| Age | Commit message (Collapse) | Author |
|---|
|
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
|
|
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
|
|
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
* if.h: Declare if_flag_dump.
[backport candidate]
|
|
* ospf_network.c: (ospf_sock_init) Save errno before calling
ospfd_privs.change.
|
|
* ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print
an error message and return.
(ospf_read) If the interface state is ISM_InterfaceDown, issue
a warning message and ignore the packet.
|
|
* ospf_packet.h: Remove commented out definition of
OSPF_MAX_PACKET; neither it or the uncommented one are used any more.
* ospf_packet.c (ospf_make_ls_upd): Leave room for authentication
when deciding if an update will fit.
(ospf_packet_authspace): Factor out calculation of size required
for authentication.
(ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET.
Don't confuse readers that there is a macro.
|
|
* ospf_network.c: Improve all setsockopt error messages to give detailed
information on the arguments.
|
|
* ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done"
messages from LOG_WARNING to LOG_INFO, since this seems to be
normal.
|
|
* ospf_packet.c: (ospf_read) Always look up the interface if
ospf_recv_packet returns NULL ifp, since some platforms such
as Solaris 8 appear to support ifindex retrieval but don't.
|
|
R. Leu (author of original idea).
|
|
say so - we can never be translator.
|
|
|
|
* ospf_interface.h: Declare new function ospf_default_iftype.
* ospf_interface.c: (ospf_default_iftype) New function to centralize
this logic in one place.
* ospf_zebra.c: (ospf_interface_add) Use new function
ospf_default_iftype.
* ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic
by using new function ospf_default_iftype.
|
|
* ospf_packet.c: (ospf_db_desc) Should be static, not global.
(ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning
messages to include identifying information (e.g. router id).
* ospf_nsm.c: (nsm_change_state) Improve info message to include
router id and state names.
|
|
ospf_apiserver * from listnode. Remove unused variables. Follows
suggestion from Jay Fenlason.
|
|
Remove unused variable.
Add comment: this is seriously broken, and needs fixing. It appears
likely to segfault if ever called. Comments please - should I make
the fix I suggest in the comment? -gdt
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message
from LOG_NOTICE to LOG_DEBUG.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
* ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning
message and in comment.
(ospf_db_desc) Warning message that a packet is being discarded
should give the router id of the packet source. Fix spelling
of packet in two warning messages.
(ospf_ls_req) Warning message that a link state request is being
discarded should give the router id of the neighbor that sent it.
|
|
* debug.[ch]: Remove unused files.
* Makefile.am: Remove references to debug.c and debug.h
* ospf_main.c: Remove #include "debug.h" (was not being used, and
lib/debug.h has now been deleted).
|
|
|
|
in lib/zebra.h, ensure that RFC3542-required CMSG_SPACE and CMSG_LEN
are defined. Warn if alignment assumptions are made, since they are
i386-centric.
in lib/sockopt.h, declare that sockopt sizes are without
CMSG_SPACE-required padding - just simple sizeof.
in ospfd/ospf_packet.c, simply use CMSG_SPACE
This should remove all instances of CMSG_ALIGN from the source code.
This is a nonstandard, though rational, construct; quagga should use
only those defines in RFC3542.
|
|
* ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock.
|
|
* ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to
ignore stub area summary default. Even so it seems a strange
check, add a comment to that effect.
|
|
* ospfd.c: (ospf_network_match_iface) revert to previous network
statement match behaviour.
|
|
* ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points
to it. Add convenience pointer to msg->msg_iov[1], and use this,
fixing the unfortunate borkenness introduced in moving of this code
to a function.
(ospf_write) remove iovp and fix up call to previous.
(ospf_ls_upd_packet_new) cast size to long int - unfortunately
glibc's size_t format modifier is not portable.
|
|
* ospf_packet.c: (ospf_ls_upd_packet_new) Format for size_t should
be ld.
* ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of
THREAD_ARG to store an integer, but it should at least use same
same type to retrieve the value. Assert value is sane.
|
|
* ospf_packet.c: (ospf_write_frags) Add debug output
(ospf_write) set type early, so we can pass it to
ospf_write_frags.
(ospf_ls_upd_packet_new) print size in debug output when too large
packet is encountered.
|
|
|
|
* ospfd/ospf_packet.c: setsockopt_pktinfo -> setsockopt_ifindex
* zebra/irdp_main.c: ditto
|
|
* ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex()
function.
* ospf_packet.c: (ospf_read) manually look up ifindex
if system could not have returned one, eg openbsd.
|
|
ripd might need some more testing though.
|
|
initializes connection, and "no smux peer" command terminates it. Fixes
bugzilla #47 and #112.
|
|
reducing various configure options.
|
|
|
|
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
* ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order
remove ntohs that should have dissappeared. Take struct ip
as argument, caller has to know there's an IP header at start of
stream anyway.
* ospf_dump.h: update declaration of ospf_ip_header_dump.
* ospf_packet.c: (ospf_write) correct call to
sockopt_iphdrincl_swab_htosys which was munging the header.
(ospf_recv_packet) ip_len is needed for old OpenBSD fixup.
(ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as
we have it.
|
|
|
|
* ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't
use of variable names 'node' and 'nextnode' to avoid possible
conflict with list macros. Move variable declaration inside for
loop after a statement to top of function.
|
|
* ospf_snmp.c: Missed list typedef update
* ospf_dump.c: Include sockopt.h for header swab functions.
|
|
* ospf_packet.c: replace ospf_swap_iph_to... with
sockopt_iphdrincl_swab_...
|
|
|
|
* ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER
Apply to offset too. Print ip_cksum, lets not worry about
possible 2.0.37 compile problems.
* ospf_packet.c: (ospf_swap_iph_to{n,h}) Use
HAVE_IP_HDRINCL_BSD_ORDER.
(ospf_recv_packet) ditto.
(ospf_write) Fixup iov argument to ospf_write_frags.
|
|
* ospf_packet.c: (ospf_write) (struct msghdr).msg_name is caddr_t
on most platforms.
(ospf_recv_packet) ditto. And msg_flags is not always there
memset struct then set fields we care about rather than
initialise all fields individually.
|
|
|
|
* ospf_apiserver.{c,h}: (ospf_apiserver_term) loops calling
ospf_apiserver_free, which deletes referenced nodes from
apiserver_list, fixed.
|
|
|
