| Age | Commit message (Collapse) | Author |
|---|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* ospf_interface.h: (ospf_if_lookup_by_name) Remove declaration of a
function that does not exist.
* ospf6_interface.[ch]: (ospf6_interface_lookup_by_name) Remove unused
function.
|
|
* ospf_zebra.c: (zebra_interface_if_lookup) Must use
if_lookup_by_name_len.
|
|
* if.h: (if_lookup_by_name_len, if_get_by_name_len) New functions.
* if.c: (if_lookup_by_name_len, if_get_by_name_len) New functions.
(if_get_by_name) Tighten up code.
(interface) Use new function if_get_by_name_len.
* zclient.c: (zebra_interface_add_read) Use new if_get_by_name_len
function.
(zebra_interface_state_read) Use new if_lookup_by_name_len function.
* kernel_socket.c: (ifm_read) Use new if_lookup_by_name_len function
to save a memcpy.
* if_ioctl_solaris.c: (interface_list_ioctl) Fix subtle bug with new
if_get_by_name_len function.
* ospf_interface.c: (ospf_vl_new) Use strnlen to fix call to if_create.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
* ospf_dump.c: (show_debugging_ospf) Show if ospf event debugging
is turned on.
[backport candidate]
|
|
* rt_netlink.c: (netlink_link_change) If the status of an
operative interface changes (e.g. MTU changes), the client
daemons should be notified by calling zebra_interface_up_update.
Previously, the information was being updated in zebra's
interface structure, but the clients were not notified of
changes to an operative interface.
* ospf_zebra.c: (ospf_interface_state_up) If the MTU of an operative
interface changes, print a debug message and call ospf_if_reset()
to simulate down/up on the interface.
* ospf_interface.h: Declare new function ospf_if_reset().
* ospf_interface.c: (ospf_if_reset) New function to call ospf_if_down
and ospf_if_up for all ospf interfaces attached to an interface.
|
|
* ospf_packet.c: (ospf_write_frags) Enhance error message to
show MTU. Also make function static.
(ospf_write) Enhance error message to show interface name and MTU.
Also make function static.
|
|
* ospf_vty.c (show_ip_ospf_interface_sub): Display interface MTU and
bandwidth; this is useful for debugging problems. Also, the function
should be static.
|
|
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES
for that.
|
|
exist at all.
[backport candidate]
|
|
[backport candidate]
|
|
* ospf_lsa.c: (ospf_lsa_refresh_walker) If the system clock jumps
backward, then current time may be less than
ospf->lsa_refresher_started. This was causing invalid values
for ospf->lsa_refresh_queue.index resulting in infinite loops.
Problem fixed by casting the expression to unsigned before taking
the modulus.
[backport candidate]
|
|
* ospfd.h: Add new field struct stream *ibuf to struct ospf.
* ospfd.c: (ospf_new) Check return code from ospf_sock_init.
Allocate ibuf using stream_new(OSPF_MAX_PACKET_SIZE+1).
(ospf_finish) Call stream_free(ospf->ibuf.
* ospf_packet.c: (ospf_read) Call stream_reset(ospf->ibuf) and then
pass it to ospf_recv_packet for use in receiving the packet
(instead of allocating a new stream for each packet received).
Eliminate all calls to stream_free(ibuf).
(ospf_recv_packet) The struct stream *ibuf is now passed in as
an argument. No need to use recvfrom to peek at the packet
header (to see how big it is), just use ospf->ibuf which is
always large enough (this eliminates a system call to recvfrom).
Therefore, no need to allocate a stream just for this packet,
and no need to free it when done.
|
|
* ospf_lsdb.h: Export ospf_lsdb_clean_stat() function.
* ospf_spf.h: Add link to the LSA stat structure into vertex.
* ospf_spf.c: New functions cmp() and update_stat() to manage
candidates. Remove ospf_spf_has_vertex(), ospf_vertex_lookup(),
ospf_install_candidate() and ospf_spf_register() functions not needed
any more. Update ospf_vertex_new(), ospf_spf_next() and
ospf_spf_calculate() functions to use pqueue instead of linked list.
|
|
we are not debugging.
|
|
Fixes bugzilla #153. [backport candidate]
|
|
* ospf_packet.c: (ospf_stream_copy) remove
(ospf_packet_dup) use stream_copy instead of ospf_stream_copy
|
|
* ospf_packet.c: (ospf_recv_packet) If there is somehow a runt
packet in the queue, it must be discarded. Improve warning messages.
Fix scope to static.
(ospf_read) Fix bug: should reset the read thread in all cases
to make sure we continue to get incoming messages.
|
|
* ospf_packet.c: (ospf_recv_packet) Fix silly error wrt allocating
ibuf. Thanks Andrew.
|
|
* ospf_packet.c: (ospf_recv_packet) use stream_recvmsg.
2005-02-11 Hasso Tepper <hasso at quagga.net>
* ospf_lsdb.c: Fix sum of checksums calculation.
