summaryrefslogtreecommitdiff
path: root/ospfd/ospf_packet.c
AgeCommit message (Collapse)Author
2011-12-21ospfd: more info in LSA checksum warning (BZ#685)Jaroslav Fojtik
2011-09-29ospfd: fix regression in recent commitYAMAMOTO Shigeru
commit '717750433839762d23a5f8d88fe0b4d57c8d490a' causes SEGV error, when 'oi = ospf_if_lookup_recv_if (ospf, iph->ip_src, ifp);' returns NULL. * ospf_packet.c * ospf_read(): change a place of calling 'ospf_verify_header()'
2011-09-26ospfd: CVE-2011-3325 part 2 (OSPF pkt type segv)Denis Ovsienko
This vulnerability (CERT-FI #514838) was reported by CROSS project. The error is reproducible only when ospfd debugging is enabled: * debug ospf packet all * debug ospf zebra When incoming packet header type field is set to 0x0a, ospfd will crash. * ospf_packet.c * ospf_verify_header(): add type field check * ospf_read(): perform input checks early
2011-09-26ospfd: CVE-2011-3325 part 1 (OSPF header underrun)Denis Ovsienko
This vulnerability (CERT-FI #514838) was reported by CROSS project. When only 14 first bytes of a Hello packet is delivered, ospfd crashes. * ospf_packet.c * ospf_read(): add size check
2011-07-13Merge remote-tracking branch 'polymorf/master'Greg Troxel
2010-12-08ospfd: Prioritise hellos for sending by queueing to head of output bufferPaul Jakma
* It's possible for the packet output buffer to be filled up with a long series of non-Hello packets in between Hellos packets, such that the router's neighbours don't receive the Hello packet in time, even though the hello-timer ran at about the right time. Fix this by prioritising Hello packets, letting them skip the queue and go ahead of any packets already on the queue. This problem can occur when there are lots of LSAs and slow links. * ospf_packet.h: (ospf_hello_send_sub) not used outside of ospf_packet.c * ospf_packet.c: (ospf_fifo_push_head) add packet to head of fifo (so its no longer really a fifo, but hey) (ospf_packet_add_top) add packet to top of the packet output queue. (ospf_hello_send_sub) Put Hello's at the top of the packet output queue. make it take in_addr_t parameter, so that this ospf_hello_send can re-use this code too. (ospf_hello_send) consolidate code by using ospf_hello_send_sub (ospf_poll_send,ospf_hello_reply_timer) adjust for ospf_hello_send_sub.
2010-12-08ospfd: Reset neighbour inactivity timer for any packet arrivalPaul Jakma
* The hello protocol monitors connectivity in 2 different ways: a) local -> remote b) remote -> local Connectivity is required in both directions (2-way) for adjacencies to form. The first requires a round-trip to detect, and is done by advertising which other hosts a router knows about in its hello messages. This allows a host to detect which other routers are and are not receiving its message. If a remote neighbour delists the local router, then the local router raises a "1-Way Received" event. The latter is straight-forward, and is detected by setting a timer for the neighbour. If another Hello packet is not received within this time then the neighbour is dead, and a separate "Inactive" event is raised. These are 2 different and relatively independent measures. Knowing that we can optimise the 2nd, remote->local measure and reset the timer when /any/ packet arrives from that neighbour. For any packet is as good as a Hello packet. This can help in marginal situations, where the number of protocol messages that must be sent sometimes can exceed the capacity of the network to transmit the messages within the configured dead-time. I.e. an OSPF network with lots of LSAs, slow links and/or slow hosts (e.g. O(10k) LSAs, O(100kbit) links, embedded CPUs, and O(10s) dead-times). This optimisation allows an OSPF network to run closer to this margin, and/or allows networks to perhaps better cope with rare periods of exceptional load, where otherwise they would not. It's fully compatible with plain OSPF implementations and doesn't prejudice dead-neighbour detection. * ospf_nsm.h: Rename HelloReceived event to PacketReceived. * ospf_nsm.c: (nsm_hello_received) -> nsm_packet_received * ospf_packet.c: Schedule PacketReceived whenever a valid message is received.
2010-12-08ospfd: OSPF_MIN_LS_ARRIVAL compare should be >= to match ospf_floodPaul Jakma
* ospf_packet.c: (ospf_ls_upd) the corresponding test on the arrival side in (ospf_flood) is <, so this should be >=, not >, purely for consistency. There is no practical effect here though.
2010-05-11Fix ip_len byte order in DragonFly's raw socketDavid BÉRARD
2010-01-14ospfd: Fix debug messages that were masked by DISCARD_LSAPaul Jakma
* ospf_packet.c: (ospf_ls_upd) DISCARD_LSA continues, and so should be after debug messages, not before them.
2009-08-11ospfd: Make "Packet ... received on wrong link" conditional on debugPaul Jakma
* ospf_packet.c: make this message conditional on 'debug ospf event', as it be easily triggered with, e.g., multiple subnets sharing same physical network. E.g, see bug #532.
2009-07-28ospfd: Make ospf_if_lookup_recv_if() find the right unnumbered i/fJoakim Tjernlund
This function will return the interface for the first matching remote address for PtP i/f's. That won't work for multiple unnumbered i/f's as these may all have the same address. Pass in the struct interface pointer, ifp, to find the correct set of oi's to search in. This also reduces the size of the search list, making it faster. * ospfd/ospf_interface.c: Add struct interface * param to ospf_if_lookup_recv_if() to select the right list to search in. * ospfd/ospf_interface.h: ditto. * ospfd/ospf_packet.c: Pass new ifp argument to ospf_if_lookup_recv_if()
2009-06-24[ospfd] discount IP header size from a new LSA pktDmitry Tejblum
2008-09-24[ospfd] Move passive interface checkJoakim Tjernlund
* ospf_packet.c: Apply passive check and drop for all packages and not just Hellos. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-25Set destination for PtP links to OSPF_ALLSPFROUTERS.Joakim Tjernlund
Update ospf_db_desc_send(), ospf_ls_upd_queue_send() and ospf_ls_req_send() to always use OSPF_ALLSPFROUTERS for PtP links. See RFC 2328, chap 8.1 for details: "The IP destination address for the packet is selected as follows. On physical point-to-point networks, the IP destination is always set to the address AllSPFRouters." Without this, it won't be possible to establish adjacencies on multiple unnumbered links to the same router. ChangeLog: 2008-07-25 Joakim Tjernlund <Joakim.Tjernlund@transmode.se> * ospfd/ospf_packet.c: Set destination for PtP links to OSPF_ALLSPFROUTERS.
