| Age | Commit message (Collapse) | Author |
|---|
|
This code is only used one place and can be made local.
Gcc is smart enough to inline local functions if it wants to.
The function also has a big chunk of compatiablity code that
is no longer used; since quagga is now in a version control system
the source does not need to be used as a historical reference.
|
|
Makes it possible to run OSPF on multiple PtP interfaces
with the same remote address.
* ospfd/ospf_interface.c: Export ospf_if_table_lookup().
* ospfd/ospf_interface.h: ditto.
* ospfd/ospfd.c: (ospf_network_run_interface) Use ospf_if_table_lookup() to
determine whether OSPF is already configured for a subnet and interface.
|
|
|
|
This may fix vyatta BUG 3096. The reference count for OSPF route table was
never completely freed on deleting all neighbors.
|
|
Simple conversion of XMALLOC/memset to XCALLOC
|
|
* ospfd/ospfd.c: (opsf_if_update) Check if ospf_lookup() returns NULL.
Fixes bug introduced with recent ospf_network_run changes in
a49eb30a, where SEGV will happen if not the "router ospf" command has
been executed before the first interfaces are reported by zebra.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
Add an struct interface paramenter and adjust the affected
code accordingly.
The old code was a mess looping over all interfaces several times
when one interface was added/changed.
* ospfd/ospfd.h: Add struct interface parameter to ospf_if_update()
* ospfd/ospf_zebra.c: Add ifp arg to ospf_if_update() calls.
(ospf_interface_address_delete) delete ospf_if_update() call,
redundant as function calls ospf_if_free() itself.
* ospfd/ospfd.c: (ospf_network_unset) handle deconfiguration here,
rather than ospf_if_update.
(ospf_network_run_interface) ospf_network_run, for
any given interface.
(ospf_network_run) move guts to previous, and use it.
(ospf_if_update) Adjust to take struct interface as argument, as
all callers have a specific ifp in mind.
Iterate over ifp's connected list and call ospf_network_run_interface
instead of ospf_network_run, turning this path into O(nm) rather
than O(n^2).
Adjust all code dealing with opsf_if_update and ospf_network_run to
pass the new struct interface * arg.
(some minor modifications and bug-additions by Paul Jakma).
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
|
|
|
|
2007-04-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospfd/ospfd.c: (ospf_network_match_iface) Comment out
COMPATIBILITY_MODE. Going forward, the ospf "network" command
will use a simple test: does the network command prefix
contain the connected (destination) prefix of the interface?
* doc/ospfd.texi: Add a paragraph to the description of the OSPFv2
network command to explain how we handle interfaces with
peer addresses.
|
|
2007-02-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospfd.c: (ospf_terminate) Exit immediately if ospf is not
actually running (e.g. the config file was empty). Fixes
bug where SIGTERM would not kill ospfd.
|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-12-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospfd.c: (ospf_network_run) Remove an offending 'break' statement.
Previously, after creating a single ospf_interface on a given
network interface, the code would skip to the next interface
without considering other connected addresses on the interface.
After removing the 'break', we now consider all connected addresses.
|
|
2006-10-22 Yar Tikhiy <yar@comp.chem.msu.su>
* (general) Add support for passive-interface default (with
minor edits by Paul Jakma).
* ospf_interface.h: Add OSPF_IF_PASSIVE_STATUS macro, looking
at configured value, or the global 'default' value, as
required.
* ospf_interface.c: (ospf_if_new_hook) Leave passive
unconfigured per default, allowing global 'default' to
take effect for unconfigured interfaces.
* ospf_packet.c: (various) use OSPF_IF_PASSIVE_STATUS
* ospf_vty.c: (ospf_passive_interface_default) new function,
unset passive from all interfaces if default is enabled, as
the per-iface settings become redundant.
(ospf_passive_interface_update) new func, update passive
setting taking global default into account.
({no,}ospf_passive_interface_addr_cmd) Add support for
'default' variant of command.
(show_ip_ospf_interface_sub) Update to take global
default into account when printing passive status.
(ospf_config_write) ditto.
* ospfd.c: (ospf_new) set global passive-interface default.