2005-02-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the
error message.
2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_interface.h: Reduce structure padding by putting new u_char
field multicast_memberships in a better spot (grouped with
other u_char fields type and state).
2005-02-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
2005-02-08 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
2005-02-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_network.c: (ospf_sock_init) Save errno before calling
ospfd_privs.change.
2005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print
an error message and return.
(ospf_read) If the interface state is ISM_InterfaceDown, issue
a warning message and ignore the packet.
2005-01-10 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_packet.h: Remove commented out definition of
OSPF_MAX_PACKET; neither it or the uncommented one are used any more.
* ospf_packet.c (ospf_make_ls_upd): Leave room for authentication
when deciding if an update will fit.
(ospf_packet_authspace): Factor out calculation of size required
for authentication.
(ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET.
Don't confuse readers that there is a macro.
2004-12-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_network.c: Improve all setsockopt error messages to give detailed
information on the arguments.
2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done"
messages from LOG_WARNING to LOG_INFO, since this seems to be
normal.
2004-12-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_read) Always look up the interface if
ospf_recv_packet returns NULL ifp, since some platforms such
as Solaris 8 appear to support ifindex retrieval but don't.
2004-12-22 Hasso Tepper <hasso at quagga.net>
* ospf_dump.c: Show debug configuration in vtysh.
* ospf_vty.c: Fix "show ip ospf" output. Router can't be elected in
any case if it's configured as "translate-never".
* ospf_lsdb.[ch]: New function to calculate sum of checksums.
* ospf_vty.c: Bugfix to show really number of AS external LSAs, not
number of all LSAs with AS scope, this includes opaque as LSAs as
well, show this number separately. Show numbers and sums of
checksums for each type of LSAs.
* ospf_lsa.c: Calculate checksum before putting LSA into database.
2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_interface.h: Declare new function ospf_default_iftype.
* ospf_interface.c: (ospf_default_iftype) New function to centralize
this logic in one place.
* ospf_zebra.c: (ospf_interface_add) Use new function
ospf_default_iftype.
* ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic
by using new function ospf_default_iftype.
2004-12-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc) Should be static, not global.
(ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning
messages to include identifying information (e.g. router id).
* ospf_nsm.c: (nsm_change_state) Improve info message to include
router id and state names.
2004-12-09 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_apiserver.c (ospf_apiserver_term): Obtain struct
ospf_apiserver * from listnode. Remove unused variables. Follows
suggestion from Jay Fenlason.
2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* *.c: Change level of debug messages to LOG_DEBUG.
2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message
from LOG_NOTICE to LOG_DEBUG.
2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
2004-11-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_db_desc_proc) Fix spelling of packet in warning
message and in comment.
(ospf_db_desc) Warning message that a packet is being discarded
should give the router id of the packet source. Fix spelling
of packet in two warning messages.
(ospf_ls_req) Warning message that a link state request is being
discarded should give the router id of the neighbor that sent it.
2004-11-26 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_main.c: Remove #include "debug.h" (was not being used, and
lib/debug.h has now been deleted).
2004-11-25 Hasso Tepper <hasso at quagga.net>
* ospf_main.c: Make group to run as configurable.
2004-11-15 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_packet.c (ospf_recv_packet): Assume CMSG_SPACE is present
and works (lib/zebra.h provides if OS doesn't).
2004-11-15 Paul Jakma <paul@dishone.st>
* ospf_{apiserver,te}.c: ospf_lsa_free's should be ospf_lsa_unlock.
2004-11-12 Paul Jakma <paul@dishone.st>
* ospf_ia.c: (process_summary_lsa) Only an ABR has any reason to
ignore stub area summary default. Even so it seems a strange
check, add a comment to that effect.
2004-11-04 Paul Jakma <paul@dishone.st>
* ospfd.c: (ospf_network_match_iface) revert to previous network
statement match behaviour.
2004-11-02 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_write_frags) remove iov arg, msg already points
to it. Add convenience pointer to msg->msg_iov[1], and use this,
fixing the unfortunate borkenness introduced in moving of this code
to a function.
(ospf_write) remove iovp and fix up call to previous.
(ospf_ls_upd_packet_new) cast size to long int - unfortunately
glibc's size_t format modifier is not portable.
2004-10-31 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_write_frags) Add debug output
(ospf_write) set type early, so we can pass it to
ospf_write_frags.
(ospf_ls_upd_packet_new) print size in debug output when too large
packet is encountered.
* ospf_zebra.c: (ospf_distribute_list_update_timer) Ugly misuse of
THREAD_ARG to store an integer, but it should at least use same
same type to retrieve the value. Assert value is sane.
2004-10-22 Paul Jakma <paul@dishone.st>
* ospf_network.c: (ospf_sock_init) call neutral setsock_ifindex()
function.
* ospf_packet.c: (ospf_read) manually look up ifindex
if system could not have returned one, eg openbsd, thanks to Rivo
Nurges for highlighting problem and fix.
