| Age | Commit message (Collapse) | Author |
|---|
|
* ospf6_zebra.c: (ospf6_zebra_if_state_update) zebra_interface_state_read
may return NULL, if it can't find an interface, deal with it.
|
|
* ospf6_route.c ([no_]debug_ospf6_route) Include memory as a debug
option. This allows ospf6 route memory debugging to be enabled or
disabled interactively or from a config file.
|
|
* ospf6_route.c: (ospf6_route_best_next) Allows unlock route, even
when there's no next route. This is consistent with how
ospf6_route_next() behaves.
* ospf6_intra.c: (ospf6_intra_prefix_lsa_remove) Make sure the last
route considered is always unlocked. This is needed when the for
loop terminates because ospf6_route_is_prefix() returns zero.
|
|
A clean exit makes it easier to use memory debuggers.
* ospf6_asbr.c: (ospf6_asbr_terminate) Add a function to do route map
cleanup.
* ospf6_lsa.c: (ospf6_lsa_terminate) Add a function to cleanup the lsa
handler vector.
* ospf6_main.c: (ospf6_exit) Add an function that causes ospf6d to
gracefully exit.
* ospf6_message.c: (ospf6_message_terminate) Add a function that frees
the send and receive buffers.
* ospf6_top.c: (ospf6_delete) Enable the ospf6_delete() function.
Disable ospf6 before freeing everything.
|
|
* ospf6_area.c: (ospf6_area_delete) Get rid of unused code that refers
to a nonexistent function and structure member.
|
|
* ospf6_area.c: Call ospf6_spf_table_finish() before deleting the spf
table. This ensures that the associated ospf6_vertex structures
are also freed.
* ospf6_spf.c: Only allocate a priority queue when a spf calculation
is actually performed. Also defer calling ospf6_spf_table_finish().
|
|
* ospf6_spf.c: Don't replace a node with another node with a lower
number of hops, instead get them from the queue in the correct
order. (Actually, the replacement crashed the ospf6d daemon
rather than worked.)
|
|
startup-config
* ospf6_interface.c: When '[no] ipv6 ospf6 advertise prefix-list'
appears in the startup configuration for ospf6d, a crash occurs,
because ospf6d attempts to schedule LSAs when the 'oi->area'
structure has not yet been initialized.
Now, when the command above is issued (either in the startup
configuration or at runtime), ospf6d will only schedule LSAs if
the 'oi->area' structure has been initalized. A similar test is
already used when handling the commands 'ipv6 ospf6 priority'
and 'ipv6 ospf6 cost'.
|
|
* ospf6d/ospf6_interface.c
* loopind(): sayonara
* ospf6d/ospf6_top.c
* ospf6_delete(): comment out, it might be useful if real shutdown is
added
|
|
* lib/prefix.h
* prefix6_bit(): add IPv6 wrapper for prefix_bit()
* ospf6d/ospf6_lsdb.c
* ospf6_lsdb_type_router_head(): employ prefix6_bit()
* ospf6_lsdb_type_head(): idem
|
|
Make one version of check prefix bit, and put it inline
with proper prototype. This gets rid of some macro's and also some
assert() that can never happen on a non-broken compiler.
* bgpd/bgp_table.c
* CHECK_BIT(): sayonara
* check_bit(): sayonara
* SET_LINK(): sayonara
* set_link(): make use of prefix_bit() instead of check_bit()
* bgp_node_match(): idem
* bgp_node_lookup(): idem
* bgp_node_get(): idem
* lib/prefix.h
* prefix_bit(): new inline version of check_bit()
* lib/table.c
* CHECK_BIT(): sayonara
* check_bit(): sayonara
* SET_LINK(): sayonara
* set_link(): make use of prefix_bit() instead of check_bit()
* route_node_match(): idem
* route_node_lookup(): idem
* route_node_get(): idem
* ospf6d/ospf6_lsdb.c
* CHECK_BIT(): sayonara
* ospf6_lsdb_lookup_next(): make use of prefix_bit() instead of
CHECK_BIT()
* ospf6_lsdb_type_router_head(): idem
* ospf6_lsdb_type_head(): idem
* ospf6d/ospf6_route.c
* CHECK_BIT(): sayonara
* ospf6_route_match_head() make use of prefix_bit() instead of
* CHECK_BIT()
|
|
It seems that there is a bug in ospf6d in ospf6_lsa_compare(): If LSA A
has sequence number smaller than 0x80000000 and LSA B has sequence
number larger than 0x80000000, ospf6_lsa_compare() returns that B is
more recent than A, although RFC says that sequence numbers should be
compared as signed numbers (0x8000001 smallest and 0x7FFFFFFF largest).
