summaryrefslogtreecommitdiff
path: root/ripd/ChangeLog
AgeCommit message (Collapse)Author
2005-10-192005-10-17 Vincent Jardin <vincent.jardin@6wind.com>jardin
* ripd.c: rip_create_socket() for each packet, it does not bind to the proper interfaces because we forget to use the from address when it is specified.
2005-10-062005-10-06 Alain Ritoux <alain.ritoux@6wind.com>vincent
* rip_interface.c: Now the command "no ip rip split-horizon poisoned-reverse" just inhibates the poisoned-reverse effects but keep spli-horizon activ.
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/filer.c: show protocol name in filter_show() * lib/plist.c: show protocol name in vty_show_prefix_entry() * routemap.c: show protocol name in vty_show_route_map_entry() * lib/vty.c: in vty_command(), show protocol name if command unknown * zebra/zserv.c: Always provide distance fo route add * ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance with RFC. Also PeerDomain is now set to a STRING type. * ripd/ripd.h: rip_redistribute_add() API includes metric and distance * ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance Now allows a RIP-route to overcome a redistributed route coming from a protocol with worse (higher) administrative distance Metrics from redistribution are shown in show ip rip * ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. provide distance and metric * ripd/rip_interface.c: adapt to the rip_redistribute_add() API * ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage rather a CMD_WARNING, because set metric ius shared with other protocols using larger values (such as OSPF) The match metric action takes first external metric if present (from redistribution) then RIP metric.
2005-09-282005-09-28 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/md5-gnu.h: removed * lib/md5.h: replaces md5-gnu.h * lib/Makefile.am: use correct md5.h * lib/md5.c: import from WIDE * ospfd/ospf_packet.c: use new md5 API * ripd/ripd.c: use new md5 API
2005-08-162005-08-16 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: (general) Fix previous commit, broke multicast bind and hence setting of source port, which broke communication with non-borken ripd. Fix removes more stuff from rip_interface.c than it adds to ripd.c ;) (rip_create_socket) the to argument really is a from argument, rename it. Set the source port to RIP port unconditionally, it's required. (rip_send_packet) Set from address correctly for multicast. (rip_output_process) trivial: num can be BSS specified, rather than in body. * rip_interface.c: (rip_interface_multicast_set) strip out redundant stuff related to bind, which rip_create_socket does. Just make it set the multicast socket option, as per the interface concerned, no more.
2005-06-032005-06-03 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: (rip_create_socket) Make it static. Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP port messages should be discarded, quagga doesnt accept them, no need to lookup port. Take a 'to' argument, if socket should be bound to something else. setsockopt_so_recvbuf might need privs, move it to the raised privileges section. dont forget to close the socket if bind fails. (rip_send_packet) use strncpy, just in case (address is under our control anyway, but still). dont duplicate rip_create_socket - just use it. (rip_create) rip_create_socket takes an argument now, modify.
2005-06-032005-06-03 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: (rip_create_socket) move it up so rip_send_packet can use it too.
2005-06-022005-06-01 Paul Jakma <paul.jakma@sun.com>paul
* rip_interface.c: Fix authentication, no-auth impossible to specify (rip_interface_new) default to RIP_NO_AUTH (rip_interface_reset) ditto (rip_interface_config_write) write out config for simple
2005-05-292005-05-29 Paul Jakma <paul@dishone.st>paul
* ripd.c: (rip_output_process) fix error which crept in my previous rip auth untanglement commit - it had become impossible to not have authentication (even for v1).
