| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com>
* lib/log.{c,h}: struct message argument should point to const
* */*.c: adjust to suit,
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: add a configure flag and autoconf macro, which will
determine if your toolchain supports PIE.
* */Makefile.am: add corresponding CFLAGS and LDFLAGS into
appropriate places.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
|
|
2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com>
* ripd.c: (rip_auth_md5) fix bogus empty string test
|
|
2008-05-29 Martin Nagy <mnagy@redhat.com>
* */*main.c: Sanity check port numbers before using.
|
|
2008-03-13 Paul Jakma <paul.jakma@sun.com>
* ripd.c/rip_interface.c: Remove 0 entries from rip_msg
ri_version_msg struct message's, not needed with recent fixes
to mes_lookup.
|
|
2007-05-09 Paul Jakma <paul.jakma@sun.com>
* configure.ac: sys/conf.h depends on sys/param.h, at least on
FBSD 6.2.
(bug #363) Should check for in_pktinfo for IRDP
2006-05-27 Paul Jakma <paul.jakma@sun.com>
* configure.ac: General cleanup of header and type checks, introducing
an internal define, QUAGGA_INCLUDES, to build up a list of
stuff to include so as to avoid 'present but cant be compiled'
warnings.
Misc additional checks of things missing according to autoscan.
Add LIBM, for bgpd's use of libm, so as to avoid burdening
LIBS, and all the binaries, with libm linkage.
Remove the bad practice of using m4 changequote(), just
quote the []'s in the case statements properly.
This should fix bugs 162, 303 and 178.
* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced
HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN,
* bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
|
|
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now.
* ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable
timer_now.
|
|
thread_timer_remain_second)
|
|
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second
function instead of rip_next_thread_timer to display the time until
next update properly.
(rip_next_thread_timer) Remove obsolete function.
|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
syntax
2006-10-04 Oliver Hookins <ohookins@gmail.com>
* bgpd/bgp_main.c: Add configuration check option, with
'-C' rather than '-c' for consistency between daemons.
* isisd/isis_main.c: ditto
* ospf6d/ospf6_main.c: ditto
* ospfd/ospf_main.c: ditto
* ripngd/ripng_main.c: ditto
* vtysh/vtysh_main.c: ditto
* ripd/rip_main.c: Change the config check option to
'-C' and tidy up the code.
* zebra/main.c: ditto
2006-10-04 Stergiakis Alexandros <astergiakis@antcor.com>
* ripd/rip_main.c: This trivial patch introduces a new
command-line option '-c', which instructs zebra/ripd
to check its configuration file for validity, print
any error message, and then exit. This is useful when
the configuration file is edited by hand or otherwise,
and you simply want to validate it without any other
effect.
* zebra/main.c: ditto
|
|
2006-09-11 Paul Jakma <paul.jakma@sun.com>
* rip_routemap.c: (route_set_metric) underflow check needs to
use signed, problem identified and diagnosed by Pavel
Nikiforov in bug #293.
|
|
2006-09-11 Paul Jakma <paul.jakma@sun.com>
* ripd.c: (rip_read) remove gratuitous use of mid-function
declaration of vrecv, bug #278.
|
|
2006-06-29 Paul Jakma <paul.jakma@sun.com>
* rip_zebra: (general) convert redistribute commands to use
the auto-generated defines.
|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* (general) Fixes for bugs #261 and 262. Thanks to
Konstantin V. Gavrilenko <kos@arhont.com> for the problem
reports, testing of a series of proposed patches and comment
on the proposed changes in behaviour.
* rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all
of the command before making any changes to configured state.
* ripd.c: (rip_read) RIP version control should be absolute and
always apply, fixes bug #261 by allowing RIPv1 to be disabled.
Fix bug #262: If authentication is enabled, then
unauthenticated packets should not be accepted. We do however
make an exception for RIPv1 REQUEST packets, to which we will
reply as RIPv1 can now be disabled fully, to allow ripd to
still provide routing /information/ to simple devices.
|
|
2006-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ripd.c: (rip_update_process) Try to fix the logic for sending
an updated on each connected network. The new code will
attempt to send the update on each connected network, whereas
the previous code seemed to be attempting to avoid sending
more than one RIPv1 update on a given interface, but was coded
incorrectly. The actual effect of the old code was to send
an update only on the first connected address in the cases
where the interface is not multicast, or RIPv2 is not being used.
|
|
over connected routes
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* ripd.c: (rip_auth_md5) remove pdigest, not needed.
