summaryrefslogtreecommitdiff
path: root/ospfd/ChangeLog
AgeCommit message (Collapse)Author
2007-03-23[ospfd] Bug #330 regression: failure to calculate routes through networksPaul Jakma
2007-03-23 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: (ospf_nexthop_calculation) Fix silly regression causing ospfd to fail to calculate paths past networks not attached to root vertex, introduced with bug #330 fixes.
2007-03-23[ospfd] Instrument ospf_spf with more debug log messagesPaul Jakma
2007-03-23 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: (various) Add more debug statements.
2007-03-14[ospfd] Return SNMP standard neighbor state values, not quagga internal onesAndrew J. Schorr
2007-03-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_snmp.c: (ospf_snmp_neighbor_state) New function to map internal quagga neighbor states to SNMP standard values. (ospfNbrEntry) Call new ospf_snmp_neighbor_state function.
2007-03-14[ospfd] Fix two debug messages that used inet_ntoa more than onceAndrew J. Schorr
2007-03-14 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_zebra.c: (ospf_zebra_add, ospf_zebra_delete) Fix bug where inet_ntoa was used twice in the same debug message, which doesn't work because there's a single shared buffer for the returned string. The fix is to use inet_ntop.
2007-02-27[ospfd] Fix bug: should exit immediately on SIGTERM if OSPF not actually runningAndrew J. Schorr
2007-02-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospfd.c: (ospf_terminate) Exit immediately if ospf is not actually running (e.g. the config file was empty). Fixes bug where SIGTERM would not kill ospfd.
2007-02-26[ospfd] Fix regression in SPF introduced by bug#330 fixesPaul Jakma
2007-02-26 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: Fix regression introduced with bug #330 fix: The cost update added to ospf_spf_add_parent only handled PtP case, differing from same functionality in higher-level ospf_spf_next. Regression diagnosed by Anders Pedersen, mailnews+router-quagga-dev@news.cohaesio.com. (ospf_vertex_new) Initialise vertices to max-cost. (ospf_spf_init) Root vertex always creates with 0 cost. (ospf_spf_add_parent) Remove the buggy V->W cost calculating code, instead take the new distance as a parameter. (ospf_nexthop_calculation) Take distance as parameter, so it can be passed down to add_parent. (ospf_spf_next) Dont initialise candiate vertex distance, vertex_new does so already. Pass distance down to nexthop_calculation (see above).
2007-01-24[ospfd] Bug #330: SPF must consider that nexthop-calc may failPaul Jakma
2007-01-24 Paul Jakma <paul.jakma@sun.com> * ospf_spf.c: Bug #330: Nexthop calculation sometimes may fail, and it needs to indicate this result to SPF. (ospf_spf_add_parent) Flush of parent list needs to be done here, for simplicity. (ospf_nexthop_calculation) Caller needs to know whether nexthop calculation succeeded. Every return statement must correctly indicate such. (ospf_spf_next) Queueing/prioritisation of vertices in SPF must take into account whether nexthop_calculation succeeded, or SPF may fail to find best paths.
