| Age | Commit message (Collapse) | Author |
|---|
|
* ospfd.h: add OSPF_ABR_DEFAULT for convenience, make
OSPF_ABR_CISCO be the default ABR type.
* ospfd.c: (ospf_new) initialise abr_type to OSPF_ABR_DEFAULT
* ospf_vty.c: (no_ospf_abr_type_cmd) add standard as a negatable
abr_type. default abr_type should be OSPF_ABR_DEFAULT.
(ospf_config_write) test whether default abr_type against
OSPF_ABR_DEFAULT, rather than any specific ABR_TYPE.
|
|
* (general) extern and static qualifiers added.
unspecified arguments in definitions fixed, typically they should
be 'void'.
function casts added for callbacks.
Guards added to headers which lacked them.
Proper headers included rather than relying on incomplete
definitions.
gcc noreturn function attribute where appropriate.
* ospf_opaque.c: remove the private definition of ospf_lsa's
ospf_lsa_refresh_delay.
* ospf_lsa.h: export ospf_lsa_refresh_delay
* ospf_packet.c: (ospf_make_md5_digest) make *auth_key const,
correct thing to do - removes need for the casts later.
* ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's
home-brewed versions, shuts up several warnings.
* ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and
VTY_GET_IPV4_PREFIX moved to lib/vty.h.
* ospf_zebra.c: (ospf_distribute_list_update_timer) hacky
overloading of the THREAD_ARG pointer should at least use
uintptr_t.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* ospfd.h: Add new field struct stream *ibuf to struct ospf.
* ospfd.c: (ospf_new) Check return code from ospf_sock_init.
Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1).
(ospf_finish) Call stream_free(ospf->ibuf.
* ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then
pass it to ospf_recv_packet for use in receiving the packet
(instead of allocating a new stream for each packet received).
Eliminate all calls to stream_free(ibuf).
(ospf_recv_packet) The struct stream *ibuf is now passed in as
an argument. No need to use recvfrom to peek at the packet
header (to see how big it is), just use ospf->ibuf which is
always large enough (this eliminates a system call to recvfrom).
Therefore, no need to allocate a stream just for this packet,
and no need to free it when done.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* ospfd.c: (ospf_network_match_iface) revert to previous network
statement match behaviour.
|
|
ripd might need some more testing though.
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
|
|
|
|
|
|
used in route-map used to filter redistributions.
* Move ospf_prefix_list_update() function from ospfd.c to ospf_zebra.c.
|
|
|
|
while trying not to change semantics. Add ifdefed-out code to
avoid matching ppp interfaces whose destination address does not
also match the prefix under consideration, to help out people with
problems due to as-yet-unfixed bugs with p2p interfaces coming and
going.
|
|
* ospfd/ospfd.c: if_is_pointopoint() takes (struct interface *), was
being called with struct connected. Change to co->ifp.
|
|
* ospfd/ospfd.c: Do not increment act_int for an area, as it is done
by ospf_ism.c::ism_change_state() - results in incorrect figure
for active interfaces in an area.
|
|
* zebra/connected.c: revert the 'generic PtP' patch as it causes
far too many problems. People who use FreeSWAN should investigate
native linux ipsec.
* zebra/rt_netlink.c: ditto
* lib/if.c: ditto
* ripd/ripd.h: ditto
* ripd/ripd.c: ditto
* ripd/rip_interface.c: ditto
* ospfd/ospfd.c: ditto
* ospfd/ospf_snmp.c: ditto
* bgpd/bgp_nexthop.c: ditto
|
|
* bgpd/bgp_routemap.c: attr->med is type u_in32_t, should be
compared with UINT32_MAX
* ospfd/ospfd.c: remove redundant assert
* zebra/rtadv.c: add missing include for zebra/rib.h
|
|
* (global): Add/fixup NSSA ABR translation functionality
* ospfd.h: Adjust the NSSA ROLE defines. Rename STATE to TRANSLATE.
Rename the LSA_NSSA_GET define to LSA_OPTIONS_NSSA_GET.
* ospfd.c: Adjust to match changes to ospfd.h
* ospf_te.c: Adjust to match change to LSA_NSSA_GET.
* ospf_lsa.h: slights reformatting.
Add new NSSA functions, ospf_translated_nssa_compare() (not
currently used), ospf_translated_nssa_refresh() and
ospf_translated_nssa_originate().
* ospf_lsa.c: Implemented aforementioned new functions. Fix up
several NSSA hooks to /not/ be called for Type-5s which are
translated. Add additional hooks. Set the ROUTER_LSA_NT bit in
router-lsa flags if ABR does translation. New function,
ospf_lsa_translated_nssa_new() implemented. Dont register
translated LSAs for refreshing - instead we implicitly rely on
the ASBR refreshing the Type-7, and refresh the translated Type-5
at the same time. Some minor reformatting. Extra debug info added.
Also, existing debug statements modified to report LSA Id.
* ospf_flood.c: call ospf_translated_nssa_refresh() when refreshing
Type-7. minor reformatting.
* ospf_dump.c: Dump NSSA LSAs.
* ospf_asbr.h: slight reformatting. Export
ospf_external_route_lookup() (though, not used. probably will
undo this).
* ospf_abr.c: Slight reformatting in many places. Update to match
ospfd.h changes.
(ospf_abr_translate_nssa): make it work, using the new ospf_lsa
translation functions.
(Several places): change struct prefix * to struct prefix_ipv4 *.
(might as well do the casts at higher levels). Add more debug
info.
(ospf_abr_announce_stub_defaults): announce default to NSSA areas
too.
(ospf_abr_announce_nssa_defaults): do nothing. this function
probably should die. (see ospf_abr_announce_stub_defaults).
(ospf_abr_task_timer): run NSSA tasks.
|
|
* ospfd.c (ospf_area_nssa_set): Set defaults for NSSA Role, State
and Stability Interval and no_summary.
(ospf_area_nssa_translator_role_(un?)set): Update to
NSSATranslatorRole
|
|
* Merge of zebra privileges
|
|
Subject: [zebra 17365] [PATCH] Ospf area id's DECIMAL -> ADDRESS
It was annoying for me to view area id's like 335544330 (20.0.0.10 in
address format) in configuration. Most of other network devices are
using address-like id's and so does zebra when using "show ip ospf *"
commands.
You can still enter id's in decimal format, but they are just shown in
address format.
|
|
|
|
* Sync to Zebra CVS
* Fix lib/thread.h leak
* Fix small Opaque LSA leak
* Do not configure OSPF interfaces for secondary addresses
* vtysh fixes from Hasso
* Dave Watson's missing ntohs fix
|
|
Preliminary fix to at least allow heartbeat to work with ospfd when
Heartbeat failover address has same prefixlength as main address.
|
|
* sync to latest zebra CVS
* spec file: updated and added define for ospf-api/client
NB: OSPF-API has been broken by the zebra.org changes, which
has added struct ospf * as a new arg to many functions
|
|
|
|
ospf_lsdb_free had been called. (efence caught this one).
This bug is present in zebra.org CVS
2. It fixes my previous ospf_network_match_iface patch ([zebra 17352])
- i lost a couple of checks in ospf_network_run() by mistake. this
patch isnt in zebra.org CVS, but it would be nice to have it once it
works.
This hopefully fixes the 'assert rn->info' problems people had with
zebra-pj yesterday.
|
|
[zebra 17352] ospf network matching (aka need for peer /32 for PtP)
change behaviour of network <prefix> area N statement wrt to PtP.
|
|
|
|
|
|
|
