| Age | Commit message (Collapse) | Author |
|---|
|
* ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out
the LSA as then free_opaque_info_per_id() can never unlock (and
free) the LSA. Reported by Gunnar Stigen.
|
|
* ospf_network.c: Replace PKTINFO/RECVIF with call to
setsockopt_pktinfo
* ospf_packet.c: Use getsockopt_pktinfo_ifindex and
SOPT_SIZE_CMSG_PKTINFO_IPV4.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for
problem reported by Peter Frost amongst others, where function
will spin indefinitely if update list contains LSAs greater than
MTU-headers or other condition leading to update list never being
cleared. Problem of what to do with these LSAs remains.
(ospf_make_ls_upd) add comment about large LSA problem,
indentation cleanup.
|
|
|
|
libzebra and libospfapiclient are now built shared, and linked shared
with the daemons. This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller. Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries. As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit.
|
|
|
|
* ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous.
ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format.
|
|
* ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if
index is out of range.
ospf_flood.c: endianness fix
ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum
in various places.
|
|
used in route-map used to filter redistributions.
* Move ospf_prefix_list_update() function from ospfd.c to ospf_zebra.c.
|
|
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes
(bgp_interface_address_delete) ditto.
(bgp_zebra_announce) ditto.
(bgp_zebra_withdraw) ditto.
* isis_zebra.c: Sync with zclient changes.
* zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe
message format.
* ospf6_zebra.c: Sync to zclient changes
* ospf_zebra.c: Sync with lib/zclient changes
* rip_zebra.c: sync with zclient changes.
* rip_interface.c: ditto.
* ripng_{interface,zebra}.c: sync with zclient changes
2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com>
* zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route
(zapi_ipv4_delete) ditto.
(zapi_ipv4_route) add/delete a route by way of cmd arg.
(zapi_ipv6_add) collapsed into zapi_ipv6_route.
(zapi_ipv6_delete) ditto.
(zapi_ipv6_route) add/delete a route by way of cmd arg.
(zebra_interface_address_delete_read) collapsed into
zebra_interface_address_read.
(zebra_interface_address_delete_read) ditto.
(zebra_interface_address_read) read address add/delete messages
by way of type argument. Describe command message format.
(zebra_interface_add_read) Unconditionally read new ifmtu6 field.
Describe command message format.
(zebra_interface_state_read) Unconditionally read new ifmtu6 field.
(zclient_redistribute_set) Collapsed into zclient_redistribute
(zclient_redistribute_unset) ditto
(zclient_redistribute) set/unset redistribution.
(zclient_redistribute_default_set) Collapsed into
zclient_redistribute_default.
(zclient_redistribute_default_unset) ditto.
(zclient_redistribute_default) Redistribute default set/unset.
* zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add
zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add
zclient_redistribute. Ditto for
zclient_redistribute_default_{set/unset}.
|
|
* ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is
defined. Warn at compile and runtime. Use
IPTOS_PREC_INTERNETCONTROL otherwise.
|
|
* ospf_interface.c: (ospf_vl_set_params) Catch changes of interface
address for either end of a virtual-link, and hence potential cost
changes.
|
|
* ospf_packet.c: (ospf_associate_packet_vl) cleanup, move
some of the checks up to ospf_read, return either a
virtual link oi, or NULL.
(ospf_read) Cleanup, make it responsible for checks. Remove
the nbr lookup - moved to ospf_neighbor. Adjust all nbr
lookups to use new wrappers exported by ospf_neighbor.
* ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup.
* ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface
neighbour table by router-id for virtual-link ospf_interfaces,
not by peer_addr (which breaks for asymmetric vlinks)
(ospf_nbr_lookup) add a wrapper for nbr lookups to deal with
above.
|
|
|
|
|
|
warnings and update documentation.
|
|
|
|
|
|
|
|
[quagga-dev 843]
|
|
* ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range
should be configured with the highest cost path within the range,
not lowest.
|
|
* ospf_zebra.c: (ospf_interface_delete) Do not delete the interface
params, nor the interface structure, if an interface delete
message is received from zebra.
* ospf_interface.c: (ospf_if_delete_hook) Delete the interface
params and interface, ie that which was previously removed in
(ospf_interface_delete) above.
|
|
more. I'm not sure if this read should be attempted at all, but I'm trying
to keep code safe AND stable.
|
|
|
|
* ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len
network byte order. (bugzilla #67).
|
|
while trying not to change semantics. Add ifdefed-out code to
avoid matching ppp interfaces whose destination address does not
also match the prefix under consideration, to help out people with
problems due to as-yet-unfixed bugs with p2p interfaces coming and
going.
|
|
* ospf_packet.c (ospf_ls_upd_send_queue_event): get next route
node in body of the loop to avoid chance that route node
is unlocked and deleted before the next iteration tries to
get next route node.
|
|
* ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific
match for interface lookup.
|
|
Subject: [zebra 19093] [PATCH] Two more fixes
Show NSSA LSA route info in "show ip ospf database" output
|
|
|
|
|
|
Subject: [zebra 19091] [PATCH] NSSA fixes try2
NSSA didn't work without problems even after my previous fixes. Seems
that I tracked down problems finally.
|
|
|
|
|
