| Age | Commit message (Collapse) | Author |
|---|
|
2006-06-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_vty.c: ({no_,}ospf_passive_interface) Replace if_lookup_by_name
with a call to if_get_by_name -- if the interface does not exist
already, it should be created. And remove the obsolete warning
message.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* Reported by Milan Koci
* ospf_interface.h: (struct ospf_if_info) Add reference counts
for multicast group memberships. Add various macros to help
manipulate/check membership state.
* ospf_interface.c: (ospf_if_set_multicast) Maintain the
ospf_if_info reference counts, and only actually drop
memberships if it hits 0, to avoid losing membership when
OSPF is disabled on an interface with multiple active OSPF
interfaces.
* ospf_packet.c: (ospf_{hello,read}) Use the new macros to
check/set
multicast membership.
* ospf_vty.c: (show_ip_ospf_interface_sub) ditto.
|
|
2006-05-31 Paul Jakma <paul.jakma@sun.com>
* ospf_lsdb.c: (ospf_lsdb_delete) robustify against NULL arguments,
print warning.
* ospf_lsa.c: (ospf_discard_from_db) ditto.
(ospf_maxage_lsa_remover) Check lsa->lsdb for validity, possible
mitigation (but not solution) for bug #269.
|
|
2006-05-30 Paul Jakma <paul.jakma@sun.com>
* ospf_packet.c: (ospf_read) Debug message about packets
received on unenabled interfaces should be conditional on
debug being set.
|
|
2006-05-13 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_translated_nssa_refresh) fix the sanity
check to match the assert, small error in CID #13 fix.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_translated_nssa_refresh) Add non-assert
sanity check, in case DEBUG isn't defined. Debug message
when no type7 exists should print the ID from the type5, not
the type7, fixes CID #13.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* ospf_ism.c: (ism_change_state) NULL check on oi->area is
useless, it's always valid. Only possibility where it
couldn't be is if there is a race between abr_task and
cleaning up oi's, in which case a NULL check here isn't going
to do anything. Fixes CID #15.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* ospf_ia.c: (ospf_update_router_route) ospf->backbone could be
NULL when passed to ospf_find_asbr_route_through_area,
check for NULL first, CID #14.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* ospf_asbr.c: (ospf_redistribute_withdraw) remove ospf_lookup
call by taking the struct ospf * as argument, which the
caller has, fixing CID #28.
* ospf_asbr.h: (ospf_redistribute_withdraw) update declaration
* ospf_zebra.c: (ospf_redistribute_unset) update call to
ospf_redistribute_withdraw to match.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* ospf_interface.c: (ospf_if_exists) Fix missing NULL return
check on ospf_lookup, CID #27.
|
|
2006-05-12 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_lsa_action) Get rid of the ospf_lookup
call, which is not checked for NULL return, by stripping out
functionality which is never used, hence fixing Coverity CID
#29.
(struct lsa_action) remove unused member.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_default_originate_timer) Let the thread
take (struct ospf *) as thread argument, rather than (struct
ospf *)->default_originate, thus avoiding having to call
ospf_lookup.
* ospf_zebra.c: (ospf_redistribute_default_set) change setup
of ospf_default_originate_timer thread to match.
* ospfd.c: (ospf_router_id_update) ditto.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_abr.c: (ospf_area_range_cost_set) Shouldn't create a new
range, should just lookup to see if one exists, the new range
is just leaked. Fixes CID #46.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_route.c: (ospf_route_delete_same_ext) Fix deref before
NULL check by moving into check-protected block, fix CID #49.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (no_ospf_area_filter_list) Check NULL result from
ospf_area_lookup_by_area_id, fixes Coverity CID #69
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (general) Audit ospf_lookup calls in commands,
ensure check for NULL result, make vty messages consistent.
(show_ip_ospf_interface) Missing NULL check on ospf_lookup
result, fixes Coverity CID #70.
|
|
2006-04-24 Paul Jakma <paul.jakma@sun.com>
* (general) More Virtual-link fixes, again with much help in
testing / debug from Juergen Kammer. Primarily in SPF.
* ospf_spf.h: Add guard. ospf_interface.h will include this
header.
* ospf_interface.h: Modify ospf_vl_lookup definition to take
struct ospf as argument, so as to allow for NULL area
argument.
