| Age | Commit message (Collapse) | Author |
|---|
|
* (show_ip_ospf_database_header) Fix unconditional NSSA-dependent
printf.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) undo fix suggested
Mikael Lonnroth. As per Kamatchi Soundaram /
[zebra 19590], original behaviour is correct.
|
|
* ospf_vty.c: (global) add, unused, description array for lsa flags.
(show_ip_ospf_database_header): pretty print options, printf hex
numbers as 0x, print lsa flags and note if it is a translated LSA.
(show_lsa_detail_proc): print out OSPF_LSA_LOCAL_XLT LSAs.
* ospf_packet.c: (ospf_write) print out destination IP in debug info
if write fails.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) clean up list node
and unlock lsa if we break early. (eg packet size too large).
|
|
* ospf_vty.c (ospf_area_stub_no_summary): fix typo.
(ospf_area_nssa_cmd_handler): new function to handle the
area.*nssa commands.
(ospf_area_nssa_cmd): changed to call ospf_area_nssa_cmd_handler
(ospf_area_nssa_translate_cmd) ditto
(ospf_area_nssa_translate_cmd): changed from ALIAS to defun, call
ospf_area_nssa_cmd_handler
(ospf_area_nssa_translate_no_summary_cmd): ditto
(no_ospf_area_nssa_cmd): call ospf_schedule_abr_task()
(show_ip_ospf_area): Formatting cleanups. Properly print out NSSA
area configuration.
show_router_lsa_detail: Add missing newline
(show_network_lsa_detail): ditto
(show_summary_lsa_detail): ditto
(show_summary_asbr_lsa_detail): ditto
(show_ip_ospf_route_router): fix spacing
(config_write_ospf_area): actually write out proper state for NSSA
area.
|
|
* ospf_abr.c (ospf_abr_nssa_am_elected): new function.
Look through LSDB for an area and try determine whether other
routers are more 'electable' than this router. Presumes caller
has checked Role.
(ospf_abr_nssa_check_status): new function. check any NSSA related
status changes. At present determines NSSATranslatorState should
be enabled or disabled.
(ospf_abr_announce_network_to_area): remove the redundant
call to ospf_abr_announce_network_to_area() (as per Vadim,
[zebra 14710], problem 7).
(global): Update NSSATranslator to NSSATranslatorState as per
ospfd.h changes
(ospf_abr_announce_nssa_defaults): call
ospf_abr_announce_network_to_area() to inject default summaries.
(ospf_abr_nssa_task): undo commented out calls to
ospf_abr_prepare_aggregates() and ospf_abr_send_nssa_aggregates(),
if they're borked, lets fix them.
(ospf_abr_task): remove call to ospf_abr_nssa_task() - move this
to the timer scheduler.
(ospf_abr_task_timer): call ospf_abr_nssa_task() and
ospf_abr_nssa_check_status()
(misc): some minor reformatting.
|
|
* ospfd.c (ospf_area_nssa_set): Set defaults for NSSA Role, State
and Stability Interval and no_summary.
(ospf_area_nssa_translator_role_(un?)set): Update to
NSSATranslatorRole
|
|
* ospfd.h (struct ospf_area): remove NSSATranslator. Add
NSSATranslatorState and NSSATranslatorStabilityInterval (currently
not used).
(global): add OSPF_NSSA_TRANS_STABLE_DEFAULT, default for
NSSATranslatorStabilityInterval. Update the LSA_NSSA_GET to
reflect struct ospf_area changes.
|
|
* ospf_route.c: delete routes generated from AS-External routes if
there is a inter/intra route. Adds ospf_route_delete_same_ext()
which prunes external routes, which is called from
ospf_route_install() when new route table is installed.
|
|
* ospf_lsa.h: elaborate on comment for ROUTER_LSA_NT
add IS_ROUTER_LSA_NT macro.
|
|
* ospf_lsa.c (router_lsa_flags): Set the correct flags for
router-lsa's. Eg OSPF_FLAG_ASBR is /not/ an LSA flag, its an
internal ospfd flag (just happens to have same value as
ROUTER_LSA_EXTERNAL). Set ROUTER_LSA_EXTERNAL for ASBRs,
ROUTER_LSA_BORDER for ABRs and ROUTER_LSA_NT for NSSA ABRs which
are OSPF_NSSA_ROLE_ALWAYS translators.
|
|
* ospf_interface.c (ospf_vl_set_params): new router LSA is not
generated when the cost of the routing entry for the virtual
link endpoint has changed. If the cost to reach the virtual link's
endpoint has changed, add router LSA timer for the backbone area.
|
|
* ospf_dump.h: fix NSSA debug define
|
|
* ospfd/ospf_zebra.c: Run it through indent -nut to fix the $%^@ing
annoying mix of tabs and spaces.
|
|
* ospfd/ospf_zebra.c: [zebra 19434] fix for disappearing OSPF routes
modify ospf_zebra_delete() to specify nexthop when deleting routes
with zebra.
|
|
* Fix lib/smux.c's reliance on daemons exporting struct
thread_master *master.
|
|
* ospfd/ospf_packet.c: Fix typos, extra squiggly bracket. Note to
self: in future make sure that when you test compile a change you
actually have the relevant configure options enabled.
|
|
* ospfd/ospf_packet.c: Update Hasso's hack slightly, add comment
elaborating on Hasso's, use the SET/CHECK_FLAG macros.
