| Age | Commit message (Collapse) | Author |
|---|
|
2006-11-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_vty.c: (ospf_passive_interface_default) Take additional
'newval' arg so we can update ospf->passive_interface_default inside
this function. More importantly, we now call ospf_if_set_multicast
on all ospf_interfaces.
(ospf_passive_interface, no_ospf_passive_interface) Fix bug:
for 'default' case, argv[0] is undefined, so we must test for
(argc == 0) before using argv[0]. And since
ospf_passive_interface_default now calls ospf_if_set_multicast as
needed, we can just return after calling
ospf_passive_interface_default.
|
|
2006-10-22 Yar Tikhiy <yar@comp.chem.msu.su>
* (general) Add support for passive-interface default (with
minor edits by Paul Jakma).
* ospf_interface.h: Add OSPF_IF_PASSIVE_STATUS macro, looking
at configured value, or the global 'default' value, as
required.
* ospf_interface.c: (ospf_if_new_hook) Leave passive
unconfigured per default, allowing global 'default' to
take effect for unconfigured interfaces.
* ospf_packet.c: (various) use OSPF_IF_PASSIVE_STATUS
* ospf_vty.c: (ospf_passive_interface_default) new function,
unset passive from all interfaces if default is enabled, as
the per-iface settings become redundant.
(ospf_passive_interface_update) new func, update passive
setting taking global default into account.
({no,}ospf_passive_interface_addr_cmd) Add support for
'default' variant of command.
(show_ip_ospf_interface_sub) Update to take global
default into account when printing passive status.
(ospf_config_write) ditto.
* ospfd.c: (ospf_new) set global passive-interface default.
* ospfd.h: (struct ospf) Add field for global
passive-interface.
|
|
2006-08-25 Paul Jakma <paul.jakma@sun.com>
* (general) Bug #134. Be more robust to backward time changes,
use the newly added libzebra time functions.
In most cases: recent_time -> recent_relative_time()
gettimeofday -> quagga_gettime (QUAGGA_CLK_MONOTONIC, ..)
time -> quagga_time.
(ospf_make_md5_digest) time() call deliberately not changed.
(ospf_external_lsa_refresh) remove useless gettimeofday, LSA
tv_orig time was already set in ospf_lsa_new, called via
ospf_external_lsa_new.
|
|
2006-07-25 Paul Jakma <paul.jakma@sun.com>
* ospf_neigbor.h: (struct ospf_neighbor) Add some additional
neighbour state statistics fields, timestamps for progressive
and regressive state changes, and pointer to event string
for the latter state change.
* ospf_nsm.c: (nsm_notice_state_change) Update new state changs
history as required.
* ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print out above
new per-neighbour state change stats.
|
|
2006-07-10 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (ospf_nsm_event) Record state change timestamp
and event in nbr struct.
* ospf_neighbor.h: (struct ospf_neighbor) Add fields to record
timestamp of last NSM change and event.
* ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print
last state change timestamp and event, if available.
|
|
2006-06-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_vty.c: (show_ip_ospf_neighbor_id) Should show all instances
of that neighbor (since it may appear on multiple interfaces)
instead of bailing out after showing the first match.
|
|
2006-06-28 Erik Muller <erikm@internap.com>
* ospfd.h: Define 2 new struct ospf config flags:
OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL
* ospf_nsm.c (nsm_change_state): Log adjacency changes if
requested.
* ospf_vty.c (ospf_log_adjacency_changes): New command function
to implement ospf subcommand "log-adjacency-changes [detail]".
(no_ospf_log_adjacency_changes) Turn off log-adjacency-changes.
(show_ip_ospf) Show whether adjacency changes are logged.
(ospf_config_write) Add "log-adjacency-changes [detail]" to config.
(ospf_vty_init) Add ospf_log_adjacency_changes and
no_ospf_log_adjacency_changes.
* ospfd.texi: Document new ospf router subcommand
"log-adjacency-changes [detail]".
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (general) Replace in-place route redistribution
command and help strings with the new auto-generated defines
from lib/route_types.h
|
|
2006-06-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_vty.c: ({no_,}ospf_passive_interface) Replace if_lookup_by_name
with a call to if_get_by_name -- if the interface does not exist
already, it should be created. And remove the obsolete warning
message.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* Reported by Milan Koci
* ospf_interface.h: (struct ospf_if_info) Add reference counts
for multicast group memberships. Add various macros to help
manipulate/check membership state.