2007-08-21Bug #362 is fixed now.Denis Ovsienko
2007-05-10[autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma
2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2006-10-22[ospfd] Add passive-interface default supportPaul Jakma
2006-10-22 Yar Tikhiy <yar@comp.chem.msu.su> * (general) Add support for passive-interface default (with minor edits by Paul Jakma). * ospf_interface.h: Add OSPF_IF_PASSIVE_STATUS macro, looking at configured value, or the global 'default' value, as required. * ospf_interface.c: (ospf_if_new_hook) Leave passive unconfigured per default, allowing global 'default' to take effect for unconfigured interfaces. * ospf_packet.c: (various) use OSPF_IF_PASSIVE_STATUS * ospf_vty.c: (ospf_passive_interface_default) new function, unset passive from all interfaces if default is enabled, as the per-iface settings become redundant. (ospf_passive_interface_update) new func, update passive setting taking global default into account. ({no,}ospf_passive_interface_addr_cmd) Add support for 'default' variant of command. (show_ip_ospf_interface_sub) Update to take global default into account when printing passive status. (ospf_config_write) ditto. * ospfd.c: (ospf_new) set global passive-interface default. * ospfd.h: (struct ospf) Add field for global passive-interface.
2006-09-25[ospfd] Improve some warning messages.Andrew J. Schorr
2006-09-25 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_packet_dup, ospf_make_md5_digest) Fix zlog_warn messages to eliminate compiler warnings. (ospf_hello) Improve warning messages to show why we are complaining.
2006-08-30[ospfd] Fix assertion in DB-exchange fix, hit by ogier-db-ex-opt commitPaul Jakma
2006-08-28 Andy Gay <andy@andynet.net> * ospf_packet.c: (ospf_make_db_desc) Assert added with More-bit fixes does not hold up with addition of Ogier DB-Exchange optimisation, which can empty the db-summary list in between sent DD packets. Remove assert, update More-bit always when in Exchange.
2006-08-27[ospfd] Bug #134, ospfd should be more robust to backward time changePaul Jakma
2006-08-25 Paul Jakma <paul.jakma@sun.com> * (general) Bug #134. Be more robust to backward time changes, use the newly added libzebra time functions. In most cases: recent_time -> recent_relative_time() gettimeofday -> quagga_gettime (QUAGGA_CLK_MONOTONIC, ..) time -> quagga_time. (ospf_make_md5_digest) time() call deliberately not changed. (ospf_external_lsa_refresh) remove useless gettimeofday, LSA tv_orig time was already set in ospf_lsa_new, called via ospf_external_lsa_new.
2006-08-27[ospfd] draft-ogier-ospf-dbex-opt DB-exchange optimisationPaul Jakma
2006-08-03 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_make_db_desc) Implement draft-ogier-ospf-dbex-opt DB-exchange optimisation.
2006-08-27[ospfd] Raise ExchangeDone earlier, avoid often needless round of DD packetsPaul Jakma
2006-08-03 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_make_db_desc) Unset the DD More bit after constructing the packet, if appropriate. (ospf_db_desc_proc) Speed up Exchange, slave should raise ExchangeDone earlier, as RFC mandates, by forming its reply before deciding whether both sides are done, avoids a needless round of empty DD packet exchanges at the end of Exchange, hence speeding up ExchangeDone. (ospf_db_desc) use UNSET_FLAG macro.
2006-07-26[ospfd] Allow ospf_lsa_unlock to NULL out callers' LSA pointers upon freePaul Jakma
2006-07-26 Paul Jakma <paul.jakma@sun.com> * ospf_lsa.{c,h}: (ospf_lsa_unlock) Change to take a double pointer to the LSA to be 'unlocked', so that, if the LSA is freed, the callers pointer to the LSA can be NULLed out, allowing any further use of that pointer to provoke a crash sooner rather than later. * ospf_*.c: (general) Adjust callers of ospf_lsa_unlock to match previous. Try annotate 'locking' somewhat to show which 'locks' are protecting what LSA reference, if not obvious. * ospf_opaque.c: (ospf_opaque_lsa_install) Trivial: remove useless goto, replace with return. * ospf_packet.c: (ospf_make_ls_ack) Trivial: merge two list loops, the dual-loop predated the delete-safe list-loop macro.
2006-07-11[ospfd] Improve Hello NetworkMask mismatch warning to give more infoAndrew J. Schorr
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_hello) Improve NetworkMask mismatch warning message to include interface name and conflicting prefix lengths.
2006-06-15[ospfd] Fix multicast membership drop bugPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * Reported by Milan Koci * ospf_interface.h: (struct ospf_if_info) Add reference counts for multicast group memberships. Add various macros to help manipulate/check membership state. * ospf_interface.c: (ospf_if_set_multicast) Maintain the ospf_if_info reference counts, and only actually drop memberships if it hits 0, to avoid losing membership when OSPF is disabled on an interface with multiple active OSPF interfaces. * ospf_packet.c: (ospf_{hello,read}) Use the new macros to check/set multicast membership. * ospf_vty.c: (show_ip_ospf_interface_sub) ditto.
2006-06-15[ospfd] suppres mostly uninteresting debug message unless debug is setPaul Jakma
2006-05-30 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_read) Debug message about packets received on unenabled interfaces should be conditional on debug being set.
2006-01-17[ospfd/zserv] adjust to new formatpaul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * ospf_packet.c: (ospf_verify_header) print out the types involved if there's a mismatch. * ospf_zebra.c: (ospf_zebra_add) Adjust to new zserv format.
2006-01-10[ospfd] fix undefined effect expressionpaul
2006-01-10 Juris Kalnins <juris@mt.lv> * ospf_packet.c: (ospf_make_md5_digest) fix odd, if not undefined effect, assignment of an increment expression.
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: Change level of some warnings to informational.