Change setsockopt_pktinfo to setsockopt_ifindex.
2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com>
* ospf_snmp.c: (ospf_snmp_if_update) Fix logic to handle PtP links
with dedicated subnets properly.
* ospf_lsa.c: (lsa_link_ptop_set) ditto.
* ospfd.c: (ospf_network_match_iface) ditto.
(ospf_network_run) ditto.
* ospf_interface.c: (ospf_if_is_configured) ditto.
(ospf_if_lookup_by_prefix) ditto.
(ospf_if_lookup_recv_if) ditto.
* ospf_vty.c: (show_ip_ospf_interface_sub) Display the peer or
broadcast address if present.
2004-10-13 Hasso Tepper <hasso at quagga.net>
* ospf_main.c: Unbreak compilation with ospfapi disabled.
* ospf_snmp.c: Remove defaults used to initialize smux connection to
snmpd. Connection is initialized only if smux peer is configured.
2004-10-12 Hasso Tepper <hasso at quagga.net>
* ospf_main.c, ospf_opaque.c: Unbreak ospfclient compilation - move
static variable from ospf_main.c into ospf_opaque.c.
2004-10-11 Hasso Tepper <hasso at quagga.net>
* ospf_main.c, ospf_opaque.c: Disable ospfapi init by default. New
command line switch to enable it.
2004-10-11 Paul Jakma <paul@dishone.st>
* ospf_dump.c: (ospf_ip_header_dump) Assume header is in host order
remove ntohs that should have dissappeared. Take struct ip
as argument, caller has to know there's an IP header at start of
stream anyway.
* ospf_dump.h: update declaration of ospf_ip_header_dump.
* ospf_packet.c: (ospf_write) correct call to
sockopt_iphdrincl_swab_htosys which was munging the header.
(ospf_recv_packet) ip_len is needed for old OpenBSD fixup.
(ospf_read) sockopt_iphdrincl_swab_systoh ip header as soon as
we have it.
* (global) Const char update and signed/unsigned fixes.
* (various headers) size defines should be unsigned.
* ospf_interface.h: remove duplicated defines, include the
authoritative header - though, these defines should probably
be moved to a dedicated header, or ospfd.h.
* ospf_lsa.h: (struct lsa) ls_seqnum should be unsigned.
* ospf_packet.c: (ospf_write) cast result of shift to unsigned.
2004-10-08 Hasso Tepper <hasso at quagga.net>
* *.[c|h]: Fix compiler warnings: make some strings const, signed ->
unsigned, remove unused variables etc.
2004-10-07 Greg Troxel <gdt@claude.ir.bbn.com>
* ospf_apiserver.c (ospf_apiserver_unregister_opaque_type): Don't
use of variable names 'node' and 'nextnode' to avoid possible
conflict with list macros. Move variable declaration inside for
loop after a statement to top of function.
2004-10-07 Paul Jakma <paul@dishone.st>
* ospf_snmp.c: Missed list typedef update
* ospf_dump.c: Include sockopt.h for header swab functions.
2004-10-05 Paul Jakma <paul@dishone.st>
* ospf_packet.c: replace ospf_swap_iph_to... with
sockopt_iphdrincl_swab_...
2004-10-03 James R. Leu <jleu at mindspring.com>
* ospf_zebra.c: Read router id related messages from zebra daemon.
Schedule router-id update thread if it's changed.
* ospfd.c: Remove own router-id selection function. Use router id from
zebra daemon if it isn't manually overriden in configuration.
2004-09-27 Paul Jakma <paul@dishone.st>
* ospf_dump.c: (ospf_ip_header_dump) Use HAVE_IP_HDRINCL_BSD_ORDER
Apply to offset too. Print ip_cksum, lets not worry about
possible 2.0.37 compile problems.
* ospf_packet.c: (ospf_swap_iph_to{n,h}) Use
HAVE_IP_HDRINCL_BSD_ORDER.
(ospf_recv_packet) ditto.
(ospf_write) Fixup iov argument to ospf_write_frags.
(struct msghdr).msg_name is caddr_t on most platforms.
(ospf_recv_packet) ditto. And msg_flags is not always there
memset struct then set fields we care about rather than
initialise all fields individually.
2004-09-26 Hasso Tepper <hasso at quagga.net>
* ospf_abr.c, ospf_dump.c, ospf_lsa.c, ospf_packet.c, ospf_vty.c,
ospf_zebra.c: Fix compiler warnings.
2004-09-24 Paul Jakma <paul@dishone.st>
* ospf_apiserver.{c,h}: lists typedef removal cleanup.
update some list loops to LIST_LOOP. some miscellaneous indent
fixups.
(ospf_apiserver_unregister_opaque_type) fix listnode_delete of
referenced node in loop.
(ospf_apiserver_term) loops calling ospf_apiserver_free, which
deletes referenced nodes from apiserver_list, fixed.
* ospf_interface.h: lists typedef removal cleanup.
