| Age | Commit message (Collapse) | Author |
|---|
|
Add support for keyword commands.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
|
|
As there are timeframes when we don't get a notification from the kernel
about new addresses. (e.g. while Linux performs IPv6 DAD), we need to
have some information whether an address has been sent to the kernel or
not.
One case where this is relevant would be a user adding an IPv6 address,
but deleting it before DAD has been complete. With the next patch which
removes some (ill assuming) synchronous parts in address setup,
ipv6_address_uninstall would not know whether or not it has to actually
delete the prefix from the kernel. Resolving these windows where we lack
information is what the flag ZEBRA_IFC_QUEUED is intended for.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
I've used offsetof() in the previous commit to paper over the security
problems in ospf_api.c. This blows the build on FreeBSD 7.0, missing
offsetof(). Let's add that to zebra's generally used includes.
stddef.h (and offsetof) is defined in C89 section 4.1.5 (and not
deprecated/removed by any later standard). If this causes problems, the
bug report should go against the host OS/compiler...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Register the vtysh socket in Vvty_serv_thread so it will be
correctly closed on vty_reset instead of being leaked.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
While the actual build failures have been fixed independently by
d1d3ac9 "build: reorder libraries to address linker error", libzebra
still does not reference libcap. This will lead to more build failures
if someone else tries to use libzebra and doesn't add libcap.
Let's just add libcap here and be done with it.
I've not added libcap to the _DEPENDENCIES variable above since libcap
is a system library. Actually, the whole _DEPENDENCIES thing is rather
fishy; automake automatically sets _DEPENDENCIES from _LIBADD. For the
sake of not breaking stuff that works (especially since most autotools
stuff is arcane magic), I'm leaving it alone...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
the original version of this had issues with tagless repositories; to
fix that I removed the "-g" part from one of the regexes. I then failed
to add those 2 characters back, leading to version numbers like
"0.99.220123456" instead of "0.99.22-ga123456". Let's put the "-g"
back...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Dynamically grow the hash table index if the chains get too long.
If expansion doesn't help keep chain length short, then stop expanding,
to avoid bad behavior if there is a poor hash function.
Not a new idea, based on concepts in uthash.
Depends on my previous patch to restrict hash to power of 2.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
[profiling results: sum of cycles spent in hash_get/jhash with RIPE RIS
test data (single simple BGP peer) improved to 69% of previously spent]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
By forcing the hash table size to be a power of 2, a potentially
expensive divide can be replaced by a mask operation. Almost all
usage of the hash table was using default size of 1024. Only places
with different size was thread library (1011) and bgp aspath.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Quagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly
on other systems as well). Particularly, sizeof(struct sockaddr_dl)
returns a size that does not include the full sdl_data field, leading to
not enough data being copied. This breaks IPv6 RAs in particular, as
a broken mac address from sockaddr_dl will be included in the packets.
From: Matthias-Christian Ott <ott@mirix.org>
Tested-by: Uwe Toenjes <6bone@6bone.informatik.uni-leipzig.de>
[further simplified + more comments]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Newer MacOSX versions have support for both IPv6 advanced socket API
RFCs (2292 and 3542) switchable in compile time, but neither of these
is default for some strange reason. RFC3542 will be default in future,
but for now we have to declare that we want to use the RFC3542 API
before including <netinet/in.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Invalid BGP Notification messages should be logged locally, cf.
RFC4271, Sect. 6.4, p 34,
NOTIFICATION Message Error Handling
Current notification for invalid Notification code:
2012/10/10 02:17:54 BGP: message index 10 not found in bgp_notify_msg (max is 8)
2012/10/10 02:17:54 BGP: 192.168.1.1 received NOTIFICATION 10/0 ((no item found)) 0 bytes
the logging should be a bit more clear. The above logging really doesn't
explain much and looks more like a programming error.
[rewrote most of it to get in something I can call a shape -David]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
ALL_LIST_ELEMENTS is checking node == NULL twice, which is causing a
whole slew of false positives in Coverity. In this particular case,
addressing this in the code is reasonable; being a macro, this appears
all over the place without easy remedy.