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* ospf_apiserver.c: (apiserver_sync_callback) stray semi-colon * ospf_packet.c: include checksum.h, remove the in_cksum extern * prototypes. * ospf_te.h: Add braces, quell warning.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) SPF millisecond resolution timer with adaptive, linear back-off holdtime. Prettification of ospf_timer_dump. * ospf_dump.c: (ospf_timeval_dump) new function. The guts of ospf_timer_dump, but made to be more dynamic in printing out the relative timeval, sliding the precision printed out according to the value. (ospf_timer_dump) guts moved to ospf_timeval_dump. * ospf_dump.h: export ospf_timeval_dump. * ospf_flood.c: (ospf_flood) remove gettimeofday, use the libzebra exported recent_time instead, as it's not terribly critical to have time exactly right - the dropped LSA will be retransmited to us if we don't ACK it. * ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're not transmitting, just putting LSA back on update transmit list. * ospfd.h: delay and holdtimes should be unsigned. Add spf_max_holdtime and spf_hold_multiplier. Update default defines for delay and hold time to be in msec. (struct ospf) change the SPF timestamp to a struct timeval. Remove ospf_timers_spf_(un)?set. * ospfd.c: (ospf_timers_spf_{set,unset}) removed. (ospf_new) initialise spf_max_holdtime and spf_hold_multiplier * ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval now, update with gettimeofday. (ospf_spf_calculate_schedule) Change SPF timers to millisecond resolution. Make the holdtime be adaptive, with a linear increase in holdtime ever consecutive SPF run which occurs within holdtime of previous SPF, bounded by spf_max_holdtime. * ospf_vty.c: Update spf timers commands. (ospf_timers_spf_set) trivial helper. (ospf_timers_throttle_spf_cmd) new command to set SPF delay, initial hold and max hold times with millisecond resolution. (ospf_timers_spf_cmd) Deprecated. Accept the old values, convert to msec, truncate to new limits. (no_ospf_timers_throttle_spf_cmd) set timers to defaults. (no_ospf_timers_spf_cmd) deprecated form, same as previous. (show_ip_ospf_cmd) Display SPF parameters and times. (show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne' header. (show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of the multiple spaces which were making the lines even longer. (show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header (show_ip_ospf_neighbor_all_cmd) ditto and fix the field widths for NBMA neighbours. (show_ip_ospf_neighbor_int) Use header function. (show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf, local array - safer. (show_ip_ospf_neighbor_detail_sub) ditto (ospf_vty_init) install the new SPF throttle timer commands.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) OSPF fast, sub-second hello and 1s dead-interval support. A warning fix. Millisec support for ospf_timer_dump. Change auto-cost ref-bandwidth to add a comment to write out of config, rather than printing annoying messages to vty on startup. * ospf_dump.c: (ospf_timer_dump) Print out milliseconds too. Callers typically specify a length of 9, so most see millisecs unless they specify the additional length. * ospf_interface.h: (struct ospf_interface) new interface param, fast_hello. * ospf_interface.c: (ospf_if_table_lookup) add brackets, gcc warning fix. (ospf_new_if_params) Initialise fast_hello param. (ospf_free_if_params) Check whether fast_hello is configured. (ospf_if_new_hook) set fast_hello to default. * ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to prevent funny side-effects from its if statement when this macro is used conditionally by other macros. (OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds. (OSPF_HELLO_TIMER_ON) new macro to set hello timer according to whether fast_hello is set. * ospf_ism.c: Update all setting of the hello timer to use either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The former is used when hello is to be sent immediately. * ospf_nsm.c: ditto * ospf_packet.c: (ospf_hello) hello-interval is not checked for mismatch if fast_hello is set. (ospf_read) Annoying nit, fix "no ospf_interface" to be debug rather than a warning, as it can be perfectly normal to receive packets when logical subnets are used. (ospf_make_hello) Set hello-interval to 0 if fast-hellos are configured. * ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying nit, don't vty_out if this command is given, it gets tired quick. (show_ip_ospf_interface_sub) Print the hello-interval according to whether fast-hello is set or not. Print the extra 5 millisec characters from (ospf_timer_dump) if fast-hello is configured. (ospf_vty_dead_interval_set) new function, common to all forms of dead-interval command, to set dead-interval and fast-hello correctly. If a dead-interval is given, unset fast-hello, else if a hello-multiplier is set, set dead-interval to 1 and fast-hello to given multiplier. (ip_ospf_dead_interval_addr_cmd) use ospf_vty_dead_interval_set(). (ip_ospf_dead_interval_minimal_addr_cmd) ditto. (no_ip_ospf_dead_interval) Unset fast-hello. (no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval should set it to OSPF_HELLO_INTERVAL_DEFAULT, not OSPF_ROUTER_DEAD_INTERVAL_DEFAULT. (config_write_interface) Write out fast-hello. (ospf_config_write) Write a comment about "auto-cost reference-bandwidth" having to be equal on all routers. Hopefully just as noticeable as old practice of writing to vty, but less annoying. (ospf_vty_if_init) install the two new dead-interval commands. * ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL and OSPF_FAST_HELLO_DEFAULT.
2005-10-112005-10-11 Paul Jakma <paul.jakma@sun.com>paul
* ospf_api.c: sign warnings. * ospf_apiserver.c: sign warning and convert all the struct in_addr initialisations so as not to make assumptions about how this struct is organised, initialise the s_addr member explicitely. * ospf_packet.c: Add const qualifier to auth_key.
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever cost is changed ( [no] ip ospf area XXX default-cost YYY) Support ignore-mtu option * ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT * ospfd/ospf_packet.c: support ignore-mtu option * ospfd/ospf_interface.h: field added for skipping MTU check * ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete() Set mtu_ignore field to default value * ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area() * ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP correct values * ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next() convert OSPFIFSTATE internal status into SNMP values
2005-09-282005-09-28 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/md5-gnu.h: removed * lib/md5.h: replaces md5-gnu.h * lib/Makefile.am: use correct md5.h * lib/md5.c: import from WIDE * ospfd/ospf_packet.c: use new md5 API * ripd/ripd.c: use new md5 API
2005-05-112005-05-11 Paul Jakma <paul.jakma@sun.com>paul
* (general) Fix memory leaks in opaque AS-scope LSAs, reported and with much debugging done by by scott collins <scollins@agile.tv>. (possible backport candidate?) * ospf_lsa.c: (ospf_discard_from_db) dont call ospf_ase_unregister_external_lsa for opaque-lsa's, opaques are never registered with ase in the first place. * ospf_packet.c: (general) Disabuse opaque related code of its tendency to try gather up things into temporary lists. (ospf_ls_upd) remove the temporary lists opaque uses, call opaque functions inline, just like all other types. (ospf_ls_ack) ditto. (ospf_recv_packet) fixup sign warning. * ospf_opaque.c: (general) fix the unneeded use of lists, and untwist some of the logic. (ospf_opaque_self_originated_lsa_received) take a single LSA as argument, not a list of them. Remove the list loop. Logic otherwise unchanged. (ospf_opaque_ls_ack_received) Mostly ditto. But untwist the logic, move the actions up into the switch block, remove the goto's and sanitise the logic near the end a bit. * ospf_opaque.h: Adjust definitions of aforementioned functions in ospf_opaque.c to match.