* ospfd.h: (struct ospf) Add field for global
passive-interface.
|
|
2006-08-27 J.J. Krabbendam <jkrabbendam@aimsys.nl>
* ospfd.c: (ospf_finish_final) default redistribute should be
unset too, fixes bug where reconfiguring ospfd completely
can no longer enable default redistribution.
|
|
2006-08-25 Paul Jakma <paul.jakma@sun.com>
* (general) Bug #134. Be more robust to backward time changes,
use the newly added libzebra time functions.
In most cases: recent_time -> recent_relative_time()
gettimeofday -> quagga_gettime (QUAGGA_CLK_MONOTONIC, ..)
time -> quagga_time.
(ospf_make_md5_digest) time() call deliberately not changed.
(ospf_external_lsa_refresh) remove useless gettimeofday, LSA
tv_orig time was already set in ospf_lsa_new, called via
ospf_external_lsa_new.
|
|
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospfd.c: (ospf_router_id_update) Fix and document the algorithm for
selecting the router ID: if there is not a statically configured ID,
then stick to the most recent value to avoid disruptive changes.
This should fix bug #288.
|
|
2006-07-26 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.{c,h}: (ospf_lsa_unlock) Change to take a double pointer
to the LSA to be 'unlocked', so that, if the LSA is freed, the
callers pointer to the LSA can be NULLed out, allowing any further
use of that pointer to provoke a crash sooner rather than later.
* ospf_*.c: (general) Adjust callers of ospf_lsa_unlock to match
previous. Try annotate 'locking' somewhat to show which 'locks'
are protecting what LSA reference, if not obvious.
* ospf_opaque.c: (ospf_opaque_lsa_install) Trivial: remove useless
goto, replace with return.
* ospf_packet.c: (ospf_make_ls_ack) Trivial: merge two list loops,
the dual-loop predated the delete-safe list-loop macro.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_default_originate_timer) Let the thread
take (struct ospf *) as thread argument, rather than (struct
ospf *)->default_originate, thus avoiding having to call
ospf_lookup.
* ospf_zebra.c: (ospf_redistribute_default_set) change setup
of ospf_default_originate_timer thread to match.
* ospfd.c: (ospf_router_id_update) ditto.
|
|
2006-01-10 Len Sorensen <lennartsorensen@ruggedcom.com>
* (general) Bug #234, see also [quagga-dev 3902].
Fix problem with nbr_self not being properly reinitialised
when an interface comes up, after having been down.
Some re-arrangement done by Paul Jakma, any bugs introduced
on top of Len's suggested changes are his.
* ospf_neighbor.c: (ospf_nbr_add_self) centralise
initialisation of nbr_self parameters here.
* ospf_interface.c: (ospf_if_new) deleting initialisation of
parameters of nbr_self, just rely on call to
ospf_nbr_add_self.
(ospf_if_cleanup) ditto.
* ospfd.c: (ospf_network_run) ditto.
|
|
2006-01-10 Paul Jakma <paul.jakma@sun.com>
* ospfd.c: (ospf_network_run) checking to see if router-id
is set should be on ospf->router_id, not router_id_static.
This was causing ospfd to not start if router-id had not
been configured statically.
(ospf_if_update) ditto.
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* (general) s/graceful/deferred/ in all files, the former term
is confusing wrt OSPF Graceful-Restart.
* ospfd.c: (ospf_deferred_shutdown_check) dont return
a function which returns void. SOS complains about this.
(ospf_finish)
|
|
* ospfd.h: remove the OSPF_ROUTER_ID_UPDATE_DELAY define
(struct ospf) remove the router_id timer thread.
remove export of ospf_router_id_update_timer.
* ospfd.c: (ospf_router_id_update) call ospf_if_update to
poke interfaces into action after ID has been configured.
(ospf_router_id_update_timer) removed.
(ospf_finish_final) t_router_id_update timer is gone.
(ospf_network_run) router-id update timer gone.
call ospf_router_id_update directly if ID not configured.
In the per-iface loop, don't ospf_if_up interfaces if
ID is still not configured. The update function will call
ospf_if_update anyway.
(ospf_if_update) ID update timer is gone. Just return if no
ID is set.
* ospf_vty.c: (ospf_router_id) call ospf_router_id_update, no
timer needed.
