| Age | Commit message (Collapse) | Author |
|---|
|
Conflicts:
bgpd/bgp_route.c
|
|
Change interface up/down notification messages to also include the
hardware address of the interface. The format of these messages is now
identical to the interface add message -- move the serialization code
to common functions.
* lib/zclient.c: Modify zebra_interface_if_set_value() to also parse
the hardware address. Invoke it from zebra_interface_add_read()
and and zebra_interface_state_read().
* zebra/zserv.c: Add zserv_encode_interface(). Invoke it from
zserv_interface_add(), zserv_interface_delete() and
zserv_interface_update().
|
|
* lib/if.c: Change if_delete_retain() to delete all connected
addresses, but to not free the list that holds them. Free the list
just before the interface structure itself is freed, in
if_delete().
|
|
|
|
* lib/stream.[ch]:
- Add stream_set_endp(). This can be used to trim data (for
example, padding) at the end of a stream.
- Fix swapped 'getp' and 'endp' parameters in STREAM_WARN_OFFSETS.
From: Subbaiah Venkata <svenkata@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/md5.[ch] Add implementation of HMAC-MD5 from RFC 2104.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/linklist.h
- Change the listnextnode, listhead and listtail macros so that
they allow the list pointer to be NULL.
- Modify the ALL_LIST_ELEMENTS* macros such that they clear the
data pointer at the beginning and end of the loop.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
nonwithstanding any desire for optimisation, these versions are shorter
and more concise. reading the comments, they might even be easier to
understand.
I've tested them on i686 and x86_64, and checked that correct assembler
code is emitted for ARM, MIPS and PowerPC.
IPv6 is left as an exercise for another day, none of the ideas I had led
to a "yes, this is the one to go with" solution.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
This reverts commit d171bf58ef12ace43d48565e6870722dece1e6ed.
There are multiple reasons for this revert, including bug #720, but also
quite simply the unreadability of having 2000 lines of an autogenerated
table in the middle of a source file.
Signed-off-by: David Lamparter <equinox@diac24.net>
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
|
|
|
|
|
|
* Initial import of the Babel routing protocol, ported to Quagga.
* LICENCE: Update the original LICENCE file to include all known potentially
applicable copyright claims. Ask that any future contributors to babeld/
grant MIT/X11 licence to their work.
* *.{c,h}: Add GPL headers, in according with the SFLC guidance on
dealing with potentially mixed GPL/other licensed work, at:
https://www.softwarefreedom.org/resources/2007/gpl-non-gpl-collaboration.html
|
|
While defining two "maskbytes" arrays for the respective endiannesses,
the code was unconditionally using one that only worked on little endian
systems.
Use preprocessor macros to avoid the somewhat expensive
htonl/ntohl macros.
From: Renato Westphal <renatowestphal@gmail.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* thread.c: (thread_timer_process,thread_process) thread_list_delete nulls
thread->next. Loops need to save next first, or will only process the head.
Problem noted by Lou Berger <lberger@labn.net>.
|
|
|
|
* lib/thread.h: new timer macro, millisecond precision
(this was cherrypicked from pimd to isolate all non-contained changes)
From: Everton Marques <everton.marques@gmail.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* Replace command "isis passwd" with "isis passwd {clear|md5}"
* Verify HMAC MD5 on ISIS Hello PDUs
* Add HMAC MD5 authentication to md5.h/md5.c from RFC2104
|
|
This patch contains the following:
1. Addition of IPv6 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.
2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
|
|
This patch contains the following:
1. Addition of IPv4 SAFI_MULTICAST BGP routes into the BGP Multicast RIB.
2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the BGP Multicast RIB.
|
|
|
|
* if.c: (if_dump) loop that doesn't do anything, wants to be
before the zlog of what it's meant to print out so all the connected
addresses get printed out. Trival: just a debug function
|
|
* (general) Move functions in headers into files, to be compiled into
shared object files. Remove inline qualifier from functions. Let the
compiler do the work.
|
|
...otherwise 4294967295 is not a valid value on 32bit systems
|
|
IPV4_ADDR_SAME() wasn't passed the right union member, this could cause
a bug due to strict-aliasing. IPV6_ADDR_SAME() case got its fix before
the error could be created by macro upgrade.
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): make consistent with counterpart macros
* bgp_packet.c
* bgp_open_receive(): test using macro instead of ">="
* bgp_route.c
* bgp_update_rsclient(): idem
* bgp_update_main(): idem
|
|
ZEBRA_HELLO message is used by routing daemons to inform zebra
what type of routes daemon will be announcing to zebra. Also
zebra uses route_type_oaths array to track which daemon announces
which protocol. Zebra mops up routes if daemon didn't for some
reason.
|
|
ip_masklen() was likely to return incorrect results after being compiled
with -fstrict-aliasing (-O2, -O3, -Os)
|
|
The new implementation makes use of a 64KB mapping table, which makes it
possible to compute masklen faster and with constant execution time. The
map also allows for additional version of the function, which can detect
errors in input argument.