* ospf_opaque.{c,h}: lists typedef removal cleanup. update some list
loops to LIST_LOOP. miscellaneous style and indent fixups.
* ospf_te.{c,h}: ditto
* ospf_packet.c: lists typedef removal cleanup.
(ospf_write) ifdef fragmentation support. move actual
fragmentation out to a new, similarly ifdefed, function.
(ospf_write_frags) fragmented write support, moved from previous.
2004-09-23 Hasso Tepper <hasso at quagga.net>
* *.[c|h]: list -> struct list *, listnode -> struct listnode *.
2004-09-12 Paul Jakma <paul@dishone.st>
* ospf_packet.c: Fix bugzilla #107
(ospf_packet_max) get rid of the magic 88 constant
(ospf_swab_iph_ton) new function. set ip header to network order,
taking BSDisms into account.
(ospf_swab_iph_toh) the inverse.
(ospf_write) Add support for IP fragmentation, will only work on
linux though, other kernels make it impossible. get rid of the
magic 4 constant.
(ospf_make_ls_upd) Bound check to end of stream, not to
interface mtu.
(ospf_ls_upd_packet_new) New function, allocate upd packet
taking oversized LSAs into account.
(ospf_ls_upd_queue_send) use ospf_ls_upd_packet_new to allocate,
rather than statically allocating mtu sized packet buffer, which
actually was wrong - it didnt take ip header into account, which
should not be included in packet buffer.
(ospf_ls_upd_send_queue_event) minor tweaks and remove
TODO comment.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_spf.c (ospf_spf_calculate): Many more comments and debug
print statements. New function ospf_vertex_dump used in debugging.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_spf.h (struct vertex): Comments for flags and structure members.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_route.c: When finding an alternate route, log cost as well.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_interface.c (ospf_lookup_if_params): Initialize af in
struct prefix allocated on stack.
2004-08-31 David Wiggins <dwiggins@bbn.com>
* ospf_packet.c (ospf_ls_ack_send_delayed): In p2mp mode, send
acks to AllSPFRouters, rather than All-DR.
2004-08-27 Hasso Tepper <hasso at quagga.net>
* ospf_vty.c: Don't print ospf network type under interface only
if interface is in broadcast mode and interface type really is
broadcast. Fixes Bugzilla #108.
2004-08-27 David Wiggins <dwiggins@bbn.com>
* ospf_spf.c (ospf_nexthop_calculation): Initialize address family
in on-stack struct prefix_ipv4. Fixes point-to-multipoint SPF
calculation.
2004-08-26 Greg Troxel <gdt@fnord.ir.bbn.com>
* ospf_packet.c (ospf_recv_packet): adjust size declaration of
buffer used to get interface index so that it compiles on other
than Linux and includes the required alignment space. Probably
this was only working on sparc/sparc64 because most of
sockaddr_dl was not being written.
2004-08-19 Paul Jakma <paul@dishone.st>
* ospf_packet.c: update to match sockopt renames.
2004-08-04 Paul Jakma <paul@dishone.st>
* ospf_spf.c: (ospf_spf_consider_nexthop) Add comment about issue.
Compare only against list head - all nexthops must be same cost
anyway, fixes a reference-listnode-after-delete bug noted by
Kir Kostuchenko.
(ospf_nexthop_calculation) Use ospf_spf_consider_nexthop for all
candidates attached to root.
2004-07-27 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_ls_upd_send_queue_event) fix thinko from
last fix for ospfd wedging due to oversize LSAs: dont list loop on
ospf_ls_upd_queue_send() - guaranteed segfault.
2004-07-27 Paul Jakma <paul@dishone.st>
* ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out
the LSA as then free_opaque_info_per_id() can never unlock (and
free) the LSA. Reported by Gunnar Stigen.
2004-07-23 Paul Jakma <paul@dishone.st>
* ospf_network.c: Replace PKTINFO/RECVIF with call to
setsockopt_pktinfo
* ospf_packet.c: Use getsockopt_pktinfo_ifindex and
SOPT_SIZE_CMSG_PKTINFO_IPV4.
2004-07-14 Paul Jakma <paul@dishone.st>
* ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for
problem reported by Peter Frost amongst others, where function
will spin indefinitely if update list contains LSAs greater than
MTU-headers or other condition leading to update list never being
cleared. Problem of what to do with these LSAs remains.
(ospf_make_ls_upd) add comment about large LSA problem,
indentation cleanup.
2004-07-01 Greg Troxel <gdt@fnord.ir.bbn.com>
* Makefile.am (lib_LTLIBRARIES): make libospf shared
2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com>
* Makefile.am: Add shlib support.
2004-06-10 Hasso Tepper <hasso@estpak.ee>
* *: Removed ifdefs HAVE_NSSA.
2004-06-06 Paul Jakma <paul@dishone.st>
* ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous.
ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format
2004-05-31 Sagun Shakya <sagun.shakya@sun.com>
* ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if
index is out of range.
ospf_flood.c: endianness fix
ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum
in various places.