Acked-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
There are systems with no /bin/true - it might have different path
(/usr/bin/true) or even a shell builtin.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The VTY_GET_INTEGER_RANGE macro was being used also just to check the range
on a variable that wasn't used (for the "no" version of a VTY command), so I
split the macro into two. Also, since the variable is unsigned, if MIN is
zero, you get a warning about comparing an unsigned number against 0, giving
rise to slightly convoluted logic. Note that the previous two patches were
found by the -Wtype-limits and -Wunused-variables warnings. Without the
changes to these macros, these warnings are triggered erroneously, making it
harder to find the real problems.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
|
|
automake file lists haven't quite kept up with recent changes, time to
fix them up so the dist tarball actually works...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
If enabled with --with-pkg-gitversion on ./configure, this will append
git version strings and branch information at the following places:
- overall version number: 0.99.21-g0123456
- login motd and show version: tag information + git id + branches
Sample output:
Hello, this is Quagga (version 0.99.21-g14b49ad-dirty).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
This is a git build of quagga_0_99_21_release-106-g14b49ad-dirty
Associated branch(es):
local:master
[v2]: fix build without gitinfo (add "else" branch)
[v2]: fix for repos without any tags (different git describe output)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Bring in sys/queue.h from the FreeBSD tree as lib/queue.h.
This header implements lists of various flavors using inline
linkages. The imported file corresponds to SVN revision 221843 (url
below) and is available under the terms of the New BSD license
(3-clause).
http://svnweb.freebsd.org/base/head/sys/sys/queue.h?revision=221843
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/zebra.h
Add macro ZEBRA_NUM_OF, which returns the number of elements in a
static array.
* zebra/rib.h
Add the rib_tables_iter_t structure and associated functions,
which allow one to walk all tables in the rib.
* zebra/zebra_rib.c
- Add vrf_id_get_next() to retrieve the first VRF id (if any) that
is greater than a given VRF id.
- Add rib_tables_iter_next().
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Add some code that allows us to determine which VRF and AFI/SAFI a
given RIB table corresponds to.
* zebra/rib.h
Add rib_table_info_t structure, which contains information about
the VRF, AFI and SAFI that a table is for.
* zebra/zebra_rib.c
- Add the vrf_table_create() function, which creates a table and
sets its 'info' pointer to a newly created rib_table_info_t.
The 'info' pointer allows us to go from a route_node or a table
to the associated vrf.
- vrf_alloc(): Use vrf_create_table() to create tables.
* lib/memtypes.c
Add memory type for rib_table_info_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Add the rib_dest_t structure to hold per-prefix state in the routing
information base. This gives us an appropriate place to maintain the
queueing state of a route_node. Queuing state was previously being
stored on the first rib in the list of ribs hanging off the
route_node.
* zebra/rib.h
- Add new structure rib_dest_t.
- Remove the rn_status field from 'struct rib', it is no longer
required.
- Add macros (RNODE_FOREACH_RIB, RNODE_FOREACH_RIB_SAFE) for
walking all 'struct ribs' corresponding to a route_node. These
hide the fact that there is an intermediate rib_dest_t
structure.
- Add a few utility inlines to go between a rib_dest_t and
associated structures.
* zebra/zebra_rib.c
- rib_link()/rib_unlink()
Tweak for new behavior, where the 'info' pointer of a route_node
points to a rib_dest_t. The list of ribs for a prefix now hangs
off of the dest.
Change the way we ref count route_nodes. We now hold a single
ref count on a route_node if there is a corresponding
rib_dest_t.
- Maintain the queuing state of a route_node on the flags field of
the rib_dest_t.
- Add the rib_gc_dest() function, which deletes a rib_dest_t if it
is no longer required. A rib_dest_t can be deleted iff there are
no struct ribs hanging off of it.
- Call rib_gc_dest() any time we unlink a rib from the
rib_dest_t. Currently we only need to call it once, just before
we return from rib_process().
