summaryrefslogtreecommitdiff
path: root/ospf6d
AgeCommit message (Collapse)Author
2004-12-09add comment about warning of comparison between signed and unsignedgdt
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.h: Change level of debug messages to LOG_DEBUG.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-26Fix compile.hasso
2004-11-25Merge svn revisions 1208, 1222 and 1228 from Zebra cvs.hasso
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-11-202004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c needs to include "log.h" to pick up the declaration.
2004-11-052004-11-05 Phil Spagnolo <phillip.a.spagnolo@boeing.com>gdt
* ospf6_flood.c: When adding a thread to retransmit an lsa after rxmt_interval, the ospf6d used thread_add_event(). However, thread_add_event() executes immediately and ignores the delay parameter. This was causing unnecesary unicast LSU sends. Adding the thread has been changed to use thread_add_timer() which will expire after delay. After the fix results appear consistent with expectation.
2004-11-02- Add .arch-ids and .arch-inventory to cvsignore, to allow one to use archpaul
with CVS trees.
2004-10-13Make initializing smux connection configurable - "smux peer OID" commandhasso
initializes connection, and "no smux peer" command terminates it. Fixes bugzilla #47 and #112.
2004-10-11Better common router-id handling.hasso
2004-10-102004-10-10 Paul Jakma <paul@dishone.st>paul
* ospf6_route.c: Add const qualifier to various char arrays of constants. signed/unsigned fixes. (ospf6_linkstate_table_show) argv is const * ospf6_snmp.c: listnode typedef is dead. (ospf6_snmp_init) Take struct thread_master arg, needed for smux_init. * ospf6_snmp.h: update ospf6_snmp_init declaration. * ospf6d.c: (ospf6_init) add const qualifier to sargv, pass master to ospf_snmp6_init. * ospf6_asbr.c: const char update. * ospf6_interface.c: ditto, plus signed/unsigned fixes. (ipv6_ospf6_cost) Check whether cost fits in u_int32_t and use strtoul. * ospf6_intra.c: const char update. Parenthesise expression. * ospf6_lsa.c: signed/unsigned and const char updates. * ospf6_proto.c: ditto. * ospf6_message.c: ditto. * ospf6_lsdb.c: signed/unsigned update. * ospf6_main.c: const char update. * ospf6_neighbor.c: ditto. * ospf6_spf.c: ditto. * ospf6_top.c: ditto.
2004-10-102004-10-10 Paul Jakma <paul@dishone.st>paul
* Makefile.am: fix listing of ospf_snmp.c in noinst_HEADERS
2004-10-08Merge svn revisions 1065 and 1066 from Zebra CVS.hasso
2004-10-03Common router id.hasso
2004-09-29Merge svn revision 1048 from Zebra cvs. Also add missing sokopt.h includehasso
to ospf6_network.h.
2004-09-23Remove usage of evil list and listnode typedefs.hasso
2004-09-13Merge svn revisions 997 and 1000 from Zebra cvs repository.hasso
2004-09-10Add IS-IS info into array.hasso
2004-09-03Merge svn revision 981 from Zebra cvs.hasso
2004-09-02Merge svn revisions 978-979 from Zebra CVS.hasso
2004-09-01Merge svn revision 975 from Zebra repository.hasso
2004-08-28Port ospf6d to sigevent and rename signal handling functions in vtysh not tohasso
conflict the ones in lib/sigevent.c. Fixes compiling with --disable-shared.
2004-08-26Merge changelog entry from zebra cvs for my vtysh fix.hasso
2004-08-26Merge svn revision 954 from Zebra cvs.hasso
2004-08-26Make ospf6d configuration appear in vtysh as well. Report sent to Yasuhirohasso
Ohara.
2004-08-25SVN revisions 935-940 merge from Zebra CVS.hasso
2004-08-19Merge svn revisions 924 and 925 from Zebra CVS. Also remove uselesshasso
ospf6_lsdb prototype declaration from ospf6_lsa.h. Report sent to Yasuhiro Ohara as well.
