| Age | Commit message (Collapse) | Author |
|---|
|
|
|
2006-10-22 Yar Tikhiy <yar@comp.chem.msu.su>
* (general) Add support for passive-interface default (with
minor edits by Paul Jakma).
* ospf_interface.h: Add OSPF_IF_PASSIVE_STATUS macro, looking
at configured value, or the global 'default' value, as
required.
* ospf_interface.c: (ospf_if_new_hook) Leave passive
unconfigured per default, allowing global 'default' to
take effect for unconfigured interfaces.
* ospf_packet.c: (various) use OSPF_IF_PASSIVE_STATUS
* ospf_vty.c: (ospf_passive_interface_default) new function,
unset passive from all interfaces if default is enabled, as
the per-iface settings become redundant.
(ospf_passive_interface_update) new func, update passive
setting taking global default into account.
({no,}ospf_passive_interface_addr_cmd) Add support for
'default' variant of command.
(show_ip_ospf_interface_sub) Update to take global
default into account when printing passive status.
(ospf_config_write) ditto.
* ospfd.c: (ospf_new) set global passive-interface default.
* ospfd.h: (struct ospf) Add field for global
passive-interface.
|
|
2006-06-28 Erik Muller <erikm@internap.com>
* ospfd.h: Define 2 new struct ospf config flags:
OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL
* ospf_nsm.c (nsm_change_state): Log adjacency changes if
requested.
* ospf_vty.c (ospf_log_adjacency_changes): New command function
to implement ospf subcommand "log-adjacency-changes [detail]".
(no_ospf_log_adjacency_changes) Turn off log-adjacency-changes.
(show_ip_ospf) Show whether adjacency changes are logged.
(ospf_config_write) Add "log-adjacency-changes [detail]" to config.
(ospf_vty_init) Add ospf_log_adjacency_changes and
no_ospf_log_adjacency_changes.
* ospfd.texi: Document new ospf router subcommand
"log-adjacency-changes [detail]".
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* (general) s/graceful/deferred/ in all files, the former term
is confusing wrt OSPF Graceful-Restart.
* ospfd.c: (ospf_deferred_shutdown_check) dont return
a function which returns void. SOS complains about this.
(ospf_finish)
|
|
* ospfd.h: remove the OSPF_ROUTER_ID_UPDATE_DELAY define
(struct ospf) remove the router_id timer thread.
remove export of ospf_router_id_update_timer.
* ospfd.c: (ospf_router_id_update) call ospf_if_update to
poke interfaces into action after ID has been configured.
(ospf_router_id_update_timer) removed.
(ospf_finish_final) t_router_id_update timer is gone.
(ospf_network_run) router-id update timer gone.
call ospf_router_id_update directly if ID not configured.
In the per-iface loop, don't ospf_if_up interfaces if
ID is still not configured. The update function will call
ospf_if_update anyway.
(ospf_if_update) ID update timer is gone. Just return if no
ID is set.
* ospf_vty.c: (ospf_router_id) call ospf_router_id_update, no
timer needed.
* ospf_zebra.c: (ospf_router_id_update_zebra) call
ospf_router_id_update directly, not via timer.
|
|
2005-11-14 Paul Jakma <paul.jakma@sun.com>
* ospfd.c: (ospf_new) stub-shutdown should just default to
unconfigured, too strange otherwise.
(ospf_finish_final) t_opaque_lsa_self TIMER_OFF should be
preprocessor conditional on HAVE_OPAQUE_LSA.
* ospfd.h: (struct ospf) remove the SHUTDOWN_DEFAULT define.
no longer used, plus it wasn't in range that the command
accepted.
* ospf_zebra.h: Depends on vty.h, include it.
|
|
* (general) RFC3137 stub-router support
* ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define.
(struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for
options, to allow shutdown to distinguish between complete
shutdown and shutdown of a subset of ospf instances.
(struct ospf)
Add stub_router_{startup,shutdown_}time, configuration of startup
and shutdown time for stub-router.
Add t_graceful_shutdown struct thread, timer for graceful
shutdown, if needed.
(struct ospf_area) Add stub_router_state - run time state of
stub-router for an area. Add flags for ADMIN, IS and WAS
states.
Add t_stub_router, timer thread to resend router-lsa for an
area.
* ospf_lsa.c: (ospf_link_cost) new simple function to spit out
either the given lnks cost or infinite cost if stub-router is
in effect.
(lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use
previous function for transit-links.