2005-05-28Sync bgpd and ripd set_metric_addsub_cmd commands. Fixes bugzilla #192.hasso
[backport candidate]
2005-05-26 * rip_routemap.c: In case of '0.0.0.0' used as 'nexthop', use senderhasso
address as nexthop in routemap. Fixes bugzilla #186. [backport candidate]
2005-05-25 * rip_routemap.c: Make "match interface" routemap command match both -hasso
in and out interfaces. Fixes bugzilla #185. [backport candidate]
2005-05-112005-05-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* rip_interface.c (rip_interface_add): Need to call rip_passive_interface_apply (was already calling it in rip_interface_up). [backport candidate]
2005-04-112005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Implement non-blocking zclient I/O with buffering. * zclient.h (struct zclient): Add two fields to support non-blocking I/O: struct buffer *wb, and struct thread *t_write. (zclient_free): Remove function. (zebra_redistribute_send): Change 2nd arg from socket fd to struct zclient * (needed to support non-blocking I/O and buffering). (zclient_send_message): New function to send an arbitrary message with non-blocking I/O. * zclient.c (zclient_new): Create write buffer. (zclient_free): Remove unused function. (zclient_stop): Must cancel new t_write thread. Also, reset all buffers: ibuf, obuf, and wb. (zclient_failed): New helper function for typical error handling. (zclient_flush_data): New thread to flush queued data. (zclient_send_message): New function to send the message in zclient->obuf to zebra using non-blocking I/O and buffering. (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use new zclient_send_message function instead of calling writen. (zclient_start): Set socket non-blocking. Also, change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. (zebra_redistribute_send): Change 2nd arg to struct zclient *. Can now use zclient->obuf to assemble the message instead of allocating a temporary stream. And call zclient_send_message to send the message instead of writen. (zclient_read): Convert to support non-blocking I/O by using stream_read_try instead of deprecated stream_read. (zclient_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead of writen. * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset): The 2nd arg to zebra_redistribute_send is now zclient instead of zclient->sock. * isis_zebra.h (isis_zebra_finish): Remove declaration of unused function. * isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message to send the message to zebra instead of calling writen directly, since zclient_send_message understands non-blocking I/O and will manage the buffer queue appropriately. (isis_zebra_finish): Remove unused function, particularly since the zclient_free function has been removed.
2005-04-022005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Fix problems when netlink interfaces are renamed (same ifindex used for a new interface). Start cleaning up some problems with the way interface names are handled. * interface.c: (if_new_intern_ifindex) Remove obsolete function. (if_delete_update) After distributing the interface deletion message, set ifp->ifindex to IFINDEX_INTERNAL. (if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is IFINDEX_INTERNAL. (zebra_interface) Check return code from interface_cmd.func. Do not set internal ifindex values to if_new_intern_ifindex(), since we now use IFINDEX_INTERNAL for all pseudo interfaces. * kernel_socket.c: (ifm_read) Fix code and comments to reflect that all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL. * rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex. Detects interface rename events by checking if that ifindex is already being used. If it is, delete the old interface before assigning the ifindex to the new interface. (netlink_interface, netlink_link_change) Call set_ifindex to update the ifindex. * if.h: Remove define for IFINDEX_INTERNBASE and add define IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo- interfaces should have ifindex set to 0. (if_new) Remove function. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (ifname2ifindex) New function. * if.c: (if_new) Remove function (absorb into if_create). (if_create) Replace function if_new with call to calloc. Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error in assert to check length of interface name. Add error message if interface with this name already exists. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (if_delete) Implement with help of if_delete_retain. (ifindex2ifname) Reimplement using if_lookup_by_index. (ifname2ifindex) New function to complement ifindex2ifname. (interface) The interface command should check the name length and fail with a warning message if it is too long. (no_interface) Fix spelling in warning message. (if_nametoindex) Reimplement using if_lookup_by_name. (if_indextoname, ifaddr_ipv4_lookup) Reimplement using if_lookup_by_index. * bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead of if_delete, since it is generally not safe to remove interface structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Tighten up code. * ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function was commented out. But this is not safe: we should at least update the ifindex when the interface is deleted. So the new version updates the interface status and sets ifp->ifindex to IFINDEX_INTERNAL. (ospf6_zebra_route_update) Use if_indextoname properly. * ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface flags to help with debugging. * ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Make function static. Tighten up code. * rip_interface.c: (rip_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * ripng_interface.c: (ripng_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
2005-02-042005-02-04 Paul Jakma <paul@dishone.st>paul
* ripd.c: Untangle the construction of RIP auth data. (rip_auth_prepare_str_send) new helper function, prepare correct key string. (rip_auth_simple_write) new helper, write out the rip simple password auth psuedo-RTE. (rip_auth_md5_ah_write) new helper, write out the MD5 auth-header psuedo-RTE. (rip_auth_header_write) new helper, write out correct auth header data / psuedo-RTE. (rip_auth_md5_set) rip out the memmove and writing of the auth header psuedo-RTE. So that all that is left is to write the trailing auth digest, and update digest offset field in the original header. (rip_write_rte) rip out writing of RIP header, writing of simple auth data psuedo-RTE. Make it do what its name suggests, write out actual RTEs. (rip_output_process) remove the incorrect additional decrements of rtemax. Prepare the auth_str, which simple or MD5 auth will need. Move write out of RIP header and auth data to inside the loop. Adjust paramaters as required.