2004-08-15SVN revisions 916-920 from Zebra. ABR support is almost done.hasso
2004-08-04SVN revision 907 from Zebra cvs repository.hasso
2004-07-23Use ifp->mtu6 in ospf6d and ripngd.hasso
2004-07-23(somewhat unrelated cleanups, but all are very minor)gdt
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com> * */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir -lfoo", to avoid linking against installed libraries from a previous version. * {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared library version number to be 0.0 * configure.ac: remove spurious , so extract.pl is chmod'd +x. * HACKING: explain shared library versioning rules
2004-07-232004-07-23 Paul Jakma <paul@dishone.st>paul
* ospf6_main.c: Delete LOG_PERROR, not portable. * ospf6_network.c: (ospf6_set_pktinfo) use setsockopt_ipv6_pktinfo
2004-07-09Merge svn revision 855 from Zebra repository.hasso
2004-07-09cvsignore *.libs in build dirspaul
2004-07-09Update cvsignore's for *.lo and *.la - libtool filespaul
2004-06-20Removing code which looked at current dir for config file before attemptinghasso
to read system one.
2004-06-06CVS ignore Linux NFS silly-delete .nfs* filespaul
2004-05-18Update to latest (really :) ospf6d from Zebra repository and some tinyhasso
fixes.
2004-05-18Forgot these.hasso
2004-05-18Ospf6d merge from Zebra repository with added privs stuff and mergedhasso
zclient changes.
2004-05-082004-05-08 Paul Jakma <paul@dishone.st>paul
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes (bgp_interface_address_delete) ditto. (bgp_zebra_announce) ditto. (bgp_zebra_withdraw) ditto. * isis_zebra.c: Sync with zclient changes. * zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe message format. * ospf6_zebra.c: Sync to zclient changes * ospf_zebra.c: Sync with lib/zclient changes * rip_zebra.c: sync with zclient changes. * rip_interface.c: ditto. * ripng_{interface,zebra}.c: sync with zclient changes 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com> * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route (zapi_ipv4_delete) ditto. (zapi_ipv4_route) add/delete a route by way of cmd arg. (zapi_ipv6_add) collapsed into zapi_ipv6_route. (zapi_ipv6_delete) ditto. (zapi_ipv6_route) add/delete a route by way of cmd arg. (zebra_interface_address_delete_read) collapsed into zebra_interface_address_read. (zebra_interface_address_delete_read) ditto. (zebra_interface_address_read) read address add/delete messages by way of type argument. Describe command message format. (zebra_interface_add_read) Unconditionally read new ifmtu6 field. Describe command message format. (zebra_interface_state_read) Unconditionally read new ifmtu6 field. (zclient_redistribute_set) Collapsed into zclient_redistribute (zclient_redistribute_unset) ditto (zclient_redistribute) set/unset redistribution. (zclient_redistribute_default_set) Collapsed into zclient_redistribute_default. (zclient_redistribute_default_unset) ditto. (zclient_redistribute_default) Redistribute default set/unset. * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add zclient_redistribute. Ditto for zclient_redistribute_default_{set/unset}.
2004-03-20Fixing ospf6d as well and move Changelog entry from ospfd to general one.hasso
2004-03-162004-03-16 David Young <dyoung@pobox.com>gdt
* (many) reference <lib/version.h> rather than "version.h", because version.h is a generated file and not present in the source tree when using objdir builds. (committed by gdt) works fine with normal builds; didn't try objdir
2004-03-04Many warning fixes from PC Drew ([quagga-dev 940]) and removing using PAGERhasso
from vtysh ([quagga-dev 932]).
2003-12-03Add support for --enable-exampledir to specify where to place examplegdt
files, defaulting to sysconfdir (matching previous behavior). This is needed to support (cleanly) NetBSD pkgsrc, which requires that example config files go in $(prefix)/share/examples/pkgname, rather than in $(prefix)/etc/pkgname.
2003-10-242003-10-24 Paul Jakma <paul@dishone.st>paul
* configure.ac: Check for fcntl() * {bgpd,ospf,ospf6d,ripd,ripngd}/Makefile.am: Install conf file via regular automake means, not magic install incantations, see bug #38. * lib/Makefile.am: install the headers, needed to link libzebra.a (and hence libospf.a, OSPF-API, etc.)
2003-10-132003-10-13 Jay Fenlason <fenlason@redhat.com>paul
* ospf6d/ospf6_route.c: Fix 2 compile warnings.
2003-08-142003-08-14 Paul Jakma <paul@dishone.st>paul
* zebra/main.c: Fixup ZEBRA_{GROUP,USER} defines -> QUAGGA_{USER,GROUP} * bgpd/bgp_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripd/rip_main.c: ditto * ripngd/ripng_main.c: ditto * zebra/main.c: ditto
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-09 06:20:01 +0000