The previous implementation had a variable cost of execution, which
depended on masklen in a non-linear manner, and at its worst (/31) was
4 times slower, than the new implementation. The only case of old
function just slightly outperforming the new one is /0, which is of
little practical interest.
|
|
Experience with IPv4 counterpart of this function suggests, that
this way of type-punning is likely to cause errors.
|
|
(This patch was modified to leave calls to stream_getl() in place, they
are necessary for the stream's internal pointer to advance to the
correct position. -- Denis)
Signed-off-by: Denis Ovsienko <infrastation@yandex.ru>
Fix gcc warnings about varables that are set but never used.
* bgpd/bgp_attr.c
* cluster_unintern(): ret
* transit_unintern(): ret
* bgp_attr_default_intern(): attre
* bgp_mp_reach_parse(): rd_high, rd_low
* bgpd/bgp_route.c
* bgp_announce_check_rsclient(): bgp
* bgpd/bgp_zebra.c
* zebra_read_ipv4(): ifindex
* zebra_read_ipv6(): ifindex
* bgpd/bgpd.c
* bgp_config_write_peer(): filter
* lib/distribute.c
* distribute_list_all(): dist
* distribute_list(): dist
* distribute_list_prefix_all(): dist
* distribute_list_prefix(): dist
* lib/if_rmap.c
* if_rmap(): if_rmap
* lib/vty.c
* vty_accept(): vty
* lib/zclient.c
* zclient_read(): ret
* zebra/irdp_interface.c
* if_group(): zi
* zebra/rt_netlink.c
* kernel_read(): ret, sock
|
|
|
|
|
|
|
|
|
|
|
|
|
|
getaddrinfo returns a list of socket parameters for listening. it
will contain both IPv4 and IPv6 listening sockets. unless we use
IPV6_V6ONLY on the IPv6 ones, only the socket listed first will
work. if the IPv4 one came first, the IPv6 one would get an
"Address in use" error.
this functionality was already present for bgpd and its listening
sockets. as it is needed for vtys as well, make it a common helper.
Conflicts:
lib/sockunion.c
|
|
this replaces most occurences of routing protocol lists by preprocessor
defines from route_types.h. the latter is autogenerated from
route_types.txt by a perl script (previously awk). adding a routing
protocol now is mostly a matter of changing route_types.txt and log.c.
Conflicts:
lib/route_types.awk
|
|
|
|
lib/zclient.c: using of HAVE_TCP_ZEBRA in zclient_socket_*
definitions extended by else clause.
|
|
All daemons modified to support custom path to zserv
socket.
lib: generalize a zclient connection
zclient_socket_connect added. zclient_socket and
zclient_socket_un were hidden under static expression.
"zclient_serv_path_set" modified.
|
|
Make progname a string, and cast when calling asn1.
Remove variable set but never used.
|
|
The if_dump code had empty loop, that caused set-never-used warning.
|
|
If the vty_serv_sock_addrinfo is being used, then vty_serv_sock_family
is unsed. Fix by adjusting ifdef/else/endif
|
|
Change sockunion_log() to not use strdup(). This fixes a small memory
leak that occurs on every failed connect(), and is simpler/cleaner.
|
|
The delete_hook was being run after calling access list delete function.
This would cause ospf to dereference a NULL, in ospf_filter_update
because 'access->name' was already freed.
See also:
https://bugzilla.vyatta.com/show_bug.cgi?id=7654
|
|
prefix2sockunion converts a struct prefix* to a union sockunion *;
prefix_common_bits counts the number of common bits in the prefix's
address part.
|
|
|
|
IPv6 supports the same concept of differentiated service for routing
protocols as IPv4, but like too many things, the standards committee
decided that having two names for the same thing wasn't good enough and
introduced a third more generic term transport class.
The socket option to set transport class works the same as IPv4, but the
arguments are different.
* lib/sockopt.[ch]
* setsockopt_ipv6_tclass(): new function
* bgpd/bgp_network.c
* bgp_connect(): set socket option
* bgp_listener(): set socket option
* ospf6d/ospf6_network.c
* ospf6_set_transport_class(): new function
* ospf6_serv_sock(): set socket option
* ripngd/ripngd.c
* ripng_make_socket(): set socket option
|
|
* lib/prefix.h
* IPV4_CLASS_DE(): new helper macro
* bgp_attr.c
* bgp_attr_nexthop(): add check for "partial" bit, refresh flag error
reporting, explain meaning of RFC4271 section 6.3 and implement it
Conflicts:
bgpd/bgp_attr.c
|