2005-05-062005-05-06 Paul Jakma <paul.jakma@sun.com>paul
* (general) extern and static qualifiers added. unspecified arguments in definitions fixed, typically they should be 'void'. function casts added for callbacks. Guards added to headers which lacked them. Proper headers included rather than relying on incomplete definitions. gcc noreturn function attribute where appropriate. * ospf_opaque.c: remove the private definition of ospf_lsa's ospf_lsa_refresh_delay. * ospf_lsa.h: export ospf_lsa_refresh_delay * ospf_packet.c: (ospf_make_md5_digest) make *auth_key const, correct thing to do - removes need for the casts later. * ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's home-brewed versions, shuts up several warnings. * ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX moved to lib/vty.h. * ospf_zebra.c: (ospf_distribute_list_update_timer) hacky overloading of the THREAD_ARG pointer should at least use uintptr_t.
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-03-292005-03-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_write_frags) Enhance error message to show MTU. Also make function static. (ospf_write) Enhance error message to show interface name and MTU. Also make function static.
2005-02-232005-02-23 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospfd.h: Add new field struct stream *ibuf to struct ospf. * ospfd.c: (ospf_new) Check return code from ospf_sock_init. Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1). (ospf_finish) Call stream_free(ospf->ibuf. * ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then pass it to ospf_recv_packet for use in receiving the packet (instead of allocating a new stream for each packet received). Eliminate all calls to stream_free(ibuf). (ospf_recv_packet) The struct stream *ibuf is now passed in as an argument. No need to use recvfrom to peek at the packet header (to see how big it is), just use ospf->ibuf which is always large enough (this eliminates a system call to recvfrom). Therefore, no need to allocate a stream just for this packet, and no need to free it when done.
2005-02-192005-02-19 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: (ospf_stream_copy) remove (ospf_packet_dup) use stream_copy instead of ospf_stream_copy
2005-02-172005-02-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_recv_packet) If there is somehow a runt packet in the queue, it must be discarded. Improve warning messages. Fix scope to static. (ospf_read) Fix bug: should reset the read thread in all cases to make sure we continue to get incoming messages.
2005-02-152005-02-15 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: (ospf_recv_packet) Fix silly error wrt allocating ibuf. Thanks Andrew.
2005-02-142005-02-14 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: (ospf_recv_packet) use stream_recvmsg. 2005-02-11 Hasso Tepper <hasso at quagga.net> * ospf_lsdb.c: Fix sum of checksums calculation. 2005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the error message. 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.h: Reduce structure padding by putting new u_char field multicast_memberships in a better spot (grouped with other u_char fields type and state). 2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.h: Improve passive_interface comment. Add new multicast_memberships bitmask to struct ospf_interface to track active multicast subscriptions. Declare new function ospf_if_set_multicast. * ospf_interface.c: (ospf_if_set_multicast) New function to configure multicast memberships properly based on the current multicast_memberships status and the current values of the ospf_interface state, type, and passive_interface status. (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is now handled by ism_change_state's call to ospf_if_set_multicast). (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now handled by ism_change_state). * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave the DRouters multicast group (now handled by ism_change_state's call to ospf_if_set_multicast). (ism_change_state) Add call to ospf_if_set_multicast to change multicast memberships as necessary to reflect the new interface state. * ospf_packet.c: (ospf_hello) When a Hello packet is received on a passive interface: 1. Increase the severity of the error message from LOG_INFO to LOG_WARNING; 2. Add more information to the error message (packet destination address and interface address); and 3. If the packet was sent to ospf-all-routers, then try to fix the multicast group memberships. (ospf_read) When a packet is received on an interface whose state is ISM_Down, enhance the warning message to show the packet destination address, and try to update/fix the multicast group memberships if the packet was sent to a multicast address. When a packet is received for ospf-designated-routers, but the current interface state is not DR or BDR, then increase the severity level of the error message from LOG_INFO to LOG_WARNING, and try to fix the multicast group memberships. * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from active to passive. (no_ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from passive to active. (show_ip_ospf_interface_sub) Show multicast group memberships. 2005-02-08 Paul Jakma <paul@dishone.st> * ospf_packet.c: (various) Remove unneeded stream_set_putp abuse. 2005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down, not for event ISM_InterfaceDown. And improve the message by adding the interface flags. 2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_network.c: (ospf_sock_init) Save errno before calling ospfd_privs.change. 2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print an error message and return. (ospf_read) If the interface state is ISM_InterfaceDown, issue a warning message and ignore the packet. 2005-01-10 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_packet.h: Remove commented out definition of OSPF_MAX_PACKET; neither it or the uncommented one are used any more. * ospf_packet.c (ospf_make_ls_upd): Leave room for authentication when deciding if an update will fit. (ospf_packet_authspace): Factor out calculation of size required for authentication. (ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET. Don't confuse readers that there is a macro. 2004-12-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_network.c: Improve all setsockopt error messages to give detailed information on the arguments. 2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done" messages from LOG_WARNING to LOG_INFO, since this seems to be normal. 2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_read) Always look up the interface if ospf_recv_packet returns NULL ifp, since some platforms such as Solaris 8 appear to support ifindex retrieval but don't. 2004-12-22 Hasso Tepper <hasso at quagga.net> * ospf_dump.c: Show debug configuration in vtysh. * ospf_vty.c: Fix "show ip ospf" output. Router can't be elected in any case if it's configured as "translate-never". * ospf_lsdb.[ch]: New function to calculate sum of checksums. * ospf_vty.c: Bugfix to show really number of AS external LSAs, not number of all LSAs with AS scope, this includes opaque as LSAs as well, show this number separately. Show numbers and sums of checksums for each type of LSAs. * ospf_lsa.c: Calculate checksum before putting LSA into database. 