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
* (ospf_spf.c): Fix indentation - primarily the mix of tabs and spaces.
Ran through indent -nut (GNU style, but only spaces for indentation)
|
|
* Revert Cougar's sort interface names patch, causes problems with
enabling of interfaces for OSPF in ospfd.
|
|
* (ospf_spf.c): Fix consideration of costs for PtP nexthops in
ospf_nexthop_calculation().
|
|
|
|
* Merge of zebra privileges
|
|
Subject: [zebra 19263] Another memory leak!! is zebra OSPF
This memory leak gets into picture whenever any interface goes down.
Problem found and desctription: Whenever the interface goes down, the
"def_params" (member of ospf_if_info) structure memory is not freed.
Fix made: added the following line to free the "def_params" memory of
ospf_if_info before calling the "XFREE(MTYPE_OSPF_IF_INFO, ifp->info);"
The added line is:
ospf_del_if_params ((struct ospf_if_params *) IF_DEF_PARAMS (ifp));
|
|
Subject: [zebra 19262] Re: Memory leak in OSPF
Fix applied for Kamatchi's original report was to remove the auth_crypt
initialisation from the wrong function. This should fix that.
|
|
Subject: [zebra 19259] Memory leak in OSPF
The detail of the memory leak follows:
File name: ospf_interface.c
Function name: ospf_if_new_hook().
Type of leak: Overwriting the already allocated memory.
Problem found and description:
The ospf_new_if_params() fn allocates a memory for "auth_crypt" which
is overwritten, down in the fn (ospf_if_new_hook) by explicitely allocating
a memory for the same "auth_crypt".
Fix: remove allocation from ospf_new_if_params()
|
|
harm, but of course ... it is hack.
|
|
the class of machines which zebra runs on than the original defaults which
were taken from IOS (and even IOS uses much lower times these days). Lower
values greatly help with convergence.
Ideally, we'd use even lower times, but thread_add_timer() api will need to
be modified to use milliseconds. (eg JunOS uses 100ms for delay, and 700ms
for hold time, iirc from Hasso).
|
|
|
|
|
|
* ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific
match for interface lookup.
|
|
Add the 'no interface' command to all the daemons and vtysh. now it's
possible to delete interface from routeing daemons as well only if it
doesn't exist in os.
http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
|
|
|
|
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch
Add the 'no interface' command to all the daemons and vtysh.
|
|
Subject: [zebra 19093] [PATCH] Two more fixes
Show NSSA LSA route info in "show ip ospf database" output
|
|
|
|
|
|
Subject: [zebra 19091] [PATCH] NSSA fixes try2
NSSA didn't work without problems even after my previous fixes. Seems
that I tracked down problems finally.
|
|
|
|
Fix removal of Type-7 LSAs, http://bugzilla.dishone.st/show_bug.cgi?id=18
|
|
problems with NSSA are resolved, and we can determine whether this had any
point.
|
|
It didnt solve a particular problem of Hasso's, but i'm committing it just
for posterities sakes, so i dont lose it (i'll revert it immediately).
|
|
This one fixes "router xxx" node commands in vtysh. Don't get "unknown
command" error when entering "passive-interface eth0" command while
ospfd and ospf6d running etc.
|
|
http://hasso.linux.ee/zebra/ht-routemap-18042003_5.patch
Trivial fixes to sync daemon's route-map commands to have same syntax. Fixes
a lot of errors with "match ..." and "set ..." commands when using vtysh.
|
|
Subject: [zebra 17365] [PATCH] Ospf area id's DECIMAL -> ADDRESS
It was annoying for me to view area id's like 335544330 (20.0.0.10 in
address format) in configuration. Most of other network devices are
using address-like id's and so does zebra when using "show ip ospf *"
commands.
You can still enter id's in decimal format, but they are just shown in
address format.
|
|
Subject: [zebra 18689] [PATCH] misc patch
Add missing param to zlog
|
|
Subject: [zebra 18689] [PATCH] misc patch
remove unused vars
|
|
Subject: [zebra 18767] possible SIGSEGV
Fix incorrect memset
|
|
To: zebra@zebra.org
Subject: [zebra 18648] [PATCH] Selforiginated Type-7 LSA's are not flushed
from lsdb
|