In ospfd, the function ospf_lsa_more_recent() has it right.
The problem appears when Quagga is used together with OSPFv3 in
development version of BIRD daemon ( http://bird.network.cz/ ),
which creates LSAs with maximum sequence number (0x7FFFFFFF)
as a part of flushing/premature aging LSA from OSPF area.
Because both daemons has different idea of which LSA instance
is more recent, it would lead to LSA storm.
|
|
* ospf6_lsdb.c: (ospf6_new_ls_id) Unlock the current LSA when breaking
out of the ospf6_lsdb_*_head() / ospf6_lsdb_*_next() loop early. No
explicit unlocking is needed when all LSAs are looped through
because ospf6_lsdb_*_next() manages everything in that case.
|
|
* ospf6_lsa.c: (ospf6_lsa_age_current) arithmetical compares make no sense
in non-host order..
|
|
* */*main.c: (main) Current versions of Gcc warn if the return value for
daemon() is not checked. So add a simple test and exit on failure.
|
|
*/*: ifp->flags is 64 bit unsigned which can not be handled by %l on 32
bit architectures - requires %ll and the appropriate cast.
|
|
* ospf6_lsa.c: (ospf6_lsa_premature_aging) set age to MAX_AGE - don't
rely on 0 magically meaning same.
(ospf6_lsa_age_current) handle MAXAGE.
|
|
|
|
Don't need command twice.
|
|
ospf6d will crash if attempting to remove interface when no areas have been
defined Check if any areas have been defined. Should prevent use of empty
pointer.
|
|
ospf6d will crash if this command is executed on a non-border-router.
Included test to verify that any routes are defined, preventing empty
pointer from being used.
|
|
Suggestion: Makes no sense to me that the statement to remove ospf6
configuration is located in OSPF6D_NODE.
Moved to CONFIG_NODE next to matching define command.
|
|
ospf6d will crash if the same range is defined twice.
There was no check if the same range had previously been defined,
thereby causing a later assert to fail.
|
|
The cmd_nodes used to configure vty, can mostly be static so
(basic data hiding 101).
|
|
Simple conversion of XMALLOC/memset to XCALLOC
|
|
Compiled on 32-bit and 64-bit linux gcc 4.1.2 platforms.
No run-time testing on 32-bit and limited run-time testing on 64-bit.
|
|
--without-crypto
Autoconfig work by me, the rest was done by
"Kirill K. Smirnov" <lich@math.spbu.ru>
|
|
- Add more stuff, archive libraries, etc..
|
|
|
|
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* {ospf6d,ripngd}/*: Finish job of marking functions as static, or
exporting declarations for them, to quell warning noise with
Quagga's GCC default high-level of warning flags. Thus allowing
remaining, more useful warnings to be more easily seen.
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: add a configure flag and autoconf macro, which will
determine if your toolchain supports PIE.
* */Makefile.am: add corresponding CFLAGS and LDFLAGS into
appropriate places.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
|
|
2008-05-29 Martin Nagy <mnagy@redhat.com>
* */*main.c: Sanity check port numbers before using.
|
|
2008-01-30 Peter Szilagyi <sp615@hszk.bme.hu>
* lib/stream.h: Remove named 'new' parameter in prototype
for c++ header compatibility.
* ospfd/ospf_opaque.h: ditto
* ospfd/ospfd.h: Renamed struct export to _export for c++
header compatibility.
* ospf6d/ospf6_area.h: ditto
|
|
2007-10-22 Phil Spagnolo <phillip.a.spagnolo@boeing.com>
* ospf6_asbr.c: (ospf6_asbr_lsentry_remove) Remove shortcut
of LSDB search - it's based on assumption non-BEST routes
can't have ASBR routes, which appears to be wrong. Safest to
search.
|
|
2007-06-07 Pavol Rusnak <prusnak@suse.cz>
* ospf6_lsa.c: (no_debug_ospf6_lsa_hex_cmd) Fix bug: must use strcmp
to compare strings.
|
|
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* lib/smux.c: (smux_trap) Fix printf format to work with 64-bit size_t.