(struct ospf_vl_data) Remove out_oi, instead add a struct
vertex_nexthop, to use as initial nexthop for backbone paths
through a vlink.
* ospf_interface.c: (ospf_vl_lookup) Modified to allow
NULL area to be passed to indicate "any" (first) area.
Add extra debug.
(ospf_vl_set_params) vl_oi -> nexthop. Add extra debug.
(ospf_vl_up_check) Fix debug, inet_ntoa returns a static
buffer..
* ospf_route.c: (ospf_intra_add_router) Vlinks dont go through
backbone, don't bother checking.
* ospf_spf.c: (static struct list vertex_list) Record vertices
that will need to be freed.
(cmp) Order network before router vertices, as required,
wasn't implemented.
(vertex_nexthop_free) Mild additional robustness check.
(vertex_parent_free) Take void argument, as this function
is passed as list deconstructor for vertex parent list.
(ospf_vertex_new) More debug. Set deconstructor for parent
list. Track allocated vertices on the vertex_list.
(ospf_vertex_free) Get rid of the tricky recursive cleanup of
vertices. Now frees only the given vertex.
(ospf_vertex_add_parent) Fix assert.
(ospf_nexthop_calculation) Fix calculation of nexthop for
VLink vertices, lookup the vl_data and use its previously
recorded nexthop information.
(ospf_spf_calculate) Vertices are freed simply by deleting
vertex_list nodes and letting ospf_vertex_free as deconstructor
work per-node.
(ospf_spf_calculate_timer) Trivial optimisation, leave
backbone SPF calculation till last to reduce SPF churn on
VLink updates.
* ospf_vty.c: (ospf_find_vl_data) update call to ospf_vl_lookup
(no_ospf_area_vlink_cmd) ditto.
(show_ip_ospf_interface_sub) For Vlinks, the peer address is
more interesting than the output interface.
|
|
2006-04-03 Paul Jakma <paul.jakma@sun.com>
* (general) Fix issues with handling of Vlinks and entries
in the nbrs route-table which were highlighted by the
nsm/nbr_self fixes from bug #234. Many thanks to Juergen
Kammer for his help and efforts in testing out debug patches to
pinpoint the issue.
* ospf_interface.c: (ospf_vl_new) Add nbr_self for Vlink.
* ospf_neighbor.c: (ospf_nbr_key) new static function, helper
to create key in nbrs table for a given nbr.
(ospf_nbr_delete) Use ospf_nbr_key. Add an assert() to
document an expected state.
(ospf_nbr_add_self) Ditto.
(ospf_nbr_lookup_by_addr) Add an assert.
* ospf_nsm.c: (nsm_kill_nbr) Can never kill the nbr_self
psuedo-neighbour.
|
|
2006-03-27 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_lsa_checksum) Add an explicit cast to avoid
the ambiguities of ANSI and C99 C with respect to type
conversion. Detailed problem report and test case with
example data supplied by Dmitry Ivanov <dimss@telecentrs.lv>.
|
|
2006-03-25 Paul Jakma <paul.jakma@sun.com>
* ospf_interface.c: (ospf_if_lookup_recv_if) Ignore loopbacks,
we can never ever receive packets on those. Should fix
case where CARP is run with address in same subnet as real
interface. Problem report and diagnosis thanks to:
Landon Fuller <landonf@opendarwin.org>.
However, ospf_read() still can't deal deterministically with
multiple interfaces in same subnet.
|
|
2006-03-23 Steve Lawson <steve.lawson@aheadcomusa.com>
* ospf_lsa.c: (ospf_lsa_install) Fix incorrect byte-order
conversion of OSPF_MAX_SEQUENCE_NUMBER
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
2006-01-18 Juergen Kammer <j.kammer@eurodata.de>
* ospf_lsa.c: (ospf_router_lsa_new) dont take reference to the
stream data until it is constructed, data reference is
volatile due to the potential resize in link_info_set
2006-01-18 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (link_info_set) Resize the stream if required and
possible. Return number of links added.
(lsa_link_*_set) use return value from previous.
* ospf_lsa.h: Add OSPF_ROUTER_LSA_LINK_SIZE define.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* ospf_packet.c: (ospf_verify_header) print out the types
involved if there's a mismatch.
