| Age | Commit message (Collapse) | Author |
|---|
|
and use VTY_GET_INTEGER_RANGE instead of calling strtoul
|
|
IPv6 supports the same concept of differentiated service for routing
protocols as IPv4, but like too many things, the standards committee
decided that having two names for the same thing wasn't good enough and
introduced a third more generic term transport class.
The socket option to set transport class works the same as IPv4, but the
arguments are different.
* lib/sockopt.[ch]
* setsockopt_ipv6_tclass(): new function
* bgpd/bgp_network.c
* bgp_connect(): set socket option
* bgp_listener(): set socket option
* ospf6d/ospf6_network.c
* ospf6_set_transport_class(): new function
* ospf6_serv_sock(): set socket option
* ripngd/ripngd.c
* ripng_make_socket(): set socket option
|
|
* ripngd/ripng_interface.c
* ripng_check_max_mtu(): unused, sayonara
* ripng_interface_down(): cast flag arguments to logging function
* ripng_interface_add(): idem
* ripng_interface_delete(): idem
* ripngd/ripngd.c
* ripng_recv_packet(): avoid aliasing warning dereferencing pointer
|
|
The cmd_nodes used to configure vty, can mostly be static so
(basic data hiding 101).
|
|
Simple conversion of XMALLOC/memset to XCALLOC
|
|
2008-08-15 Paul Jakma <paul.jakma@sun.com>
* {ospf6d,ripngd}/*: Finish job of marking functions as static, or
exporting declarations for them, to quell warning noise with
Quagga's GCC default high-level of warning flags. Thus allowing
remaining, more useful warnings to be more easily seen.
|
|
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now.
* ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable
timer_now.
|
|
|
|
* zebra.h: Declare new functions zebra_route_string() and
zebra_route_char().
* log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New
functions to map zebra route numbers to strings.
* zebra_vty.c: (route_type_str) Remove obsolete function: use new
library function zebra_route_string() instead. Note that there
are a few differences: for IPv6 routes, we now get "ripng" and
"ospf6" instead of the old behavior ("rip" and "ospf").
(route_type_char) Remove obsolete function: ues new library function
zebra_route_char() instead. Note that there is one difference:
the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route,
whereas the new one returns 'X'.
(vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace
route_type_str() with zebra_route_string().
(vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char()
with zebra_route_char().
* bgp_vty.c: (bgp_config_write_redistribute) Use new library function
zebra_route_string instead of a local hard-coded table.
* ospf6_asbr.c: Remove local hard-coded tables zroute_name and
zroute_abname. Change the ZROUTE_NAME macro to use new library
function zebra_route_string(). Remove the ZROUTE_ABNAME macro.
(ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with
a call to zebra_route_char(), and be sure to fix the format string,
since we now have a char instead of a char *.
* ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and
zebra_route_abname. Note that the zebra_route_name[] table
contained mixed-case strings, whereas the zebra_route_string()
function returns lower-case strings.
(ospf6_zebra_read_ipv6): Change debug message to use new library
function zebra_route_string() instead of zebra_route_name[].
(show_zebra): Use new library function zebra_route_string() instead
of zebra_route_name[].
* ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto.
(ospf_redist_string) New function implemented using new library
function zebra_route_string(). Note that there are a few differences
in the output that will result: the new function returns strings
that are lower-case, whereas the old table was mixed case. Also,
the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the
new function returns "ospf6".
* ospfd.h: Remove extern struct message ospf_redistributed_proto[],
and add extern const char *ospf_redist_string(u_int route_type)
instead.
* ospf_asbr.c: (ospf_external_info_add) In two messages, use
ospf_redist_string instead of LOOKUP(ospf_redistributed_proto).
* ospf_vty.c: Remove local hard-coded table distribute_str.
(config_write_ospf_redistribute,config_write_ospf_distribute): Use
new library function zebra_route_string() instead of distribute_str[].
* ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset,
ospf_redistribute_default_set,ospf_redistribute_check)
In debug messages, use ospf_redist_string() instead of
LOOKUP(ospf_redistributed_proto).
* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
table str[]. Replace str[] with calls to new library function
zebra_route_string().
* ripd.c: Remove local hard-coded table route_info[].
(show_ip_rip) Replace uses of str[] with calls to new library
functions zebra_route_char and zebra_route_string.
* ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded
table str[]. Replace str[i] with new library function
zebra_route_string(i).
* ripngd.c: Remove local hard-coded table route_info[].
(show_ipv6_ripng) Use new library function zebra_route_char() instead
of table route_info[].
|
|
Forwardport from stable branch.
|
|
inet_ntoa alike.
* ripngd.[hc], ripng_interface.c, ripng_peer.c: inet6_ntoa() takes
argument now by value.
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
ripngd/ripngd.c (inet6_ntop).
* ripngd.[hc]: Remove inet6_ntop() and any usage of it. inet6_ntoa()
from lib is used now.
* ripng_interface.c: inet6_ntop() -> inet6_ntoa().
* ripng_peer.c: inet6_ntop() -> inet6_ntoa().
|
|
* configure.ac: Added test for broken CMSG_FIRSTHDR macro
(relevant for Solaris 8 and unpatched Solaris 9, don't know
whether other platforms are affected).
* zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether
config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined
by the configure test program).
* sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead
of CMSG_FIRSTHDR.
* rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR
instead of CMSG_FIRSTHDR.
* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
* ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of
CMSG_FIRSTHDR.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
|
|
|
|
|
|
|
|
* ripngd/ripngd.c: move setsockopt_so_recvbuf to lib.
* lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.
* ripd/ripd.c: set receive buffer to a decent size, some systems
have low defaults. Problem noted and fix suggested by Stephan
Schweizer in [zebra 20967].
|
|
|
|
* ripngd/ripngd.c: ripng_make_socket() add calls to raise/lower
privs.
|
|
|
|
|
|
same idea as in lib/distribute.c to allow extract.pl to pick up commands
for vtysh.
|
|
This one fixes "router xxx" node commands in vtysh. Don't get "unknown
command" error when entering "passive-interface eth0" command while
ospfd and ospf6d running etc.
|
|
http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch
Allows to extract.pl to pickup "route-map xxx in/out dev" commands for vtysh
(ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the
ripngd/ directory.
|
|
|