2006-12-12[PtP over ethernet] New peer flag allows much more addressing flexibilityAndrew J. Schorr
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating whether a peer address has been configured. Comment now shows the new interpretation of the destination addr: if ZEBRA_IFA_PEER is set, then it must contain the destination address, otherwise it may contain the broadcast address or be NULL. (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete macros that were specific to IPv4 and not fully general. (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag. (CONNECTED_PREFIX) New macro giving the prefix to insert into the RIB: if CONNECTED_PEER, then use the destination (peer) address, else use the address field. (CONNECTED_ID) New macro to come up with an identifying address for the struct connected. * if.c: (if_lookup_address, connected_lookup_address) Streamline logic with new CONNECTED_PREFIX macro. * prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros for better performance than the general prefix_copy function. * zclient.c: (zebra_interface_address_read) For non-null destination addresses, set prefixlen to equal the address prefixlen. This is needed to get the new CONNECTED_PREFIX macro to work properly. * connected.c: (connected_up_ipv4, connected_down_ipv4, connected_up_ipv6, connected_down_ipv6) Simplify logic using the new CONNECTED_PREFIX macro. (connected_add_ipv4) Set prefixlen in destination addresses (required by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead of testing for IFF_POINTOPOINT. Delete invalid warning message. Warn about cases where the ZEBRA_IFA_PEER is set but no destination address has been supplied (and turn off the flag). (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning. Set prefixlen in destination address so CONNECTED_PREFIX will work. * connected.h: (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. * interface.c: (connected_dump_vty) Use CONNECTED_PEER macro to decide whether the destination address is a peer or broadcast address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT). * if_ioctl.c: (if_getaddrs) Instead of setting a peer address only when the IFF_POINTOPOINT is set, we now accept a peer address whenever it is available and not the same as the local address. Otherwise (no peer address assigned), we check for a broadcast address (regardless of the IFF_BROADCAST flag). And must now pass a flags value of ZEBRA_IFA_PEER to connected_add_ipv4 when a peer address is assigned. The same new logic is used with the IPv6 code as well (and we pass the new flags argument to connected_add_ipv6). (if_get_addr) Do not bother to check IFF_POINTOPOINT: just issue the SIOCGIFDSTADDR ioctl and see if we get back a peer address not matching the local address (and set the ZEBRA_IFA_PEER in that case). If there's no peer address, try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set. * if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl without bothering to check the IFF_POINTOPOINT flag. And if no peer address was found, just try the SIOCGLIFBRDADDR ioctl without checking the IFF_BROADCAST flag. Call connected_add_ipv4 and connected_add_ipv6 with appropriate flags. * if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to connected_add_ipv6. * kernel_socket.c: (ifam_read) Must pass new flags argument to connected_add_ipv6. * rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2 to determine local and possible peer address (so there's no longer a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately. Pass new flags argument to connected_add_ipv6. (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast to determine whether the connected destination address is a broadcast address. * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) Simplify logic by using new CONNECTED_PREFIX macro. * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX macro. * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX macro, both options collapse into the same code. * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new CONNECTED_ID macro. (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX macro. * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro instead of testing the IFF_POINTOPOINT flag. * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro instead of testing with if_is_pointopoint. And add commented-out code to implement alternative (in my opinion) more elegant behavior that has no special-case treatment for PtP addresses. (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID macro to simplify logic. (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does not give a useful result if prefixlen is 32 (we require a peer address in such cases). * ripd.c: (rip_update_interface) Fix same bug as above.
2006-12-04[ospfd] Consider all connected addresses when creating ospf interfacesAndrew J. Schorr
2006-12-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospfd.c: (ospf_network_run) Remove an offending 'break' statement. Previously, after creating a single ospf_interface on a given network interface, the code would skip to the next interface without considering other connected addresses on the interface. After removing the 'break', we now consider all connected addresses.
2006-11-30[ospfd] Add debug messages for a few zebra messages that had been overlookedAndrew J. Schorr
2006-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_zebra.c: (ospf_router_id_update_zebra, ospf_interface_address_add, ospf_interface_address_delete) If (IS_DEBUG_OSPF (zebra, ZEBRA_INTERFACE)) is enabled, then add a debug message about what Zebra is telling us. (ospf_zebra_add_discard) Add a debug message matching the one already in ospf_zebra_delete_discard.
2006-11-28[ospfd] Fix bug in passive-interface default commands.Andrew J. Schorr
2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_vty.c: (ospf_passive_interface_default) Take additional 'newval' arg so we can update ospf->passive_interface_default inside this function. More importantly, we now call ospf_if_set_multicast on all ospf_interfaces. (ospf_passive_interface, no_ospf_passive_interface) Fix bug: for 'default' case, argv[0] is undefined, so we must test for (argc == 0) before using argv[0]. And since ospf_passive_interface_default now calls ospf_if_set_multicast as needed, we can just return after calling ospf_passive_interface_default.
2006-10-24[ospfd] Stop losing subsequent default-information originate 'always' infoAndrew J. Schorr
2006-10-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_zebra.c: (ospf_redistribute_default_set) Fix bug where a new value for ospf->default_originate was being ignored if a previous 'default-information originate' command had already been processed.