* ospf_zebra.c: (ospf_zebra_add) Adjust to new zserv format.
|
|
2006-01-10 Len Sorensen <lennartsorensen@ruggedcom.com>
* (general) Bug #234, see also [quagga-dev 3902].
Fix problem with nbr_self not being properly reinitialised
when an interface comes up, after having been down.
Some re-arrangement done by Paul Jakma, any bugs introduced
on top of Len's suggested changes are his.
* ospf_neighbor.c: (ospf_nbr_add_self) centralise
initialisation of nbr_self parameters here.
* ospf_interface.c: (ospf_if_new) deleting initialisation of
parameters of nbr_self, just rely on call to
ospf_nbr_add_self.
(ospf_if_cleanup) ditto.
* ospfd.c: (ospf_network_run) ditto.
|
|
2006-01-10 Juris Kalnins <juris@mt.lv>
* ospf_packet.c: (ospf_make_md5_digest) fix odd, if not
undefined effect, assignment of an increment expression.
|
|
2006-01-10 Juris Kalnins <juris@mt.lv>
* ospf_zebra.c: (ospf_interface_address_delete) fix rare leak of
struct connected in an error case.
|
|
2006-01-10 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (config_write_ospf_distribute) trim down
redundant strings.
|
|
2006-01-10 Paul Jakma <paul.jakma@sun.com>
* ospfd.c: (ospf_network_run) checking to see if router-id
is set should be on ospf->router_id, not router_id_static.
This was causing ospfd to not start if router-id had not
been configured statically.
(ospf_if_update) ditto.
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* (general) s/graceful/deferred/ in all files, the former term
is confusing wrt OSPF Graceful-Restart.
* ospfd.c: (ospf_deferred_shutdown_check) dont return
a function which returns void. SOS complains about this.
(ospf_finish)
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* buffer.c: (struct buffer_data) change gcc zero array
declaration to C99 incomplete array.
* stream.h: (struct stream) same
* ospf_api.c: (struct opaque_lsa) same
|
|
* ospf_abr.c: (ospf_abr_announce_network_to_area) check
returned LSA of ospf_summary_lsa_refresh and print warning if
it failed.
(ospf_abr_announce_network_to_area) similar
(ospf_abr_announce_rtr_to_area) similar
* ospf_lsa.c: (ospf_router_lsa_new) check LSA returned is valid.
(ospf_router_lsa_originate) similar
(ospf_router_lsa_refresh, ospf_network_lsa_new) similar
(ospf_summary_lsa_new) Check ID is valid.
(ospf_summary_lsa_originate) ditto, and check returned LSA from
previous function is !NULL.
(ospf_summary_lsa_refresh) check ospf_summary_lsa_new return
is !NULL.
(ospf_summary_asbr_lsa_new) ID valid check.
(ospf_summary_asbr_lsa_originate) similar.
|
|
* ospfd.h: remove the OSPF_ROUTER_ID_UPDATE_DELAY define
(struct ospf) remove the router_id timer thread.
remove export of ospf_router_id_update_timer.
* ospfd.c: (ospf_router_id_update) call ospf_if_update to
poke interfaces into action after ID has been configured.
(ospf_router_id_update_timer) removed.
(ospf_finish_final) t_router_id_update timer is gone.
(ospf_network_run) router-id update timer gone.
call ospf_router_id_update directly if ID not configured.
In the per-iface loop, don't ospf_if_up interfaces if
ID is still not configured. The update function will call
ospf_if_update anyway.
(ospf_if_update) ID update timer is gone. Just return if no
ID is set.
* ospf_vty.c: (ospf_router_id) call ospf_router_id_update, no
timer needed.
* ospf_zebra.c: (ospf_router_id_update_zebra) call
ospf_router_id_update directly, not via timer.
|
|
2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_dump.h: Define OSPF_TIME_DUMP_SIZE as appropriate buffer size
for use with ospf_timer_dump and ospf_timeval_dump.
* ospf_vty.c: Change all buffer sizes used with ospf_timer_dump and
ospf_timeval_dump to have size OSPF_TIME_DUMP_SIZE.