* ospf_interface.c: (ospf_if_set_multicast) Maintain the
ospf_if_info reference counts, and only actually drop
memberships if it hits 0, to avoid losing membership when
OSPF is disabled on an interface with multiple active OSPF
interfaces.
* ospf_packet.c: (ospf_{hello,read}) Use the new macros to
check/set
multicast membership.
* ospf_vty.c: (show_ip_ospf_interface_sub) ditto.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (no_ospf_area_filter_list) Check NULL result from
ospf_area_lookup_by_area_id, fixes Coverity CID #69
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (general) Audit ospf_lookup calls in commands,
ensure check for NULL result, make vty messages consistent.
(show_ip_ospf_interface) Missing NULL check on ospf_lookup
result, fixes Coverity CID #70.
|
|
2006-04-24 Paul Jakma <paul.jakma@sun.com>
* (general) More Virtual-link fixes, again with much help in
testing / debug from Juergen Kammer. Primarily in SPF.
* ospf_spf.h: Add guard. ospf_interface.h will include this
header.
* ospf_interface.h: Modify ospf_vl_lookup definition to take
struct ospf as argument, so as to allow for NULL area
argument.
(struct ospf_vl_data) Remove out_oi, instead add a struct
vertex_nexthop, to use as initial nexthop for backbone paths
through a vlink.
* ospf_interface.c: (ospf_vl_lookup) Modified to allow
NULL area to be passed to indicate "any" (first) area.
Add extra debug.
(ospf_vl_set_params) vl_oi -> nexthop. Add extra debug.
(ospf_vl_up_check) Fix debug, inet_ntoa returns a static
buffer..
* ospf_route.c: (ospf_intra_add_router) Vlinks dont go through
backbone, don't bother checking.
* ospf_spf.c: (static struct list vertex_list) Record vertices
that will need to be freed.
(cmp) Order network before router vertices, as required,
wasn't implemented.
(vertex_nexthop_free) Mild additional robustness check.
(vertex_parent_free) Take void argument, as this function
is passed as list deconstructor for vertex parent list.
(ospf_vertex_new) More debug. Set deconstructor for parent
list. Track allocated vertices on the vertex_list.
(ospf_vertex_free) Get rid of the tricky recursive cleanup of
vertices. Now frees only the given vertex.
(ospf_vertex_add_parent) Fix assert.
(ospf_nexthop_calculation) Fix calculation of nexthop for
VLink vertices, lookup the vl_data and use its previously
recorded nexthop information.
(ospf_spf_calculate) Vertices are freed simply by deleting
vertex_list nodes and letting ospf_vertex_free as deconstructor
work per-node.
(ospf_spf_calculate_timer) Trivial optimisation, leave
backbone SPF calculation till last to reduce SPF churn on
VLink updates.
* ospf_vty.c: (ospf_find_vl_data) update call to ospf_vl_lookup
(no_ospf_area_vlink_cmd) ditto.
(show_ip_ospf_interface_sub) For Vlinks, the peer address is
more interesting than the output interface.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
2006-01-10 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (config_write_ospf_distribute) trim down
redundant strings.
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* (general) s/graceful/deferred/ in all files, the former term
is confusing wrt OSPF Graceful-Restart.
* ospfd.c: (ospf_deferred_shutdown_check) dont return
a function which returns void. SOS complains about this.
(ospf_finish)
|
|
* ospfd.h: remove the OSPF_ROUTER_ID_UPDATE_DELAY define
(struct ospf) remove the router_id timer thread.
remove export of ospf_router_id_update_timer.
* ospfd.c: (ospf_router_id_update) call ospf_if_update to
poke interfaces into action after ID has been configured.
(ospf_router_id_update_timer) removed.
(ospf_finish_final) t_router_id_update timer is gone.
(ospf_network_run) router-id update timer gone.
call ospf_router_id_update directly if ID not configured.
In the per-iface loop, don't ospf_if_up interfaces if
ID is still not configured. The update function will call
ospf_if_update anyway.