2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_interface.h: Declare new function ospf_default_iftype. * ospf_interface.c: (ospf_default_iftype) New function to centralize this logic in one place. * ospf_zebra.c: (ospf_interface_add) Use new function ospf_default_iftype. * ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic by using new function ospf_default_iftype. 2004-12-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc) Should be static, not global. (ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning messages to include identifying information (e.g. router id). * ospf_nsm.c: (nsm_change_state) Improve info message to include router id and state names. 2004-12-09 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_apiserver.c (ospf_apiserver_term): Obtain struct ospf_apiserver * from listnode. Remove unused variables. Follows suggestion from Jay Fenlason. 2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * *.c: Change level of debug messages to LOG_DEBUG. 2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_main.c: (main) The 2nd argument to openzlog has been removed. 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message from LOG_NOTICE to LOG_DEBUG. 2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. 2004-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning message and in comment. (ospf_db_desc) Warning message that a packet is being discarded should give the router id of the packet source. Fix spelling of packet in two warning messages. (ospf_ls_req) Warning message that a link state request is being discarded should give the router id of the neighbor that sent it. 2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_main.c: Remove #include "debug.h" (was not being used, and lib/debug.h has now been deleted). 2004-11-25 Hasso Tepper <hasso at quagga.net> * ospf_main.c: Make group to run as configurable. 2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_packet.c (ospf_recv_packet): Assume CMSG_SPACE is present and works (lib/zebra.h provides if OS doesn't). 2004-11-15 Paul Jakma <paul@dishone.st> * ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock. 2004-11-12 Paul Jakma <paul@dishone.st> * ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to ignore stub area summary default. Even so it seems a strange check, add a comment to that effect. 2004-11-04 Paul Jakma <paul@dishone.st> * ospfd.c: (ospf_network_match_iface) revert to previous network statement match behaviour. 2004-11-02 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points to it. Add convenience pointer to msg->msg_iov[1], and use this, fixing the unfortunate borkenness introduced in moving of this code to a function. (ospf_write) remove iovp and fix up call to previous. (ospf_ls_upd_packet_new) cast size to long int - unfortunately glibc's size_t format modifier is not portable. 2004-10-31 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_write_frags) Add debug output (ospf_write) set type early, so we can pass it to ospf_write_frags. (ospf_ls_upd_packet_new) print size in debug output when too large packet is encountered. * ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of THREAD_ARG to store an integer, but it should at least use same same type to retrieve the value. Assert value is sane. 2004-10-22 Paul Jakma <paul@dishone.st> * ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex() function. * ospf_packet.c: (ospf_read) manually look up ifindex if system could not have returned one, eg openbsd, thanks to Rivo Nurges for highlighting problem and fix. Change setsockopt_pktinfo to setsockopt_ifindex. 2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com> * ospf_snmp.c: (ospf_snmp_if_update) Fix logic to handle PtP links with dedicated subnets properly. * ospf_lsa.c: (lsa_link_ptop_set) ditto. * ospfd.c: (ospf_network_match_iface) ditto. (ospf_network_run) ditto. * ospf_interface.c: (ospf_if_is_configured) ditto. (ospf_if_lookup_by_prefix) ditto. (ospf_if_lookup_recv_if) ditto. * ospf_vty.c: (show_ip_ospf_interface_sub) Display the peer or broadcast address if present. 2004-10-13 Hasso Tepper <hasso at quagga.net> * ospf_main.c: Unbreak compilation with ospfapi disabled. * ospf_snmp.c: Remove defaults used to initialize smux connection to snmpd. Connection is initialized only if smux peer is configured. 2004-10-12 Hasso Tepper <hasso at quagga.net> * ospf_main.c, ospf_opaque.c: Unbreak ospfclient compilation - move static variable from ospf_main.c into ospf_opaque.c. 2004-10-11 Hasso Tepper <hasso at quagga.net> * ospf_main.c, ospf_opaque.c: Disable ospfapi init by default. New command line switch to enable it. 2004-10-11 Paul Jakma <paul@dishone.st> * ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order remove ntohs that should have dissappeared. Take struct ip as argument, caller has to know there's an IP header at start of stream anyway. * ospf_dump.h: update declaration of ospf_ip_header_dump. * ospf_packet.c: (ospf_write) correct call to sockopt_iphdrincl_swab_htosys which was munging the header. (ospf_recv_packet) ip_len is needed for old OpenBSD fixup. (ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as we have it. * (global) Const char update and signed/unsigned fixes. * (various headers) size defines should be unsigned. * ospf_interface.h: remove duplicated defines, include the authoritative header - though, these defines should probably be moved to a dedicated header, or ospfd.h. * ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned. * ospf_packet.c: (ospf_write) cast result of shift to unsigned. 2004-10-08 Hasso Tepper <hasso at quagga.net> * *.[c|h]: Fix compiler warnings: make some strings const, signed -> unsigned, remove unused variables etc. 2004-10-07 Greg Troxel <gdt@claude.ir.bbn.com> * ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't use of variable names 'node' and 'nextnode' to avoid possible conflict with list macros. Move variable declaration inside for loop after a statement to top of function. 2004-10-07 Paul Jakma <paul@dishone.st> * ospf_snmp.c: Missed list typedef update * ospf_dump.c: Include sockopt.h for header swab functions. 2004-10-05 Paul Jakma <paul@dishone.st> * ospf_packet.c: replace ospf_swap_iph_to... with sockopt_iphdrincl_swab_... 2004-10-03 James R. Leu <jleu at mindspring.com> * ospf_zebra.c: Read router id related messages from zebra daemon. Schedule router-id update thread if it's changed. * ospfd.c: Remove own router-id selection function. Use router id from zebra daemon if it isn't manually overriden in configuration. 2004-09-27 Paul Jakma <paul@dishone.st> * ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER Apply to offset too. Print ip_cksum, lets not worry about possible 2.0.37 compile problems. * ospf_packet.c: (ospf_swap_iph_to{n,h}) Use HAVE_IP_HDRINCL_BSD_ORDER. (ospf_recv_packet) ditto. (ospf_write) Fixup iov argument to ospf_write_frags. (struct msghdr).msg_name is caddr_t on most platforms. (ospf_recv_packet) ditto. And msg_flags is not always there memset struct then set fields we care about rather than initialise all fields individually. 