| Age | Commit message (Collapse) | Author |
|---|
|
* ripd.c: (rip_create_socket) Make it static.
Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP
port messages should be discarded, quagga doesnt accept them,
no need to lookup port.
Take a 'to' argument, if socket should be bound to something else.
setsockopt_so_recvbuf might need privs, move it to the raised
privileges section.
dont forget to close the socket if bind fails.
(rip_send_packet) use strncpy, just in case (address is under
our control anyway, but still).
dont duplicate rip_create_socket - just use it.
(rip_create) rip_create_socket takes an argument now, modify.
|
|
* ripd.c: (rip_create_socket) move it up so rip_send_packet
can use it too.
|
|
* rip_interface.c: Fix authentication, no-auth impossible to specify
(rip_interface_new) default to RIP_NO_AUTH
(rip_interface_reset) ditto
(rip_interface_config_write) write out config for simple
|
|
* ripd.c: (rip_output_process) fix error which crept in my
previous rip auth untanglement commit - it had become impossible
to not have authentication (even for v1).
|
|
[backport candidate]
|
|
address as nexthop in routemap.
Fixes bugzilla #186. [backport candidate]
|
|
in and out interfaces.
Fixes bugzilla #185. [backport candidate]
|
|
* rip_interface.c (rip_interface_add): Need to call
rip_passive_interface_apply (was already calling it in
rip_interface_up).
[backport candidate]
|
|
Implement non-blocking zclient I/O with buffering.
* zclient.h (struct zclient): Add two fields to support non-blocking
I/O: struct buffer *wb, and struct thread *t_write.
(zclient_free): Remove function.
(zebra_redistribute_send): Change 2nd arg from socket fd to
struct zclient * (needed to support non-blocking I/O and buffering).
(zclient_send_message): New function to send an arbitrary
message with non-blocking I/O.
* zclient.c (zclient_new): Create write buffer.
(zclient_free): Remove unused function.
(zclient_stop): Must cancel new t_write thread. Also, reset
all buffers: ibuf, obuf, and wb.
(zclient_failed): New helper function for typical error handling.
(zclient_flush_data): New thread to flush queued data.
(zclient_send_message): New function to send the message in
zclient->obuf to zebra using non-blocking I/O and buffering.
(zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use
new zclient_send_message function instead of calling writen.
(zclient_start): Set socket non-blocking. Also, change 2nd arg
to zebra_redistribute_send from zclient->sock to zclient.
(zebra_redistribute_send): Change 2nd arg to struct zclient *.
Can now use zclient->obuf to assemble the message instead of
allocating a temporary stream. And call zclient_send_message to
send the message instead of writen.
(zclient_read): Convert to support non-blocking I/O by using
stream_read_try instead of deprecated stream_read.
(zclient_redistribute): Change 2nd arg to zebra_redistribute_send
from zclient->sock to zclient.
* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):
Change 2nd arg to zebra_redistribute_send from zclient->sock
to zclient.
* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead
of writen.
* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,
rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send
from zclient->sock to zclient.
* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):
Change 2nd arg to zebra_redistribute_send from zclient->sock
to zclient.
* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):
The 2nd arg to zebra_redistribute_send is now zclient instead of
zclient->sock.
* isis_zebra.h (isis_zebra_finish): Remove declaration of unused
function.
* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message
to send the message to zebra instead of calling writen directly, since
zclient_send_message understands non-blocking I/O and will manage
the buffer queue appropriately.
(isis_zebra_finish): Remove unused function, particularly since
the zclient_free function has been removed.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
* ripd.c: Untangle the construction of RIP auth data.
(rip_auth_prepare_str_send) new helper function, prepare
correct key string.
(rip_auth_simple_write) new helper, write out the
rip simple password auth psuedo-RTE.
(rip_auth_md5_ah_write) new helper, write out the
MD5 auth-header psuedo-RTE.
(rip_auth_header_write) new helper, write out correct
auth header data / psuedo-RTE.
