| Age | Commit message (Collapse) | Author |
|---|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* bgp_main.c: (sigint) Use zlog_notice for termination message.
(main) Use zlog_notice for startup announcement.
* isis_main.c: (sigint,sigterm) Use zlog_notice for termination message.
(terminate) This function should be static, not global.
(main) Use zlog_notice for startup announcement, and remove
ifdef ZEBRA_VERSION.
* version.h.in: Remove declaration for pid_output_lock, this function
is now static, not global.
* pid_output.c: (pid_output_lock) This function should be static, not
global. And remove "old umask" error message, since it was really
an unimportant debug message, not an error.
(pid_output) Need to declare static function pid_output_lock.
* ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination
message.
(main) Remove commented-out call to pid_output_lock (which should
never be called other than from inside pid_output). And use
zlog_notice to print the startup message, which now includes
the vty port.
* ospf_main.c: (sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* rip_main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
* ripng_main.c: (sighup) Remove spurious terminating message.
(sigint) Use zlog_notice for termination message.
(main) Issue a startup announcement using zlog_notice.
* main.c: (sigint) Use zlog_notice for termination message.
(main) Add a startup announcement using zlog_notice.
|
|
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
with CVS trees.
|
|
|
|
|
|
|
|
|
|
|
|
* ripngd/ripngd.c: move setsockopt_so_recvbuf to lib.
* lib/sockopt.{c,h}: Add setsockopt_so_recvbuf, for ripd and ripngd.
* ripd/ripd.c: set receive buffer to a decent size, some systems
have low defaults. Problem noted and fix suggested by Stephan
Schweizer in [zebra 20967].
|
|
|
|
|
|
|
|
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
* */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir
-lfoo", to avoid linking against installed libraries from a
previous version.
* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared
library version number to be 0.0
* configure.ac: remove spurious , so extract.pl is chmod'd +x.
* HACKING: explain shared library versioning rules
|
|
|
|
|
|
* ripng_interface.c (ripng_multicast_join): Use privs to do join,
to work around bug on gif(4) on NetBSD 1.6.2.
|
|
to read system one.
|
|
|
|
* ripng_nexthop.h: SUNOS_5 does not define s6_addr32
catch ifndef(s6_addr32) && defined(SUNOS_5) and define
it ourselves based on the S10 _KERNEL guarded define.
|
|
* bgp_zebra.c: (bgp_interface_address_add) sync to zclient changes
(bgp_interface_address_delete) ditto.
(bgp_zebra_announce) ditto.
(bgp_zebra_withdraw) ditto.
* isis_zebra.c: Sync with zclient changes.
* zclient.c (zapi_ipv4_route) Follow Sowmini's lead and describe
message format.
* ospf6_zebra.c: Sync to zclient changes
* ospf_zebra.c: Sync with lib/zclient changes
* rip_zebra.c: sync with zclient changes.
* rip_interface.c: ditto.
* ripng_{interface,zebra}.c: sync with zclient changes
2004-05-08 Sowmini Varadhan <sowmini.varadhan@sun.com>
* zclient.c: (zapi_ipv4_add) collapsed into zapi_ipv4_route
(zapi_ipv4_delete) ditto.
(zapi_ipv4_route) add/delete a route by way of cmd arg.
(zapi_ipv6_add) collapsed into zapi_ipv6_route.
(zapi_ipv6_delete) ditto.
(zapi_ipv6_route) add/delete a route by way of cmd arg.
(zebra_interface_address_delete_read) collapsed into
zebra_interface_address_read.
(zebra_interface_address_delete_read) ditto.
(zebra_interface_address_read) read address add/delete messages
by way of type argument. Describe command message format.
(zebra_interface_add_read) Unconditionally read new ifmtu6 field.
Describe command message format.
(zebra_interface_state_read) Unconditionally read new ifmtu6 field.
(zclient_redistribute_set) Collapsed into zclient_redistribute
(zclient_redistribute_unset) ditto
(zclient_redistribute) set/unset redistribution.
(zclient_redistribute_default_set) Collapsed into
zclient_redistribute_default.
(zclient_redistribute_default_unset) ditto.
(zclient_redistribute_default) Redistribute default set/unset.