Use a local buffer for the auth_str, where it can be properly
nul padded. Do so, hence fixing MD5 authentication.
Key looked up via key ring should be used in preference to
the RIPv1 simple password, not other way around.
No need to copy around digests, we can reference them
directly.
The auth_len received can't be trusted, some implementations
lie (e.g. older ripd).
(rip_auth_md5_ah_write) rename len local variable to doff
to be consistent with other functions.
(rip_auth_header_write) add the missing return.
(rip_auth_md5_set) use the proper constructs to access stream.
|
|
* ripd.c: (rip_response_process) Instead of calling
rip_interface.c:if_valid_neighbor(), call the equivalent
library function if_lookup_address().
* rip_interface.c: (if_valid_neighbor) Remove function, since it is
essentially equivalent to the if_lookup_address() library function.
* ripd.h: (if_valid_neighbor) Remove function declaration.
|
|
* Makefile.am: Add rip_interface.h, or else it doesn't get
included in dists.
|
|
* ripd.c: Update couple more functions to specify void
explicitely.
|
|
* (general) static/extern functions and definitions.
* rip_interface.h: new file, export the public functions from
rip_interface.c
|
|
* ripd.c: rip_create_socket() for each packet, it does not bind to the
proper interfaces because we forget to use the from address when
it is specified.
|
|
* rip_interface.c: Now the command "no ip rip split-horizon
poisoned-reverse" just inhibates the poisoned-reverse effects
but keep spli-horizon activ.
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
* configure.ac: Add the test for Solaris least-privileges. Set
defines for whether capabilities are supported and whether of
the linux or solaris variety.
Add missing-prototypes, missing-declarations, char-subscripts
and cast-qual warnings to default cflags, cause Hasso enjoys warnings,
and we really should clean the remaining ones up. (ie isisd..).
* (*/*main.c) Update the zebra_capabilities_t arrays in the various
daemons to match the changes made in lib/privs.h.
* zebra.h: Solaris capabilities requires priv.h to be included.
* privs.{c,h}: Add support for Solaris Least-Privileges.
privs.h: Reduce some of the abstract capabilities, which do
not have rough equivalents on both systems. Rename the net
related caps to _NET, as they should have been in first
place.
(zprivs_terminate) should take the zebra_privs_t as argument so
that it can update change pointer.
Add an additional privilege state, ZPRIVS_UNKNOWN.
* privs.c: (various capability functions) Add
Solaris privileges variants.
(zprivs_state) Use privs.c specific generic types to
represent various capability/privilege related types, so that
each can be typedef'd as appropriate on each platform.
(zprivs_null_state) static added, to hold the state the null
method should report (should be raised by default, and
LOWERED if zprivs_terminate has been called)
(zprivs_state_null) Report back the zprivs_null_state.
(cap_map) Make it able to map abstract capability to multiple
system capabilities.
(zcaps2sys) Map to abstract capabilities to multiple system
privileges/capabilities.
(zprivs_init) move capability related init to seperate
function, zprivs_caps_init.
(zprivs_terminate) ditto, moved to zprivs_caps_terminate.
Set the change_state callback to the NULL state, so the
user can continue to run and use the callbacks.
|
|
* lib/filer.c: show protocol name in filter_show()
* lib/plist.c: show protocol name in vty_show_prefix_entry()
* routemap.c: show protocol name in vty_show_route_map_entry()
* lib/vty.c: in vty_command(), show protocol name if command unknown
* zebra/zserv.c: Always provide distance fo route add
* ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance
with RFC. Also PeerDomain is now set to a STRING type.
* ripd/ripd.h: rip_redistribute_add() API includes metric and distance
* ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance
Now allows a RIP-route to overcome a redistributed route coming
from a protocol with worse (higher) administrative distance
Metrics from redistribution are shown in show ip rip
* ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e.
provide distance and metric
* ripd/rip_interface.c: adapt to the rip_redistribute_add() API
* ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage
rather a CMD_WARNING, because set metric ius shared with other
protocols using larger values (such as OSPF)
The match metric action takes first external metric if present
(from redistribution) then RIP metric.
|
|
* lib/md5-gnu.h: removed
* lib/md5.h: replaces md5-gnu.h
* lib/Makefile.am: use correct md5.h
* lib/md5.c: import from WIDE
* ospfd/ospf_packet.c: use new md5 API
* ripd/ripd.c: use new md5 API
|
|
* ripd.c: (general) Fix previous commit, broke multicast bind and
hence setting of source port, which broke communication with
non-borken ripd. Fix removes more stuff from rip_interface.c
than it adds to ripd.c ;)
(rip_create_socket) the to argument really is a from argument,
rename it. Set the source port to RIP port unconditionally, it's
required.