2006-10-22[ospfd] Add passive-interface default supportPaul Jakma
2006-10-22 Yar Tikhiy <yar@comp.chem.msu.su> * (general) Add support for passive-interface default (with minor edits by Paul Jakma). * ospf_interface.h: Add OSPF_IF_PASSIVE_STATUS macro, looking at configured value, or the global 'default' value, as required. * ospf_interface.c: (ospf_if_new_hook) Leave passive unconfigured per default, allowing global 'default' to take effect for unconfigured interfaces. * ospf_packet.c: (various) use OSPF_IF_PASSIVE_STATUS * ospf_vty.c: (ospf_passive_interface_default) new function, unset passive from all interfaces if default is enabled, as the per-iface settings become redundant. (ospf_passive_interface_update) new func, update passive setting taking global default into account. ({no,}ospf_passive_interface_addr_cmd) Add support for 'default' variant of command. (show_ip_ospf_interface_sub) Update to take global default into account when printing passive status. (ospf_config_write) ditto. * ospfd.c: (ospf_new) set global passive-interface default. * ospfd.h: (struct ospf) Add field for global passive-interface.
2006-09-25[ospfd] Improve some warning messages.Andrew J. Schorr
2006-09-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_packet_dup, ospf_make_md5_digest) Fix zlog_warn messages to eliminate compiler warnings. (ospf_hello) Improve warning messages to show why we are complaining.
2006-08-30[ospfd] Fix assertion in DB-exchange fix, hit by ogier-db-ex-opt commitPaul Jakma
2006-08-28 Andy Gay <andy@andynet.net> * ospf_packet.c: (ospf_make_db_desc) Assert added with More-bit fixes does not hold up with addition of Ogier DB-Exchange optimisation, which can empty the db-summary list in between sent DD packets. Remove assert, update More-bit always when in Exchange.
2006-08-27[ospfd] redistribute default no longer works after complete reconfig, fixPaul Jakma
2006-08-27 J.J. Krabbendam <jkrabbendam@aimsys.nl> * ospfd.c: (ospf_finish_final) default redistribute should be unset too, fixes bug where reconfiguring ospfd completely can no longer enable default redistribution.
2006-08-27[ospfd] Bug #134, ospfd should be more robust to backward time changePaul Jakma
2006-08-25 Paul Jakma <paul.jakma@sun.com> * (general) Bug #134. Be more robust to backward time changes, use the newly added libzebra time functions. In most cases: recent_time -> recent_relative_time() gettimeofday -> quagga_gettime (QUAGGA_CLK_MONOTONIC, ..) time -> quagga_time. (ospf_make_md5_digest) time() call deliberately not changed. (ospf_external_lsa_refresh) remove useless gettimeofday, LSA tv_orig time was already set in ospf_lsa_new, called via ospf_external_lsa_new.
2006-08-27[ospfd] draft-ogier-ospf-dbex-opt DB-exchange optimisationPaul Jakma
2006-08-03 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_make_db_desc) Implement draft-ogier-ospf-dbex-opt DB-exchange optimisation.
2006-08-27[ospfd] Raise ExchangeDone earlier, avoid often needless round of DD packetsPaul Jakma
2006-08-03 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_make_db_desc) Unset the DD More bit after constructing the packet, if appropriate. (ospf_db_desc_proc) Speed up Exchange, slave should raise ExchangeDone earlier, as RFC mandates, by forming its reply before deciding whether both sides are done, avoids a needless round of empty DD packet exchanges at the end of Exchange, hence speeding up ExchangeDone. (ospf_db_desc) use UNSET_FLAG macro.
2006-08-27[ospfd] trivial: consolidate LSDB delete code into single functionPaul Jakma
2006-08-04 Paul Jakma <paul.jakma@sun.com> * ospf_lsdb.c: (ospf_lsdb_delete_entry) new function, consolidate exact same functionality replicated in other functions. (ospf_lsdb_add) Strip out code by using ospf_lsdb_delete_entry. (ospf_lsdb_delete) ditto. (ospf_lsdb_delete_all) ditto.