(ospf_if_update) ID update timer is gone. Just return if no
ID is set.
* ospf_vty.c: (ospf_router_id) call ospf_router_id_update, no
timer needed.
* ospf_zebra.c: (ospf_router_id_update_zebra) call
ospf_router_id_update directly, not via timer.
|
|
2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_dump.h: Define OSPF_TIME_DUMP_SIZE as appropriate buffer size
for use with ospf_timer_dump and ospf_timeval_dump.
* ospf_vty.c: Change all buffer sizes used with ospf_timer_dump and
ospf_timeval_dump to have size OSPF_TIME_DUMP_SIZE.
(show_ip_ospf_interface_sub) Fix possible buffer overflow in
call to ospf_timer_dump.
|
|
* ospf_{dump,spf,vty}.c: Oops, use the internal tv_sub
function rather than unportable timersub.
|
|
* (general) RFC3137 stub-router support
* ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define.
(struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for
options, to allow shutdown to distinguish between complete
shutdown and shutdown of a subset of ospf instances.
(struct ospf)
Add stub_router_{startup,shutdown_}time, configuration of startup
and shutdown time for stub-router.
Add t_graceful_shutdown struct thread, timer for graceful
shutdown, if needed.
(struct ospf_area) Add stub_router_state - run time state of
stub-router for an area. Add flags for ADMIN, IS and WAS
states.
Add t_stub_router, timer thread to resend router-lsa for an
area.
* ospf_lsa.c: (ospf_link_cost) new simple function to spit out
either the given lnks cost or infinite cost if stub-router is
in effect.
(lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use
previous function for transit-links.
(ospf_stub_router_timer) timer thread for end of startup stub
router. Change state as required for the area and setup
re-origination of router-lsa.
(ospf_stub_router_check) Check/do whether stub-router should be
enabled, and whether it requires timer to be setup.
(ospf_router_lsa_new) call previous function at top.
(ospf_router_lsa_originate) no external callers, made static.
* ospf_lsa.h: (ospf_router_lsa_originate) removed.
* ospf_main.c: (sigint) make static.
remove call to exit, as ospf_terminate now deals with
exiting.
* ospf_route.c: (ospf_terminate) removed, now in ospfd.c.
* ospf_vty.c: (show_ip_ospf_area) print out state of
stub-router, if active.
(show_ip_ospf) print out configuration of stub-router
support, and details of graceful-shutdown if the timer is
active.
((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new
commands to (de-)?configure stub-router support.
(config_write_stub_router) write out config of stub-router.
(ospf_config_write) call previous.
(ospf_vty_init) install the new stub-router commands.
* ospfd.c: various functions made static.
(ospf_new) Set defaults for stub-router. Graceful shutdown
is made to default on, just to be adventerous.
(ospf_graceful_shutdown_finish) new function, final part of
shutdown.
(ospf_graceful_shutdown_timer) timer thread wrapper for
graceful-shutdown.
(ospf_graceful_shutdown_check) check whether to setup timer
for shutdown or proceed directly to final shutdown.
(ospf_terminate) moved here from ospf_route.c, call
ospf_finish for each instance.
(ospf_finish) renamed to ospf_finish_final and made static.
(ospf_finish) new function, exported wrapper around
ospf_graceful_shutdown_check.
(ospf_finish_final) complete shutdown of an instance.
Add missing TIMER_OFF's of two timer threads.
(ospf_area_free) opaque self lsa timer should be turned off.
|
|
* ospf_vty.c: (show_ip_ospf) fix display of SPF timer if it
has not yet been run.
|
|
* ospf_dump.c: (ospf_timeval_dump) fix ms adjustment, thanks to
Andrew Schorr.
* ospf_vty.c: (ospf_config_write) fix write out of spf timers
configuration.
|
|
* (general) SPF millisecond resolution timer with adaptive,
linear back-off holdtime. Prettification of ospf_timer_dump.
* ospf_dump.c: (ospf_timeval_dump) new function. The guts of
ospf_timer_dump, but made to be more dynamic in printing out
the relative timeval, sliding the precision printed out
according to the value.
(ospf_timer_dump) guts moved to ospf_timeval_dump.
