summaryrefslogtreecommitdiff
path: root/ospfd
AgeCommit message (Collapse)Author
2006-01-10[ospfd] fix undefined effect expressionpaul
2006-01-10 Juris Kalnins <juris@mt.lv> * ospf_packet.c: (ospf_make_md5_digest) fix odd, if not undefined effect, assignment of an increment expression.
2006-01-10[ospfd] fix rare leak of struct connected, in an error path.paul
2006-01-10 Juris Kalnins <juris@mt.lv> * ospf_zebra.c: (ospf_interface_address_delete) fix rare leak of struct connected in an error case.
2006-01-10[ospfd] trim redundant stringspaul
2006-01-10 Paul Jakma <paul.jakma@sun.com> * ospf_vty.c: (config_write_ospf_distribute) trim down redundant strings.
2006-01-10[ospfd] fix automatic router-id and network enable bug.paul
2006-01-10 Paul Jakma <paul.jakma@sun.com> * ospfd.c: (ospf_network_run) checking to see if router-id is set should be on ospf->router_id, not router_id_static. This was causing ospfd to not start if router-id had not been configured statically. (ospf_if_update) ditto.
2005-11-26[ospfd] rename graceful to deferred, fix a tiny compile warning.paul
2005-11-26 Paul Jakma <paul.jakma@sun.com> * (general) s/graceful/deferred/ in all files, the former term is confusing wrt OSPF Graceful-Restart. * ospfd.c: (ospf_deferred_shutdown_check) dont return a function which returns void. SOS complains about this. (ospf_finish)
2005-11-26[c99] change gcc zero-length array to C99 flexible array declarationpaul
2005-11-26 Paul Jakma <paul.jakma@sun.com> * buffer.c: (struct buffer_data) change gcc zero array declaration to C99 incomplete array. * stream.h: (struct stream) same * ospf_api.c: (struct opaque_lsa) same
2005-11-202005-11-20 Paul Jakma <paul.jakma@sun.com>paul
* ospf_abr.c: (ospf_abr_announce_network_to_area) check returned LSA of ospf_summary_lsa_refresh and print warning if it failed. (ospf_abr_announce_network_to_area) similar (ospf_abr_announce_rtr_to_area) similar * ospf_lsa.c: (ospf_router_lsa_new) check LSA returned is valid. (ospf_router_lsa_originate) similar (ospf_router_lsa_refresh, ospf_network_lsa_new) similar (ospf_summary_lsa_new) Check ID is valid. (ospf_summary_lsa_originate) ditto, and check returned LSA from previous function is !NULL. (ospf_summary_lsa_refresh) check ospf_summary_lsa_new return is !NULL. (ospf_summary_asbr_lsa_new) ID valid check. (ospf_summary_asbr_lsa_originate) similar.
2005-11-202005-11-20 Paul Jakma <paul.jakma@sun.com>paul
* ospfd.h: remove the OSPF_ROUTER_ID_UPDATE_DELAY define (struct ospf) remove the router_id timer thread. remove export of ospf_router_id_update_timer. * ospfd.c: (ospf_router_id_update) call ospf_if_update to poke interfaces into action after ID has been configured. (ospf_router_id_update_timer) removed. (ospf_finish_final) t_router_id_update timer is gone. (ospf_network_run) router-id update timer gone. call ospf_router_id_update directly if ID not configured. In the per-iface loop, don't ospf_if_up interfaces if ID is still not configured. The update function will call ospf_if_update anyway. (ospf_if_update) ID update timer is gone. Just return if no ID is set. * ospf_vty.c: (ospf_router_id) call ospf_router_id_update, no timer needed. * ospf_zebra.c: (ospf_router_id_update_zebra) call ospf_router_id_update directly, not via timer.
2005-11-16[ospfd] Standardize buffer sizes used for displaying timers.ajs
2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_dump.h: Define OSPF_TIME_DUMP_SIZE as appropriate buffer size for use with ospf_timer_dump and ospf_timeval_dump. * ospf_vty.c: Change all buffer sizes used with ospf_timer_dump and ospf_timeval_dump to have size OSPF_TIME_DUMP_SIZE. (show_ip_ospf_interface_sub) Fix possible buffer overflow in call to ospf_timer_dump.
2005-11-16[ospfd] Make OSPF_ISM_TIMER_OFF macro safer.ajs
2005-11-16 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ospf_ism.h: (OSPF_ISM_TIMER_OFF) Improve macro syntax by enclosing in 'do {...} while(0)'.
