| Age | Commit message (Collapse) | Author |
|---|
|
* ospf_packet.c (ospf_recv_packet): adjust size declaration of
buffer used to get interface index so that it compiles on other
than Linux and includes the required alignment space. Probably
this was only working on sparc/sparc64 because most of sockaddr_dl
was not being written.
|
|
* ospf_packet.c: update to match sockopt renames.
|
|
* ospf_spf.c: (ospf_spf_consider_nexthop) Add comment about issue.
Compare only against list head - all nexthops must be same cost
anyway, fixes a reference-listnode-after-delete bug noted by
Kir Kostuchenko.
(ospf_nexthop_calculation) Use ospf_spf_consider_nexthop for all
candidates attached to root.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) fix thinko from
last fix for ospfd wedging due to oversize LSAs: dont list loop on
ospf_ls_upd_queue_send() - guaranteed segfault.
|
|
* ospf_opaque.c: (ospf_opaque_lsa_flush_schedule) do not NULL out
the LSA as then free_opaque_info_per_id() can never unlock (and
free) the LSA. Reported by Gunnar Stigen.
|
|
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
* */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir
-lfoo", to avoid linking against installed libraries from a
previous version.
* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared
library version number to be 0.0
* configure.ac: remove spurious , so extract.pl is chmod'd +x.
* HACKING: explain shared library versioning rules
|
|
* ospf_network.c: Replace PKTINFO/RECVIF with call to
setsockopt_pktinfo
* ospf_packet.c: Use getsockopt_pktinfo_ifindex and
SOPT_SIZE_CMSG_PKTINFO_IPV4.
|
|
* ospf_packet.c: (ospf_ls_upd_send_queue_event) Partial fix for
problem reported by Peter Frost amongst others, where function
will spin indefinitely if update list contains LSAs greater than
MTU-headers or other condition leading to update list never being
cleared. Problem of what to do with these LSAs remains.
(ospf_make_ls_upd) add comment about large LSA problem,
indentation cleanup.
|
|
|
|
|
|
|
|
libzebra and libospfapiclient are now built shared, and linked shared
with the daemons. This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller. Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries. As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit.
|
|
|
|
to read system one.
|
|
|
|
* ospf_dump.c,ospf_lsa.c: Fix typos of merge of previous.
ospf_flood.c: (ospf_process_self_originated_lsa) fix zlog format.
|
|
* ospf_dump.c: (ospf_lsa_header_dump) LOOKUP can return null if
index is out of range.
ospf_flood.c: endianness fix
ospf_lsa.c: Missing ntohl's on (struct lsa *)->data->ls_seqnum
in various places.
|
|
used in route-map used to filter redistributions.
* Move ospf_prefix_list_update() function from ospfd.c to ospf_zebra.c.
|
|
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes
(bgp_interface_address_delete) ditto.
(bgp_zebra_announce) ditto.
(bgp_zebra_withdraw) ditto.
* isis_zebra.c: Sync with zclient changes.
* zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe
message format.
* ospf6_zebra.c: Sync to zclient changes
* ospf_zebra.c: Sync with lib/zclient changes
* rip_zebra.c: sync with zclient changes.
* rip_interface.c: ditto.
* ripng_{interface,zebra}.c: sync with zclient changes
2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com>
* zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route
(zapi_ipv4_delete) ditto.
(zapi_ipv4_route) add/delete a route by way of cmd arg.
(zapi_ipv6_add) collapsed into zapi_ipv6_route.
(zapi_ipv6_delete) ditto.
(zapi_ipv6_route) add/delete a route by way of cmd arg.
(zebra_interface_address_delete_read) collapsed into
zebra_interface_address_read.
(zebra_interface_address_delete_read) ditto.
(zebra_interface_address_read) read address add/delete messages
by way of type argument. Describe command message format.
(zebra_interface_add_read) Unconditionally read new ifmtu6 field.
Describe command message format.
(zebra_interface_state_read) Unconditionally read new ifmtu6 field.
(zclient_redistribute_set) Collapsed into zclient_redistribute
(zclient_redistribute_unset) ditto
(zclient_redistribute) set/unset redistribution.
(zclient_redistribute_default_set) Collapsed into
zclient_redistribute_default.
(zclient_redistribute_default_unset) ditto.
(zclient_redistribute_default) Redistribute default set/unset.
* zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add
zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add
zclient_redistribute. Ditto for
zclient_redistribute_default_{set/unset}.
|
|
* ospf_network.c: (ospf_sock_init) Check whether IP_HDRINCL is
defined. Warn at compile and runtime. Use
IPTOS_PREC_INTERNETCONTROL otherwise.
|
|
* ospf_interface.c: (ospf_vl_set_params) Catch changes of interface
address for either end of a virtual-link, and hence potential cost
changes.
|
|
* ospf_packet.c: (ospf_associate_packet_vl) cleanup, move
some of the checks up to ospf_read, return either a
virtual link oi, or NULL.
(ospf_read) Cleanup, make it responsible for checks. Remove
the nbr lookup - moved to ospf_neighbor. Adjust all nbr
lookups to use new wrappers exported by ospf_neighbor.
* ospf_neighbor.h: Add ospf_neigbour_get and ospf_nbr_lookup.
* ospf_neighbor.c: (ospf_neigbour_get) Index ospf_interface
neighbour table by router-id for virtual-link ospf_interfaces,
not by peer_addr (which breaks for asymmetric vlinks)
(ospf_nbr_lookup) add a wrapper for nbr lookups to deal with
above.
|
|
|
|
|
|
|
|
|
|
warnings and update documentation.
|
|
* ospf_spf.h: Add backlink field to struct vertex
* ospf_spf.h: (ospf_vertex_new) initialise backlink
(ospf_lsa_has_link) return index of link back to
vertex V from candidate vertex W, or -1 if no link exists.
(ospf_spf_next) save backlink index for candidate vertex
* ospf_interface.c: (ospf_vl_set_params) Use the backlink index
to determine correct address for virtual-link peers. Fall back
to older "pick first link" method if no backlink index exists.
|
|
|
|
|
|
|
|
|
|
[quagga-dev 843]
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
from vtysh ([quagga-dev 932]).
|
|
* ospf_abr.c: (ospf_abr_update_aggregate) UNH 3.12b,c, address range
should be configured with the highest cost path within the range,
not lowest.
|
|
* ospf_zebra.c: (ospf_interface_delete) Do not delete the interface
params, nor the interface structure, if an interface delete
message is received from zebra.
* ospf_interface.c: (ospf_if_delete_hook) Delete the interface
params and interface, ie that which was previously removed in
(ospf_interface_delete) above.
|
|
checking.
|
|
more. I'm not sure if this read should be attempted at all, but I'm trying
to keep code safe AND stable.
|
|
|
|
* tests/test-sig.c: New file, regression test for sigevents.
* lib/Makefile.am: add sigevent.{c,h}
* (isis|rip|ripng|ospf|ospf6|bgp)d/\1_main.c: modify for sigevents.
* zebra/main.c: ditto.
|
|
Use pkginclude_HEADERS rather than include_HEADERS to place includes
in ${prefix}/include/quaggainstead of polluting ${prefix}/include.
|
|
* ospf_packet.c: (ospf_recv_packet) OpenBSD now leaves iph.ip_len
network byte order. (bugzilla #67).
|
|
* ospfd/ospf_flood.c: (ospf_flood_through_interface) fix compile
warning.
|
|
while trying not to change semantics. Add ifdefed-out code to
avoid matching ppp interfaces whose destination address does not
also match the prefix under consideration, to help out people with
problems due to as-yet-unfixed bugs with p2p interfaces coming and
going.
|
|
files, defaulting to sysconfdir (matching previous behavior).
This is needed to support (cleanly) NetBSD pkgsrc, which requires that
example config files go in $(prefix)/share/examples/pkgname, rather
than in $(prefix)/etc/pkgname.
|
|
* ospfd/ospf_interface.c: (ospf_if_table_lookup) grab reference to
rn->info /before/ calling route_unlock_node() as some systems
may deliberately poison freed memory, eg FreeBSD 5.1.
see [quagga-dev 417].
|
|
* ospfd/ospfd.c: if_is_pointopoint() takes (struct interface *), was
being called with struct connected. Change to co->ifp.
|
|
* ospfd/ospfd.c: Do not increment act_int for an area, as it is done
by ospf_ism.c::ism_change_state() - results in incorrect figure
for active interfaces in an area.
|
|
* configure.ac: Check for fcntl()
* {bgpd,ospf,ospf6d,ripd,ripngd}/Makefile.am: Install conf file via
regular automake means, not magic install incantations, see
bug #38.
* lib/Makefile.am: install the headers, needed to link libzebra.a
(and hence libospf.a, OSPF-API, etc.)
|