(rip_auth_md5_set) rip out the memmove and writing of the
auth header psuedo-RTE. So that all that is left is to
write the trailing auth digest, and update digest offset
field in the original header.
(rip_write_rte) rip out writing of RIP header, writing of
simple auth data psuedo-RTE. Make it do what its name suggests,
write out actual RTEs.
(rip_output_process) remove the incorrect additional decrements
of rtemax. Prepare the auth_str, which simple or MD5 auth will
need. Move write out of RIP header and auth data to inside the
loop. Adjust paramaters as required.
|
|
* daemon.c: (daemon) Replace perror with zlog_err.
* vty.c: (vty_serv_un) Replace perror with zlog_err.
* ripd.c: (rip_create_socket) Replace perror with zlog_err.
* ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with
zlog_err.
* ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with
zlog_err.
|
|
* ripd.c: (rip_create_socket) Save errno before calling
ripd_privs.change.
|
|
* configure.ac: Added test for broken CMSG_FIRSTHDR macro
(relevant for Solaris 8 and unpatched Solaris 9, don't know
whether other platforms are affected).
* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether
config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined
by the configure test program).
* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead
of CMSG_FIRSTHDR.
* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR
instead of CMSG_FIRSTHDR.
* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of
CMSG_FIRSTHDR.
|
|
* ripd.c: (rip_read) Improve 2 error messages to show the source of
the packet when the lookup fails.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
|
|
* ripd.c: Collapse redundant passing of various address structs,
struct interface and struct connected as arguments to functions
down to two key arguments, namely struct connected and, possibly,
address of source/destination. Testing for RIPv1 would be useful.
(rip_read) lookup struct connected for the received packet, pass
it on.
* rip_interface.c: With previous changes, we no longer have to tread
carefully with struct connected, as it will always be there and
valid.
|
|
ripd might need some more testing though.
|
|
initializes connection, and "no smux peer" command terminates it. Fixes
bugzilla #47 and #112.
|
|
|
|
|
|
|
|
|
|
* ripngd/ripngd.c: move setsockopt_so_recvbuf to lib.
* lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.
* ripd/ripd.c: set receive buffer to a decent size, some systems
have low defaults. Problem noted and fix suggested by Stephan
Schweizer in [zebra 20967].
|
|
* rip_interface.c: (rip_interface_multicast_set) get rid
of extraneous if_pointopoint arg. ifp is accessible via connected.
pass connected->ifp->ifindex to setsockopt_multicast_ipv4.
* ripd.c: (rip_send_packet) update call to
rip_interface_multicast_set
* ripd.h: update rip_interface_multicast_set prototype
|
|
* filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast
to u_char. (ipv6_access_list_remark_cmd) ditto.
if.c: ditto
* network.c: (readn/writen) pointer arg should be type u_char.
* plist.c: needs to include stream.h, not declare stream functions
internally.
(various) Add static qualifier to internal functions.
(prefix_list_type_str) extraneous breaks in switch statement.
(ip_prefix_list_description_cmd) buffer_putstr doesnt need cast
* stream.h: depends on plist.h and export stream_put_prefix
* vty.c: (vty_<telnet option build functions>) should use
unsigned char, telnet options are 0 -> 255.
* zclient.c: various u_char<->char type cleanups.
* zebra.h: Having to define CMSG_* can apply to more than just
BSDI_NRL.
* ripd.c: (rip_distribute_update_all) distribute list hook
function pointer prototype requires struct prefix_list * arg.
(rip_distribute_update_all_wrapper) update to pass required arg,
NULL.
|
|
* ripd.h: Add define for the RIPv2 Authentication Data family
Move the auth type defines up to where other defines live.
Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible
md5->auth_len size. Add md5_auth_len field to struct
rip_interface: (rip_interface_new) Init md5_auth_len to compatible
size.
(ip_rip_authentication_mode_cmd) Extended to handle setting
md5 auth-length. Appropriate aliases added.
(no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to
compatible size.
(rip_interface_config_write) Teach it about md5_auth_len.