2005-11-14[ospfd] misc small fixes. Fix default stub router setting. no opaque compile.paul
2005-11-14 Paul Jakma <paul.jakma@sun.com> * ospfd.c: (ospf_new) stub-shutdown should just default to unconfigured, too strange otherwise. (ospf_finish_final) t_opaque_lsa_self TIMER_OFF should be preprocessor conditional on HAVE_OPAQUE_LSA. * ospfd.h: (struct ospf) remove the SHUTDOWN_DEFAULT define. no longer used, plus it wasn't in range that the command accepted. * ospf_zebra.h: Depends on vty.h, include it.
2005-11-11[ospfd] SPF ospf_canonical_nexthops_free bugfix.paul
2005-11-042005-11-04 Paul Jakma <paul.jakma@sun.com>paul
* ospf_{dump,spf,vty}.c: Oops, use the internal tv_sub function rather than unportable timersub.
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* ospf_packet.c: Change level of some warnings to informational.
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* ospf_apiserver.c: (apiserver_sync_callback) stray semi-colon * ospf_packet.c: include checksum.h, remove the in_cksum extern * prototypes. * ospf_te.h: Add braces, quell warning.
2005-10-292005-10-29 Paul Jakma <paul.jakma@sun.com>paul
* (general) RFC3137 stub-router support * ospfd.h: Add OSPF_OUTPUT_COST_INFINITE define. (struct ospf_master) Add a OSPF_MASTER_SHUTDOWN flag for options, to allow shutdown to distinguish between complete shutdown and shutdown of a subset of ospf instances. (struct ospf) Add stub_router_{startup,shutdown_}time, configuration of startup and shutdown time for stub-router. Add t_graceful_shutdown struct thread, timer for graceful shutdown, if needed. (struct ospf_area) Add stub_router_state - run time state of stub-router for an area. Add flags for ADMIN, IS and WAS states. Add t_stub_router, timer thread to resend router-lsa for an area. * ospf_lsa.c: (ospf_link_cost) new simple function to spit out either the given lnks cost or infinite cost if stub-router is in effect. (lsa_link_{ptop,broadcast,virtuallink,ptomp}_set) use previous function for transit-links. (ospf_stub_router_timer) timer thread for end of startup stub router. Change state as required for the area and setup re-origination of router-lsa. (ospf_stub_router_check) Check/do whether stub-router should be enabled, and whether it requires timer to be setup. (ospf_router_lsa_new) call previous function at top. (ospf_router_lsa_originate) no external callers, made static. * ospf_lsa.h: (ospf_router_lsa_originate) removed. * ospf_main.c: (sigint) make static. remove call to exit, as ospf_terminate now deals with exiting. * ospf_route.c: (ospf_terminate) removed, now in ospfd.c. * ospf_vty.c: (show_ip_ospf_area) print out state of stub-router, if active. (show_ip_ospf) print out configuration of stub-router support, and details of graceful-shutdown if the timer is active. ((no)?ospf_max_metric_router_lsa_{admin,startup,shutdown}) new commands to (de-)?configure stub-router support. (config_write_stub_router) write out config of stub-router. (ospf_config_write) call previous. (ospf_vty_init) install the new stub-router commands. * ospfd.c: various functions made static. (ospf_new) Set defaults for stub-router. Graceful shutdown is made to default on, just to be adventerous. (ospf_graceful_shutdown_finish) new function, final part of shutdown. (ospf_graceful_shutdown_timer) timer thread wrapper for graceful-shutdown. (ospf_graceful_shutdown_check) check whether to setup timer for shutdown or proceed directly to final shutdown. (ospf_terminate) moved here from ospf_route.c, call ospf_finish for each instance. (ospf_finish) renamed to ospf_finish_final and made static. (ospf_finish) new function, exported wrapper around ospf_graceful_shutdown_check. (ospf_finish_final) complete shutdown of an instance. Add missing TIMER_OFF's of two timer threads. (ospf_area_free) opaque self lsa timer should be turned off.
2005-10-232005-10-23 Paul Jakma <paul.jakma@sun.com>paul
* ospf_apiserver.c: (ospf_apiserver_term) This function should not have side-effects (eg segv) if no apiserver instances are active, ie be robust.
