| Age | Commit message (Collapse) | Author |
|---|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message
from LOG_NOTICE to LOG_DEBUG.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
* ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning
message and in comment.
(ospf_db_desc) Warning message that a packet is being discarded
should give the router id of the packet source. Fix spelling
of packet in two warning messages.
(ospf_ls_req) Warning message that a link state request is being
discarded should give the router id of the neighbor that sent it.
|
|
* debug.[ch]: Remove unused files.
* Makefile.am: Remove references to debug.c and debug.h
* ospf_main.c: Remove #include "debug.h" (was not being used, and
lib/debug.h has now been deleted).
|
|
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
|
|
in lib/zebra.h, ensure that RFC3542-required CMSG_SPACE and CMSG_LEN
are defined. Warn if alignment assumptions are made, since they are
i386-centric.
in lib/sockopt.h, declare that sockopt sizes are without
CMSG_SPACE-required padding - just simple sizeof.
in ospfd/ospf_packet.c, simply use CMSG_SPACE
This should remove all instances of CMSG_ALIGN from the source code.
This is a nonstandard, though rational, construct; quagga should use
only those defines in RFC3542.
|
|
* ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock.
|
|
* ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to
ignore stub area summary default. Even so it seems a strange
check, add a comment to that effect.
|
|
|
|
* ospfd.c: (ospf_network_match_iface) revert to previous network
statement match behaviour.
|
|
* ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points
to it. Add convenience pointer to msg->msg_iov[1], and use this,
fixing the unfortunate borkenness introduced in moving of this code
to a function.
(ospf_write) remove iovp and fix up call to previous.
(ospf_ls_upd_packet_new) cast size to long int - unfortunately
glibc's size_t format modifier is not portable.
|
|
with CVS trees.
|
|
* ospf_packet.c: (ospf_ls_upd_packet_new) Format for size_t should
be ld.
* ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of
THREAD_ARG to store an integer, but it should at least use same
same type to retrieve the value. Assert value is sane.
|
|
* ospf_packet.c: (ospf_write_frags) Add debug output
(ospf_write) set type early, so we can pass it to
ospf_write_frags.
(ospf_ls_upd_packet_new) print size in debug output when too large
packet is encountered.
|
|
|
|
* ospfd/ospf_packet.c: setsockopt_pktinfo -> setsockopt_ifindex
* zebra/irdp_main.c: ditto
|
|
* ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex()
function.
* ospf_packet.c: (ospf_read) manually look up ifindex
if system could not have returned one, eg openbsd.
|
|
ripd might need some more testing though.
|
|
initializes connection, and "no smux peer" command terminates it. Fixes
bugzilla #47 and #112.
|
|
reducing various configure options.
|
|
|
|
|
|
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
|
|
* ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order
remove ntohs that should have dissappeared. Take struct ip
as argument, caller has to know there's an IP header at start of
stream anyway.
* ospf_dump.h: update declaration of ospf_ip_header_dump.
* ospf_packet.c: (ospf_write) correct call to
sockopt_iphdrincl_swab_htosys which was munging the header.
(ospf_recv_packet) ip_len is needed for old OpenBSD fixup.
(ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as
we have it.
|
|
|
|
* ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't
use of variable names 'node' and 'nextnode' to avoid possible
conflict with list macros. Move variable declaration inside for
loop after a statement to top of function.
|
|
* ospf_snmp.c: Missed list typedef update
* ospf_dump.c: Include sockopt.h for header swab functions.
|
|
* ospf_packet.c: replace ospf_swap_iph_to... with
sockopt_iphdrincl_swab_...
|
|
|
|
* ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER
Apply to offset too. Print ip_cksum, lets not worry about
possible 2.0.37 compile problems.
* ospf_packet.c: (ospf_swap_iph_to{n,h}) Use
HAVE_IP_HDRINCL_BSD_ORDER.
(ospf_recv_packet) ditto.
(ospf_write) Fixup iov argument to ospf_write_frags.
|
|
* ospf_packet.c: (ospf_write) (struct msghdr).msg_name is caddr_t
on most platforms.
(ospf_recv_packet) ditto. And msg_flags is not always there
memset struct then set fields we care about rather than
initialise all fields individually.
|
|
|
|
* ospf_apiserver.{c,h}: (ospf_apiserver_term) loops calling
ospf_apiserver_free, which deletes referenced nodes from
apiserver_list, fixed.
|
|
|
|
* ospf_packet.c: (ospf_write) ifdef fragmentation support.
move actual fragmentation out to a new, similarly ifdefed, function.
(ospf_write_frags) fragmented write support, moved from previous.
|
|
* ospf_apiserver.{c,h}: lists typedef removal cleanup.
update some list loops to LIST_LOOP. some miscellaneous indent
fixups.
(ospf_apiserver_unregister_opaque_type) fix listnode_delete of
referenced node in loop.
* ospf_interface.h: lists typedef removal cleanup.
* ospf_opaque.{c,h}: lists typedef removal cleanup. update some list
loops to LIST_LOOP. miscellaneous style and indent fixups.
* ospf_te.{c,h}: ditto
* ospf_packet.c: lists typedef removal cleanup.
|
|
|
|
* ospf_packet.c: Fix bugzilla #107
(ospf_packet_max) get rid of the magic 88 constant
(ospf_swab_iph_ton) new function. set ip header to network order,
taking BSDisms into account.
(ospf_swab_iph_toh) the inverse.
(ospf_write) Add support for IP fragmentation, will only work on
linux though, other kernels make it impossible. get rid of the
magic 4 constant.
(ospf_make_ls_upd) Bound check to end of stream, not to
interface mtu.
(ospf_ls_upd_packet_new) New function, allocate upd packet
taking oversized LSAs into account.
(ospf_ls_upd_queue_send) use ospf_ls_upd_packet_new to allocate,
rather than statically allocating mtu sized packet buffer, which
actually was wrong - it didnt take ip header into account, which
should not be included in packet buffer.
(ospf_ls_upd_send_queue_event) minor tweaks and remove
TODO comment.
|
|
support of more significant changes not in this commit. The last item
in the ChangeLog below may be needed for p2mp to work correctly.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* hash.c (hash_iterate): Save next pointer before calling
procedure, so that iteration works even if the called procedure
deletes the hash backet.
* linklist.h (listtail): new macro, not yet used.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_spf.c (ospf_spf_calculate): Many more comments and debug
print statements. New function ospf_vertex_dump used in debugging.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_spf.h (struct vertex): Comments for flags and structure members.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_route.c: When finding an alternate route, log cost as well.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_interface.c (ospf_lookup_if_params): Initialize af in
struct prefix allocated on stack.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_packet.c (ospf_ls_ack_send_delayed): In p2mp mode, send
acks to AllSPFRouters, rather than All-DR.
|
|
|
|
|
|
* ospf_spf.c (ospf_nexthop_calculation): Initialize address family
in on-stack struct prefix_ipv4. Fixes point-to-multipoint SPF
calculation.
|
|
|
|
* ospf_packet.c (ospf_recv_packet): adjust size declaration of
buffer used to get interface index so that it compiles on other
than Linux and includes the required alignment space. Probably
this was only working on sparc/sparc64 because most of sockaddr_dl
was not being written.
|