* zebra/{redistribute,zebra_rib,zebra_snmp,zebra_vty}.c
Use new macros to walk over route_node ribs.
* lib/memtypes.c
Add memory type for rib_dest_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
There is no Posix CLOCK_MONOTONIC in Darwin, but monotonically
increasing clock can be implemented using mach_absolute_time().
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Mac OS X needs HAVE_IP_HDRINCL_BSD_ORDER defined like BSD. If it's not
defined, it'll fail like this:
*** sendmsg in ospf_write failed to 224.0.0.5, id 0, off 0, len 64,
interface en0, mtu 1500: Invalid argument
Which is caused by reordering iph->ip_len in
sockopt_iphdrincl_swab_htosys.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Use the array_size() helper macro. Replaces several instances of local
macros with the same definition.
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
implement array_size as sizeof(array) / sizeof(array element)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/stream.c: (stream_set_endp) Add checks to make sure that the
supplied 'endp' is within the 'size' of the stream, and that the
current read pointer 'getp' is not beyond the specified 'endp'.
|
|
OVERVIEW
The checksum used in OSPF (rfc2328) is specified in rc905 annex B. There is an
sample implementation in rfc1008 which forms the basis of the quagga
implementation. This algorithm works perfectly when generating a checksum;
however, validation is a bit problematic.
The following LSA (generated by a non-quagga implementation) is received by
quagga and marked with an invalid checksum; however, it passes both the rfc905
and rfc1008 validation checks.
static uint8_t lsa_10_121_233_29[] = {
0x0e, 0x10, 0x02, 0x03,
0x09, 0x00, 0x35, 0x40,
0x0a, 0x79, 0xe9, 0x1d,
0x80, 0x00, 0x00, 0x03,
0x00, 0x8a, 0x00, 0x1c,
0xff, 0xff, 0xff, 0xe0,
0x00, 0x00, 0x36, 0xb0
};
LS Type: Summary-LSA (IP network)
LS Age: 3600 seconds
Do Not Age: False
Options: 0x02 (E)
Link-State Advertisement Type: Summary-LSA (IP network) (3)
Link State ID: 9.0.53.64
Advertising Router: 10.121.233.29 (10.121.233.29)
LS Sequence Number: 0x80000003
LS Checksum: 0x008a
Length: 28
Netmask: 255.255.255.224
Metric: 14000
You'll note that one byte of the checksum is 0x00; quagga would calculate the
checksum as 0xff8a.
It can be argued that the sourcing implementation generates an incorrect
checksum; however, rfc905 indicates that, for 1's complement arithmetic, the
value 255 shall be regarded as 0, thus either values are valid.
EXPLANATION
The quagga ospfd and ospf6d implementations operate by copying the PDU's
existing checksum in a holding variable, calculating the checksum, and comparing
the resulting checksum to the original. As a note, this implementation has the
side effect of modifying the contents of the PDU.
Evaluation of both rfc905 and rfc1008 shows that checksum validation should
involve calculating the sum over the PDU and checking that both resulting C0 and
C1 values are zero. This behavior is enacted in the rfc1008 implementation by
calling encodecc with k = 0 (checksum offset); however, this functionality had
been omitted from the quagga implementation.
PATCH
This patch adds the ability to call the quagga's fletcher_checksum() with a
checksum offset value of 0xffff (aka FLETCHER_CHECKSUM_VALIDATE) which returns
the sum over the buffer (a value of 0 indicates a valid checksum). This is
similar to the mechanism in rfc1008 when called with k = 0. The patch also
introduces ospf_lsa_checksum_valid().
ospf6d had it's own implementation of the fletcher checksum in
ospf6_lsa_checksum(); it's the same algorithm as in fletcher_checksum(). This
patch removes the local implementation in favor of the library's as well as creates
and uses ospf6_lsa_checksum_valid().
quagga's ISIS implementation suffers from the same problem; however, I do not
have the facilities to validate a fix to ISIS, thus this change has been left to
the ISIS maintainers. The function iso_csum_verify() should be reduced to
running the fletcher checksum over the buffer using an offset of 0.