2005-10-232005-10-23 Paul Jakma <paul.jakma@sun.com>paul
* ospf_vty.c: (show_ip_ospf) fix display of SPF timer if it has not yet been run.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* ospf_dump.c: (ospf_timeval_dump) fix ms adjustment, thanks to Andrew Schorr. * ospf_vty.c: (ospf_config_write) fix write out of spf timers configuration.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) SPF millisecond resolution timer with adaptive, linear back-off holdtime. Prettification of ospf_timer_dump. * ospf_dump.c: (ospf_timeval_dump) new function. The guts of ospf_timer_dump, but made to be more dynamic in printing out the relative timeval, sliding the precision printed out according to the value. (ospf_timer_dump) guts moved to ospf_timeval_dump. * ospf_dump.h: export ospf_timeval_dump. * ospf_flood.c: (ospf_flood) remove gettimeofday, use the libzebra exported recent_time instead, as it's not terribly critical to have time exactly right - the dropped LSA will be retransmited to us if we don't ACK it. * ospf_packet.c: (ospf_ls_upd_timer) Ditto, but here we're not transmitting, just putting LSA back on update transmit list. * ospfd.h: delay and holdtimes should be unsigned. Add spf_max_holdtime and spf_hold_multiplier. Update default defines for delay and hold time to be in msec. (struct ospf) change the SPF timestamp to a struct timeval. Remove ospf_timers_spf_(un)?set. * ospfd.c: (ospf_timers_spf_{set,unset}) removed. (ospf_new) initialise spf_max_holdtime and spf_hold_multiplier * ospf_spf.c: (ospf_spf_calculate) SPF timestamp is a timeval now, update with gettimeofday. (ospf_spf_calculate_schedule) Change SPF timers to millisecond resolution. Make the holdtime be adaptive, with a linear increase in holdtime ever consecutive SPF run which occurs within holdtime of previous SPF, bounded by spf_max_holdtime. * ospf_vty.c: Update spf timers commands. (ospf_timers_spf_set) trivial helper. (ospf_timers_throttle_spf_cmd) new command to set SPF delay, initial hold and max hold times with millisecond resolution. (ospf_timers_spf_cmd) Deprecated. Accept the old values, convert to msec, truncate to new limits. (no_ospf_timers_throttle_spf_cmd) set timers to defaults. (no_ospf_timers_spf_cmd) deprecated form, same as previous. (show_ip_ospf_cmd) Display SPF parameters and times. (show_ip_ospf_neighbour_header) Centralise the 'sh ip os ne' header. (show_ip_ospf_neighbor_sub) Fix the field widths. Get rid of the multiple spaces which were making the lines even longer. (show_ip_ospf_neighbor_cmd) Use show_ip_ospf_neighbour_header (show_ip_ospf_neighbor_all_cmd) ditto and fix the field widths for NBMA neighbours. (show_ip_ospf_neighbor_int) Use header function. (show_ip_ospf_nbr_nbma_detail_sub) use sizeof for timebuf, local array - safer. (show_ip_ospf_neighbor_detail_sub) ditto (ospf_vty_init) install the new SPF throttle timer commands.
2005-10-212005-10-21 Paul Jakma <paul.jakma@sun.com>paul
* (general) OSPF fast, sub-second hello and 1s dead-interval support. A warning fix. Millisec support for ospf_timer_dump. Change auto-cost ref-bandwidth to add a comment to write out of config, rather than printing annoying messages to vty on startup. * ospf_dump.c: (ospf_timer_dump) Print out milliseconds too. Callers typically specify a length of 9, so most see millisecs unless they specify the additional length. * ospf_interface.h: (struct ospf_interface) new interface param, fast_hello. * ospf_interface.c: (ospf_if_table_lookup) add brackets, gcc warning fix. (ospf_new_if_params) Initialise fast_hello param. (ospf_free_if_params) Check whether fast_hello is configured. (ospf_if_new_hook) set fast_hello to default. * ospf_ism.h: Wrap OSPF_ISM_TIMER_ON inside do {} while (0) to prevent funny side-effects from its if statement when this macro is used conditionally by other macros. (OSPF_ISM_TIMER_MSEC_ON) new macro, set in milliseconds. (OSPF_HELLO_TIMER_ON) new macro to set hello timer according to whether fast_hello is set. * ospf_ism.c: Update all setting of the hello timer to use either OSPF_ISM_TIMER_MSEC_ON or OSPF_HELLO_TIMER_ON. The former is used when hello is to be sent immediately. * ospf_nsm.c: ditto * ospf_packet.c: (ospf_hello) hello-interval