2006-07-27[ospfd] Bug #288: do not change router ID unless forced by manual configurationAndrew J. Schorr
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospfd.c: (ospf_router_id_update) Fix and document the algorithm for selecting the router ID: if there is not a statically configured ID, then stick to the most recent value to avoid disruptive changes. This should fix bug #288.
2006-07-26[ospfd] Allow ospf_lsa_unlock to NULL out callers' LSA pointers upon freePaul Jakma
2006-07-26 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.{c,h}: (ospf_lsa_unlock) Change to take a double pointer to the LSA to be 'unlocked', so that, if the LSA is freed, the callers pointer to the LSA can be NULLed out, allowing any further use of that pointer to provoke a crash sooner rather than later. * ospf_*.c: (general) Adjust callers of ospf_lsa_unlock to match previous. Try annotate 'locking' somewhat to show which 'locks' are protecting what LSA reference, if not obvious. * ospf_opaque.c: (ospf_opaque_lsa_install) Trivial: remove useless goto, replace with return. * ospf_packet.c: (ospf_make_ls_ack) Trivial: merge two list loops, the dual-loop predated the delete-safe list-loop macro.
2006-07-25[ospfd] Additional NSM neighbour state change stats/informationPaul Jakma
2006-07-25 Paul Jakma <paul.jakma@sun.com> * ospf_neigbor.h: (struct ospf_neighbor) Add some additional neighbour state statistics fields, timestamps for progressive and regressive state changes, and pointer to event string for the latter state change. * ospf_nsm.c: (nsm_notice_state_change) Update new state changs history as required. * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print out above new per-neighbour state change stats.
2006-07-11[ospfd] record timestamp and event of last NSM state change for neighbourPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) Record state change timestamp and event in nbr struct. * ospf_neighbor.h: (struct ospf_neighbor) Add fields to record timestamp of last NSM change and event. * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print last state change timestamp and event, if available.
2006-07-11[ospfd] trivial: NSM AdjChange should print event, declutter core functionsPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_notice_state_changes) Move state change logging code to new func to declutter nsm_change_state and ospf_nsm_event. Log event with AdjChange, it's useful to know. (nsm_change_state) move adjchange and snmp logging to previous. (ospf_nsm_event) call nsm_notice_state_changes from here. Move the debug message to entry of function, so it gets out even if something goes wrong.
2006-07-11[ospfd] Remove nsm_reset_nbr and a bunch of useless NSM event/action functionsPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_change_state) call nsm_clear_adj for all adjacency losses, hence removing need for nsm_reset_nbr. (nsm_reset_nbr) kill it, clear_adj in previous does fine. (nsm_kill_nbr,nsm_start) remove nsm_reset_nbr call. (ospf_nsm_event) Allow NSM function to be NULL, this along with removal of nsm_reset_nbr, allows a bunch of now useless functiosn to be removed. Remove some useless variables. (nsm_ignore) now useless, remove. (nsm_bad_ls_req) ditto (nsm_seq_number_mismatch) " (nsm_oneway_received) " (nsm_inactivity_timer) " (nsm_ll_down) " (NSM) replace removed action functions with NULL.
2006-07-11[ospfd] Improve Hello NetworkMask mismatch warning to give more infoAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_hello) Improve NetworkMask mismatch warning message to include interface name and conflicting prefix lengths.
2006-07-10[ospfd] cleanup NSM neighbour delete through a new Deleted NSM statePaul Jakma
2006-07-07 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.h: Add a NSM_Deleted neighbour state, to act as dummy state indicating the neighbour is to be deleted. * ospf_nsm.c: (general) Use the NSM_Deleted state to delete neighbours, thus allowing code to be slightly more obvious in its flow. (nsm_timer_set) Add NSM_Deleted. Add another timer the code missed. (nsm_kill_nbr) No need for special case call to nsm_change_state anymore. Make the assert and error-handling for same case more readable (Andrew Schorr) Remove the call to ospf_nbr_delete, nsm_change_state can do this generally now via NSM_Deleted. (struct ... NSM) Add the dummy NSM_Deleted state, the 3 events that can lead to nsm_kill_nbr all now transition the NBR to NSM_Deleted and the general change_state function can be left to do the work. (ospf_nsm_event) Special casing of events and early-return can be removed now. On transition into Deleted, delete the nbr. * ospf_dump.c: (ospf_nsm_state_msg) Add Deleted.