(ospf_stub_router_timer) timer thread for end of startup stub
router. Change state as required for the area and setup
re-origination of router-lsa.
(ospf_stub_router_check) Check/do whether stub-router should be
enabled, and whether it requires timer to be setup.
(ospf_router_lsa_new) call previous function at top.
(ospf_router_lsa_originate) no external callers, made static.
* ospf_lsa.h: (ospf_router_lsa_originate) removed.
* ospf_main.c: (sigint) make static.
remove call to exit, as ospf_terminate now deals with
exiting.
* ospf_route.c: (ospf_terminate) removed, now in ospfd.c.
* ospf_vty.c: (show_ip_ospf_area) print out state of
stub-router, if active.
(show_ip_ospf) print out configuration of stub-router
support, and details of graceful-shutdown if the timer is
active.
((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new
commands to (de-)?configure stub-router support.
(config_write_stub_router) write out config of stub-router.
(ospf_config_write) call previous.
(ospf_vty_init) install the new stub-router commands.
* ospfd.c: various functions made static.
(ospf_new) Set defaults for stub-router. Graceful shutdown
is made to default on, just to be adventerous.
(ospf_graceful_shutdown_finish) new function, final part of
shutdown.
(ospf_graceful_shutdown_timer) timer thread wrapper for
graceful-shutdown.
(ospf_graceful_shutdown_check) check whether to setup timer
for shutdown or proceed directly to final shutdown.
(ospf_terminate) moved here from ospf_route.c, call
ospf_finish for each instance.
(ospf_finish) renamed to ospf_finish_final and made static.
(ospf_finish) new function, exported wrapper around
ospf_graceful_shutdown_check.
(ospf_finish_final) complete shutdown of an instance.
Add missing TIMER_OFF's of two timer threads.
(ospf_area_free) opaque self lsa timer should be turned off.
|
|
* (general) SPF millisecond resolution timer with adaptive,
linear back-off holdtime. Prettification of ospf_timer_dump.
* ospf_dump.c: (ospf_timeval_dump) new function. The guts of
ospf_timer_dump, but made to be more dynamic in printing out
the relative timeval, sliding the precision printed out
according to the value.
(ospf_timer_dump) guts moved to ospf_timeval_dump.
* ospf_dump.h: export ospf_timeval_dump.
* ospf_flood.c: (ospf_flood) remove gettimeofday, use
the libzebra exported recent_time instead, as it's not
terribly critical to have time exactly right - the dropped
LSA will be retransmited to us if we don't ACK it.
* ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're
not transmitting, just putting LSA back on update transmit list.
* ospfd.h: delay and holdtimes should be unsigned.
Add spf_max_holdtime and spf_hold_multiplier.
Update default defines for delay and hold time to be in msec.
(struct ospf) change the SPF timestamp to a struct timeval.
Remove ospf_timers_spf_(un)?set.
* ospfd.c: (ospf_timers_spf_{set,unset}) removed.
(ospf_new) initialise spf_max_holdtime and spf_hold_multiplier
* ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval
now, update with gettimeofday.
(ospf_spf_calculate_schedule) Change SPF timers to millisecond
resolution.
Make the holdtime be adaptive, with a linear increase in
holdtime ever consecutive SPF run which occurs within holdtime
of previous SPF, bounded by spf_max_holdtime.
* ospf_vty.c: Update spf timers commands.
(ospf_timers_spf_set) trivial helper.
(ospf_timers_throttle_spf_cmd) new command to set SPF delay,
initial hold and max hold times with millisecond resolution.
(ospf_timers_spf_cmd) Deprecated. Accept the old values,
convert to msec, truncate to new limits.
(no_ospf_timers_throttle_spf_cmd) set timers to defaults.
(no_ospf_timers_spf_cmd) deprecated form, same as previous.
(show_ip_ospf_cmd) Display SPF parameters and times.
(show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne'
header.
(show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of
the multiple spaces which were making the lines even longer.
(show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header
(show_ip_ospf_neighbor_all_cmd) ditto and fix the field
widths for NBMA neighbours.
(show_ip_ospf_neighbor_int) Use header function.
(show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf,
local array - safer.
(show_ip_ospf_neighbor_detail_sub) ditto
(ospf_vty_init) install the new SPF throttle timer commands.
|
|
* (general) OSPF fast, sub-second hello and 1s dead-interval
support. A warning fix. Millisec support for ospf_timer_dump.