(show_ip_ospf_interface_sub) Fix possible buffer overflow in
call to ospf_timer_dump.
|
|
2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_ism.h: (OSPF_ISM_TIMER_OFF) Improve macro syntax by enclosing
in 'do {...} while(0)'.
|
|
2005-11-14 Paul Jakma <paul.jakma@sun.com>
* ospfd.c: (ospf_new) stub-shutdown should just default to
unconfigured, too strange otherwise.
(ospf_finish_final) t_opaque_lsa_self TIMER_OFF should be
preprocessor conditional on HAVE_OPAQUE_LSA.
* ospfd.h: (struct ospf) remove the SHUTDOWN_DEFAULT define.
no longer used, plus it wasn't in range that the command
accepted.
* ospf_zebra.h: Depends on vty.h, include it.
|
|
|
|
* ospf_{dump,spf,vty}.c: Oops, use the internal tv_sub
function rather than unportable timersub.
|
|
* ospf_packet.c: Change level of some warnings to
informational.
|
|
* ospf_apiserver.c: (apiserver_sync_callback) stray semi-colon
* ospf_packet.c: include checksum.h, remove the in_cksum extern
* prototypes.
* ospf_te.h: Add braces, quell warning.
|
|
* (general) RFC3137 stub-router support
* ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define.
(struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for
options, to allow shutdown to distinguish between complete
shutdown and shutdown of a subset of ospf instances.
(struct ospf)
Add stub_router_{startup,shutdown_}time, configuration of startup
and shutdown time for stub-router.
Add t_graceful_shutdown struct thread, timer for graceful
shutdown, if needed.
(struct ospf_area) Add stub_router_state - run time state of
stub-router for an area. Add flags for ADMIN, IS and WAS
states.
Add t_stub_router, timer thread to resend router-lsa for an
area.
* ospf_lsa.c: (ospf_link_cost) new simple function to spit out
either the given lnks cost or infinite cost if stub-router is
in effect.
(lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use
previous function for transit-links.
(ospf_stub_router_timer) timer thread for end of startup stub
router. Change state as required for the area and setup
re-origination of router-lsa.
(ospf_stub_router_check) Check/do whether stub-router should be
enabled, and whether it requires timer to be setup.
(ospf_router_lsa_new) call previous function at top.
(ospf_router_lsa_originate) no external callers, made static.
* ospf_lsa.h: (ospf_router_lsa_originate) removed.
* ospf_main.c: (sigint) make static.
remove call to exit, as ospf_terminate now deals with
exiting.
* ospf_route.c: (ospf_terminate) removed, now in ospfd.c.
* ospf_vty.c: (show_ip_ospf_area) print out state of
stub-router, if active.
(show_ip_ospf) print out configuration of stub-router
support, and details of graceful-shutdown if the timer is
active.
((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new
commands to (de-)?configure stub-router support.
(config_write_stub_router) write out config of stub-router.
(ospf_config_write) call previous.
(ospf_vty_init) install the new stub-router commands.
* ospfd.c: various functions made static.
(ospf_new) Set defaults for stub-router. Graceful shutdown
is made to default on, just to be adventerous.
(ospf_graceful_shutdown_finish) new function, final part of
shutdown.
(ospf_graceful_shutdown_timer) timer thread wrapper for
graceful-shutdown.
(ospf_graceful_shutdown_check) check whether to setup timer
for shutdown or proceed directly to final shutdown.
(ospf_terminate) moved here from ospf_route.c, call
ospf_finish for each instance.
(ospf_finish) renamed to ospf_finish_final and made static.
(ospf_finish) new function, exported wrapper around
ospf_graceful_shutdown_check.
(ospf_finish_final) complete shutdown of an instance.
Add missing TIMER_OFF's of two timer threads.
(ospf_area_free) opaque self lsa timer should be turned off.
|
|
* ospf_apiserver.c: (ospf_apiserver_term) This function should
not have side-effects (eg segv) if no apiserver instances are
active, ie be robust.
|
|
* ospf_vty.c: (show_ip_ospf) fix display of SPF timer if it
has not yet been run.
|
|
* ospf_dump.c: (ospf_timeval_dump) fix ms adjustment, thanks to
Andrew Schorr.