2006-07-06[ospfd] early-return in nsm_event missed LLDown event, fixes use after freePaul Jakma
2006-07-06 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) LLDown event also results in nbr being deleted, requires early-return too. Likely explains some crash reports after interface events.
2006-07-04[ospfd] Apply some simplifications to ospf_nsm, from Andrew's suggestionsPaul Jakma
2006-07-04 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (general) Various small cleanups from Andrew's review of last set of patches. (nsm_timer_set) Loading, Full and default can share same code too. (nsm_should_adj) Can just be one big OR. (nsm_twoway_received) Collapse into return statement.
2006-07-04[ospfd] CID #13, dont try print out fields of LSA we know to be NULL.Paul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.c: (ospf_translated_nssa_refresh) CID #13.
2006-07-04[ospfd] Clear adjacency state for NSM changes down to TwoWay/ExStartPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_clear_adj) clear adjacency related state for a neighbour, needed for some state changes from > ExStart down to ExStart or less, which need not go through nsm_reset_nbr. (nsm_reset_nbr) move code to former. Should be static. (ospf_nsm_event) Remove long dead code. Use nsm_clear_adj for state changes that take down adjacencies to TwoWay/ExStart. (nsm_kill_nbr) Oops, action function shouldn't try return 1 for error.
2006-07-04[ospfd] trivial cleanup of nsm_timer_setPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_timer_set) ls_req timer should be OFF in early states. Compact several identical sections. Set inactivity timer to OFF for Down, for documentary purposes.
2006-07-04[ospfd] Ensure NSM state functions can redirect next_state accidentlyPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) Don't allow action functions to change next_state if the NSM tables do not indicate next_state is conditional, log warning if one tries - existing code appears fine though.
2006-07-04[ospfd] consolidate adjacency check logicPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_should_adj) New function, just consolidate the 10.4 adjacency check from nsm_twoway_received/nsm_adj_ok. (nsm_twoway_received/nsm_adj_ok) Use former.
2006-06-30[ospfd] Fix "show ip ospf neighbor A.B.C.D" to show all matchesAndrew J. Schorr
2006-06-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_vty.c: (show_ip_ospf_neighbor_id) Should show all instances of that neighbor (since it may appear on multiple interfaces) instead of bailing out after showing the first match.
2006-06-30[ospfd] Avoid getting NSM stuck in ExStart by using local view of DR/BDRAndrew J. Schorr
2006-06-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_nsm.c: (nsm_twoway_received) When deciding whether to change from state Init to ExStart, the test for whether the neighboring router is DR or BDR should be against the local router's notion of DR/BDR, not the neighbor's view.
2006-06-29[ospfd] Implement new ospf router subcommand "log-adjacency-changes [detail]"Andrew J. Schorr
2006-06-28 Erik Muller <erikm@internap.com> * ospfd.h: Define 2 new struct ospf config flags: OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL * ospf_nsm.c (nsm_change_state): Log adjacency changes if requested. * ospf_vty.c (ospf_log_adjacency_changes): New command function to implement ospf subcommand "log-adjacency-changes [detail]". (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes. (show_ip_ospf) Show whether adjacency changes are logged. (ospf_config_write) Add "log-adjacency-changes [detail]" to config. (ospf_vty_init) Add ospf_log_adjacency_changes and no_ospf_log_adjacency_changes. * ospfd.texi: Document new ospf router subcommand "log-adjacency-changes [detail]".