2004-05-10 Hasso Tepper <hasso@estpak.ee>
* ospf_zebra.c, ospfd.c: Move ospf_prefix_list_update() function
to ospf_zebra.c from ospfd.c and add redistribution updates if
route-map is used in redistribution.
* ospf_main.c: Remove now useless call to ospf_init().
2004-05-08 Paul Jakma <paul@dishone.st>
* ospf_zebra.c: Sync with lib/zclient changes
2004-05-05 Paul Jakma <paul@dishone.st>
* ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is
defined. Warn at compile and runtime. Use
IPTOS_PREC_INTERNETCONTROL otherwise.
* ospf_packet.c: (ospf_associate_packet_vl) cleanup, move
some of the checks up to ospf_read, return either a
virtual link oi, or NULL.
(ospf_read) Cleanup, make it responsible for checks. Remove
the nbr lookup - moved to ospf_neighbor. Adjust all nbr
lookups to use new wrappers exported by ospf_neighbor.
* ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup.
* ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface
neighbour table by router-id for virtual-link ospf_interfaces,
not by peer_addr (which breaks for asymmetric vlinks)
(ospf_nbr_lookup) add a wrapper for nbr lookups to deal with
above.
* ospf_interface.c: (ospf_vl_set_params) Catch changes of interface
address for either end of a virtual-link, and hence potential cost
changes.
2004-04-22 Hasso Tepper <hasso@estpak.ee>
* ospf_zebra.c: Don't ignore reject/bh routes, it's the only way
to "summarize" routes in ASBR at the moment.
2004-04-20 Hasso Tepper <hasso@estpak.ee>
* ospfd.c: Unset NP flag if area is going to be normal or stub.
Fixes UNH OSPF_NSSA.1.2a comment.
* ospf_abr.c: Originate default into stub/nssa area even if
summaries are disabled.
* ospf_zebra.c: Don't attempt to redistribute 127.0.0.0/8.
2004-04-19 Hasso Tepper <hasso@estpak.ee>
* ospf_vty.c: Don't warn that export- and import-list can't be
configured to backbone area if they are applied and are working
fine.
2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com>
* ospf_packet.c: Don't drop packets in Solaris x86.
[quagga-dev 1005].
2004-03-18 Amir Guindehi <amir@datacore.ch>
* ospf_opaque.c: Attempt to correct the incorrect behavior of
Quagga's ospfd in the special situation that a node's opaque
capability has changed as "ON -> OFF -> ON". [quagga-dev 843].
2004-02-19 Sowmini Varadhan <sowmini.varadhan@sun.com>
* ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range
should be configured with the highest cost path within the range,
not lowest.
2004-02-17 Paul Jakma <paul@dishone.st>
* ospf_zebra.c: (ospf_interface_delete) Do not delete the interface
params, nor the interface structure, if an interface delete
message is received from zebra.
* ospf_interface.c: (ospf_if_delete_hook) Delete the interface
params and interface, ie that which was previously removed in
(ospf_interface_delete) above.
2004-02-11 Hasso Tepper <hasso@estpak.ee>
* ospf_interface.c, ospf_zebra.c: Don't attempt to read path->oi->ifp
if oi doesn't exist any more.
2004-02-11 Vadim Suraev <vadim.suraev@terayon.com>
* ospf_packet.c (ospf_ls_upd): Router should flush received network
LSA if it was originated with older router-id ([zebra 14710] #6).
2003-12-08 Mattias Amnefelt <mattiasa@kth.se>
* ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len
network byte order.
2003-12-05 Greg Troxel <gdt@poblano.ir.bbn.com>
* ospfd.c (ospf_network_match_iface): Rewrite code for clarity
while trying not to change semantics. Add ifdefed-out code to
avoid matching ppp interfaces whose destination address does not
also match the prefix under consideration, to help out people with
problems due to as-yet-unfixed bugs with p2p interfaces coming and
going.
2003-07-25 kamatchi soundaram <kamatchi@tdd.sj.nec.com>
* ospf_packet.c (ospf_ls_upd_send_queue_event): get next route
node in body of the loop to avoid chance that route node
is unlocked and deleted before the next iteration tries to
get next route node.
2003-05-24 Kenji Yabuuchi
* ospf_interface.c(ospf_if_lookup_recv_if): Use the most specific
match for interface lookup.
2003-05-18 Hasso Tepper <hasso@estpak.ee>
* ospf_vty.c: Show NSSA LSA route info in "show ip ospf database"
output
2003-05-16 Hasso Tepper <hasso@estpak.ee>
* ospf_lsa.c: Fix handling of NSSA
2003-04-23 Hasso Tepper <hasso@estpak.ee>
* ospf_vty.c: fix "router xxx" node commands in vtysh
2003-04-19 Hasso Tepper <hasso@estpak.ee>
* {ospf_abr,ospfd}.c: area id's DECIMAL -> ADDRESS
* ospf_routemap.c: sync daemon's route-map commands to have same
syntax.