2004-09-26 Hasso Tepper <hasso at quagga.net> * ospf_abr.c, ospf_dump.c, ospf_lsa.c, ospf_packet.c, ospf_vty.c, ospf_zebra.c: Fix compiler warnings. 2004-09-24 Paul Jakma <paul@dishone.st> * ospf_apiserver.{c,h}: lists typedef removal cleanup. update some list loops to LIST_LOOP. some miscellaneous indent fixups. (ospf_apiserver_unregister_opaque_type) fix listnode_delete of referenced node in loop. (ospf_apiserver_term) loops calling ospf_apiserver_free, which deletes referenced nodes from apiserver_list, fixed. * ospf_interface.h: lists typedef removal cleanup. * ospf_opaque.{c,h}: lists typedef removal cleanup. update some list loops to LIST_LOOP. miscellaneous style and indent fixups. * ospf_te.{c,h}: ditto * ospf_packet.c: lists typedef removal cleanup. (ospf_write) ifdef fragmentation support. move actual fragmentation out to a new, similarly ifdefed, function. (ospf_write_frags) fragmented write support, moved from previous. 2004-09-23 Hasso Tepper <hasso at quagga.net> * *.[c|h]: list -> struct list *, listnode -> struct listnode *. 2004-09-12 Paul Jakma <paul@dishone.st> * ospf_packet.c: Fix bugzilla #107 (ospf_packet_max) get rid of the magic 88 constant (ospf_swab_iph_ton) new function. set ip header to network order, taking BSDisms into account. (ospf_swab_iph_toh) the inverse. (ospf_write) Add support for IP fragmentation, will only work on linux though, other kernels make it impossible. get rid of the magic 4 constant. (ospf_make_ls_upd) Bound check to end of stream, not to interface mtu. (ospf_ls_upd_packet_new) New function, allocate upd packet taking oversized LSAs into account. (ospf_ls_upd_queue_send) use ospf_ls_upd_packet_new to allocate, rather than statically allocating mtu sized packet buffer, which actually was wrong - it didnt take ip header into account, which should not be included in packet buffer. (ospf_ls_upd_send_queue_event) minor tweaks and remove TODO comment. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_spf.c (ospf_spf_calculate): Many more comments and debug print statements. New function ospf_vertex_dump used in debugging. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_spf.h (struct vertex): Comments for flags and structure members. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_route.c: When finding an alternate route, log cost as well. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_interface.c (ospf_lookup_if_params): Initialize af in struct prefix allocated on stack. 2004-08-31 David Wiggins <dwiggins@bbn.com> * ospf_packet.c (ospf_ls_ack_send_delayed): In p2mp mode, send acks to AllSPFRouters, rather than All-DR. 2004-08-27 Hasso Tepper <hasso at quagga.net> * ospf_vty.c: Don't print ospf network type under interface only if interface is in broadcast mode and interface type really is broadcast. Fixes Bugzilla #108. 2004-08-27 David Wiggins <dwiggins@bbn.com> * ospf_spf.c (ospf_nexthop_calculation): Initialize address family in on-stack struct prefix_ipv4. Fixes point-to-multipoint SPF calculation. 2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com> * ospf_packet.c (ospf_recv_packet): adjust size declaration of buffer used to get interface index so that it compiles on other than Linux and includes the required alignment space. Probably this was only working on sparc/sparc64 because most of sockaddr_dl was not being written. 2004-08-19 Paul Jakma <paul@dishone.st> * ospf_packet.c: update to match sockopt renames. 2004-08-04 Paul Jakma <paul@dishone.st> * ospf_spf.c: (ospf_spf_consider_nexthop) Add comment about issue. Compare only against list head - all nexthops must be same cost anyway, fixes a reference-listnode-after-delete bug noted by Kir Kostuchenko. (ospf_nexthop_calculation) Use ospf_spf_consider_nexthop for all candidates attached to root. 2004-07-27 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_ls_upd_send_queue_event) fix thinko from last fix for ospfd wedging due to oversize LSAs: dont list loop on ospf_ls_upd_queue_send() - guaranteed segfault. 2004-07-27 Paul Jakma <paul@dishone.st> * ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out the LSA as then free_opaque_info_per_id() can never unlock (and free) the LSA. Reported by Gunnar Stigen. 2004-07-23 Paul Jakma <paul@dishone.st> * ospf_network.c: Replace PKTINFO/RECVIF with call to setsockopt_pktinfo * ospf_packet.c: Use getsockopt_pktinfo_ifindex and SOPT_SIZE_CMSG_PKTINFO_IPV4. 2004-07-14 Paul Jakma <paul@dishone.st> * ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for problem reported by Peter Frost amongst others, where function will spin indefinitely if update list contains LSAs greater than MTU-headers or other condition leading to update list never being cleared. Problem of what to do with these LSAs remains. (ospf_make_ls_upd) add comment about large LSA problem, indentation cleanup. 2004-07-01 Greg Troxel <gdt@fnord.ir.bbn.com> * Makefile.am (lib_LTLIBRARIES): make libospf shared 2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com> * Makefile.am: Add shlib support. 2004-06-10 Hasso Tepper <hasso@estpak.ee> * *: Removed ifdefs HAVE_NSSA. 2004-06-06 Paul Jakma <paul@dishone.st> * ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous. ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format 2004-05-31 Sagun Shakya <sagun.shakya@sun.com> * ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if index is out of range. ospf_flood.c: endianness fix ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum in various places. 2004-05-10 Hasso Tepper <hasso@estpak.ee> * ospf_zebra.c, ospfd.c: Move ospf_prefix_list_update() function to ospf_zebra.c from ospfd.c and add redistribution updates if route-map is used in redistribution. * ospf_main.c: Remove now useless call to ospf_init(). 2004-05-08 Paul Jakma <paul@dishone.st> * ospf_zebra.c: Sync with lib/zclient changes 2004-05-05 Paul Jakma <paul@dishone.st> * ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is defined. Warn at compile and runtime. Use IPTOS_PREC_INTERNETCONTROL otherwise. * ospf_packet.c: (ospf_associate_packet_vl) cleanup, move some of the checks up to ospf_read, return either a virtual link oi, or NULL. (ospf_read) Cleanup, make it responsible for checks. Remove the nbr lookup - moved to ospf_neighbor. Adjust all nbr lookups to use new wrappers exported by ospf_neighbor. * ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup. * ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface neighbour table by router-id for virtual-link ospf_interfaces, not by peer_addr (which breaks for asymmetric vlinks) (ospf_nbr_lookup) add a wrapper for nbr lookups to deal with above. * ospf_interface.c: (ospf_vl_set_params) Catch changes of interface address for either end of a virtual-link, and hence potential cost changes. 2004-04-22 Hasso Tepper <hasso@estpak.ee> * ospf_zebra.c: Don't ignore reject/bh routes, it's the only way to "summarize" routes in ASBR at the moment. 2004-04-20 Hasso Tepper <hasso@estpak.ee> * ospfd.c: Unset NP flag if area is going to be normal or stub. Fixes UNH OSPF_NSSA.1.2a comment. * ospf_abr.c: Originate default into stub/nssa area even if summaries are disabled. * ospf_zebra.c: Don't attempt to redistribute 127.0.0.0/8. 