Change auto-cost ref-bandwidth to add a comment to write out
of config, rather than printing annoying messages to vty on
startup.
* ospf_dump.c: (ospf_timer_dump) Print out milliseconds too.
Callers typically specify a length of 9, so most see
millisecs unless they specify the additional length.
* ospf_interface.h: (struct ospf_interface) new interface param,
fast_hello.
* ospf_interface.c: (ospf_if_table_lookup) add brackets,
gcc warning fix.
(ospf_new_if_params) Initialise fast_hello param.
(ospf_free_if_params) Check whether fast_hello is configured.
(ospf_if_new_hook) set fast_hello to default.
* ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to
prevent funny side-effects from its if statement when this
macro is used conditionally by other macros.
(OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds.
(OSPF_HELLO_TIMER_ON) new macro to set hello timer according
to whether fast_hello is set.
* ospf_ism.c: Update all setting of the hello timer to use
either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The
former is used when hello is to be sent immediately.
* ospf_nsm.c: ditto
* ospf_packet.c: (ospf_hello) hello-interval is not checked
for mismatch if fast_hello is set.
(ospf_read) Annoying nit, fix "no ospf_interface" to be debug
rather than a warning, as it can be perfectly normal to
receive packets when logical subnets are used.
(ospf_make_hello) Set hello-interval to 0 if fast-hellos are
configured.
* ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying
nit, don't vty_out if this command is given, it gets tired
quick.
(show_ip_ospf_interface_sub) Print the hello-interval
according to whether fast-hello is set or not.
Print the extra 5 millisec characters from (ospf_timer_dump)
if fast-hello is configured.
(ospf_vty_dead_interval_set) new function, common to all
forms of dead-interval command, to set dead-interval and
fast-hello correctly. If a dead-interval is given, unset
fast-hello, else if a hello-multiplier is set, set
dead-interval to 1 and fast-hello to given multiplier.
(ip_ospf_dead_interval_addr_cmd) use
ospf_vty_dead_interval_set().
(ip_ospf_dead_interval_minimal_addr_cmd) ditto.
(no_ip_ospf_dead_interval) Unset fast-hello.
(no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval
should set it to OSPF_HELLO_INTERVAL_DEFAULT, not
OSPF_ROUTER_DEAD_INTERVAL_DEFAULT.
(config_write_interface) Write out fast-hello.
(ospf_config_write) Write a comment about
"auto-cost reference-bandwidth" having to be equal on all
routers. Hopefully just as noticeable as old practice of
writing to vty, but less annoying.
(ospf_vty_if_init) install the two new dead-interval
commands.
* ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL
and OSPF_FAST_HELLO_DEFAULT.
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever
cost is changed ( [no] ip ospf area XXX default-cost YYY)
Support ignore-mtu option
* ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT
* ospfd/ospf_packet.c: support ignore-mtu option
* ospfd/ospf_interface.h: field added for skipping MTU check
* ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete()
Set mtu_ignore field to default value
* ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area()
* ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP
correct values
* ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next()
convert OSPFIFSTATE internal status into SNMP values
|
|
* ospfd.h: add OSPF_ABR_DEFAULT for convenience, make
OSPF_ABR_CISCO be the default ABR type.
* ospfd.c: (ospf_new) initialise abr_type to OSPF_ABR_DEFAULT
* ospf_vty.c: (no_ospf_abr_type_cmd) add standard as a negatable
abr_type. default abr_type should be OSPF_ABR_DEFAULT.
(ospf_config_write) test whether default abr_type against
OSPF_ABR_DEFAULT, rather than any specific ABR_TYPE.
|
|
* (general) extern and static qualifiers added.
unspecified arguments in definitions fixed, typically they should
be 'void'.
function casts added for callbacks.
Guards added to headers which lacked them.
Proper headers included rather than relying on incomplete
definitions.
gcc noreturn function attribute where appropriate.
* ospf_opaque.c: remove the private definition of ospf_lsa's
ospf_lsa_refresh_delay.
* ospf_lsa.h: export ospf_lsa_refresh_delay
* ospf_packet.c: (ospf_make_md5_digest) make *auth_key const,
correct thing to do - removes need for the casts later.
* ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's
home-brewed versions, shuts up several warnings.
* ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and
VTY_GET_IPV4_PREFIX moved to lib/vty.h.
* ospf_zebra.c: (ospf_distribute_list_update_timer) hacky
overloading of the THREAD_ARG pointer should at least use
uintptr_t.
|
|
[backport candidate]
|
|
* ospfd.h: Add new field struct stream *ibuf to struct ospf.
