| Age | Commit message (Collapse) | Author |
|---|
|
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second
function instead of rip_next_thread_timer to display the time until
next update properly.
(rip_next_thread_timer) Remove obsolete function.
|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-09-11 Paul Jakma <paul.jakma@sun.com>
* ripd.c: (rip_read) remove gratuitous use of mid-function
declaration of vrecv, bug #278.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* (general) Fixes for bugs #261 and 262. Thanks to
Konstantin V. Gavrilenko <kos@arhont.com> for the problem
reports, testing of a series of proposed patches and comment
on the proposed changes in behaviour.
* rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all
of the command before making any changes to configured state.
* ripd.c: (rip_read) RIP version control should be absolute and
always apply, fixes bug #261 by allowing RIPv1 to be disabled.
Fix bug #262: If authentication is enabled, then
unauthenticated packets should not be accepted. We do however
make an exception for RIPv1 REQUEST packets, to which we will
reply as RIPv1 can now be disabled fully, to allow ripd to
still provide routing /information/ to simple devices.
|
|
2006-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ripd.c: (rip_update_process) Try to fix the logic for sending
an updated on each connected network. The new code will
attempt to send the update on each connected network, whereas
the previous code seemed to be attempting to avoid sending
more than one RIPv1 update on a given interface, but was coded
incorrectly. The actual effect of the old code was to send
an update only on the first connected address in the cases
where the interface is not multicast, or RIPv2 is not being used.
|
|
over connected routes
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* ripd.c: (rip_auth_md5) remove pdigest, not needed.
Use a local buffer for the auth_str, where it can be properly
nul padded. Do so, hence fixing MD5 authentication.
Key looked up via key ring should be used in preference to
the RIPv1 simple password, not other way around.
No need to copy around digests, we can reference them
directly.
The auth_len received can't be trusted, some implementations
lie (e.g. older ripd).
(rip_auth_md5_ah_write) rename len local variable to doff
to be consistent with other functions.
(rip_auth_header_write) add the missing return.
(rip_auth_md5_set) use the proper constructs to access stream.
|
|
* ripd.c: (rip_response_process) Instead of calling
rip_interface.c:if_valid_neighbor(), call the equivalent
library function if_lookup_address().
* rip_interface.c: (if_valid_neighbor) Remove function, since it is
essentially equivalent to the if_lookup_address() library function.
* ripd.h: (if_valid_neighbor) Remove function declaration.
|
|
* ripd.c: Update couple more functions to specify void
explicitely.
|
|
* (general) static/extern functions and definitions.
* rip_interface.h: new file, export the public functions from
rip_interface.c
|
|
* ripd.c: rip_create_socket() for each packet, it does not bind to the
proper interfaces because we forget to use the from address when
it is specified.
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* lib/filer.c: show protocol name in filter_show()
* lib/plist.c: show protocol name in vty_show_prefix_entry()
* routemap.c: show protocol name in vty_show_route_map_entry()
* lib/vty.c: in vty_command(), show protocol name if command unknown
* zebra/zserv.c: Always provide distance fo route add
* ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance
with RFC. Also PeerDomain is now set to a STRING type.
* ripd/ripd.h: rip_redistribute_add() API includes metric and distance
* ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance
Now allows a RIP-route to overcome a redistributed route coming
from a protocol with worse (higher) administrative distance
Metrics from redistribution are shown in show ip rip
* ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e.
provide distance and metric
* ripd/rip_interface.c: adapt to the rip_redistribute_add() API
* ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage
rather a CMD_WARNING, because set metric ius shared with other
protocols using larger values (such as OSPF)
The match metric action takes first external metric if present
(from redistribution) then RIP metric.
|
|
* lib/md5-gnu.h: removed
* lib/md5.h: replaces md5-gnu.h
* lib/Makefile.am: use correct md5.h
* lib/md5.c: import from WIDE
* ospfd/ospf_packet.c: use new md5 API
* ripd/ripd.c: use new md5 API
|
|
* ripd.c: (general) Fix previous commit, broke multicast bind and
hence setting of source port, which broke communication with
non-borken ripd. Fix removes more stuff from rip_interface.c
than it adds to ripd.c ;)
(rip_create_socket) the to argument really is a from argument,
rename it. Set the source port to RIP port unconditionally, it's
required.