* ospf_dump.h: export ospf_timeval_dump.
* ospf_flood.c: (ospf_flood) remove gettimeofday, use
the libzebra exported recent_time instead, as it's not
terribly critical to have time exactly right - the dropped
LSA will be retransmited to us if we don't ACK it.
* ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're
not transmitting, just putting LSA back on update transmit list.
* ospfd.h: delay and holdtimes should be unsigned.
Add spf_max_holdtime and spf_hold_multiplier.
Update default defines for delay and hold time to be in msec.
(struct ospf) change the SPF timestamp to a struct timeval.
Remove ospf_timers_spf_(un)?set.
* ospfd.c: (ospf_timers_spf_{set,unset}) removed.
(ospf_new) initialise spf_max_holdtime and spf_hold_multiplier
* ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval
now, update with gettimeofday.
(ospf_spf_calculate_schedule) Change SPF timers to millisecond
resolution.
Make the holdtime be adaptive, with a linear increase in
holdtime ever consecutive SPF run which occurs within holdtime
of previous SPF, bounded by spf_max_holdtime.
* ospf_vty.c: Update spf timers commands.
(ospf_timers_spf_set) trivial helper.
(ospf_timers_throttle_spf_cmd) new command to set SPF delay,
initial hold and max hold times with millisecond resolution.
(ospf_timers_spf_cmd) Deprecated. Accept the old values,
convert to msec, truncate to new limits.
(no_ospf_timers_throttle_spf_cmd) set timers to defaults.
(no_ospf_timers_spf_cmd) deprecated form, same as previous.
(show_ip_ospf_cmd) Display SPF parameters and times.
(show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne'
header.
(show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of
the multiple spaces which were making the lines even longer.
(show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header
(show_ip_ospf_neighbor_all_cmd) ditto and fix the field
widths for NBMA neighbours.
(show_ip_ospf_neighbor_int) Use header function.
(show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf,
local array - safer.
(show_ip_ospf_neighbor_detail_sub) ditto
(ospf_vty_init) install the new SPF throttle timer commands.
|
|
* (general) OSPF fast, sub-second hello and 1s dead-interval
support. A warning fix. Millisec support for ospf_timer_dump.
Change auto-cost ref-bandwidth to add a comment to write out
of config, rather than printing annoying messages to vty on
startup.
* ospf_dump.c: (ospf_timer_dump) Print out milliseconds too.
Callers typically specify a length of 9, so most see
millisecs unless they specify the additional length.
* ospf_interface.h: (struct ospf_interface) new interface param,
fast_hello.
* ospf_interface.c: (ospf_if_table_lookup) add brackets,
gcc warning fix.
(ospf_new_if_params) Initialise fast_hello param.
(ospf_free_if_params) Check whether fast_hello is configured.
(ospf_if_new_hook) set fast_hello to default.
* ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to
prevent funny side-effects from its if statement when this
macro is used conditionally by other macros.
(OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds.
(OSPF_HELLO_TIMER_ON) new macro to set hello timer according
to whether fast_hello is set.
* ospf_ism.c: Update all setting of the hello timer to use
either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The
former is used when hello is to be sent immediately.
* ospf_nsm.c: ditto
* ospf_packet.c: (ospf_hello) hello-interval is not checked
for mismatch if fast_hello is set.
(ospf_read) Annoying nit, fix "no ospf_interface" to be debug
rather than a warning, as it can be perfectly normal to
receive packets when logical subnets are used.
(ospf_make_hello) Set hello-interval to 0 if fast-hellos are
configured.
* ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying
nit, don't vty_out if this command is given, it gets tired
quick.
(show_ip_ospf_interface_sub) Print the hello-interval
according to whether fast-hello is set or not.
Print the extra 5 millisec characters from (ospf_timer_dump)
if fast-hello is configured.
(ospf_vty_dead_interval_set) new function, common to all
forms of dead-interval command, to set dead-interval and
fast-hello correctly. If a dead-interval is given, unset
fast-hello, else if a hello-multiplier is set, set
dead-interval to 1 and fast-hello to given multiplier.
(ip_ospf_dead_interval_addr_cmd) use
ospf_vty_dead_interval_set().
(ip_ospf_dead_interval_minimal_addr_cmd) ditto.