(rip_send_packet) Set from address correctly for multicast.
(rip_output_process) trivial: num can be BSS specified, rather
than in body.
* rip_interface.c: (rip_interface_multicast_set) strip out
redundant stuff related to bind, which rip_create_socket does.
Just make it set the multicast socket option, as per the
interface concerned, no more.
|
|
* ripd.c: (rip_create_socket) Make it static.
Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP
port messages should be discarded, quagga doesnt accept them,
no need to lookup port.
Take a 'to' argument, if socket should be bound to something else.
setsockopt_so_recvbuf might need privs, move it to the raised
privileges section.
dont forget to close the socket if bind fails.
(rip_send_packet) use strncpy, just in case (address is under
our control anyway, but still).
dont duplicate rip_create_socket - just use it.
(rip_create) rip_create_socket takes an argument now, modify.
|
|
* ripd.c: (rip_create_socket) move it up so rip_send_packet
can use it too.
|
|
* rip_interface.c: Fix authentication, no-auth impossible to specify
(rip_interface_new) default to RIP_NO_AUTH
(rip_interface_reset) ditto
(rip_interface_config_write) write out config for simple
|
|
* ripd.c: (rip_output_process) fix error which crept in my
previous rip auth untanglement commit - it had become impossible
to not have authentication (even for v1).
|
|
[backport candidate]
|
|
address as nexthop in routemap.
Fixes bugzilla #186. [backport candidate]
|
|
in and out interfaces.
Fixes bugzilla #185. [backport candidate]
|
|
* rip_interface.c (rip_interface_add): Need to call
rip_passive_interface_apply (was already calling it in
rip_interface_up).
[backport candidate]
|
|
Implement non-blocking zclient I/O with buffering.
* zclient.h (struct zclient): Add two fields to support non-blocking
I/O: struct buffer *wb, and struct thread *t_write.
(zclient_free): Remove function.
(zebra_redistribute_send): Change 2nd arg from socket fd to
struct zclient * (needed to support non-blocking I/O and buffering).
(zclient_send_message): New function to send an arbitrary
message with non-blocking I/O.
* zclient.c (zclient_new): Create write buffer.
(zclient_free): Remove unused function.
(zclient_stop): Must cancel new t_write thread. Also, reset
all buffers: ibuf, obuf, and wb.
(zclient_failed): New helper function for typical error handling.
(zclient_flush_data): New thread to flush queued data.
(zclient_send_message): New function to send the message in
zclient->obuf to zebra using non-blocking I/O and buffering.
(zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use
new zclient_send_message function instead of calling writen.
(zclient_start): Set socket non-blocking. Also, change 2nd arg
to zebra_redistribute_send from zclient->sock to zclient.
(zebra_redistribute_send): Change 2nd arg to struct zclient *.
Can now use zclient->obuf to assemble the message instead of
allocating a temporary stream. And call zclient_send_message to
send the message instead of writen.
(zclient_read): Convert to support non-blocking I/O by using
stream_read_try instead of deprecated stream_read.
(zclient_redistribute): Change 2nd arg to zebra_redistribute_send
from zclient->sock to zclient.
* ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute):
Change 2nd arg to zebra_redistribute_send from zclient->sock
to zclient.
* ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead
of writen.
* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,
rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send
from zclient->sock to zclient.
* ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean):
Change 2nd arg to zebra_redistribute_send from zclient->sock
to zclient.
* bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset):
The 2nd arg to zebra_redistribute_send is now zclient instead of
zclient->sock.
* isis_zebra.h (isis_zebra_finish): Remove declaration of unused
function.
* isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message
to send the message to zebra instead of calling writen directly, since
zclient_send_message understands non-blocking I/O and will manage
the buffer queue appropriately.
(isis_zebra_finish): Remove unused function, particularly since
the zclient_free function has been removed.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
Fix problems when netlink interfaces are renamed (same ifindex used
for a new interface). Start cleaning up some problems with the way
interface names are handled.