2004-04-19 Hasso Tepper <hasso@estpak.ee> * ospf_vty.c: Don't warn that export- and import-list can't be configured to backbone area if they are applied and are working fine. 2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com> * ospf_packet.c: Don't drop packets in Solaris x86. [quagga-dev 1005]. 2004-03-18 Amir Guindehi <amir@datacore.ch> * ospf_opaque.c: Attempt to correct the incorrect behavior of Quagga's ospfd in the special situation that a node's opaque capability has changed as "ON -> OFF -> ON". [quagga-dev 843]. 2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com> * ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range should be configured with the highest cost path within the range, not lowest. 2004-02-17 Paul Jakma <paul@dishone.st> * ospf_zebra.c: (ospf_interface_delete) Do not delete the interface params, nor the interface structure, if an interface delete message is received from zebra. * ospf_interface.c: (ospf_if_delete_hook) Delete the interface params and interface, ie that which was previously removed in (ospf_interface_delete) above. 2004-02-11 Hasso Tepper <hasso@estpak.ee> * ospf_interface.c, ospf_zebra.c: Don't attempt to read path->oi->ifp if oi doesn't exist any more. 2004-02-11 Vadim Suraev <vadim.suraev@terayon.com> * ospf_packet.c (ospf_ls_upd): Router should flush received network LSA if it was originated with older router-id ([zebra 14710] #6). 2003-12-08 Mattias Amnefelt <mattiasa@kth.se> * ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len network byte order. 2003-12-05 Greg Troxel <gdt@poblano.ir.bbn.com> * ospfd.c (ospf_network_match_iface): Rewrite code for clarity while trying not to change semantics. Add ifdefed-out code to avoid matching ppp interfaces whose destination address does not also match the prefix under consideration, to help out people with problems due to as-yet-unfixed bugs with p2p interfaces coming and going. 2003-07-25 kamatchi soundaram <kamatchi@tdd.sj.nec.com> * ospf_packet.c (ospf_ls_upd_send_queue_event): get next route node in body of the loop to avoid chance that route node is unlocked and deleted before the next iteration tries to get next route node. 2003-05-24 Kenji Yabuuchi * ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific match for interface lookup. 2003-05-18 Hasso Tepper <hasso@estpak.ee> * ospf_vty.c: Show NSSA LSA route info in "show ip ospf database" output 2003-05-16 Hasso Tepper <hasso@estpak.ee> * ospf_lsa.c: Fix handling of NSSA 2003-04-23 Hasso Tepper <hasso@estpak.ee> * ospf_vty.c: fix "router xxx" node commands in vtysh 2003-04-19 Hasso Tepper <hasso@estpak.ee> * {ospf_abr,ospfd}.c: area id's DECIMAL -> ADDRESS * ospf_routemap.c: sync daemon's route-map commands to have same syntax. 2003-04-19 Sergey Vyshnevetskiy <serg@vostok.net> * ospf_packet.c: Add missing param to zlog * ospf_flood.c: remove unused vars 2003-04-17 Denis Ovsienko <zebra@pilot.org.ua> * ospf_interface.c: fix incorrect memset 2003-04-10 Amir Guindehi <amir@datacore.ch> * ospf_lsa.[ch]: opaque LSA fix, use ospf_lookup. 2003-04-03 David Watson <dwatson@eecs.umich.edu> * ospf_lsa.c: byte order fix 2002-03-17 Amir Guindehi <amir@datacore.ch> * ospf_apiserver.[ch]: Merge Ralph Keller's OSPFAPI support. * ospf_api.[ch]: Merge Ralph Keller's OSPFAPI support. * ospfclient: OSPFAPI demonstration client. 2003-01-23 Masahiko Endo <endo@suri.co.jp> * ospf_ism.c: NSM event schedule bug fix. 2002-10-30 Greg Troxel <gdt@ir.bbn.com> * ospf_packet.c (ospf_make_md5_digest): MD5 length fix. 2002-10-23 endo@suri.co.jp (Masahiko Endo) * ospf_opaque.c: Update Opaque LSA patch. 2002-10-23 Ralph Keller <keller@tik.ee.ethz.ch> * ospf_vty.c (show_ip_ospf_database): Fix CLI parse. 2002-10-23 Juris Kalnins <juris@mt.lv> * ospf_interface.c (ospf_if_stream_unset): When write queue becomes empty stop write timer. 2002-10-10 Greg Troxel <gdt@ir.bbn.com> * ospf_packet.c (ospf_check_md5_digest): Change >= to > to make it conform to RFC. 2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * zebra-0.93 released. 2002-06-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_spf.c (ospf_nexthop_calculation): Add NULL set to oi and check of l2. Reported by: Daniel Drown <dan-zebra@drown.org> (ospf_lsa_has_link): LSA Length calculation fix. Reported by: Paul Jakma <paulj@alphyra.ie>. * ospfd.c (ospf_if_update): Fix nextnode reference bug. Reported by: juris@mt.lv. 2002-01-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospfd.c: Merge [zebra 11445] Masahiko ENDO's Opaque-LSA support. 2001-08-27 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_interface.c (ospf_add_to_if): Use /32 address to register OSPF interface information. (ospf_delete_from_if): Likewise. * ospf_zebra.c (ospf_interface_address_delete): Likewise. 2001-08-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_zebra.c (ospf_redistribute_unset): When redistribute type is OSPF, do not unset redistribute flag. 2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * zebra-0.92a released. 2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * zebra-0.92 released. 2001-08-12 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospfd.c (ospf_config_write): auto-cost reference-bandwidth configuration display. 2001-07-24 David Watson <dwatson@eecs.umich.edu> * ospf_spf.c (ospf_spf_next): Modify ospf_vertex_add_parent to check for an existing link before connecting the parent and child. ospf_nexthop_calculation is also modified to check for duplicate entries when copying from the parent. Finally, ospf_spf_next removes duplicates when it merges two equal cost candidates. 2001-07-23 itojun@iijlab.net * ospfd.c (show_ip_ospf_neighbor): Check ospf_top before use it [zebra 8549]. 2001-07-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_packet.c (ospf_write): Remove defined(__OpenBSD__) to make it work on OpenBSD. 2001-06-26 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_zebra.c (config_write_ospf_default_metric): Display default-metric configuration. 2001-06-18 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_ia.h (OSPF_EXAMINE_SUMMARIES_ALL): Remove old macros. 2001-05-28 Kunihiro Ishiguro <kunihiro@ipinfusion.com> * ospf_snmp.c (ospfIfEntry): Fix interface lookup bug to avoid crush. (ospfIfMetricEntry): Likewise. 2001-03-18 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_read): Fix typo. Reported by: "Jen B Lin'Kova" <jen@stack.net>. 2001-03-15 Gleb Natapov <gleb@nbase.co.il> * ospf_interface.c (ip_ospf_network): Set interface parameter. (interface_config_write): Add check for OSPF_IFTYPE_LOOPBACK. * ospf_zebra.c (ospf_interface_add): Set interface parameter. 2001-02-21 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_recv_packet): Solaris also need to add (iph.ip_hl << 2) to iph.ip_len. 2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org> * ospfd.h (OSPF_LS_REFRESH_TIME): Fix OSPF_LS_REFRESH_TIME value. Suggested by: David Watson <dwatson@eecs.umich.edu>. * ospf_zebra.c (zebra_init): Remove zebra node. * ospfd.c (ospf_area_range_set): Function name is changed from ospf_ara_range_cmd. (ospf_area_range_unset): New function which separated from DEFUN. New commands are added: "no area A.B.C.D range A.B.C.D/M advertise" "no area <0-4294967295> range A.B.C.D/M advertise" "no area A.B.C.D range A.B.C.D/M not-advertise" "no area <0-4294967295> range A.B.C.D/M not-advertise" * ospf_lsa.c (ospf_lsa_more_recent): Fix previous change. 