* ospf_vty.c: (ospf_config_write) fix write out of spf timers
configuration.
|
|
* (general) SPF millisecond resolution timer with adaptive,
linear back-off holdtime. Prettification of ospf_timer_dump.
* ospf_dump.c: (ospf_timeval_dump) new function. The guts of
ospf_timer_dump, but made to be more dynamic in printing out
the relative timeval, sliding the precision printed out
according to the value.
(ospf_timer_dump) guts moved to ospf_timeval_dump.
* ospf_dump.h: export ospf_timeval_dump.
* ospf_flood.c: (ospf_flood) remove gettimeofday, use
the libzebra exported recent_time instead, as it's not
terribly critical to have time exactly right - the dropped
LSA will be retransmited to us if we don't ACK it.
* ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're
not transmitting, just putting LSA back on update transmit list.
* ospfd.h: delay and holdtimes should be unsigned.
Add spf_max_holdtime and spf_hold_multiplier.
Update default defines for delay and hold time to be in msec.
(struct ospf) change the SPF timestamp to a struct timeval.
Remove ospf_timers_spf_(un)?set.
* ospfd.c: (ospf_timers_spf_{set,unset}) removed.
(ospf_new) initialise spf_max_holdtime and spf_hold_multiplier
* ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval
now, update with gettimeofday.
(ospf_spf_calculate_schedule) Change SPF timers to millisecond
resolution.
Make the holdtime be adaptive, with a linear increase in
holdtime ever consecutive SPF run which occurs within holdtime
of previous SPF, bounded by spf_max_holdtime.
* ospf_vty.c: Update spf timers commands.
(ospf_timers_spf_set) trivial helper.
(ospf_timers_throttle_spf_cmd) new command to set SPF delay,
initial hold and max hold times with millisecond resolution.
(ospf_timers_spf_cmd) Deprecated. Accept the old values,
convert to msec, truncate to new limits.
(no_ospf_timers_throttle_spf_cmd) set timers to defaults.
(no_ospf_timers_spf_cmd) deprecated form, same as previous.
(show_ip_ospf_cmd) Display SPF parameters and times.
(show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne'
header.
(show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of
the multiple spaces which were making the lines even longer.
(show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header
(show_ip_ospf_neighbor_all_cmd) ditto and fix the field
widths for NBMA neighbours.
(show_ip_ospf_neighbor_int) Use header function.
(show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf,
local array - safer.
(show_ip_ospf_neighbor_detail_sub) ditto
(ospf_vty_init) install the new SPF throttle timer commands.
|
|
* (general) OSPF fast, sub-second hello and 1s dead-interval
support. A warning fix. Millisec support for ospf_timer_dump.
Change auto-cost ref-bandwidth to add a comment to write out
of config, rather than printing annoying messages to vty on
startup.
* ospf_dump.c: (ospf_timer_dump) Print out milliseconds too.
Callers typically specify a length of 9, so most see
millisecs unless they specify the additional length.
* ospf_interface.h: (struct ospf_interface) new interface param,
fast_hello.
* ospf_interface.c: (ospf_if_table_lookup) add brackets,
gcc warning fix.
(ospf_new_if_params) Initialise fast_hello param.
(ospf_free_if_params) Check whether fast_hello is configured.
(ospf_if_new_hook) set fast_hello to default.
* ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to
prevent funny side-effects from its if statement when this
macro is used conditionally by other macros.
(OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds.
(OSPF_HELLO_TIMER_ON) new macro to set hello timer according
to whether fast_hello is set.
* ospf_ism.c: Update all setting of the hello timer to use
either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The
former is used when hello is to be sent immediately.
* ospf_nsm.c: ditto
* ospf_packet.c: (ospf_hello) hello-interval is not checked
for mismatch if fast_hello is set.
(ospf_read) Annoying nit, fix "no ospf_interface" to be debug
rather than a warning, as it can be perfectly normal to
receive packets when logical subnets are used.
(ospf_make_hello) Set hello-interval to 0 if fast-hellos are
configured.
* ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying
nit, don't vty_out if this command is given, it gets tired
quick.
(show_ip_ospf_interface_sub) Print the hello-interval
according to whether fast-hello is set or not.
Print the extra 5 millisec characters from (ospf_timer_dump)
if fast-hello is configured.