* ospf6d/ospf6_snmp.c: (ospfv3AreaEntry, ospfv3AreaLsdbEntry) Fix some
zlog_debug printf formats to work with 64-bit size_t.
|
|
2007-03-08 David Siebörger d.sieborger@ru.ac.za
* ospf6_neighbor.c: (ospf6_neighbor_show) Fix bug #322, ospf6d
wasn't updated to match thread times changing to relative
time.
|
|
2007-02-27 Pavol Rusnak <prusnak@suse.cz>
* ospf6_lsa.c: (ospf6_lsa_handler_name) Fix bug: must use strcmp
to compare strings.
|
|
(from pkgsrc)
|
|
syntax
2006-10-04 Oliver Hookins <ohookins@gmail.com>
* bgpd/bgp_main.c: Add configuration check option, with
'-C' rather than '-c' for consistency between daemons.
* isisd/isis_main.c: ditto
* ospf6d/ospf6_main.c: ditto
* ospfd/ospf_main.c: ditto
* ripngd/ripng_main.c: ditto
* vtysh/vtysh_main.c: ditto
* ripd/rip_main.c: Change the config check option to
'-C' and tidy up the code.
* zebra/main.c: ditto
2006-10-04 Stergiakis Alexandros <astergiakis@antcor.com>
* ripd/rip_main.c: This trivial patch introduces a new
command-line option '-c', which instructs zebra/ripd
to check its configuration file for validity, print
any error message, and then exit. This is useful when
the configuration file is edited by hand or otherwise,
and you simply want to validate it without any other
effect.
* zebra/main.c: ditto
|
|
2006-03-01 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
* ospf6_asbr.c: fix bug of needless forwarding address
* ospf6d.h: version 0.9.7r
|
|
2006-02-22 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
* valgrind check and memory fix
* route table identification string added
* ospf6d.h: version 0.9.7q
|
|
2005-10-20 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
* ospf6_neighbor.c: add the calling of ospf6_maxage_remove ()
when the neighbor went out of Exchange/Loading.
|
|
2005-10-06 Yasuhiro Ohara <yasu@sfc.wide.ad.jp>
* ospf6_asbr.c: fix bug of calculating AS-External routes
in other areas. Add debugging function for border-router
calculation.
* ospf6d.h: version 0.9.7p
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* configure.ac: Add the test for Solaris least-privileges. Set
defines for whether capabilities are supported and whether of
the linux or solaris variety.
Add missing-prototypes, missing-declarations, char-subscripts
and cast-qual warnings to default cflags, cause Hasso enjoys warnings,
and we really should clean the remaining ones up. (ie isisd..).
* (*/*main.c) Update the zebra_capabilities_t arrays in the various
daemons to match the changes made in lib/privs.h.
* zebra.h: Solaris capabilities requires priv.h to be included.
* privs.{c,h}: Add support for Solaris Least-Privileges.
privs.h: Reduce some of the abstract capabilities, which do
not have rough equivalents on both systems. Rename the net
related caps to _NET, as they should have been in first
place.
(zprivs_terminate) should take the zebra_privs_t as argument so
that it can update change pointer.
Add an additional privilege state, ZPRIVS_UNKNOWN.
* privs.c: (various capability functions) Add
Solaris privileges variants.
(zprivs_state) Use privs.c specific generic types to
represent various capability/privilege related types, so that
each can be typedef'd as appropriate on each platform.
(zprivs_null_state) static added, to hold the state the null
method should report (should be raised by default, and
LOWERED if zprivs_terminate has been called)
(zprivs_state_null) Report back the zprivs_null_state.
(cap_map) Make it able to map abstract capability to multiple
system capabilities.
(zcaps2sys) Map to abstract capabilities to multiple system
privileges/capabilities.
(zprivs_init) move capability related init to seperate
function, zprivs_caps_init.
(zprivs_terminate) ditto, moved to zprivs_caps_terminate.
Set the change_state callback to the NULL state, so the
user can continue to run and use the callbacks.
|
|
* ospf6_asbr.c: (ospf6_asbr_redistribute_add) Fix sense of testing
of route_map_apply return code, it can return many things other
than RMAP_MATCH which do not indicate DENY. Should test explicitly
for equality to RMAP_DENYMATCH instead.
[backport candidate]
|
|
support and area import and export lists support.
|