2003-04-19 Sergey Vyshnevetskiy <serg@vostok.net>
* ospf_packet.c: Add missing param to zlog
* ospf_flood.c: remove unused vars
2003-04-17 Denis Ovsienko <zebra@pilot.org.ua>
* ospf_interface.c: fix incorrect memset
2003-04-10 Amir Guindehi <amir@datacore.ch>
* ospf_lsa.[ch]: opaque LSA fix, use ospf_lookup.
2003-04-03 David Watson <dwatson@eecs.umich.edu>
* ospf_lsa.c: byte order fix
2002-03-17 Amir Guindehi <amir@datacore.ch>
* ospf_apiserver.[ch]: Merge Ralph Keller's OSPFAPI support.
* ospf_api.[ch]: Merge Ralph Keller's OSPFAPI support.
* ospfclient: OSPFAPI demonstration client.
2003-01-23 Masahiko Endo <endo@suri.co.jp>
* ospf_ism.c: NSM event schedule bug fix.
2002-10-30 Greg Troxel <gdt@ir.bbn.com>
* ospf_packet.c (ospf_make_md5_digest): MD5 length fix.
2002-10-23 endo@suri.co.jp (Masahiko Endo)
* ospf_opaque.c: Update Opaque LSA patch.
2002-10-23 Ralph Keller <keller@tik.ee.ethz.ch>
* ospf_vty.c (show_ip_ospf_database): Fix CLI parse.
2002-10-23 Juris Kalnins <juris@mt.lv>
* ospf_interface.c (ospf_if_stream_unset): When write queue
becomes empty stop write timer.
2002-10-10 Greg Troxel <gdt@ir.bbn.com>
* ospf_packet.c (ospf_check_md5_digest): Change >= to > to make it
conform to RFC.
2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.93 released.
2002-06-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_spf.c (ospf_nexthop_calculation): Add NULL set to oi and
check of l2. Reported by: Daniel Drown <dan-zebra@drown.org>
(ospf_lsa_has_link): LSA Length calculation fix. Reported by:
Paul Jakma <paulj@alphyra.ie>.
* ospfd.c (ospf_if_update): Fix nextnode reference bug. Reported
by: juris@mt.lv.
2002-01-21 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospfd.c: Merge [zebra 11445] Masahiko ENDO's Opaque-LSA support.
2001-08-27 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_interface.c (ospf_add_to_if): Use /32 address to register
OSPF interface information.
(ospf_delete_from_if): Likewise.
* ospf_zebra.c (ospf_interface_address_delete): Likewise.
2001-08-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_zebra.c (ospf_redistribute_unset): When redistribute type
is OSPF, do not unset redistribute flag.
2001-08-19 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.92a released.
2001-08-15 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* zebra-0.92 released.
2001-08-12 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospfd.c (ospf_config_write): auto-cost reference-bandwidth
configuration display.
2001-07-24 David Watson <dwatson@eecs.umich.edu>
* ospf_spf.c (ospf_spf_next): Modify ospf_vertex_add_parent to
check for an existing link before connecting the parent and child.
ospf_nexthop_calculation is also modified to check for duplicate
entries when copying from the parent. Finally, ospf_spf_next
removes duplicates when it merges two equal cost candidates.
2001-07-23 itojun@iijlab.net
* ospfd.c (show_ip_ospf_neighbor): Check ospf_top before use it
[zebra 8549].
2001-07-23 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_packet.c (ospf_write): Remove defined(__OpenBSD__) to make
it work on OpenBSD.
2001-06-26 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_zebra.c (config_write_ospf_default_metric): Display
default-metric configuration.
2001-06-18 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_ia.h (OSPF_EXAMINE_SUMMARIES_ALL): Remove old macros.
2001-05-28 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
* ospf_snmp.c (ospfIfEntry): Fix interface lookup bug to avoid
crush.
(ospfIfMetricEntry): Likewise.
2001-03-18 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_read): Fix typo. Reported by: "Jen B
Lin'Kova" <jen@stack.net>.
2001-03-15 Gleb Natapov <gleb@nbase.co.il>
* ospf_interface.c (ip_ospf_network): Set interface parameter.
(interface_config_write): Add check for OSPF_IFTYPE_LOOPBACK.
* ospf_zebra.c (ospf_interface_add): Set interface parameter.
2001-02-21 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_recv_packet): Solaris also need to add
(iph.ip_hl << 2) to iph.ip_len.
2001-02-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospfd.h (OSPF_LS_REFRESH_TIME): Fix OSPF_LS_REFRESH_TIME value.
Suggested by: David Watson <dwatson@eecs.umich.edu>.
* ospf_zebra.c (zebra_init): Remove zebra node.
* ospfd.c (ospf_area_range_set): Function name is changed from
ospf_ara_range_cmd.
(ospf_area_range_unset): New function which separated from DEFUN.