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* daemon.c: (daemon) Replace perror with zlog_err. * vty.c: (vty_serv_un) Replace perror with zlog_err. * ripd.c: (rip_create_socket) Replace perror with zlog_err. * ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with zlog_err. * ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with zlog_err.
2005-01-302005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ripd.c: (rip_create_socket) Save errno before calling ripd_privs.change.
2005-01-042005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* configure.ac: Added test for broken CMSG_FIRSTHDR macro (relevant for Solaris 8 and unpatched Solaris 9, don't know whether other platforms are affected). * zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined by the configure test program). * sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
2004-12-152004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ripd.c: (rip_read) Improve 2 error messages to show the source of the packet when the lookup fails.
2004-12-082004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-10-222004-10-22 Paul Jakma <paul@dishone.st>paul
* ripd.c: Collapse redundant passing of various address structs, struct interface and struct connected as arguments to functions down to two key arguments, namely struct connected and, possibly, address of source/destination. Testing for RIPv1 would be useful. (rip_read) lookup struct connected for the received packet, pass it on. * rip_interface.c: With previous changes, we no longer have to tread carefully with struct connected, as it will always be there and valid.
2004-10-19OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,hasso
ripd might need some more testing though.
2004-10-13Make initializing smux connection configurable - "smux peer OID" commandhasso
initializes connection, and "no smux peer" command terminates it. Fixes bugzilla #47 and #112.
2004-10-11Sync with changes in lib. Make more strings const.hasso
2004-10-08There is no warnings here any more.hasso
2004-09-26Fix compiler warning.hasso
2004-09-23Remove usage of evil list and listnode typedefs.hasso
2004-09-172004-09-17 Paul Jakma <paul@dishone.st>paul
* ripngd/ripngd.c: move setsockopt_so_recvbuf to lib. * lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd. * ripd/ripd.c: set receive buffer to a decent size, some systems have low defaults. Problem noted and fix suggested by Stephan Schweizer in [zebra 20967].
2004-08-192004-08-19 Paul Jakma <paul@dishone.st>paul
* rip_interface.c: (rip_interface_multicast_set) get rid of extraneous if_pointopoint arg. ifp is accessible via connected. pass connected->ifp->ifindex to setsockopt_multicast_ipv4. * ripd.c: (rip_send_packet) update call to rip_interface_multicast_set * ripd.h: update rip_interface_multicast_set prototype
2004-06-112004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com>paul
* filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast to u_char. (ipv6_access_list_remark_cmd) ditto. if.c: ditto * network.c: (readn/writen) pointer arg should be type u_char. * plist.c: needs to include stream.h, not declare stream functions internally. (various) Add static qualifier to internal functions. (prefix_list_type_str) extraneous breaks in switch statement. (ip_prefix_list_description_cmd) buffer_putstr doesnt need cast * stream.h: depends on plist.h and export stream_put_prefix * vty.c: (vty_<telnet option build functions>) should use unsigned char, telnet options are 0 -> 255. * zclient.c: various u_char<->char type cleanups. * zebra.h: Having to define CMSG_* can apply to more than just BSDI_NRL. * ripd.c: (rip_distribute_update_all) distribute list hook function pointer prototype requires struct prefix_list * arg. (rip_distribute_update_all_wrapper) update to pass required arg, NULL.
2004-06-062004-06-06 Paul Jakma <paul.jakma@sun.com>paul
* ripd.h: Add define for the RIPv2 Authentication Data family Move the auth type defines up to where other defines live. Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible md5->auth_len size. Add md5_auth_len field to struct rip_interface: (rip_interface_new) Init md5_auth_len to compatible size. (ip_rip_authentication_mode_cmd) Extended to handle setting md5 auth-length. Appropriate aliases added. (no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to compatible size. (rip_interface_config_write) Teach it about md5_auth_len. _always_ write out the auth-length, so that everyone will get the setting in their config file, and hence allow for a future change of default for md5_auth_len to be less painful - every md5 user will have this setting in their config file. ripd.c: (rip_packet_dump) Change nasty hard coded constants to symbolic defines. Change various tests of 'ntoh.(variable) == constant' to test 'variable == ntoh.(constant)'. Clean up indentation on some long lines. (rip_auth_simple_password) ditto. (rip_auth_md5) ditto, also add length argument and sanity check md5 data offset field. Sanity check md5 auth length, accept RFC or old-ripd/cisco lengths. (rip_auth_md5_set) as per (rip_packet_dump), also write out the configured md5 auth length for the interface (old-ripd or rfc) (rip_read) as per (rip_packet_dump) (rip_write_rte) ditto (rip_response_process) ditto (rip_write_rte) ditto
2004-06-042004-06-04 JJ Ludman <jacques.ludman@sun.com>paul
* ripd.c: Interoperability fix. Correct value for MD5 auth length is 16. Accept packets with this set to >= 16, and set to 16 ourselves.
