memory.c: Declare many functions and data structures static instead
of global. Fix prototype for memory_init().
|
|
in lib/zebra.h, ensure that RFC3542-required CMSG_SPACE and CMSG_LEN
are defined. Warn if alignment assumptions are made, since they are
i386-centric.
in lib/sockopt.h, declare that sockopt sizes are without
CMSG_SPACE-required padding - just simple sizeof.
in ospfd/ospf_packet.c, simply use CMSG_SPACE
This should remove all instances of CMSG_ALIGN from the source code.
This is a nonstandard, though rational, construct; quagga should use
only those defines in RFC3542.
|
|
* memory.c: (zerror) Use zlog_err instead of fprintf to stderr.
Instead of exiting, log currenty memory usage and then abort.
(log_memstats) New function to log memory statistics, called by
zerror.
(show_memory_all) Loop over new mlists array instead of calling
show_memory_vty separately for each memory_list.
|
|
|
|
|
|
* buffer.c: Add missing include of log.h.
(buffer_flush_available) written is compared against
mostly against unsigned types, only for the writev do we need
signed compare, so declare it as size_t and cast it to ssize_t
just for the error compare when we've called writev.
* buffer.h: Add comment that buffer data sizes really should be
size_t.
|
|
* lib/version.h.in: add autoconf configure_input output var
|
|
* vty.h: Remove fields in struct vty that were related to VTY_CONTINUE
capabilities (that were used only in bgpd/bgp_route.c and are now
removed). Also remove some other fields that were not being
used at all.
* vty.c: (vty_execute) Do not test for obsolete status values VTY_START
and VTY_CONTINUE.
(vty_read) Remove calls to vty->output_func since that was part
of the VTY_CONTINUE infrastructure that has been removed.
(vty_flush) Remove code to support VTY_START and VTY_CONTINUE.
(vty_close) Remove code to cancel vty->t_output thread, since that
thread was never actually used.
* bgp_route.c: Remove all code related to VTY_CONTINUE; this feature
is deprecated because the output did not represent a single point
in time. All output needs to be generated inline and buffered
by the library code.
(route_vty_out,route_vty_out_tag,damp_route_vty_out,
flap_route_vty_out) Remove code to count number of lines of output,
since this was only useful for VTY_CONTINUE behavior.
(bgp_show_callback) Removed.
(bgp_show_table) Remove hooks for VTY_CONTINUE callback support.
As a result, there's a new output_arg argument to this function.
Make function static.
(bgp_show) Make function static and add a new output_arg argument.
Change all functions that call bgp_show or bgp_show_table to
pass the new output_arg argument (that used to be passed inside
vty->output_arg).
* bgp_mplsvpn.c: Remove declarations of functions defined in
bgp_route.c; these declarations belong in bgp_route.h.
* bgp_route.h: Declare 3 global functions used in both bgp_route.c
and in bgp_mplsvpn.c.
|
|
* vty.c: Vtysh connections to daemons should use buffering.
(vty_out) Remove exception for vty_shell_serv, just use buffer_write.
(vty_new) Increase output buffer size to 4096 rounded up to a
multiple of pagesize.
(vtysh_read) After command has been executed and all output buffered,
call buffer_flush_available and schedule further writes if the
buffers are not yet empty.
(vtysh_write) New function to flush output to vtysh when the socket
is writeable.
(vty_event) Added new VTYSH_WRITE event for flushing buffers to vtysh
clients. Also, should save read thread in vty->t_read so the
thread can be cancelled in vty_close.
* buffer.h: In struct buffer_data, remove unused "parent" field.
Convert "unsigned char *data" to "unsigned char data[0]" to save
a malloc. Declare new function buffer_flush_available that works
with non-blocking sockets.
* buffer.c: (buffer_data_new) Use a single malloc now that data is
a variable-size array at end of structure.
(buffer_data_free) Just a single free now that data is part of the
structure.
(buffer_write) Simplify the logic to make behavior more transparent.
(buffer_flush) Decrease b->length as data is written out.
(buffer_flush_vty_all) Decrease b->length as buffers are freed.
(buffer_flush_vty) Decrease b->length as data is written out.
(buffer_flush_available) New function to flush non-blocking sockets.
|
|
with CVS trees.
|
|
* sockopt.c: (setsockopt_pktinfo) remove, its unused.
|
|
* thread.c: Use XCALLOC and sizeof the type, not the pointer.
|
|
* smux.c: fix int to size_t compile warnings
|
|
* memory.h: Add MTYPE_THREAD_FUNCNAME and MTYPE_THREAD_STATS
* thread.c: Update stats and funcname alloc/free to use previous
specific memory type defines
|
|
* keychain.c: Convert some more strtoul users to VTY_GET_INTEGER.
|