* ospf_zebra.c: (ospf_router_id_update_zebra) call
ospf_router_id_update directly, not via timer.
|
|
2005-11-14 Paul Jakma <paul.jakma@sun.com>
* ospfd.c: (ospf_new) stub-shutdown should just default to
unconfigured, too strange otherwise.
(ospf_finish_final) t_opaque_lsa_self TIMER_OFF should be
preprocessor conditional on HAVE_OPAQUE_LSA.
* ospfd.h: (struct ospf) remove the SHUTDOWN_DEFAULT define.
no longer used, plus it wasn't in range that the command
accepted.
* ospf_zebra.h: Depends on vty.h, include it.
|
|
* (general) RFC3137 stub-router support
* ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define.
(struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for
options, to allow shutdown to distinguish between complete
shutdown and shutdown of a subset of ospf instances.
(struct ospf)
Add stub_router_{startup,shutdown_}time, configuration of startup
and shutdown time for stub-router.
Add t_graceful_shutdown struct thread, timer for graceful
shutdown, if needed.
(struct ospf_area) Add stub_router_state - run time state of
stub-router for an area. Add flags for ADMIN, IS and WAS
states.
Add t_stub_router, timer thread to resend router-lsa for an
area.
* ospf_lsa.c: (ospf_link_cost) new simple function to spit out
either the given lnks cost or infinite cost if stub-router is
in effect.
(lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use
previous function for transit-links.
(ospf_stub_router_timer) timer thread for end of startup stub
router. Change state as required for the area and setup
re-origination of router-lsa.
(ospf_stub_router_check) Check/do whether stub-router should be
enabled, and whether it requires timer to be setup.
(ospf_router_lsa_new) call previous function at top.
(ospf_router_lsa_originate) no external callers, made static.
* ospf_lsa.h: (ospf_router_lsa_originate) removed.
* ospf_main.c: (sigint) make static.
remove call to exit, as ospf_terminate now deals with
exiting.
* ospf_route.c: (ospf_terminate) removed, now in ospfd.c.
* ospf_vty.c: (show_ip_ospf_area) print out state of
stub-router, if active.
(show_ip_ospf) print out configuration of stub-router
support, and details of graceful-shutdown if the timer is
active.
((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new
commands to (de-)?configure stub-router support.
(config_write_stub_router) write out config of stub-router.
(ospf_config_write) call previous.
(ospf_vty_init) install the new stub-router commands.
* ospfd.c: various functions made static.
(ospf_new) Set defaults for stub-router. Graceful shutdown
is made to default on, just to be adventerous.
(ospf_graceful_shutdown_finish) new function, final part of
shutdown.
(ospf_graceful_shutdown_timer) timer thread wrapper for
graceful-shutdown.
(ospf_graceful_shutdown_check) check whether to setup timer
for shutdown or proceed directly to final shutdown.
(ospf_terminate) moved here from ospf_route.c, call
ospf_finish for each instance.
(ospf_finish) renamed to ospf_finish_final and made static.
(ospf_finish) new function, exported wrapper around
ospf_graceful_shutdown_check.
(ospf_finish_final) complete shutdown of an instance.
Add missing TIMER_OFF's of two timer threads.
(ospf_area_free) opaque self lsa timer should be turned off.
|
|
* (general) SPF millisecond resolution timer with adaptive,
linear back-off holdtime. Prettification of ospf_timer_dump.
* ospf_dump.c: (ospf_timeval_dump) new function. The guts of
ospf_timer_dump, but made to be more dynamic in printing out
the relative timeval, sliding the precision printed out
according to the value.
(ospf_timer_dump) guts moved to ospf_timeval_dump.
* ospf_dump.h: export ospf_timeval_dump.
* ospf_flood.c: (ospf_flood) remove gettimeofday, use
the libzebra exported recent_time instead, as it's not
terribly critical to have time exactly right - the dropped
LSA will be retransmited to us if we don't ACK it.
* ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're
not transmitting, just putting LSA back on update transmit list.
* ospfd.h: delay and holdtimes should be unsigned.
Add spf_max_holdtime and spf_hold_multiplier.
Update default defines for delay and hold time to be in msec.
(struct ospf) change the SPF timestamp to a struct timeval.
Remove ospf_timers_spf_(un)?set.
* ospfd.c: (ospf_timers_spf_{set,unset}) removed.