2001-02-08 Matthew Grant <grantma@anathoth.gen.nz> * ospf_network.c (ospf_if_add_allspfrouters): Use setsockopt_multicast_ipv4. (ospf_if_drop_allspfrouters): Likewise. * ospf_lsa.c (ospf_router_lsa_install): Add rt_recalc flag. (ospf_network_lsa_install): Likewise. (ospf_summary_lsa_install): Likewise. (ospf_summary_asbr_lsa_install): Likewise. (ospf_external_lsa_install): Likewise. (ospf_lsa_install): Call ospf_lsa_different to check this LSA is new one or not. 2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_zebra.c (ospf_interface_delete): Do not free interface structure when ospfd receive interface delete message to support pseudo interface. 2001-02-01 Dick Glasspool <dick@ipinfusion.com> * ospfd.c (area_range_notadvertise): Change area range "suppress" command to "not-advertise". * ospfd.h (OSPF_LS_REFRESH_TIME): Change OSPF_LS_REFRESH_TIME from 1800 to 60. * ospf_abr.c (ospf_abr_update_aggregate): When update_aggregate is updating the area-range, the lowest cost is now saved. * ospf_lsa.c (ospf_lsa_more_recent): Routing to compare sequence numbers rather than creating overflow during calculation. 2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org> * zebra-0.91 is released. 2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_db_desc_proc): Do not continue process when NSM_SeqNumberMismatch is scheduled. (ospf_ls_req): Free ls_upd when return from this function. (ospf_ls_upd_timer): When update list is empty do not call ospf_ls_upd_send(). Suggested by: endo@suri.co.jp (Masahiko Endo). 2001-01-26 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_lsa.c (ospf_maxage_flood): Flood LSA when it reaches MaxAge. RFC2328 Section 14. (ospf_maxage_lsa_remover): Call above function during removing MaxAge LSA. 2001-01-26 Dick Glasspool <dick@ipinfusion.com> * ospf_flood.c (ospf_flood_through_as): Function is updated for NSSA Translations now done at ospf_abr.c with no change in P-bit. * ospf_lsa.c (ospf_get_nssa_ip): Get 1st IP connection for Forward Addr. (ospf_install_flood_nssa): Leave Type-7 LSA at Lock Count = 2. * ospf_ase.c (ospf_ase_calculate_route): Add debug codes. * ospf_abr.c (ospf_abr_translate_nssa): Recalculate LSA checksum. * ospf_packet.h (OSPF_SEND_PACKET_LOOP): Added for test packet. * ospf_dump.c (ospf_lsa_type_msg): Add OSPF_GROUP_MEMBER_LSA and OSPF_AS_NSSA_LSA. * ospfd.c (data_injection): Function to inject LSA. This is debugging command. 2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_route.c (ospf_route_match_same): Remove function. (ospf_route_match_same_new): Renamed to ospf_route_match_same. * ospf_zebra.c (ospf_interface_address_delete): Add check for oi->address. Suggested by Matthew Grant <grantma@anathoth.gen.nz>. (ospf_zebra_add): Remove function. (ospf_zebra_add_multipath): Rename to ospf_zebra_add. * ospf_interface.c: Remove HAVE_IF_PSEUDO part. * ospf_zebra.c: Likewise. 2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_ase.c: Remove OLD_RIB part. * ospf_route.c: Likewise. * zebra-0.90 is released. * ospf_packet.c (ospf_recv_packet): Use ip_len adjestment code to NetBSD. 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_route.c (ospf_route_delete): Use ospf_zebra_delete_multipath. 2001-01-09 Matthew Grant <grantma@anathoth.gen.nz> * ospf_interface.c (ospf_if_cleanup): Function name is renamed from ospf_if_free(). Rewrite whole procudure to support primary address deletion. * ospf_zebra.c (ospf_interface_address_delete): Add primary address deletion process. 2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org> * ospf_packet.c (ospf_recv_packet): OpenBSD has same ip_len treatment like FreeBSD. 2001-01-09 endo@suri.co.jp (Masahiko Endo) * ospf_packet.c (ospf_recv_packet): FreeBSD kernel network code strips IP header size from receiving IP Packet. So we adjust ip_len to whole IP packet size by adding IP header size. 2001-01-08 endo@suri.co.jp (Masahiko Endo) * ospf_network.c (ospf_serv_sock): When socket() is failed return
2005-02-092005-02-09 Paul Jakma <paul.jakma@sun.com>paul
* (global) Update code to match stream.h changes. stream_get_putp effectively replaced with stream_get_endp. stream_forward renamed to stream_forward_getp. stream_forward_endp introduced to replace some previous setting/manual twiddling of putp by daemons. * lib/stream.h: Remove putp. Update reference to putp with endp. Add stream_forward_endp, which daemons were doing manually. Rename stream_forward to stream_forward_getp. lib/stream.c: Remove/update references to putp. introduce stream_forward_endp.
2005-02-092005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the error message.
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Improve passive_interface comment. Add new multicast_memberships bitmask to struct ospf_interface to track active multicast subscriptions. Declare new function ospf_if_set_multicast. * ospf_interface.c: (ospf_if_set_multicast) New function to configure multicast memberships properly based on the current multicast_memberships status and the current values of the ospf_interface state, type, and passive_interface status. (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is now handled by ism_change_state's call to ospf_if_set_multicast). (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now handled by ism_change_state). * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave the DRouters multicast group (now handled by ism_change_state's call to ospf_if_set_multicast). (ism_change_state) Add call to ospf_if_set_multicast to change multicast memberships as necessary to reflect the new interface state. * ospf_packet.c: (ospf_hello) When a Hello packet is received on a passive interface: 1. Increase the severity of the error message from LOG_INFO to LOG_WARNING; 2. Add more information to the error message (packet destination address and interface address); and 3. If the packet was sent to ospf-all-routers, then try to fix the multicast group memberships. (ospf_read) When a packet is received on an interface whose state is ISM_Down, enhance the warning message to show the packet destination address, and try to update/fix the multicast group memberships if the packet was sent to a multicast address. When a packet is received for ospf-designated-routers, but the current interface state is not DR or BDR, then increase the severity level of the error message from LOG_INFO to LOG_WARNING, and try to fix the multicast group memberships. * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from active to passive. (no_ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from passive to active. (show_ip_ospf_interface_sub) Show multicast group memberships.
2005-02-082005-02-08 Paul Jakma <paul@dishone.st>paul
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
2005-02-022005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down, not for event ISM_InterfaceDown. And improve the message by adding the interface flags. * if.h: Declare if_flag_dump. [backport candidate]