(no_ip_ospf_dead_interval) Unset fast-hello.
(no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval
should set it to OSPF_HELLO_INTERVAL_DEFAULT, not
OSPF_ROUTER_DEAD_INTERVAL_DEFAULT.
(config_write_interface) Write out fast-hello.
(ospf_config_write) Write a comment about
"auto-cost reference-bandwidth" having to be equal on all
routers. Hopefully just as noticeable as old practice of
writing to vty, but less annoying.
(ospf_vty_if_init) install the two new dead-interval
commands.
* ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL
and OSPF_FAST_HELLO_DEFAULT.
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever
cost is changed ( [no] ip ospf area XXX default-cost YYY)
Support ignore-mtu option
* ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT
* ospfd/ospf_packet.c: support ignore-mtu option
* ospfd/ospf_interface.h: field added for skipping MTU check
* ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete()
Set mtu_ignore field to default value
* ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area()
* ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP
correct values
* ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next()
convert OSPFIFSTATE internal status into SNMP values
|
|
* ospf_lsa.h: (ospf_external_lsa_flush) Comment out the 5th argument
(nexthop) since it is not used in the function (except inside
some commented-out code).
* ospf_lsa.c: (ospf_external_lsa_flush,ospf_external_lsa_refresh)
Comment out the 5th argument to ospf_external_lsa_flush.
* ospf_asbr.c: (ospf_redistribute_withdraw) Comment out 5th arg
to ospf_external_lsa_flush.
* ospf_vty.c: (no_ospf_default_information_originate) Eliminate 5th
uninitialized nexthop arg to ospf_external_lsa_flush.
* ospf_zebra.c: (ospf_zebra_read_ipv4) Comment out 5th arg
to ospf_external_lsa_flush.
* ospfd.c: (ospf_network_set) Comment out 5th arg
to ospf_external_lsa_flush.
|
|
Interface should be specified by name now.
[backport candidate]
|
|
print info about it.
Fixes bugzilla #213. [backport candidate]
|
|
* ospfd.h: add OSPF_ABR_DEFAULT for convenience, make
OSPF_ABR_CISCO be the default ABR type.
* ospfd.c: (ospf_new) initialise abr_type to OSPF_ABR_DEFAULT
* ospf_vty.c: (no_ospf_abr_type_cmd) add standard as a negatable
abr_type. default abr_type should be OSPF_ABR_DEFAULT.
(ospf_config_write) test whether default abr_type against
OSPF_ABR_DEFAULT, rather than any specific ABR_TYPE.
|
|
* (general) extern and static qualifiers added.
unspecified arguments in definitions fixed, typically they should
be 'void'.
function casts added for callbacks.
Guards added to headers which lacked them.
Proper headers included rather than relying on incomplete
definitions.
gcc noreturn function attribute where appropriate.
* ospf_opaque.c: remove the private definition of ospf_lsa's
ospf_lsa_refresh_delay.
* ospf_lsa.h: export ospf_lsa_refresh_delay
* ospf_packet.c: (ospf_make_md5_digest) make *auth_key const,
correct thing to do - removes need for the casts later.
* ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's
home-brewed versions, shuts up several warnings.
* ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and
VTY_GET_IPV4_PREFIX moved to lib/vty.h.
* ospf_zebra.c: (ospf_distribute_list_update_timer) hacky
overloading of the THREAD_ARG pointer should at least use
uintptr_t.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
* ospf_vty.c (show_ip_ospf_interface_sub): Display interface MTU and
bandwidth; this is useful for debugging problems. Also, the function
should be static.
|
|
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
|
|
R. Leu (author of original idea).
|
|
say so - we can never be translator.
|
|
* ospf_interface.h: Declare new function ospf_default_iftype.
* ospf_interface.c: (ospf_default_iftype) New function to centralize
this logic in one place.
* ospf_zebra.c: (ospf_interface_add) Use new function
ospf_default_iftype.
* ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic
by using new function ospf_default_iftype.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
ripd might need some more testing though.
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
warnings and update documentation.
|
|
|
|
* Add missing 'i' to getopts, short form of --pid_file.
see http://bugzilla.quagga.net/show_bug.cgi?id=25
|