(ospf_vty_dead_interval_set) new function, common to all
forms of dead-interval command, to set dead-interval and
fast-hello correctly. If a dead-interval is given, unset
fast-hello, else if a hello-multiplier is set, set
dead-interval to 1 and fast-hello to given multiplier.
(ip_ospf_dead_interval_addr_cmd) use
ospf_vty_dead_interval_set().
(ip_ospf_dead_interval_minimal_addr_cmd) ditto.
(no_ip_ospf_dead_interval) Unset fast-hello.
(no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval
should set it to OSPF_HELLO_INTERVAL_DEFAULT, not
OSPF_ROUTER_DEAD_INTERVAL_DEFAULT.
(config_write_interface) Write out fast-hello.
(ospf_config_write) Write a comment about
"auto-cost reference-bandwidth" having to be equal on all
routers. Hopefully just as noticeable as old practice of
writing to vty, but less annoying.
(ospf_vty_if_init) install the two new dead-interval
commands.
* ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL
and OSPF_FAST_HELLO_DEFAULT.
|
|
* (general) SPF memory management cleanup and fix for rare
double-free bug.
* ospf_spf.h: (struct vertex_parent) New struct to hold parent
specific data, eg the backlink and the parent vertex pointer,
and point to the appropriate general struct vertex_nexthop.
(struct vertex_nexthop) remove parent vertex pointer, so
this struct can be shared across vertices.
(struct vertex) rename list child to list children. Remove
list of nexthops, replace with list of vertex_parents.
* ospf_spf.c: (update_stat) trivial, remove cast from void *.
(vertex_nexthop_new) remove init of parent - field is gone
from struct vertex_nexthop.
(ospf_canonical_nexthops_free) Remove the canonical
vertex_nexthop memory objects. These are the vertex_nexthops
attached to the first level of router vertices from the root.
(vertex_parent_new) new function, create a vertex_parent.
(vertex_parent_free) ditto, but free it.
(ospf_vertex_new) Update to match changes to struct vertex.
(ospf_vertex_free) Recursively free a struct vertex and its
children. The parent list is used as a reference count.
vertex_nexthops must be free seperately, if required.
(ospf_vertex_dump) update to match struct vertex changes.
Print out backlink of parents too.
(ospf_vertex_add_parent) ditto.
(ospf_lsa_has_link) update comment.
(ospf_nexthop_add_unique) removed, not needed anymore.
(ospf_nexthop_merge) ditto.
(ospf_spf_consider_nexthop) renamed to ospf_spf_add_parent.
Simplified to just create vertex_parent and add it.
(ospf_spf_flush_parents) new function, flush out the parent
list.
(ospf_nexthop_calculation) Take the relevant route_lsa_link
as an argument, which simplifies things and removes the need
for the hack in ospf_nexthop_add_unique - ospf_spf_next
already knew exactly which link the cost calculated was for.
Update to match struct vertex changes too.
(ospf_spf_next) Don't create a vertex for W unnecessarily, if
it's there's a vertex already created for W, use it, and
hence there's no need to free it either.
Update some manipulation/comparisons of distance to match.
Flush the parent list if a lower cost path is found.
(ospf_spf_route_free) unused, removed.
(ospf_spf_dump) match the struct vertex changes, and dump the
ifname if possible.
(ospf_spf_calculate) At end of SPF, free the canonical nexthops
and call ospf_vertex_free on the root vertex to free the
entire tree.
* ospf_interface.c: (ospf_vl_set_params) match struct vertex
changes.
* ospf_route.c: (ospf_intra_route_add) ditto
(ospf_route_copy_nexthops_from_vertex) ditto
* memtypes.c: (memory_list_ospf) Add MTYPE_OSPF_VERTEX_PARENT.
|
|
* ospf_api.c: sign warnings.
* ospf_apiserver.c: sign warning and convert all the struct
in_addr initialisations so as not to make assumptions about
how this struct is organised, initialise the s_addr member
explicitely.
* ospf_packet.c: Add const qualifier to auth_key.
|
|
* ospf_snmp.c: Avoid mixing interface and ospf_interface objects
which now allows snmpwalk to work with ospfIfTable and
also with ospfIfMetricTable
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