New commands are added:
"no area A.B.C.D range A.B.C.D/M advertise"
"no area <0-4294967295> range A.B.C.D/M advertise"
"no area A.B.C.D range A.B.C.D/M not-advertise"
"no area <0-4294967295> range A.B.C.D/M not-advertise"
* ospf_lsa.c (ospf_lsa_more_recent): Fix previous change.
2001-02-08 Matthew Grant <grantma@anathoth.gen.nz>
* ospf_network.c (ospf_if_add_allspfrouters): Use
setsockopt_multicast_ipv4.
(ospf_if_drop_allspfrouters): Likewise.
* ospf_lsa.c (ospf_router_lsa_install): Add rt_recalc flag.
(ospf_network_lsa_install): Likewise.
(ospf_summary_lsa_install): Likewise.
(ospf_summary_asbr_lsa_install): Likewise.
(ospf_external_lsa_install): Likewise.
(ospf_lsa_install): Call ospf_lsa_different to check this LSA is
new one or not.
2001-02-08 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_zebra.c (ospf_interface_delete): Do not free interface
structure when ospfd receive interface delete message to support
pseudo interface.
2001-02-01 Dick Glasspool <dick@ipinfusion.com>
* ospfd.c (area_range_notadvertise): Change area range "suppress"
command to "not-advertise".
* ospfd.h (OSPF_LS_REFRESH_TIME): Change OSPF_LS_REFRESH_TIME from
1800 to 60.
* ospf_abr.c (ospf_abr_update_aggregate): When update_aggregate is
updating the area-range, the lowest cost is now saved.
* ospf_lsa.c (ospf_lsa_more_recent): Routing to compare sequence
numbers rather than creating overflow during calculation.
2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org>
* zebra-0.91 is released.
2001-01-31 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_db_desc_proc): Do not continue process when
NSM_SeqNumberMismatch is scheduled.
(ospf_ls_req): Free ls_upd when return from this function.
(ospf_ls_upd_timer): When update list is empty do not call
ospf_ls_upd_send(). Suggested by: endo@suri.co.jp (Masahiko
Endo).
2001-01-26 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_lsa.c (ospf_maxage_flood): Flood LSA when it reaches
MaxAge. RFC2328 Section 14.
(ospf_maxage_lsa_remover): Call above function during removing
MaxAge LSA.
2001-01-26 Dick Glasspool <dick@ipinfusion.com>
* ospf_flood.c (ospf_flood_through_as): Function is updated for
NSSA Translations now done at ospf_abr.c with no change in P-bit.
* ospf_lsa.c (ospf_get_nssa_ip): Get 1st IP connection for Forward
Addr.
(ospf_install_flood_nssa): Leave Type-7 LSA at Lock Count = 2.
* ospf_ase.c (ospf_ase_calculate_route): Add debug codes.
* ospf_abr.c (ospf_abr_translate_nssa): Recalculate LSA checksum.
* ospf_packet.h (OSPF_SEND_PACKET_LOOP): Added for test packet.
* ospf_dump.c (ospf_lsa_type_msg): Add OSPF_GROUP_MEMBER_LSA and
OSPF_AS_NSSA_LSA.
* ospfd.c (data_injection): Function to inject LSA. This is
debugging command.
2001-01-11 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_route.c (ospf_route_match_same): Remove function.
(ospf_route_match_same_new): Renamed to ospf_route_match_same.
* ospf_zebra.c (ospf_interface_address_delete): Add check for
oi->address. Suggested by Matthew Grant
<grantma@anathoth.gen.nz>.
(ospf_zebra_add): Remove function.
(ospf_zebra_add_multipath): Rename to ospf_zebra_add.
* ospf_interface.c: Remove HAVE_IF_PSEUDO part.
* ospf_zebra.c: Likewise.
2001-01-10 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_ase.c: Remove OLD_RIB part.
* ospf_route.c: Likewise.
* zebra-0.90 is released.
* ospf_packet.c (ospf_recv_packet): Use ip_len adjestment code to
NetBSD.
2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_route.c (ospf_route_delete): Use
ospf_zebra_delete_multipath.
2001-01-09 Matthew Grant <grantma@anathoth.gen.nz>
* ospf_interface.c (ospf_if_cleanup): Function name is renamed
from ospf_if_free(). Rewrite whole procudure to support primary
address deletion.
* ospf_zebra.c (ospf_interface_address_delete): Add primary
address deletion process.
2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
* ospf_packet.c (ospf_recv_packet): OpenBSD has same ip_len
treatment like FreeBSD.
2001-01-09 endo@suri.co.jp (Masahiko Endo)
* ospf_packet.c (ospf_recv_packet): FreeBSD kernel network code
strips IP header size from receiving IP Packet. So we adjust
ip_len to whole IP packet size by adding IP header size.
