summaryrefslogtreecommitdiff
path: root/ospfd/ospf_nsm.c
AgeCommit message (Collapse)Author
2006-07-11[ospfd] record timestamp and event of last NSM state change for neighbourPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) Record state change timestamp and event in nbr struct. * ospf_neighbor.h: (struct ospf_neighbor) Add fields to record timestamp of last NSM change and event. * ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print last state change timestamp and event, if available.
2006-07-11[ospfd] trivial: NSM AdjChange should print event, declutter core functionsPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_notice_state_changes) Move state change logging code to new func to declutter nsm_change_state and ospf_nsm_event. Log event with AdjChange, it's useful to know. (nsm_change_state) move adjchange and snmp logging to previous. (ospf_nsm_event) call nsm_notice_state_changes from here. Move the debug message to entry of function, so it gets out even if something goes wrong.
2006-07-11[ospfd] Remove nsm_reset_nbr and a bunch of useless NSM event/action functionsPaul Jakma
2006-07-10 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_change_state) call nsm_clear_adj for all adjacency losses, hence removing need for nsm_reset_nbr. (nsm_reset_nbr) kill it, clear_adj in previous does fine. (nsm_kill_nbr,nsm_start) remove nsm_reset_nbr call. (ospf_nsm_event) Allow NSM function to be NULL, this along with removal of nsm_reset_nbr, allows a bunch of now useless functiosn to be removed. Remove some useless variables. (nsm_ignore) now useless, remove. (nsm_bad_ls_req) ditto (nsm_seq_number_mismatch) " (nsm_oneway_received) " (nsm_inactivity_timer) " (nsm_ll_down) " (NSM) replace removed action functions with NULL.
2006-07-10[ospfd] cleanup NSM neighbour delete through a new Deleted NSM statePaul Jakma
2006-07-07 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.h: Add a NSM_Deleted neighbour state, to act as dummy state indicating the neighbour is to be deleted. * ospf_nsm.c: (general) Use the NSM_Deleted state to delete neighbours, thus allowing code to be slightly more obvious in its flow. (nsm_timer_set) Add NSM_Deleted. Add another timer the code missed. (nsm_kill_nbr) No need for special case call to nsm_change_state anymore. Make the assert and error-handling for same case more readable (Andrew Schorr) Remove the call to ospf_nbr_delete, nsm_change_state can do this generally now via NSM_Deleted. (struct ... NSM) Add the dummy NSM_Deleted state, the 3 events that can lead to nsm_kill_nbr all now transition the NBR to NSM_Deleted and the general change_state function can be left to do the work. (ospf_nsm_event) Special casing of events and early-return can be removed now. On transition into Deleted, delete the nbr. * ospf_dump.c: (ospf_nsm_state_msg) Add Deleted.
2006-07-06[ospfd] early-return in nsm_event missed LLDown event, fixes use after freePaul Jakma
2006-07-06 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) LLDown event also results in nbr being deleted, requires early-return too. Likely explains some crash reports after interface events.
2006-07-04[ospfd] Apply some simplifications to ospf_nsm, from Andrew's suggestionsPaul Jakma
2006-07-04 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (general) Various small cleanups from Andrew's review of last set of patches. (nsm_timer_set) Loading, Full and default can share same code too. (nsm_should_adj) Can just be one big OR. (nsm_twoway_received) Collapse into return statement.
2006-07-04[ospfd] Clear adjacency state for NSM changes down to TwoWay/ExStartPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_clear_adj) clear adjacency related state for a neighbour, needed for some state changes from > ExStart down to ExStart or less, which need not go through nsm_reset_nbr. (nsm_reset_nbr) move code to former. Should be static. (ospf_nsm_event) Remove long dead code. Use nsm_clear_adj for state changes that take down adjacencies to TwoWay/ExStart. (nsm_kill_nbr) Oops, action function shouldn't try return 1 for error.
2006-07-04[ospfd] trivial cleanup of nsm_timer_setPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_timer_set) ls_req timer should be OFF in early states. Compact several identical sections. Set inactivity timer to OFF for Down, for documentary purposes.
2006-07-04[ospfd] Ensure NSM state functions can redirect next_state accidentlyPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (ospf_nsm_event) Don't allow action functions to change next_state if the NSM tables do not indicate next_state is conditional, log warning if one tries - existing code appears fine though.
2006-07-04[ospfd] consolidate adjacency check logicPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * ospf_nsm.c: (nsm_should_adj) New function, just consolidate the 10.4 adjacency check from nsm_twoway_received/nsm_adj_ok. (nsm_twoway_received/nsm_adj_ok) Use former.