is not checked for mismatch if fast_hello is set. (ospf_read) Annoying nit, fix "no ospf_interface" to be debug rather than a warning, as it can be perfectly normal to receive packets when logical subnets are used. (ospf_make_hello) Set hello-interval to 0 if fast-hellos are configured. * ospf_vty.c: (ospf_auto_cost_reference_bandwidth) annoying nit, don't vty_out if this command is given, it gets tired quick. (show_ip_ospf_interface_sub) Print the hello-interval according to whether fast-hello is set or not. Print the extra 5 millisec characters from (ospf_timer_dump) if fast-hello is configured. (ospf_vty_dead_interval_set) new function, common to all forms of dead-interval command, to set dead-interval and fast-hello correctly. If a dead-interval is given, unset fast-hello, else if a hello-multiplier is set, set dead-interval to 1 and fast-hello to given multiplier. (ip_ospf_dead_interval_addr_cmd) use ospf_vty_dead_interval_set(). (ip_ospf_dead_interval_minimal_addr_cmd) ditto. (no_ip_ospf_dead_interval) Unset fast-hello. (no_ip_ospf_hello_interval) Bug-fix, unset of hello-interval should set it to OSPF_HELLO_INTERVAL_DEFAULT, not OSPF_ROUTER_DEAD_INTERVAL_DEFAULT. (config_write_interface) Write out fast-hello. (ospf_config_write) Write a comment about "auto-cost reference-bandwidth" having to be equal on all routers. Hopefully just as noticeable as old practice of writing to vty, but less annoying. (ospf_vty_if_init) install the two new dead-interval commands. * ospfd.h: Add defines for OSPF_ROUTER_DEAD_INTERVAL_MINIMAL and OSPF_FAST_HELLO_DEFAULT.
2005-10-182005-10-18 Paul Jakma <paul.jakma@sun.com>paul
* (general) SPF memory management cleanup and fix for rare double-free bug. * ospf_spf.h: (struct vertex_parent) New struct to hold parent specific data, eg the backlink and the parent vertex pointer, and point to the appropriate general struct vertex_nexthop. (struct vertex_nexthop) remove parent vertex pointer, so this struct can be shared across vertices. (struct vertex) rename list child to list children. Remove list of nexthops, replace with list of vertex_parents. * ospf_spf.c: (update_stat) trivial, remove cast from void *. (vertex_nexthop_new) remove init of parent - field is gone from struct vertex_nexthop. (ospf_canonical_nexthops_free) Remove the canonical vertex_nexthop memory objects. These are the vertex_nexthops attached to the first level of router vertices from the root. (vertex_parent_new) new function, create a vertex_parent. (vertex_parent_free) ditto, but free it. (ospf_vertex_new) Update to match changes to struct vertex. (ospf_vertex_free) Recursively free a struct vertex and its children. The parent list is used as a reference count. vertex_nexthops must be free seperately, if required. (ospf_vertex_dump) update to match struct vertex changes. Print out backlink of parents too. (ospf_vertex_add_parent) ditto. (ospf_lsa_has_link) update comment. (ospf_nexthop_add_unique) removed, not needed anymore. (ospf_nexthop_merge) ditto. (ospf_spf_consider_nexthop) renamed to ospf_spf_add_parent. Simplified to just create vertex_parent and add it. (ospf_spf_flush_parents) new function, flush out the parent list. (ospf_nexthop_calculation) Take the relevant route_lsa_link as an argument, which simplifies things and removes the need for the hack in ospf_nexthop_add_unique - ospf_spf_next already knew exactly which link the cost calculated was for. Update to match struct vertex changes too. (ospf_spf_next) Don't create a vertex for W unnecessarily, if it's there's a vertex already created for W, use it, and hence there's no need to free it either. Update some manipulation/comparisons of distance to match. Flush the parent list if a lower cost path is found. (ospf_spf_route_free) unused, removed. (ospf_spf_dump) match the struct vertex changes, and dump the ifname if possible. (ospf_spf_calculate) At end of SPF, free the canonical nexthops and call ospf_vertex_free on the root vertex to free the entire tree. * ospf_interface.c: (ospf_vl_set_params) match struct vertex changes. * ospf_route.c: (ospf_intra_route_add) ditto (ospf_route_copy_nexthops_from_vertex) ditto * memtypes.c: (memory_list_ospf) Add MTYPE_OSPF_VERTEX_PARENT.