* interface.c: (if_new_intern_ifindex) Remove obsolete function.
(if_delete_update) After distributing the interface deletion message,
set ifp->ifindex to IFINDEX_INTERNAL.
(if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is
IFINDEX_INTERNAL.
(zebra_interface) Check return code from interface_cmd.func.
Do not set internal ifindex values to if_new_intern_ifindex(),
since we now use IFINDEX_INTERNAL for all pseudo interfaces.
* kernel_socket.c: (ifm_read) Fix code and comments to reflect that
all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL.
* rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex.
Detects interface rename events by checking if that ifindex is already
being used. If it is, delete the old interface before assigning
the ifindex to the new interface.
(netlink_interface, netlink_link_change) Call set_ifindex to update
the ifindex.
* if.h: Remove define for IFINDEX_INTERNBASE and add define
IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo-
interfaces should have ifindex set to 0.
(if_new) Remove function.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(ifname2ifindex) New function.
* if.c: (if_new) Remove function (absorb into if_create).
(if_create) Replace function if_new with call to calloc.
Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error
in assert to check length of interface name. Add error message
if interface with this name already exists.
(if_delete_retain) New function to delete an interface without
removing from iflist and freeing the structure.
(if_delete) Implement with help of if_delete_retain.
(ifindex2ifname) Reimplement using if_lookup_by_index.
(ifname2ifindex) New function to complement ifindex2ifname.
(interface) The interface command should check the name length
and fail with a warning message if it is too long.
(no_interface) Fix spelling in warning message.
(if_nametoindex) Reimplement using if_lookup_by_name.
(if_indextoname, ifaddr_ipv4_lookup) Reimplement using
if_lookup_by_index.
* bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
* isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead
of if_delete, since it is generally not safe to remove interface
structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Tighten up code.
* ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function
was commented out. But this is not safe: we should at least update
the ifindex when the interface is deleted. So the new version
updates the interface status and sets ifp->ifindex to
IFINDEX_INTERNAL.
(ospf6_zebra_route_update) Use if_indextoname properly.
* ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface
flags to help with debugging.
* ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex
to IFINDEX_INTERNAL.
(zebra_interface_if_lookup) Make function static. Tighten up code.
* rip_interface.c: (rip_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
* ripng_interface.c: (ripng_interface_delete) After deleting, set
ifp->ifindex to IFINDEX_INTERNAL.
|
|
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES
for that.
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* (global) Update code to match stream.h changes.
stream_get_putp effectively replaced with stream_get_endp.
stream_forward renamed to stream_forward_getp.
stream_forward_endp introduced to replace some previous
setting/manual twiddling of putp by daemons.
* lib/stream.h: Remove putp. Update reference to putp with endp.
Add stream_forward_endp, which daemons were doing manually.
Rename stream_forward to stream_forward_getp.
lib/stream.c: Remove/update references to putp.
introduce stream_forward_endp.
|
|
* ripd.c: Untangle the construction of RIP auth data.
(rip_auth_prepare_str_send) new helper function, prepare
correct key string.
(rip_auth_simple_write) new helper, write out the
rip simple password auth psuedo-RTE.
(rip_auth_md5_ah_write) new helper, write out the
MD5 auth-header psuedo-RTE.
(rip_auth_header_write) new helper, write out correct
auth header data / psuedo-RTE.
(rip_auth_md5_set) rip out the memmove and writing of the
auth header psuedo-RTE. So that all that is left is to
write the trailing auth digest, and update digest offset
field in the original header.
(rip_write_rte) rip out writing of RIP header, writing of
simple auth data psuedo-RTE. Make it do what its name suggests,
write out actual RTEs.
(rip_output_process) remove the incorrect additional decrements
of rtemax. Prepare the auth_str, which simple or MD5 auth will
need. Move write out of RIP header and auth data to inside the
loop. Adjust paramaters as required.
|
|
* daemon.c: (daemon) Replace perror with zlog_err.
* vty.c: (vty_serv_un) Replace perror with zlog_err.
* ripd.c: (rip_create_socket) Replace perror with zlog_err.
* ioctl.c: (if_ioctl,if_ioctl_ipv6,if_get_flags) Replace perror with
zlog_err.
* ioctl_solaris.c: (if_ioctl,if_ioctl_ipv6) Replace perror with
zlog_err.
|
|
* ripd.c: (rip_create_socket) Save errno before calling
ripd_privs.change.
|