2006-06-30[ospfd] Avoid getting NSM stuck in ExStart by using local view of DR/BDRAndrew J. Schorr
2006-06-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_nsm.c: (nsm_twoway_received) When deciding whether to change from state Init to ExStart, the test for whether the neighboring router is DR or BDR should be against the local router's notion of DR/BDR, not the neighbor's view.
2006-06-29[ospfd] Implement new ospf router subcommand "log-adjacency-changes [detail]"Andrew J. Schorr
2006-06-28 Erik Muller <erikm@internap.com> * ospfd.h: Define 2 new struct ospf config flags: OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL * ospf_nsm.c (nsm_change_state): Log adjacency changes if requested. * ospf_vty.c (ospf_log_adjacency_changes): New command function to implement ospf subcommand "log-adjacency-changes [detail]". (no_ospf_log_adjacency_changes) Turn off log-adjacency-changes. (show_ip_ospf) Show whether adjacency changes are logged. (ospf_config_write) Add "log-adjacency-changes [detail]" to config. (ospf_vty_init) Add ospf_log_adjacency_changes and no_ospf_log_adjacency_changes. * ospfd.texi: Document new ospf router subcommand "log-adjacency-changes [detail]".
2006-04-03[ospfd] Fix virtual-link handling in nbrs route-table, exposed by bug#234 fixPaul Jakma
2006-04-03 Paul Jakma <paul.jakma@sun.com> * (general) Fix issues with handling of Vlinks and entries in the nbrs route-table which were highlighted by the nsm/nbr_self fixes from bug #234. Many thanks to Juergen Kammer for his help and efforts in testing out debug patches to pinpoint the issue. * ospf_interface.c: (ospf_vl_new) Add nbr_self for Vlink. * ospf_neighbor.c: (ospf_nbr_key) new static function, helper to create key in nbrs table for a given nbr. (ospf_nbr_delete) Use ospf_nbr_key. Add an assert() to document an expected state. (ospf_nbr_add_self) Ditto. (ospf_nbr_lookup_by_addr) Add an assert. * ospf_nsm.c: (nsm_kill_nbr) Can never kill the nbr_self psuedo-neighbour.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) OSPF fast, sub-second hello and 1s dead-interval support. A warning fix. Millisec support for ospf_timer_dump. Change auto-cost ref-bandwidth to add a comment to write out of config, rather than printing annoying messages to vty on startup. * ospf_dump.c: (ospf_timer_dump) Print out milliseconds too. Callers typically specify a length of 9, so most see millisecs unless they specify the additional length. * ospf_interface.h: (struct ospf_interface) new interface param, fast_hello. * ospf_interface.c: (ospf_if_table_lookup) add brackets, gcc warning fix. (ospf_new_if_params) Initialise fast_hello param. (ospf_free_if_params) Check whether fast_hello is configured. (ospf_if_new_hook) set fast_hello to default. * ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to prevent funny side-effects from its if statement when this macro is used conditionally by other macros. (OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds. (OSPF_HELLO_TIMER_ON) new macro to set hello timer according to whether fast_hello is set. * ospf_ism.c: Update all setting of the hello timer to use either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The former is used when hello is to be sent immediately. * ospf_nsm.c: ditto * ospf_packet.c: (ospf_hello) hello-interval is not checked for mismatch if fast_hello is set. (ospf_read) Annoying nit, fix "no ospf_interface" to be debug rather than a warning, as it can be perfectly normal to receive packets when logical subnets are used. (ospf_make_hello) Set hello-interval to 0 if fast-hellos are configured. * ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying nit, don't vty_out if this command is given, it gets tired quick. (show_ip_ospf_interface_sub) Print the hello-interval according to whether fast-hello is set or not. Print the extra 5 millisec characters from (ospf_timer_dump) if fast-hello is configured. (ospf_vty_dead_interval_set) new function, common to all forms of dead-interval command, to set dead-interval and fast-hello correctly. If a dead-interval is given, unset fast-hello, else if a hello-multiplier is set, set dead-interval to 1 and fast-hello to given multiplier. (ip_ospf_dead_interval_addr_cmd) use ospf_vty_dead_interval_set(). (ip_ospf_dead_interval_minimal_addr_cmd) ditto. (no_ip_ospf_dead_interval) Unset fast-hello. (no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval should set it to OSPF_HELLO_INTERVAL_DEFAULT, not OSPF_ROUTER_DEAD_INTERVAL_DEFAULT. (config_write_interface) Write out fast-hello. (ospf_config_write) Write a comment about "auto-cost reference-bandwidth" having to be equal on all routers. Hopefully just as noticeable as old practice of writing to vty, but less annoying. (ospf_vty_if_init) install the two new dead-interval commands. * ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL and OSPF_FAST_HELLO_DEFAULT.
