summaryrefslogtreecommitdiff
path: root/ospf6d/ospf6_main.c
AgeCommit message (Collapse)Author
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-10-102004-10-10 Paul Jakma <paul@dishone.st>paul
* ospf6_route.c: Add const qualifier to various char arrays of constants. signed/unsigned fixes. (ospf6_linkstate_table_show) argv is const * ospf6_snmp.c: listnode typedef is dead. (ospf6_snmp_init) Take struct thread_master arg, needed for smux_init. * ospf6_snmp.h: update ospf6_snmp_init declaration. * ospf6d.c: (ospf6_init) add const qualifier to sargv, pass master to ospf_snmp6_init. * ospf6_asbr.c: const char update. * ospf6_interface.c: ditto, plus signed/unsigned fixes. (ipv6_ospf6_cost) Check whether cost fits in u_int32_t and use strtoul. * ospf6_intra.c: const char update. Parenthesise expression. * ospf6_lsa.c: signed/unsigned and const char updates. * ospf6_proto.c: ditto. * ospf6_message.c: ditto. * ospf6_lsdb.c: signed/unsigned update. * ospf6_main.c: const char update. * ospf6_neighbor.c: ditto. * ospf6_spf.c: ditto. * ospf6_top.c: ditto.
2004-08-28Port ospf6d to sigevent and rename signal handling functions in vtysh not tohasso
conflict the ones in lib/sigevent.c. Fixes compiling with --disable-shared.
2004-07-232004-07-23 Paul Jakma <paul@dishone.st>paul
* ospf6_main.c: Delete LOG_PERROR, not portable. * ospf6_network.c: (ospf6_set_pktinfo) use setsockopt_ipv6_pktinfo
2004-06-20Removing code which looked at current dir for config file before attemptinghasso
to read system one.
2004-05-18Update to latest (really :) ospf6d from Zebra repository and some tinyhasso
fixes.
2004-05-18Ospf6d merge from Zebra repository with added privs stuff and mergedhasso
zclient changes.
2004-03-162004-03-16 David Young <dyoung@pobox.com>gdt
* (many) reference <lib/version.h> rather than "version.h", because version.h is a generated file and not present in the source tree when using objdir builds. (committed by gdt) works fine with normal builds; didn't try objdir
2004-03-04Many warning fixes from PC Drew ([quagga-dev 940]) and removing using PAGERhasso
from vtysh ([quagga-dev 932]).
2003-08-142003-08-14 Paul Jakma <paul@dishone.st>paul
* zebra/main.c: Fixup ZEBRA_{GROUP,USER} defines -> QUAGGA_{USER,GROUP} * bgpd/bgp_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripd/rip_main.c: ditto * ripngd/ripng_main.c: ditto * zebra/main.c: ditto
2003-08-122003-08-12 Paul Jakma <paul@dishone.st>paul
2003-08-12 Paul Jakma <paul@dishone.st> * Makefile.am: redhat/zebra.* -> redhat/quagga.* * configure.ac: Bump autoconf prerequisite to 2.53. dist name zebra -> quagga. general Zebra -> Quagga where appropriate (ie not zebra daemon). User and group zebra->quagga. s/ZEBRA\(_VERSION\)/QUAGGA\1/. * bgpd/bgp_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/ * lib/command.c: Update banners and s/ZEBRA\(_VERSION\)/QUAGGA\1/ * lib/print_version.c: ditto * lib/version.h: s/ZEBRA\(_VERSION\)/QUAGGA\1/ and bump version. Change ZEBRA_URL. * lib/smux.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/ * lib/vty.h: Change Zebra.conf to Quagga.conf (integrated file) * ospf6d/ospf6{,_main}.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/ * ospfd/ospf_main.c: s/ZEBRA\(_VERSION\)/QUAGGA\1/
2003-08-102003-08-10 amir <amir@datacore.ch>paul
* Add missing 'i' to getopts, short form of --pid_file. see http://bugzilla.quagga.net/show_bug.cgi?id=25
2003-06-152003-06-15 Paul Jakma <paul@dishone.st>paul
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global, pass the thread master in explicitly to vty_init. Sort out some header dependency problems with lib/command.h * zebra/: Move globals to struct zebrad. Update vty_init(). * (.*)/\1_main.c: update call to vty_init().
2003-06-042003-06-04 Paul Jakma <paul@dishone.st>paul
* Merge of zebra privileges
2003-05-25ospf6d part of 6Wind patch.hasso
2003-01-22Matthew Grant <grantma@anathoth.gen.nz>paul
[zebra 17290] [PATCHES] - Fixes for problems in 0.93b portfix patch
2002-12-13Initial revisionpaul