(rip_send_packet) Set from address correctly for multicast.
(rip_output_process) trivial: num can be BSS specified, rather
than in body.
* rip_interface.c: (rip_interface_multicast_set) strip out
redundant stuff related to bind, which rip_create_socket does.
Just make it set the multicast socket option, as per the
interface concerned, no more.
|
|
* ripd.c: (rip_create_socket) Make it static.
Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP
port messages should be discarded, quagga doesnt accept them,
no need to lookup port.
Take a 'to' argument, if socket should be bound to something else.
setsockopt_so_recvbuf might need privs, move it to the raised
privileges section.
dont forget to close the socket if bind fails.
(rip_send_packet) use strncpy, just in case (address is under
our control anyway, but still).
dont duplicate rip_create_socket - just use it.
(rip_create) rip_create_socket takes an argument now, modify.
|
|
* ripd.c: (rip_create_socket) move it up so rip_send_packet
can use it too.
|
|
* ripd.c: (rip_output_process) fix error which crept in my
previous rip auth untanglement commit - it had become impossible
to not have authentication (even for v1).
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
* ripd.c: Untangle the construction of RIP auth data.
(rip_auth_prepare_str_send) new helper function, prepare
correct key string.
(rip_auth_simple_write) new helper, write out the
rip simple password auth psuedo-RTE.
(rip_auth_md5_ah_write) new helper, write out the
MD5 auth-header psuedo-RTE.
(rip_auth_header_write) new helper, write out correct
auth header data / psuedo-RTE.
(rip_auth_md5_set) rip out the memmove and writing of the
auth header psuedo-RTE. So that all that is left is to
write the trailing auth digest, and update digest offset
field in the original header.
(rip_write_rte) rip out writing of RIP header, writing of
simple auth data psuedo-RTE. Make it do what its name suggests,
write out actual RTEs.
(rip_output_process) remove the incorrect additional decrements
of rtemax. Prepare the auth_str, which simple or MD5 auth will
need. Move write out of RIP header and auth data to inside the
loop. Adjust paramaters as required.
|
|
* daemon.c: (daemon) Replace perror with zlog_err.
* vty.c: (vty_serv_un) Replace perror with zlog_err.
* ripd.c: (rip_create_socket) Replace perror with zlog_err.
* ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with
zlog_err.
* ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with
zlog_err.
|
|
* ripd.c: (rip_create_socket) Save errno before calling
ripd_privs.change.
|
|
* configure.ac: Added test for broken CMSG_FIRSTHDR macro
(relevant for Solaris 8 and unpatched Solaris 9, don't know
whether other platforms are affected).
* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether
config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined
by the configure test program).
* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead
of CMSG_FIRSTHDR.
* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR
instead of CMSG_FIRSTHDR.
* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of
CMSG_FIRSTHDR.
|
|
* ripd.c: (rip_read) Improve 2 error messages to show the source of
the packet when the lookup fails.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
* ripd.c: Collapse redundant passing of various address structs,
struct interface and struct connected as arguments to functions
down to two key arguments, namely struct connected and, possibly,
address of source/destination. Testing for RIPv1 would be useful.
(rip_read) lookup struct connected for the received packet, pass
it on.
* rip_interface.c: With previous changes, we no longer have to tread
carefully with struct connected, as it will always be there and
valid.
|
|
ripd might need some more testing though.
|
|
|
|
|
|
|
|
|
|
* ripngd/ripngd.c: move setsockopt_so_recvbuf to lib.
* lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.
* ripd/ripd.c: set receive buffer to a decent size, some systems
have low defaults. Problem noted and fix suggested by Stephan
Schweizer in [zebra 20967].
|
|
* rip_interface.c: (rip_interface_multicast_set) get rid
of extraneous if_pointopoint arg. ifp is accessible via connected.
pass connected->ifp->ifindex to setsockopt_multicast_ipv4.