2005-10-112005-10-11 Paul Jakma <paul.jakma@sun.com>paul
* ospf_api.c: sign warnings. * ospf_apiserver.c: sign warning and convert all the struct in_addr initialisations so as not to make assumptions about how this struct is organised, initialise the s_addr member explicitely. * ospf_packet.c: Add const qualifier to auth_key.
2005-10-062005-10-06 Alain Ritoux <alain.ritoux@6wind.com>vincent
* ospf_snmp.c: Avoid mixing interface and ospf_interface objects which now allows snmpwalk to work with ospfIfTable and also with ospfIfMetricTable
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
2005-10-012005-09-30 Vincent Jardin <vincent.jardin@6wind.com>jardin
* ospf_dump.c, ospf_ia.c, ospf_spf.c, ospf_ase.c: remove unused DEBUG
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/smux.[ch]: allow to retreive global OID (identified by <0 namelen). * ospf_ism.c: generate SNMP traps on Interface state change * ospf_nsm.c: generate SNMP traps on Neighbour state change * ospf_snmp.[ch]: support for SNMP traps for interface and neighbours.
2005-09-292005-09-29 Paul Jakma <paul.jakma@sun.com>paul
* configure.ac: Add the test for Solaris least-privileges. Set defines for whether capabilities are supported and whether of the linux or solaris variety. Add missing-prototypes, missing-declarations, char-subscripts and cast-qual warnings to default cflags, cause Hasso enjoys warnings, and we really should clean the remaining ones up. (ie isisd..). * (*/*main.c) Update the zebra_capabilities_t arrays in the various daemons to match the changes made in lib/privs.h. * zebra.h: Solaris capabilities requires priv.h to be included. * privs.{c,h}: Add support for Solaris Least-Privileges. privs.h: Reduce some of the abstract capabilities, which do not have rough equivalents on both systems. Rename the net related caps to _NET, as they should have been in first place. (zprivs_terminate) should take the zebra_privs_t as argument so that it can update change pointer. Add an additional privilege state, ZPRIVS_UNKNOWN. * privs.c: (various capability functions) Add Solaris privileges variants. (zprivs_state) Use privs.c specific generic types to represent various capability/privilege related types, so that each can be typedef'd as appropriate on each platform. (zprivs_null_state) static added, to hold the state the null method should report (should be raised by default, and LOWERED if zprivs_terminate has been called) (zprivs_state_null) Report back the zprivs_null_state. (cap_map) Make it able to map abstract capability to multiple system capabilities. (zcaps2sys) Map to abstract capabilities to multiple system privileges/capabilities. (zprivs_init) move capability related init to seperate function, zprivs_caps_init. (zprivs_terminate) ditto, moved to zprivs_caps_terminate. Set the change_state callback to the NULL state, so the user can continue to run and use the callbacks.
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* Of course ISM_SNMP MACRO mist be defined
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* ospfd/ospf_vty.c: forece default route LSA to be re_issued whenever cost is changed ( [no] ip ospf area XXX default-cost YYY) Support ignore-mtu option * ospfd/ospfd.h: define OSPF_MTU_IGNORE_DEFAULT * ospfd/ospf_packet.c: support ignore-mtu option * ospfd/ospf_interface.h: field added for skipping MTU check * ospfd/ospf_interface.c: fix memory leak in ospf_crypt_key_delete() Set mtu_ignore field to default value * ospfd/ospf_abr.[ch]: export ospf_abr_announce_network_to_area() * ospfd/ospf_ism.h: add MACRO to convert internal ISM status into SNMP correct values * ospfd/ospf_snmp.c: add sanity check on LSA type in lsdb_lookup_next() convert OSPFIFSTATE internal status into SNMP values
2005-09-282005-09-28 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/md5-gnu.h: removed * lib/md5.h: replaces md5-gnu.h * lib/Makefile.am: use correct md5.h * lib/md5.c: import from WIDE * ospfd/ospf_packet.c: use new md5 API * ripd/ripd.c: use new md5 API
2005-09-192005-09-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_lsa.h: (ospf_external_lsa_flush) Comment out the 5th argument (nexthop) since it is not used in the function (except inside some commented-out code). * ospf_lsa.c: (ospf_external_lsa_flush,ospf_external_lsa_refresh) Comment out the 5th argument to ospf_external_lsa_flush. * ospf_asbr.c: (ospf_redistribute_withdraw) Comment out 5th arg to ospf_external_lsa_flush. * ospf_vty.c: (no_ospf_default_information_originate) Eliminate 5th uninitialized nexthop arg to ospf_external_lsa_flush. * ospf_zebra.c: (ospf_zebra_read_ipv4) Comment out 5th arg to ospf_external_lsa_flush. * ospfd.c: (ospf_network_set) Comment out 5th arg to ospf_external_lsa_flush.
