summaryrefslogtreecommitdiff
path: root/ospfd/ospf_vty.c
AgeCommit message (Collapse)Author
2005-03-292005-03-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_vty.c (show_ip_ospf_interface_sub): Display interface MTU and bandwidth; this is useful for debugging problems. Also, the function should be static.
2005-02-082005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Improve passive_interface comment. Add new multicast_memberships bitmask to struct ospf_interface to track active multicast subscriptions. Declare new function ospf_if_set_multicast. * ospf_interface.c: (ospf_if_set_multicast) New function to configure multicast memberships properly based on the current multicast_memberships status and the current values of the ospf_interface state, type, and passive_interface status. (ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is now handled by ism_change_state's call to ospf_if_set_multicast). (ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now handled by ism_change_state). * ospf_ism.c: (ospf_dr_election) Remove logic to join or leave the DRouters multicast group (now handled by ism_change_state's call to ospf_if_set_multicast). (ism_change_state) Add call to ospf_if_set_multicast to change multicast memberships as necessary to reflect the new interface state. * ospf_packet.c: (ospf_hello) When a Hello packet is received on a passive interface: 1. Increase the severity of the error message from LOG_INFO to LOG_WARNING; 2. Add more information to the error message (packet destination address and interface address); and 3. If the packet was sent to ospf-all-routers, then try to fix the multicast group memberships. (ospf_read) When a packet is received on an interface whose state is ISM_Down, enhance the warning message to show the packet destination address, and try to update/fix the multicast group memberships if the packet was sent to a multicast address. When a packet is received for ospf-designated-routers, but the current interface state is not DR or BDR, then increase the severity level of the error message from LOG_INFO to LOG_WARNING, and try to fix the multicast group memberships. * ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from active to passive. (no_ospf_passive_interface) Call ospf_if_set_multicast for any ospf interface that may have changed from passive to active. (show_ip_ospf_interface_sub) Show multicast group memberships.
2004-12-22Show sums of checksums in "show ip ospf" output. Okayed by Paul and Jameshasso
R. Leu (author of original idea).
2004-12-22Fix "show ip ospf" output. If router is configured as "translate-never", wehasso
say so - we can never be translator.
2004-12-152004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_interface.h: Declare new function ospf_default_iftype. * ospf_interface.c: (ospf_default_iftype) New function to centralize this logic in one place. * ospf_zebra.c: (ospf_interface_add) Use new function ospf_default_iftype. * ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic by using new function ospf_default_iftype.
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-10-19OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,hasso
ripd might need some more testing though.
2004-10-112004-10-11 Paul Jakma <paul@dishone.st>paul
* (global) Const char update and signed/unsigned fixes. * (various headers) size defines should be unsigned. * ospf_interface.h: remove duplicated defines, include the authoritative header - though, these defines should probably be moved to a dedicated header, or ospfd.h. * ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned. * ospf_packet.c: (ospf_write) cast result of shift to unsigned.
2004-10-08Compiler warnings fixes round 1.hasso
2004-09-26Compiler warnings fixes.hasso
2004-09-23Remove usage of evil list and listnode typedefs.hasso
2004-08-31Fix for Bugzilla #108.hasso
2004-06-20Remove ifdef's HAVE_NSSA. NSSA support is stable enough.hasso
2004-04-19Ooops. Check if area-id format is valid.hasso
2004-04-19****! What else I will discover while documenting this code? Remove uselesshasso
warnings and update documentation.
2004-03-20Fix segfault in ospfd - [quagga-dev 980].hasso
2003-08-102003-08-10 amir <amir@datacore.ch>paul
* Add missing 'i' to getopts, short form of --pid_file. see http://bugzilla.quagga.net/show_bug.cgi?id=25
2003-08-062003-08-06 Anders K. Pedersen <mailnews+router-quagga-dev@news.cohaesio.com>paul
* ospfd/ospf_vty.c: (ospf_config_write) fix output of passive-interface when IP has been specified - we still need to print the interface.
2003-06-302003-06-30 Paul Jakma <paul@dishone.st>paul
* (show_ip_ospf_database_header) Fix unconditional NSSA-dependent printf.
2003-06-272003-06-27 Paul Jakma <paul@dishone.st>paul
* ospf_vty.c: (global) add, unused, description array for lsa flags. (show_ip_ospf_database_header): pretty print options, printf hex numbers as 0x, print lsa flags and note if it is a translated LSA. (show_lsa_detail_proc): print out OSPF_LSA_LOCAL_XLT LSAs. * ospf_packet.c: (ospf_write) print out destination IP in debug info if write fails.
2003-06-222003-06-19 Paul Jakma <paul@dishone.st>paul
* ospf_vty.c (ospf_area_stub_no_summary): fix typo. (ospf_area_nssa_cmd_handler): new function to handle the area.*nssa commands. (ospf_area_nssa_cmd): changed to call ospf_area_nssa_cmd_handler (ospf_area_nssa_translate_cmd) ditto (ospf_area_nssa_translate_cmd): changed from ALIAS to defun, call ospf_area_nssa_cmd_handler (ospf_area_nssa_translate_no_summary_cmd): ditto (no_ospf_area_nssa_cmd): call ospf_schedule_abr_task() (show_ip_ospf_area): Formatting cleanups. Properly print out NSSA area configuration. show_router_lsa_detail: Add missing newline (show_network_lsa_detail): ditto (show_summary_lsa_detail): ditto (show_summary_asbr_lsa_detail): ditto (show_ip_ospf_route_router): fix spacing (config_write_ospf_area): actually write out proper state for NSSA area.
2003-05-23From: Hasso Tepper <hasso@estpak.ee>paul
Add the 'no interface' command to all the daemons and vtysh. now it's possible to delete interface from routeing daemons as well only if it doesn't exist in os. http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
2003-05-23Undo Hasso last patch, about to apply a slightly updated patch.paul
2003-05-23From: Hasso Tepper <hasso@estpak.ee>paul
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch Add the 'no interface' command to all the daemons and vtysh.
2003-05-18From: Hasso Tepper <hasso@estpak.ee>paul
Subject: [zebra 19093] [PATCH] Two more fixes Show NSSA LSA route info in "show ip ospf database" output
2003-04-23From: Hasso Tepperpaul
This one fixes "router xxx" node commands in vtysh. Don't get "unknown command" error when entering "passive-interface eth0" command while ospfd and ospf6d running etc.
2003-04-042003-04-04 Paul Jakma <paul@dishone.st>paul
* Sync to Zebra CVS * Fix lib/thread.h leak * Fix small Opaque LSA leak * Do not configure OSPF interfaces for secondary addresses * vtysh fixes from Hasso * Dave Watson's missing ntohs fix
2003-03-252003-03-25 Paul Jakma <paul@dishone.st>paul
* sync to latest zebra CVS * spec file: updated and added define for ospf-api/client NB: OSPF-API has been broken by the zebra.org changes, which has added struct ospf * as a new arg to many functions
2002-12-13zebra link state detection supportpaul
2002-12-13Initial revisionpaul