* ripd.c: (rip_send_packet) update call to
rip_interface_multicast_set
* ripd.h: update rip_interface_multicast_set prototype
|
|
* filter.c: (access_list_remark_cmd) buffer_putstr doesnt need cast
to u_char. (ipv6_access_list_remark_cmd) ditto.
if.c: ditto
* network.c: (readn/writen) pointer arg should be type u_char.
* plist.c: needs to include stream.h, not declare stream functions
internally.
(various) Add static qualifier to internal functions.
(prefix_list_type_str) extraneous breaks in switch statement.
(ip_prefix_list_description_cmd) buffer_putstr doesnt need cast
* stream.h: depends on plist.h and export stream_put_prefix
* vty.c: (vty_<telnet option build functions>) should use
unsigned char, telnet options are 0 -> 255.
* zclient.c: various u_char<->char type cleanups.
* zebra.h: Having to define CMSG_* can apply to more than just
BSDI_NRL.
* ripd.c: (rip_distribute_update_all) distribute list hook
function pointer prototype requires struct prefix_list * arg.
(rip_distribute_update_all_wrapper) update to pass required arg,
NULL.
|
|
* ripd.h: Add define for the RIPv2 Authentication Data family
Move the auth type defines up to where other defines live.
Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible
md5->auth_len size. Add md5_auth_len field to struct
rip_interface: (rip_interface_new) Init md5_auth_len to compatible
size.
(ip_rip_authentication_mode_cmd) Extended to handle setting
md5 auth-length. Appropriate aliases added.
(no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to
compatible size.
(rip_interface_config_write) Teach it about md5_auth_len.
_always_ write out the auth-length, so that everyone will get
the setting in their config file, and hence allow for a future
change of default for md5_auth_len to be less painful - every md5
user will have this setting in their config file.
ripd.c: (rip_packet_dump) Change nasty hard coded constants to
symbolic defines. Change various tests of 'ntoh.(variable) ==
constant' to test 'variable == ntoh.(constant)'. Clean up
indentation on some long lines.
(rip_auth_simple_password) ditto.
(rip_auth_md5) ditto, also add length argument and sanity check
md5 data offset field. Sanity check md5 auth length, accept RFC
or old-ripd/cisco lengths.
(rip_auth_md5_set) as per (rip_packet_dump), also write out
the configured md5 auth length for the interface (old-ripd or rfc)
(rip_read) as per (rip_packet_dump)
(rip_write_rte) ditto
(rip_response_process) ditto
(rip_write_rte) ditto
|
|
* ripd.c: Interoperability fix. Correct value for MD5 auth length
is 16. Accept packets with this set to >= 16, and set to 16
ourselves.
|
|
* ripd.c: Fixup compile warnings
* rip_routemap.c: Ditto
|
|
* ripd.c: (rip_update_jitter) Bound jitter to a more sensible
value, eg 1/4 of update time.
|
|
* ripd.c: (rip_rte_process) fix typo in merge of previous patch
and run function through indent.
|
|
* ripd.c: make ripd also check on administrative distance of his
own links to update routes.
|
|
|
|
|
|
|
|
|
|
* rip_interface.c: obsolete unbind code in
rip_interface_multicast_set, and instead do the more portable
(though slower) method of creating a socket for each outgoing packet
and binding the source address on the new socket.
* rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that
source address is determined by the caller of rip_request_send for
ripv1 packets and non-multicast interfaces (rip_request_send loops
over all connected address in all other cases).
* rip_send_packet: don't send packets with source set to
ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;
|
|
* ripd/ripd.c: rip_output_process() fixup aspects of split-horizon
route suppression. See [quagga-dev 429].
|
|
* ripd/ripd.c: rip_create_socket() privs were not dropped if bind
failed.
|
|
* ripd/ripd.c: (rip_send_packet) use rip->sock for mcast sends,
instead of creating one socket per send. send source addr to
rip_update_interface.
(rip_update_process) should send an update on every connected
network for each interface.
(rip_request_send) should send a request on every connected
network for each interface.
* ripd/ripd.h: update prototype for rip_interface_multicast_set
* ripd/rip_interface.c: (rip_interface_multicast_set) reorganized
so that it can be called repeatedly for aliased interfaces (on
multiple networks).
|