2005-09-172005-09-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ospf_opaque.c: (ospf_opaque_lsa_refresh_schedule,ospf_opaque_lsa_flush_schedule) No need to call ospf_lookup(), just use lsa0->area->ospf instead.
2005-08-21 * ospf_vty.c: Make "show ip ospf neighbor xxx" commands work.hasso
Interface should be specified by name now. [backport candidate]
2005-08-17 * ospf_vty.c: Check carefully if interface exists before trying tohasso
print info about it. Fixes bugzilla #213. [backport candidate]
2005-08-05 * ospf_zebra.c: Don't assert/stop before type == ZEBRA_ROUTE_MAX ifhasso
dealing with routemaps. There is ospf->route_map[ZEBRA_ROUTE_MAX] for default-information. Fixes bugzilla #208. [backport candidate]
2005-07-262005-07-26 Paul Jakma <paul.jakma@sun.com>paul
* ospf_abr.c: (ospf_abr_announce_network_to_area) SET_FLAG should be on lsa not old, which may be freed for one thing, obviously.
2005-07-122005-07-12 Paul Jakma <paul.jakma@sun.com>paul
* ospfd.h: add OSPF_ABR_DEFAULT for convenience, make OSPF_ABR_CISCO be the default ABR type. * ospfd.c: (ospf_new) initialise abr_type to OSPF_ABR_DEFAULT * ospf_vty.c: (no_ospf_abr_type_cmd) add standard as a negatable abr_type. default abr_type should be OSPF_ABR_DEFAULT. (ospf_config_write) test whether default abr_type against OSPF_ABR_DEFAULT, rather than any specific ABR_TYPE.
2005-06-20Fix date.hasso
2005-06-20 * ospf_nsm.c: Make database exchange for NSSA database work.hasso
[backport candidate]
2005-06-132005-06-13 Paul Jakma <paul.jakma@sun.com>paul
* ospf_spf.c: Try get more information on a SEGV under ospf_spf_vertex_add_parent. (ospf_vertex_free) NULL out the child and nexthop lists (ospf_vertex_add_parent) nexthop and child can not be NULL vertex_nexthop's parent->child list can not be NULL (ospf_spf_next) w and cw are per-loop iteration variables, move declarations into loop body.
2005-06-07 * ospf_apiserver.c: Fix obvious error in notifying clients about ISMhasso
changes - oi->ifp->status doesn't give to us info about ISM, oi->state does. [backport candidate]
2005-06-012005-06-01 Akihiro Mizutani <mizutani@net-chef.net>paul
* ospf_ism.c (ospf_elect_bdr/ospf_elect_dr): Fix DR election bug.
2005-05-262005-05-26 Paul Jakma <paul.jakma@sun.com>paul
* ospf_abr.c: (ospf_abr_update_aggregate) Fix comment, cost bug itself had been fixed long ago by Sowmini.
2005-05-182005-05-19 Paul Jakma <paul.jakma@sun.com>paul
* ospf_interface.c: (ospf_if_table_lookup) Fix a serious bug a less serious one. 1: this function is supposed to lookup entries in the oifs ospf_interface route_table and return either an existing oi or NULL to indicate not found, its caller depends on this, yet this function uses route_node_get which /always/ returns a route_node - one is created if none exists. Use route_node_lookup instead. This should fix root cause of the reports of the (ospf_add_to_if) assert being hit. 2: oi's are inserted into this table with prefixlength set to /32 (indeed, it should be a hash table, not a route_table), however prefixlength to lookup was not changed, if no valid entry can be inserted other than /32, then nothng but /32 should be looked up. This possibly only worked by fluke.. Fix confirmed by 2 reporters (one list, one IRC), definitely a backport candidate once it has been incubated in HEAD for a while. Thanks to Patrick Friedel and Ivan Warren for testing.