* zclient.h: delete zapi_ipv{4,6}_add, zapi_ipv{4,6}_delete. Add
zapi_ipv{4,6}_route. delete zclient_redistribute_set/unset. Add
zclient_redistribute. Ditto for
zclient_redistribute_default_{set/unset}.
|
|
|
|
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
* tests/test-sig.c: New file, regression test for sigevents.
* lib/Makefile.am: add sigevent.{c,h}
* (isis|rip|ripng|ospf|ospf6|bgp)d/\1_main.c: modify for sigevents.
* zebra/main.c: ditto.
|
|
track of on which interfaces joins have occurred. This is complicated
by the possible lack of a clear behavior spec on whether interfaces
keep their joined group lists across a down/up/down transition. (On
NetBSD, they do.)
2004-01-03 Greg Troxel <gdt@ahi.ir.bbn.com>
* ripng_interface.c (ripng_multicast_join): If IPV6_JOIN_GROUP
returns EADDRINUSE, consider the join successful. This happens
when an interface goes down and comes back because
ripng_multicast_leave does not invoke the LEAVE_GROUP operation if
the interface is down. Solves problem of ripng stopping working
on an interface which goes down and then comes back up (on NetBSD).
|
|
files, defaulting to sysconfdir (matching previous behavior).
This is needed to support (cleanly) NetBSD pkgsrc, which requires that
example config files go in $(prefix)/share/examples/pkgname, rather
than in $(prefix)/etc/pkgname.
|
|
* ripngd/ripngd.c: ripng_make_socket() add calls to raise/lower
privs.
|
|
* configure.ac: Check for fcntl()
* {bgpd,ospf,ospf6d,ripd,ripngd}/Makefile.am: Install conf file via
regular automake means, not magic install incantations, see
bug #38.
* lib/Makefile.am: install the headers, needed to link libzebra.a
(and hence libospf.a, OSPF-API, etc.)
|
|
* zebra/main.c: Fixup ZEBRA_{GROUP,USER} defines ->
QUAGGA_{USER,GROUP}
* bgpd/bgp_main.c: ditto
* ospf6d/ospf6_main.c: ditto
* ospfd/ospf_main.c: ditto
* ripd/rip_main.c: ditto
* ripngd/ripng_main.c: ditto
* zebra/main.c: ditto
|
|
* Add missing 'i' to getopts, short form of --pid_file.
see http://bugzilla.quagga.net/show_bug.cgi?id=25
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
* Merge of zebra privileges
|
|
|
|
make dist.
|
|
|
|
|
|
|
|
same idea as in lib/distribute.c to allow extract.pl to pick up commands
for vtysh.
|
|
Add the 'no interface' command to all the daemons and vtysh. now it's
possible to delete interface from routeing daemons as well only if it
doesn't exist in os.
http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
|
|
|
|
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch
Add the 'no interface' command to all the daemons and vtysh.
|
|
|
|
This one fixes "router xxx" node commands in vtysh. Don't get "unknown
command" error when entering "passive-interface eth0" command while
ospfd and ospf6d running etc.
|
|
http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch
Allows to extract.pl to pickup "route-map xxx in/out dev" commands for vtysh
(ripngd). As lib/if_rmap.[c|h] are used in ripngd only, I moved them to the
ripngd/ directory.
|
|
http://hasso.linux.ee/zebra/ht-routemap-18042003_5.patch
Trivial fixes to sync daemon's route-map commands to have same syntax. Fixes
a lot of errors with "match ..." and "set ..." commands when using vtysh.
|
|
Add ospfclient to ospfclient/.cvsignore
|
|
moved definition of the various socket paths from the
per daemon header files into configure.ac. it will set the paths to
be in the directory specified by --localstatedir=<prefix> or
otherwise will try to guess as best it can ( a la pid file path
detection - which probably should try reference ${prefix} too).
the present hardcoded socket path, /tmp, isnt really correct. should
be in /var somewhere really.
|
|
Developers working with the repository should have the appropriate tools.
Out-of-sync files cause far too many problems with users as well as auto*
scripts not being half as portable across systems as they ought to be.
make-dist exists for a reason.
Todo: make the CVS snapshot script do make-dist, and use the resulting
tarball as the snapshot.
|