Signed-off-by: JR Rivers <jrrivers@cumulusnetworks.com>
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Reviewed-by: Nolan Leake <nolan@cumulusnetworks.com>
Reviewed-by: Ayan Banerjee <ayan@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/table.[ch]
- Add a function (route_table_get_next()) to get the route_node in
a tree that succeeds a given prefix in iteration order.
This allows one to reliably walk nodes in a tree while allowing
modifications, and is useful for achieving scale and
performance. Other approaches are also possible -- the main plus
point of this one is that it does not require any state about
the walk to be maintained in the table data structures.
- Add an iterator for walking the nodes in a tree. This introduces
a new structure (route_table_iter_t) and the following main
functions.
route_table_iter_init()
route_table_iter_pause()
route_table_iter_next()
route_table_iter_cleanup()
The iterator normally uses node pointers and the existing
route_next() function to walk nodes efficiently. When an
iteration is 'paused' with route_table_iter_pause(), it stores
the last prefix processed. The next call to
route_table_iter_next() transparently invokes
route_table_get_next() with the prefix to resume iteration.
* bgpd/bgp_table.[ch]
Add wrappers for the new table features described above.
* tests/table_test.c
Add tests for the new table code.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/table.[ch]
- Add a macro (ROUTE_NODE_FIELDS) that expands to all the fields
of a route_node structure.
- Add the route_table_delegate_t structure, a function vector
which allows clients to customize the behavior of one or more
tables.
The delegate currently contains the 'create_node' and
'destroy_node' functions, and hence enables a table to use an
alternative node structure. The alternative node is expected to
embed the fields of a route_node using ROUTE_NODE_FIELDS.
- Add route_table_init_with_delegate() to create a new table with
a given delegate.
- Make route_table_init() a thin wrapper around
route_table_init_with_delegate(). The delegate it passes in
simply creates/destroys route_node structures as before.
- Add a user data pointer (info) to the route_table
structure. This can be used by a client to keep per-table state.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/table.c
- Maintain table node count. Expose it via the route_table_count()
function (from revision cbdfbaa5).
- route_unlock_node(): Add assertion (from revision 228da428).
- route_table_free(): Make static and fix up cleanup code (from
revision 228da428).
- route_node_delete(): Change to be static.
- Add 'const' qualifier in a couple places.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This makes it possible to have both "show babel route A.B.C.D/M"
and "show babel route X:X::X:X/M" commands at the same time without
the parser complaining about ambiguity.
* lib/command.c: only accept STATE_DOT after : was seen.
Reported-by: Juliusz Chroboczek <jch@pps.jussieu.fr>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Most table handlers do not expect to be given an OID whose prefix is
outside what they can handle. This is not a problem with the SMUX
implementation since it always correct the OID such that the prefix
matches. However, this is not the case for the AgentX
implementation. A new function, smux_header_table() is used to do this
normalization.
|
|
smux_trap() signature has been changed to provide appropriate level
information to send SNMPv2 notifications. This includes the addition
of the enterprise OID to use (from which is derived the SNMP trap OID)
and the MIB registry to locate the appropriate function for variable
bindings provided by the trap.
The SMUX implementation has been updated but ignore the provided
enterprise OID. Instead, it still uses the SMUX peer OID to keep
compatibility with previous versions of Quagga. The SMUX
implementation also ignores the provided MIB registry since it uses
smux_get() function to grab the appropriate values. This is not
possible with the AgentX implementation since there is no such
function provided by NetSNMP.
|
|
This element was not unused.
|
|
smux_trap() contains an argument whose use appears to be to set
sysUpTime.0/timestamp field in SNMP trap. However, this value is not
used in smux_trap(). Moreover, it is expected that this field is the
value of sysUpTime.0 when the trap was sent and not any other time
related to the trap. To avoid any confusion, we remove this field from
the signature of the function.
|
|
--enable-snmp will enable AgentX support in Quagga. SMUX is still here
and can be enabled with --enable-snmp=smux. AgentX support can be
enabled with "agentx" in configuration file. As for SMUX, this command
is not understood by vtysh. It can be disabled with "no agentx",
though there is no real use of this since this command cannot be used
with vtysh.