2005-05-112005-05-11 Paul Jakma <paul.jakma@sun.com>paul
* (general) Fix memory leaks in opaque AS-scope LSAs, reported and with much debugging done by by scott collins <scollins@agile.tv>. (possible backport candidate?) * ospf_lsa.c: (ospf_discard_from_db) dont call ospf_ase_unregister_external_lsa for opaque-lsa's, opaques are never registered with ase in the first place. * ospf_packet.c: (general) Disabuse opaque related code of its tendency to try gather up things into temporary lists. (ospf_ls_upd) remove the temporary lists opaque uses, call opaque functions inline, just like all other types. (ospf_ls_ack) ditto. (ospf_recv_packet) fixup sign warning. * ospf_opaque.c: (general) fix the unneeded use of lists, and untwist some of the logic. (ospf_opaque_self_originated_lsa_received) take a single LSA as argument, not a list of them. Remove the list loop. Logic otherwise unchanged. (ospf_opaque_ls_ack_received) Mostly ditto. But untwist the logic, move the actions up into the switch block, remove the goto's and sanitise the logic near the end a bit. * ospf_opaque.h: Adjust definitions of aforementioned functions in ospf_opaque.c to match.
2005-05-072005-05-07 Yar Tikhiy <yar@comp.chem.msu.su>paul
* configure.ac: Check for OSes which support passing ifindex in struct ip_mreq. * lib/sockopt.c: Add support for BSD style ifindex in ip_mreq. * ospfd/ospf_network.c: Log ifindex on multicast membership leave/join events.
2005-05-062005-05-06 Paul Jakma <paul.jakma@sun.com>paul
* (general) extern and static qualifiers added. unspecified arguments in definitions fixed, typically they should be 'void'. function casts added for callbacks. Guards added to headers which lacked them. Proper headers included rather than relying on incomplete definitions. gcc noreturn function attribute where appropriate. * ospf_opaque.c: remove the private definition of ospf_lsa's ospf_lsa_refresh_delay. * ospf_lsa.h: export ospf_lsa_refresh_delay * ospf_packet.c: (ospf_make_md5_digest) make *auth_key const, correct thing to do - removes need for the casts later. * ospf_vty.c: Use vty.h's VTY_GET_INTEGER rather than ospf_vty's home-brewed versions, shuts up several warnings. * ospf_vty.h: remove VTY_GET_UINT32. VTY_GET_IPV4_ADDRESS and VTY_GET_IPV4_PREFIX moved to lib/vty.h. * ospf_zebra.c: (ospf_distribute_list_update_timer) hacky overloading of the THREAD_ARG pointer should at least use uintptr_t.
2005-04-152005-04-15 Zhipeng Gong <zpgong@cdc.3upsystems.com>paul
* ospf_abr.c: (ospf_abr_announce_network_to_area) dont forget to approve LSAs for the case where metric has changed, lsa gets flushed otherwise. (backport candidate).
2005-04-112005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Implement non-blocking zclient I/O with buffering. * zclient.h (struct zclient): Add two fields to support non-blocking I/O: struct buffer *wb, and struct thread *t_write. (zclient_free): Remove function. (zebra_redistribute_send): Change 2nd arg from socket fd to struct zclient * (needed to support non-blocking I/O and buffering). (zclient_send_message): New function to send an arbitrary message with non-blocking I/O. * zclient.c (zclient_new): Create write buffer. (zclient_free): Remove unused function. (zclient_stop): Must cancel new t_write thread. Also, reset all buffers: ibuf, obuf, and wb. (zclient_failed): New helper function for typical error handling. (zclient_flush_data): New thread to flush queued data. (zclient_send_message): New function to send the message in zclient->obuf to zebra using non-blocking I/O and buffering. (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use new zclient_send_message function instead of calling writen. (zclient_start): Set socket non-blocking. Also, change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. (zebra_redistribute_send): Change 2nd arg to struct zclient *. Can now use zclient->obuf to assemble the message instead of allocating a temporary stream. And call zclient_send_message to send the message instead of writen. (zclient_read): Convert to support non-blocking I/O by using stream_read_try instead of deprecated stream_read. (zclient_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead of writen. * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset): The 2nd arg to zebra_redistribute_send is now zclient instead of zclient->sock. * isis_zebra.h (isis_zebra_finish): Remove declaration of unused function. * isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message to send the message to zebra instead of calling writen directly, since zclient_send_message understands non-blocking I/O and will manage the buffer queue appropriately. (isis_zebra_finish): Remove unused function, particularly since the zclient_free function has been removed.