2004-05-312004-05-31 Sowmini Varadhan <sowmini.varadhan@sun.com>paul
* ripd.c: Fixup compile warnings * rip_routemap.c: Ditto
2004-05-082004-05-08 Paul Jakma <paul@dishone.st>paul
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes (bgp_interface_address_delete) ditto. (bgp_zebra_announce) ditto. (bgp_zebra_withdraw) ditto. * isis_zebra.c: Sync with zclient changes. * zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe message format. * ospf6_zebra.c: Sync to zclient changes * ospf_zebra.c: Sync with lib/zclient changes * rip_zebra.c: sync with zclient changes. * rip_interface.c: ditto. * ripng_{interface,zebra}.c: sync with zclient changes 2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com> * zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route (zapi_ipv4_delete) ditto. (zapi_ipv4_route) add/delete a route by way of cmd arg. (zapi_ipv6_add) collapsed into zapi_ipv6_route. (zapi_ipv6_delete) ditto. (zapi_ipv6_route) add/delete a route by way of cmd arg. (zebra_interface_address_delete_read) collapsed into zebra_interface_address_read. (zebra_interface_address_delete_read) ditto. (zebra_interface_address_read) read address add/delete messages by way of type argument. Describe command message format. (zebra_interface_add_read) Unconditionally read new ifmtu6 field. Describe command message format. (zebra_interface_state_read) Unconditionally read new ifmtu6 field. (zclient_redistribute_set) Collapsed into zclient_redistribute (zclient_redistribute_unset) ditto (zclient_redistribute) set/unset redistribution. (zclient_redistribute_default_set) Collapsed into zclient_redistribute_default. (zclient_redistribute_default_unset) ditto. (zclient_redistribute_default) Redistribute default set/unset. * zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add zclient_redistribute. Ditto for zclient_redistribute_default_{set/unset}.
2004-05-052004-05-05 Anthony.Golia@morganstanley.compaul
* ripd.c: (rip_update_jitter) Bound jitter to a more sensible value, eg 1/4 of update time.
2004-05-032004-05-03 Paul Jakma <paul@dishone.st>paul
* ripd.c: (rip_rte_process) fix typo in merge of previous patch and run function through indent.
2004-05-012004-03-19 Jean-Yves Simon <lethalwp@tiscali.be>paul
* ripd.c: make ripd also check on administrative distance of his own links to update routes.
2004-03-18From Sowmini fix for crash reported in [quagga-dev 929].hasso
2004-03-03[quagga-dev 489] - fix ripd version send by Krzysztof Oledzki.hasso
2004-03-03"show ip rip" fix from Krzysztof Oledzki ([quagga-dev 437]).hasso
2004-01-232004-01-23 sowmini.varadhan@sun.compaul
* rip_interface.c: obsolete unbind code in rip_interface_multicast_set, and instead do the more portable (though slower) method of creating a socket for each outgoing packet and binding the source address on the new socket. * rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that source address is determined by the caller of rip_request_send for ripv1 packets and non-multicast interfaces (rip_request_send loops over all connected address in all other cases). * rip_send_packet: don't send packets with source set to ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;
2003-06-07From: Andrew J. Schorr <aschorr@telemetry-investments.com>paul
Subject: [zebra 12403] patch for ripd to accept any version of RIP by default The default Cisco IOS behavior is to send RIP version 1 packets and receive version 1 and version 2 packets. But zebra version 0.92a sends and receives only version 2 packets by default. I have patched the code to change zebra's default behavior to sending version 2 packets (same as before) but receiving both versions. While this is still not identical to Cisco's behavior, it does now accept packets of both versions and retains backwards compatibility with zebra configurations.
2003-05-25Merge RIP part of 6Wind patch.hasso
2003-05-16Update Changelogspaul
2002-12-13Initial revisionpaul