If "agentx" and "no agentx" command were added to vtysh, it would not
be possible to disable agentx support after enabling it because
NetSNMP does not expose the appropriate methods for this.
The internals of AgentX are hidden by NetSNMP. Therefore, we don't
have a file descriptor to add to the threading system. We do not have
the timers to set either. Therefore, the event loop is modified to
make use of snmp_select_info() from NetSNMP.
Traps are not supported yet.
|
|
lib/snmp.c gets OID related helper functions that can be used with
another SNMP interface. smux.h is cleaned of SMUX specific bits to
only expose functions that may be used by an alternative
implementation. We also do not redefine functions already present in
NetSNMP. Just use the appropriate headers.
|
|
The correct method to link to NetSNMP is to use net-snmp-config (which
is like pkg-config). Explicit link to libcrypto is also dropped
(NetSNMP libs are linked to libcrypto, no need to link Quagga to
it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a
bug in configure.ac, it was properly populated.
|
|
NetSNMP is the only SNMP implementation for Quagga. We don't need two
different symbols.
|
|
Some .h files in lib/ are autogenerated. The search path should
include the build directory and the source directory. They usually
match but sometimes, they may be different. For example:
$ mkdir build
$ cd build
$ ../configure
$ make
|
|
* sockunion.h: Add back sockunion_str2su, its removal breaks things needlessly
(e.g. our own unit tests).
* sockunion.c: (sockunion_str2su) implement on top of str2sockunion.
|
|
This avoids memory heap fragmentation and imposses less load on the
system memory allocator.
* thread.h: FUNCNAME_LEN defined to 64 (ISO C99 says max 63)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[changed FUNCNAME_LEN to a less arbitrary value]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
thread_trim_head() already checks that the list is not empty.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* thread.c: It's only temporarily used in thread_call() to calculate the
diffs. Saves 80 bytes per copy.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Reduce indirection for values that doesn't change in the loop.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[adjusted after dropping previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
This function scores 2nd, profiling a full internet table load. It's called
for every prefix received.
Instead of looping in the interface lists comparing addresses use a hash
to mantain them.
* bgpd.c: Init the own address hash.
* bgp_nexthop.c: Introduce methods to maintain an own address hash.
(bgp_connected_add) add addresses to the hash.
(bgp_connected_delete) delete addresses from the hash.
(bgp_nexthop_self) lookup addresses in the hash. Removed the unused afi_t
parameter.
* bgp_route.c: (bgp_update_main) Micro-optimization, rearranged condition to
not lookup the hash for bogus nexthops (0.0.0.0 or a class D/E address)
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
ospfd was crashing some times on neighbour going down. The cause was that
ospf_nsm_event() was accessing already freed memory in ospf_nbr_delete()
call from ospf_nsm_event().
What happens is that since commit b5043aab (lib: fix incorrect thread
list...) now a thread can be on the event and ready lists but
thread_cancel_event() doesn't account for that.
* thread.c: (thread_cancel_event) loop on the ready list too to cancel
pending events.
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* command.c: (cmd_ipv6_match) Drop IPv6 address recognition
heuristics and solely rely on inet_pton, because strings
like "abcd" were mistaken for IPv6 addresses.
This affects e.g. the command "neighbour WORD peer-group",
which won't work with words consisting of up to 4 characters
between 'a' and 'f' and digits.
From: Roman Hoog Antink <rha@open.ch>
[full delete instead of #if 0]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/sockunion.c,
* zebra/zebra_rib.c: replace ->sin.sin_addr.s_addr with sockunion2ip
Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
[reworded commit message]
Signed-off-by: David Lamparter <equinox@diac24.net>
|