_always_ write out the auth-length, so that everyone will get
the setting in their config file, and hence allow for a future
change of default for md5_auth_len to be less painful - every md5
user will have this setting in their config file.
ripd.c: (rip_packet_dump) Change nasty hard coded constants to
symbolic defines. Change various tests of 'ntoh.(variable) ==
constant' to test 'variable == ntoh.(constant)'. Clean up
indentation on some long lines.
(rip_auth_simple_password) ditto.
(rip_auth_md5) ditto, also add length argument and sanity check
md5 data offset field. Sanity check md5 auth length, accept RFC
or old-ripd/cisco lengths.
(rip_auth_md5_set) as per (rip_packet_dump), also write out
the configured md5 auth length for the interface (old-ripd or rfc)
(rip_read) as per (rip_packet_dump)
(rip_write_rte) ditto
(rip_response_process) ditto
(rip_write_rte) ditto
|
|
* ripd.c: Interoperability fix. Correct value for MD5 auth length
is 16. Accept packets with this set to >= 16, and set to 16
ourselves.
|
|
* ripd.c: Fixup compile warnings
* rip_routemap.c: Ditto
|
|
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes
(bgp_interface_address_delete) ditto.
(bgp_zebra_announce) ditto.
(bgp_zebra_withdraw) ditto.
* isis_zebra.c: Sync with zclient changes.
* zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe
message format.
* ospf6_zebra.c: Sync to zclient changes
* ospf_zebra.c: Sync with lib/zclient changes
* rip_zebra.c: sync with zclient changes.
* rip_interface.c: ditto.
* ripng_{interface,zebra}.c: sync with zclient changes
2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com>
* zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route
(zapi_ipv4_delete) ditto.
(zapi_ipv4_route) add/delete a route by way of cmd arg.
(zapi_ipv6_add) collapsed into zapi_ipv6_route.
(zapi_ipv6_delete) ditto.
(zapi_ipv6_route) add/delete a route by way of cmd arg.
(zebra_interface_address_delete_read) collapsed into
zebra_interface_address_read.
(zebra_interface_address_delete_read) ditto.
(zebra_interface_address_read) read address add/delete messages
by way of type argument. Describe command message format.
(zebra_interface_add_read) Unconditionally read new ifmtu6 field.
Describe command message format.
(zebra_interface_state_read) Unconditionally read new ifmtu6 field.
(zclient_redistribute_set) Collapsed into zclient_redistribute
(zclient_redistribute_unset) ditto
(zclient_redistribute) set/unset redistribution.
(zclient_redistribute_default_set) Collapsed into
zclient_redistribute_default.
(zclient_redistribute_default_unset) ditto.
(zclient_redistribute_default) Redistribute default set/unset.
* zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add
zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add
zclient_redistribute. Ditto for
zclient_redistribute_default_{set/unset}.
|
|
* ripd.c: (rip_update_jitter) Bound jitter to a more sensible
value, eg 1/4 of update time.
|
|
* ripd.c: (rip_rte_process) fix typo in merge of previous patch
and run function through indent.
|
|
* ripd.c: make ripd also check on administrative distance of his
own links to update routes.
|
|
|
|
|
|
|
|
* rip_interface.c: obsolete unbind code in
rip_interface_multicast_set, and instead do the more portable
(though slower) method of creating a socket for each outgoing packet
and binding the source address on the new socket.
* rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that
source address is determined by the caller of rip_request_send for
ripv1 packets and non-multicast interfaces (rip_request_send loops
over all connected address in all other cases).
* rip_send_packet: don't send packets with source set to
ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;
|
|
Subject: [zebra 12403] patch for ripd to accept any version of RIP
by default
The default Cisco IOS behavior is to send RIP version 1 packets and receive
version 1 and version 2 packets. But zebra version 0.92a sends and receives
only version 2 packets by default.
I have patched the code to change zebra's default behavior to sending
version 2 packets (same as before) but receiving both versions. While
this is still not identical to Cisco's behavior, it does now accept
packets of both versions and retains backwards compatibility with
zebra configurations.
|
|
|
|
|
|
|