(ospf_new) initialise spf_max_holdtime and spf_hold_multiplier
* ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval
now, update with gettimeofday.
(ospf_spf_calculate_schedule) Change SPF timers to millisecond
resolution.
Make the holdtime be adaptive, with a linear increase in
holdtime ever consecutive SPF run which occurs within holdtime
of previous SPF, bounded by spf_max_holdtime.
* ospf_vty.c: Update spf timers commands.
(ospf_timers_spf_set) trivial helper.
(ospf_timers_throttle_spf_cmd) new command to set SPF delay,
initial hold and max hold times with millisecond resolution.
(ospf_timers_spf_cmd) Deprecated. Accept the old values,
convert to msec, truncate to new limits.
(no_ospf_timers_throttle_spf_cmd) set timers to defaults.
(no_ospf_timers_spf_cmd) deprecated form, same as previous.
(show_ip_ospf_cmd) Display SPF parameters and times.
(show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne'
header.
(show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of
the multiple spaces which were making the lines even longer.
(show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header
(show_ip_ospf_neighbor_all_cmd) ditto and fix the field
widths for NBMA neighbours.
(show_ip_ospf_neighbor_int) Use header function.
(show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf,
local array - safer.
(show_ip_ospf_neighbor_detail_sub) ditto
(ospf_vty_init) install the new SPF throttle timer commands.
|
|
* ospf_lsa.h: (ospf_external_lsa_flush) Comment out the 5th argument
(nexthop) since it is not used in the function (except inside
some commented-out code).
* ospf_lsa.c: (ospf_external_lsa_flush,ospf_external_lsa_refresh)
Comment out the 5th argument to ospf_external_lsa_flush.
* ospf_asbr.c: (ospf_redistribute_withdraw) Comment out 5th arg
to ospf_external_lsa_flush.
* ospf_vty.c: (no_ospf_default_information_originate) Eliminate 5th
uninitialized nexthop arg to ospf_external_lsa_flush.
* ospf_zebra.c: (ospf_zebra_read_ipv4) Comment out 5th arg
to ospf_external_lsa_flush.
* ospfd.c: (ospf_network_set) Comment out 5th arg
to ospf_external_lsa_flush.
|
|
* ospfd.h: add OSPF_ABR_DEFAULT for convenience, make
OSPF_ABR_CISCO be the default ABR type.
* ospfd.c: (ospf_new) initialise abr_type to OSPF_ABR_DEFAULT
* ospf_vty.c: (no_ospf_abr_type_cmd) add standard as a negatable
abr_type. default abr_type should be OSPF_ABR_DEFAULT.
(ospf_config_write) test whether default abr_type against
OSPF_ABR_DEFAULT, rather than any specific ABR_TYPE.
|
|
* (general) extern and static qualifiers added.
unspecified arguments in definitions fixed, typically they should
be 'void'.
function casts added for callbacks.
Guards added to headers which lacked them.
Proper headers included rather than relying on incomplete
definitions.
gcc noreturn function attribute where appropriate.
* ospf_opaque.c: remove the private definition of ospf_lsa's
ospf_lsa_refresh_delay.
* ospf_lsa.h: export ospf_lsa_refresh_delay
* ospf_packet.c: (ospf_make_md5_digest) make *auth_key const,
correct thing to do - removes need for the casts later.
* ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's
home-brewed versions, shuts up several warnings.
* ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and
VTY_GET_IPV4_PREFIX moved to lib/vty.h.
* ospf_zebra.c: (ospf_distribute_list_update_timer) hacky
overloading of the THREAD_ARG pointer should at least use
uintptr_t.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* ospfd.h: Add new field struct stream *ibuf to struct ospf.
* ospfd.c: (ospf_new) Check return code from ospf_sock_init.
Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1).
(ospf_finish) Call stream_free(ospf->ibuf.
* ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then
pass it to ospf_recv_packet for use in receiving the packet
(instead of allocating a new stream for each packet received).
Eliminate all calls to stream_free(ibuf).
(ospf_recv_packet) The struct stream *ibuf is now passed in as
an argument. No need to use recvfrom to peek at the packet
header (to see how big it is), just use ospf->ibuf which is
always large enough (this eliminates a system call to recvfrom).