2006-06-27[ospfd] Replace redistribution strings with new route_types.h defines.Paul Jakma
2006-05-23 Paul Jakma <paul.jakma@sun.com> * ospf_vty.c: (general) Replace in-place route redistribution command and help strings with the new auto-generated defines from lib/route_types.h
2006-06-26[ospfd] NSSA translate-enabled ABR should declare itself as ASBRPaul Jakma
2006-06-26 Paul Jakma <paul.jakma@sun.com> * ospf_abr.c: (general) NSSA translate-candidate ABRs need to be ASBRs, or other routers may rightfully refuse to install translated type-5s LSAs. reported by dendroot@gmail.com. (ospf_abr_nssa_check_status) Detect change in translator state when ABR, and inc/dec redistribute count as when we leave/enter the disabled state - so that translate-enabled ABR properly sets ASBR bit on non-NSSA areas. Run the resulting function through indent to clean it up. * ospf_lsa.c: (router_lsa_flags) For purposes of ASBR bit, NSSA area is same as stub area.
2006-06-24[ospfd] Improve two info log messages in ospf_snmp.cAndrew J. Schorr
2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_snmp.c: (ospfTrapNbrStateChange, ospfTrapIfStateChange) Improve info log message to indicate why the trap is being sent.
2006-06-24[ospfd] When writing out config, show "debug ospf nsm status" properlyAndrew J. Schorr
2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_dump.c: (config_write_debug) Fix typo to show debug ospf nsm status properly (not ism status).
2006-06-18[ospfd] Fix ospf passive-interface subcommand to create interface if necessaryAndrew J. Schorr
2006-06-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_vty.c: ({no_,}ospf_passive_interface) Replace if_lookup_by_name with a call to if_get_by_name -- if the interface does not exist already, it should be created. And remove the obsolete warning message.
2006-06-15[ospfd] Fix multicast membership drop bugPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * Reported by Milan Koci * ospf_interface.h: (struct ospf_if_info) Add reference counts for multicast group memberships. Add various macros to help manipulate/check membership state. * ospf_interface.c: (ospf_if_set_multicast) Maintain the ospf_if_info reference counts, and only actually drop memberships if it hits 0, to avoid losing membership when OSPF is disabled on an interface with multiple active OSPF interfaces. * ospf_packet.c: (ospf_{hello,read}) Use the new macros to check/set multicast membership. * ospf_vty.c: (show_ip_ospf_interface_sub) ditto.
2006-06-15[ospfd] lsdb_delete/discard_from_db should be more robust to bad argsPaul Jakma
2006-05-31 Paul Jakma <paul.jakma@sun.com> * ospf_lsdb.c: (ospf_lsdb_delete) robustify against NULL arguments, print warning. * ospf_lsa.c: (ospf_discard_from_db) ditto. (ospf_maxage_lsa_remover) Check lsa->lsdb for validity, possible mitigation (but not solution) for bug #269.
2006-06-15[ospfd] suppres mostly uninteresting debug message unless debug is setPaul Jakma
2006-05-30 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_read) Debug message about packets received on unenabled interfaces should be conditional on debug being set.
2006-05-12[ospfd] Fix small error in CID #13 commitPaul Jakma
2006-05-13 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.c: (ospf_translated_nssa_refresh) fix the sanity check to match the assert, small error in CID #13 fix.
2006-05-12[ospfd] CID #13, debug for NULL type7 LSA should not print out data from itPaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.c: (ospf_translated_nssa_refresh) Add non-assert sanity check, in case DEBUG isn't defined. Debug message when no type7 exists should print the ID from the type5, not the type7, fixes CID #13.
2006-05-12[ospfd] CID #15, remove redundant NULL check in ism_change_statePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * ospf_ism.c: (ism_change_state) NULL check on oi->area is useless, it's always valid. Only possibility where it couldn't be is if there is a race between abr_task and cleaning up oi's, in which case a NULL check here isn't going to do anything. Fixes CID #15.
2006-05-12[ospfd] CID #14, NULL check ospf->backbone before use, ospf_update_router_routePaul Jakma
2006-05-12 Paul Jakma <paul.jakma@sun.com> * ospf_ia.c: (ospf_update_router_route) ospf->backbone could be NULL when passed to ospf_find_asbr_route_through_area, check for NULL first, CID #14.