2001-01-08 endo@suri.co.jp (Masahiko Endo)
* ospf_network.c (ospf_serv_sock): When socket() is failed return
|
|
[backport candidate]
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
* ospf_packet.c: (ospf_write) If sendmsg fails, give more info in the
error message.
|
|
* ospf_interface.h: Reduce structure padding by putting new u_char
field multicast_memberships in a better spot (grouped with
other u_char fields type and state).
|
|
* ospf_interface.h: Improve passive_interface comment. Add new
multicast_memberships bitmask to struct ospf_interface to track
active multicast subscriptions. Declare new function
ospf_if_set_multicast.
* ospf_interface.c: (ospf_if_set_multicast) New function to configure
multicast memberships properly based on the current
multicast_memberships status and the current values of the
ospf_interface state, type, and passive_interface status.
(ospf_if_up) Remove call to ospf_if_add_allspfrouters (this is
now handled by ism_change_state's call to ospf_if_set_multicast).
(ospf_if_down) Remove call to ospf_if_drop_allspfrouters (now
handled by ism_change_state).
* ospf_ism.c: (ospf_dr_election) Remove logic to join or leave
the DRouters multicast group (now handled by ism_change_state's call
to ospf_if_set_multicast).
(ism_change_state) Add call to ospf_if_set_multicast to change
multicast memberships as necessary to reflect the new interface state.
* ospf_packet.c: (ospf_hello) When a Hello packet is received on a
passive interface: 1. Increase the severity of the error message
from LOG_INFO to LOG_WARNING; 2. Add more information to the error
message (packet destination address and interface address);
and 3. If the packet was sent to ospf-all-routers, then try
to fix the multicast group memberships.
(ospf_read) When a packet is received on an interface whose state
is ISM_Down, enhance the warning message to show the packet
destination address, and try to update/fix the multicast group
memberships if the packet was sent to a multicast address.
When a packet is received for ospf-designated-routers, but the
current interface state is not DR or BDR, then increase the
severity level of the error message from LOG_INFO to LOG_WARNING,
and try to fix the multicast group memberships.
* ospf_vty.c: (ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from active to passive.
(no_ospf_passive_interface) Call ospf_if_set_multicast for
any ospf interface that may have changed from passive to active.
(show_ip_ospf_interface_sub) Show multicast group memberships.
|
|
* ospf_packet.c: (various) Remove unneeded stream_set_putp abuse.
|
|
* ospf_packet.c: (ospf_read) Fix bug: must check for state ISM_Down,
not for event ISM_InterfaceDown. And improve the message by
adding the interface flags.
* if.h: Declare if_flag_dump.
[backport candidate]
|
|
* ospf_network.c: (ospf_sock_init) Save errno before calling
ospfd_privs.change.
|
|
* ospf_packet.c: (ospf_packet_add) If oi->obuf is NULL, print
an error message and return.
(ospf_read) If the interface state is ISM_InterfaceDown, issue
a warning message and ignore the packet.
|
|
* ospf_packet.h: Remove commented out definition of
OSPF_MAX_PACKET; neither it or the uncommented one are used any more.
* ospf_packet.c (ospf_make_ls_upd): Leave room for authentication
when deciding if an update will fit.
(ospf_packet_authspace): Factor out calculation of size required
for authentication.
(ospf_make_db_desc): Use ospf_max_packet, not OSPF_MAX_PACKET.
Don't confuse readers that there is a macro.
|
|
* ospf_network.c: Improve all setsockopt error messages to give detailed
information on the arguments.
|
|
* ospf_packet.c: (ospf_db_desc) Reduce severity of "Negotiation done"
messages from LOG_WARNING to LOG_INFO, since this seems to be
normal.
|
|
* ospf_packet.c: (ospf_read) Always look up the interface if
ospf_recv_packet returns NULL ifp, since some platforms such
as Solaris 8 appear to support ifindex retrieval but don't.
|
|
|
|
R. Leu (author of original idea).
|
|
say so - we can never be translator.
|
|
|
|
* ospf_interface.h: Declare new function ospf_default_iftype.
* ospf_interface.c: (ospf_default_iftype) New function to centralize
this logic in one place.
* ospf_zebra.c: (ospf_interface_add) Use new function
ospf_default_iftype.
* ospf_vty.c: (no_ip_ospf_network,config_write_interface) Fix logic
by using new function ospf_default_iftype.
|
|
* ospf_packet.c: (ospf_db_desc) Should be static, not global.
(ospf_hello,ospf_db_desc,ospf_ls_upd,ospf_ls_ack) Improve warning
messages to include identifying information (e.g. router id).
* ospf_nsm.c: (nsm_change_state) Improve info message to include
router id and state names.
|
|
ospf_apiserver * from listnode. Remove unused variables. Follows
suggestion from Jay Fenlason.
|
|
Remove unused variable.
Add comment: this is seriously broken, and needs fixing. It appears
likely to segfault if ever called. Comments please - should I make
the fix I suggest in the comment? -gdt
|
|
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* ospf_packet.c: (ospf_db_desc) Reduce priority on a debug message
from LOG_NOTICE to LOG_DEBUG.
|