Therefore, no need to allocate a stream just for this packet,
and no need to free it when done.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* ospfd.c: (ospf_network_match_iface) revert to previous network
statement match behaviour.
|
|
ripd might need some more testing though.
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
|
|
|
|
|
|
used in route-map used to filter redistributions.
* Move ospf_prefix_list_update() function from ospfd.c to ospf_zebra.c.
|
|
|
|
while trying not to change semantics. Add ifdefed-out code to
avoid matching ppp interfaces whose destination address does not
also match the prefix under consideration, to help out people with
problems due to as-yet-unfixed bugs with p2p interfaces coming and
going.
|
|
* ospfd/ospfd.c: if_is_pointopoint() takes (struct interface *), was
being called with struct connected. Change to co->ifp.
|
|
* ospfd/ospfd.c: Do not increment act_int for an area, as it is done
by ospf_ism.c::ism_change_state() - results in incorrect figure
for active interfaces in an area.
|
|
* zebra/connected.c: revert the 'generic PtP' patch as it causes
far too many problems. People who use FreeSWAN should investigate
native linux ipsec.
* zebra/rt_netlink.c: ditto
* lib/if.c: ditto
* ripd/ripd.h: ditto
* ripd/ripd.c: ditto
* ripd/rip_interface.c: ditto
* ospfd/ospfd.c: ditto
* ospfd/ospf_snmp.c: ditto
* bgpd/bgp_nexthop.c: ditto
|
|
* bgpd/bgp_routemap.c: attr->med is type u_in32_t, should be
compared with UINT32_MAX
* ospfd/ospfd.c: remove redundant assert
* zebra/rtadv.c: add missing include for zebra/rib.h
|
|
* (global): Add/fixup NSSA ABR translation functionality
* ospfd.h: Adjust the NSSA ROLE defines. Rename STATE to TRANSLATE.
Rename the LSA_NSSA_GET define to LSA_OPTIONS_NSSA_GET.
* ospfd.c: Adjust to match changes to ospfd.h
* ospf_te.c: Adjust to match change to LSA_NSSA_GET.
* ospf_lsa.h: slights reformatting.
Add new NSSA functions, ospf_translated_nssa_compare() (not
currently used), ospf_translated_nssa_refresh() and
ospf_translated_nssa_originate().
* ospf_lsa.c: Implemented aforementioned new functions. Fix up
several NSSA hooks to /not/ be called for Type-5s which are
translated. Add additional hooks. Set the ROUTER_LSA_NT bit in
router-lsa flags if ABR does translation. New function,
ospf_lsa_translated_nssa_new() implemented. Dont register
translated LSAs for refreshing - instead we implicitly rely on
the ASBR refreshing the Type-7, and refresh the translated Type-5
at the same time. Some minor reformatting. Extra debug info added.
Also, existing debug statements modified to report LSA Id.
* ospf_flood.c: call ospf_translated_nssa_refresh() when refreshing
Type-7. minor reformatting.
* ospf_dump.c: Dump NSSA LSAs.
* ospf_asbr.h: slight reformatting. Export
ospf_external_route_lookup() (though, not used. probably will
undo this).
* ospf_abr.c: Slight reformatting in many places. Update to match
ospfd.h changes.
(ospf_abr_translate_nssa): make it work, using the new ospf_lsa
translation functions.
(Several places): change struct prefix * to struct prefix_ipv4 *.
(might as well do the casts at higher levels). Add more debug
info.
(ospf_abr_announce_stub_defaults): announce default to NSSA areas
too.
(ospf_abr_announce_nssa_defaults): do nothing. this function
probably should die. (see ospf_abr_announce_stub_defaults).
(ospf_abr_task_timer): run NSSA tasks.
|
|
* ospfd.c (ospf_area_nssa_set): Set defaults for NSSA Role, State
and Stability Interval and no_summary.
(ospf_area_nssa_translator_role_(un?)set): Update to
NSSATranslatorRole
|
|
* Merge of zebra privileges
|
|
Subject: [zebra 17365] [PATCH] Ospf area id's DECIMAL -> ADDRESS
It was annoying for me to view area id's like 335544330 (20.0.0.10 in
address format) in configuration. Most of other network devices are
using address-like id's and so does zebra when using "show ip ospf *"
commands.
You can still enter id's in decimal format, but they are just shown in
address format.
|
|
|
