| Age | Commit message (Collapse) | Author |
|---|
|
* (general) OSPF fast, sub-second hello and 1s dead-interval
support. A warning fix. Millisec support for ospf_timer_dump.
Change auto-cost ref-bandwidth to add a comment to write out
of config, rather than printing annoying messages to vty on
startup.
* ospf_dump.c: (ospf_timer_dump) Print out milliseconds too.
Callers typically specify a length of 9, so most see
millisecs unless they specify the additional length.
* ospf_interface.h: (struct ospf_interface) new interface param,
fast_hello.
* ospf_interface.c: (ospf_if_table_lookup) add brackets,
gcc warning fix.
(ospf_new_if_params) Initialise fast_hello param.
(ospf_free_if_params) Check whether fast_hello is configured.
(ospf_if_new_hook) set fast_hello to default.
* ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to
prevent funny side-effects from its if statement when this
macro is used conditionally by other macros.
(OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds.
(OSPF_HELLO_TIMER_ON) new macro to set hello timer according
to whether fast_hello is set.
* ospf_ism.c: Update all setting of the hello timer to use
either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The
former is used when hello is to be sent immediately.
* ospf_nsm.c: ditto
* ospf_packet.c: (ospf_hello) hello-interval is not checked
for mismatch if fast_hello is set.
(ospf_read) Annoying nit, fix "no ospf_interface" to be debug
rather than a warning, as it can be perfectly normal to
receive packets when logical subnets are used.
(ospf_make_hello) Set hello-interval to 0 if fast-hellos are
configured.
* ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying
nit, don't vty_out if this command is given, it gets tired
quick.
(show_ip_ospf_interface_sub) Print the hello-interval
according to whether fast-hello is set or not.
Print the extra 5 millisec characters from (ospf_timer_dump)
if fast-hello is configured.
(ospf_vty_dead_interval_set) new function, common to all
forms of dead-interval command, to set dead-interval and
fast-hello correctly. If a dead-interval is given, unset
fast-hello, else if a hello-multiplier is set, set
dead-interval to 1 and fast-hello to given multiplier.
(ip_ospf_dead_interval_addr_cmd) use
ospf_vty_dead_interval_set().
(ip_ospf_dead_interval_minimal_addr_cmd) ditto.
(no_ip_ospf_dead_interval) Unset fast-hello.
(no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval
should set it to OSPF_HELLO_INTERVAL_DEFAULT, not
OSPF_ROUTER_DEAD_INTERVAL_DEFAULT.
(config_write_interface) Write out fast-hello.
(ospf_config_write) Write a comment about
"auto-cost reference-bandwidth" having to be equal on all
routers. Hopefully just as noticeable as old practice of
writing to vty, but less annoying.
(ospf_vty_if_init) install the two new dead-interval
commands.
* ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL
and OSPF_FAST_HELLO_DEFAULT.
|
|
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever
cost is changed ( [no] ip ospf area XXX default-cost YYY)
Support ignore-mtu option
* ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT
* ospfd/ospf_packet.c: support ignore-mtu option
* ospfd/ospf_interface.h: field added for skipping MTU check
* ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete()
Set mtu_ignore field to default value
* ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area()
* ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP
correct values
* ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next()
convert OSPFIFSTATE internal status into SNMP values
|
|
* (general) extern and static qualifiers added.
unspecified arguments in definitions fixed, typically they should
be 'void'.
function casts added for callbacks.
Guards added to headers which lacked them.
Proper headers included rather than relying on incomplete
definitions.
gcc noreturn function attribute where appropriate.
* ospf_opaque.c: remove the private definition of ospf_lsa's
ospf_lsa_refresh_delay.
* ospf_lsa.h: export ospf_lsa_refresh_delay
* ospf_packet.c: (ospf_make_md5_digest) make *auth_key const,
correct thing to do - removes need for the casts later.
* ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's
home-brewed versions, shuts up several warnings.
* ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and
VTY_GET_IPV4_PREFIX moved to lib/vty.h.
* ospf_zebra.c: (ospf_distribute_list_update_timer) hacky
overloading of the THREAD_ARG pointer should at least use
uintptr_t.
|
|
* ospf_interface.h: (ospf_if_lookup_by_name) Remove declaration of a
function that does not exist.
* ospf6_interface.[ch]: (ospf6_interface_lookup_by_name) Remove unused
function.
|
|
* rt_netlink.c: (netlink_link_change) If the status of an
operative interface changes (e.g. MTU changes), the client
daemons should be notified by calling zebra_interface_up_update.
Previously, the information was being updated in zebra's
interface structure, but the clients were not notified of
changes to an operative interface.
* ospf_zebra.c: (ospf_interface_state_up) If the MTU of an operative
interface changes, print a debug message and call ospf_if_reset()
to simulate down/up on the interface.
* ospf_interface.h: Declare new function ospf_if_reset().
* ospf_interface.c: (ospf_if_reset) New function to call ospf_if_down
and ospf_if_up for all ospf interfaces attached to an interface.
|
|
* ospf_interface.h: Reduce structure padding by putting new u_char
field multicast_memberships in a better spot (grouped with
other u_char fields type and state).
|
|
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
|
|
* ospf_interface.h: Declare new function ospf_default_iftype.
* ospf_interface.c: (ospf_default_iftype) New function to centralize
this logic in one place.
* ospf_zebra.c: (ospf_interface_add) Use new function
ospf_default_iftype.
* ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic
by using new function ospf_default_iftype.
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
* ospf_apiserver.{c,h}: lists typedef removal cleanup.
update some list loops to LIST_LOOP. some miscellaneous indent
fixups.
(ospf_apiserver_unregister_opaque_type) fix listnode_delete of
referenced node in loop.
* ospf_interface.h: lists typedef removal cleanup.
* ospf_opaque.{c,h}: lists typedef removal cleanup. update some list
loops to LIST_LOOP. miscellaneous style and indent fixups.
* ospf_te.{c,h}: ditto
* ospf_packet.c: lists typedef removal cleanup.
|
|
|
|
more. I'm not sure if this read should be attempted at all, but I'm trying
to keep code safe AND stable.
|
|
|