* ospfd.c: (ospf_new) Check return code from ospf_sock_init.
Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1).
(ospf_finish) Call stream_free(ospf->ibuf.
* ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then
pass it to ospf_recv_packet for use in receiving the packet
(instead of allocating a new stream for each packet received).
Eliminate all calls to stream_free(ibuf).
(ospf_recv_packet) The struct stream *ibuf is now passed in as
an argument. No need to use recvfrom to peek at the packet
header (to see how big it is), just use ospf->ibuf which is
always large enough (this eliminates a system call to recvfrom).
Therefore, no need to allocate a stream just for this packet,
and no need to free it when done.
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
|
|
|
|
* (global): Add/fixup NSSA ABR translation functionality
* ospfd.h: Adjust the NSSA ROLE defines. Rename STATE to TRANSLATE.
Rename the LSA_NSSA_GET define to LSA_OPTIONS_NSSA_GET.
* ospfd.c: Adjust to match changes to ospfd.h
* ospf_te.c: Adjust to match change to LSA_NSSA_GET.
* ospf_lsa.h: slights reformatting.
Add new NSSA functions, ospf_translated_nssa_compare() (not
currently used), ospf_translated_nssa_refresh() and
ospf_translated_nssa_originate().
* ospf_lsa.c: Implemented aforementioned new functions. Fix up
several NSSA hooks to /not/ be called for Type-5s which are
translated. Add additional hooks. Set the ROUTER_LSA_NT bit in
router-lsa flags if ABR does translation. New function,
ospf_lsa_translated_nssa_new() implemented. Dont register
translated LSAs for refreshing - instead we implicitly rely on
the ASBR refreshing the Type-7, and refresh the translated Type-5
at the same time. Some minor reformatting. Extra debug info added.
Also, existing debug statements modified to report LSA Id.
* ospf_flood.c: call ospf_translated_nssa_refresh() when refreshing
Type-7. minor reformatting.
* ospf_dump.c: Dump NSSA LSAs.
* ospf_asbr.h: slight reformatting. Export
ospf_external_route_lookup() (though, not used. probably will
undo this).
* ospf_abr.c: Slight reformatting in many places. Update to match
ospfd.h changes.
(ospf_abr_translate_nssa): make it work, using the new ospf_lsa
translation functions.
(Several places): change struct prefix * to struct prefix_ipv4 *.
(might as well do the casts at higher levels). Add more debug
info.
(ospf_abr_announce_stub_defaults): announce default to NSSA areas
too.
(ospf_abr_announce_nssa_defaults): do nothing. this function
probably should die. (see ospf_abr_announce_stub_defaults).
(ospf_abr_task_timer): run NSSA tasks.
|
|
* ospfd.h (struct ospf_area): remove NSSATranslator. Add
NSSATranslatorState and NSSATranslatorStabilityInterval (currently
not used).
(global): add OSPF_NSSA_TRANS_STABLE_DEFAULT, default for
NSSATranslatorStabilityInterval. Update the LSA_NSSA_GET to
reflect struct ospf_area changes.
|
|
the class of machines which zebra runs on than the original defaults which
were taken from IOS (and even IOS uses much lower times these days). Lower
values greatly help with convergence.
Ideally, we'd use even lower times, but thread_add_timer() api will need to
be modified to use milliseconds. (eg JunOS uses 100ms for delay, and 700ms
for hold time, iirc from Hasso).
|
|
moved definition of the various socket paths from the
per daemon header files into configure.ac. it will set the paths to
be in the directory specified by --localstatedir=<prefix> or
otherwise will try to guess as best it can ( a la pid file path
detection - which probably should try reference ${prefix} too).
the present hardcoded socket path, /tmp, isnt really correct. should
be in /var somewhere really.
|
|
* Sync to Zebra CVS
* Fix lib/thread.h leak
* Fix small Opaque LSA leak
* Do not configure OSPF interfaces for secondary addresses
* vtysh fixes from Hasso
* Dave Watson's missing ntohs fix
|
|
* sync to latest zebra CVS
* spec file: updated and added define for ospf-api/client
NB: OSPF-API has been broken by the zebra.org changes, which
has added struct ospf * as a new arg to many functions
|
|
[zebra 17352] ospf network matching (aka need for peer /32 for PtP)
change behaviour of network <prefix> area N statement wrt to PtP.
|
|
|