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/smux.[ch]: allow to retreive global OID (identified by <0 namelen). * ospf_ism.c: generate SNMP traps on Interface state change * ospf_nsm.c: generate SNMP traps on Neighbour state change * ospf_snmp.[ch]: support for SNMP traps for interface and neighbours.
2005-06-20 * ospf_nsm.c: Make database exchange for NSSA database work.hasso
[backport candidate]
2005-05-062005-05-06 Paul Jakma <paul.jakma@sun.com>paul
* (general) extern and static qualifiers added. unspecified arguments in definitions fixed, typically they should be 'void'. function casts added for callbacks. Guards added to headers which lacked them. Proper headers included rather than relying on incomplete definitions. gcc noreturn function attribute where appropriate. * ospf_opaque.c: remove the private definition of ospf_lsa's ospf_lsa_refresh_delay. * ospf_lsa.h: export ospf_lsa_refresh_delay * ospf_packet.c: (ospf_make_md5_digest) make *auth_key const, correct thing to do - removes need for the casts later. * ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's home-brewed versions, shuts up several warnings. * ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX moved to lib/vty.h. * ospf_zebra.c: (ospf_distribute_list_update_timer) hacky overloading of the THREAD_ARG pointer should at least use uintptr_t.
2004-12-112004-12-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_db_desc) Should be static, not global. (ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning messages to include identifying information (e.g. router id). * ospf_nsm.c: (nsm_change_state) Improve info message to include router id and state names.
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-10-08Compiler warnings fixes round 1.hasso
2004-06-20Remove ifdef's HAVE_NSSA. NSSA support is stable enough.hasso
2003-03-252003-03-25 Paul Jakma <paul@dishone.st>paul
* sync to latest zebra CVS * spec file: updated and added define for ospf-api/client NB: OSPF-API has been broken by the zebra.org changes, which has added struct ospf * as a new arg to many functions
2003-01-18Date: Fri, 20 Dec 2002 17:28:45 +0900paul
From: Masahiko Endo <endo@suri.co.jp> Reply-To: zebra@zebra.org To: zebra@zebra.org Cc: kunihiro@zebra.org, yokota@kddlabs.co.jp Subject: [zebra 16823] [PATCH] Bugfix and new feature in Opaque-LSA handling. ----- * ----- * ----- * ----- * ----- * ----- * ----- * ----- * ----- * ----- Changes 2002.12.20 1. Bug fixes 1.1 When an opaque LSA is being removed from (or added to) the LSDB, it does not mean a change in network topology. Therefore, SPF recalculation should not be triggered in that case. There was an assertion failure problem "assert (rn && rn->info)" inside the function "ospf_ase_incremental_update()", because the upper function "ospf_lsa_maxage_walker_remover()" called it when a type-11 opaque LSA is removed due to MaxAge. 1.2 Type-9 LSA is defined to have "link-local" flooding scope. In the Database exchange procedure with a new neighbor, a type-9 LSA was added in the database summary of a DD message, even if the link is different from the one that have bound to. 2. Feature enhancements 2.1 Though a "wildcard" concept to handle type-9/10/11 LSAs altogether has introduced about a year ago, it was only a symbol definition and actual handling mechanism was not implemented. Now it works.
2003-01-17From endo@suri.co.jp Fri Jan 17 23:36:30 2003paul
Date: Fri, 20 Dec 2002 17:58:43 +0900 From: Masahiko Endo <endo@suri.co.jp> Reply-To: zebra@zebra.org To: zebra@zebra.org Cc: kunihiro@zebra.org Subject: [zebra 16824] [PATCH] nsm_kill_neighbor [ The following text is in the "ISO-2022-JP" character set. ] [ Your display is set for the "ISO-8859-1" character set. ] [ Some characters may be displayed incorrectly. ] Hi Ishiguro-san, Here is my problem analysis against the case that the ospfd crashes when an interface is brought down. When the ospfd receives a ZEBRA message "ZEBRA_INTERFACE_DOWN" from zebra daemon, the ospfd performs bunch of ospf-interface cleanup for the notified zebra-interface. There are cases that neighbor instance "nbr", which will be removed afterward, may scheduled in the NSM thread event queue. And when the NSM event thread is fired, dereference for this already freed "nbr" pointer causes SIGSEGV. Please take a look at following timeline of processing sequences.