| Age | Commit message (Collapse) | Author |
|---|
|
Use the array_size() helper macro. Replaces several instances of local
macros with the same definition.
Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
|
|
* vtysh/vtysh.c: "end" should be printed at the bottom, not the top.
* vtysh/vtysh_config.c: PROTOCOL_NODE was not being handled, and thus was
being displayed at the top of a config, rather than in its rightful
place near the bottom.
Signed-off-by: Chris Caputo <ccaputo@alt.net>
|
|
If passed a bad command, return non-zero exit code
|
|
Add environment variable (VTYSH_LOG) for logging.
If a command fails, exit with non-zero exit code and don't
continue multipart commands.
|
|
The cmd_nodes used to configure vty, can mostly be static so
(basic data hiding 101).
|
|
2008-07-03 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
* extract.pl.in: Fix as-range to match CPP output.
* vtysh.c: Add missing router_bgp_view_cmd alias.
|
|
2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
* *.c: CMD_AS_RANGE was being used inside command strings, and thus
not being expanded, fix by dequoting.
|
|
2007-10-14 Paul Jakma <paul.jakma@sun.com>
* NEWS: Note that MRT dumps are now version 2
* (general) Merge in Juergen Kammer's AS4 patch.
2007-09-27 Paul Jakma <paul.jakma@sun.com>
* bgp_aspath.c: (assegment_normalise) remove duplicates from
from sets.
(aspath_reconcile_as4) disregard a broken part of the RFC around
error handling in path reconciliation.
* aspath_test.c: Test dupe-weeding from sets.
Test that reconciliation merges AS_PATH and AS4_PATH where
former is shorter than latter.
2007-09-26 Paul Jakma <paul.jakma@sun.com>
* aspath_test.c: Test AS4_PATH reconcilation where length
of AS_PATH and AS4_PATH is same.
2007-09-25 Paul Jakma <paul.jakma@sun.com>
* bgp_open.c: (peek_for_as4_capability) Fix to work.
* bgp_packet.c: (bgp_open_receive) Fix sanity check of as4.
* tests/bgp_capability_test.c: (general) Extend tests to validate
peek_for_as4_capability.
Add test of full OPEN Option block, with multiple capabilities,
both as a series of Option, and a single option.
Add some crap to beginning of stream, to prevent code depending
on getp == 0.
2007-09-18 Paul Jakma <paul.jakma@sun.com>
* bgp_open.c: (bgp_capability_as4) debug printf inline with others.
(peek_for_as4_capability) There's no need to signal failure, as
failure is better dealt with through full capability parser -
just return the AS4, simpler.
* bgp_packet.c: (bgp_open_receive) Update to match
peek_for_as4_capability change.
Allow use of BGP_AS_TRANS by 2b speakers.
Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors.
(bgp_capability_msg_parse) missing argument to debug print
(bgp_capability_receive) missing return values.
* tests/bgp_capability_test.c: (parse_test) update for changes to
peek_for_as4_capability
2007-07-25 Paul Jakma <paul.jakma@sun.com>
* Remove 2-byte size macros, just make existing macros take
argument to indicate which size to use.
Adjust all users - typically they want '1'.
* bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any
as4's in a path.
(aspath_put) Return the number of bytes actually written, to
fix the bug Juergen noted: Splitting of segments will change
the number of bytes written from that already written to the
AS_PATH header.
(aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP
is still defined as 2b.
(aspath_aggregate) fix latent bug.
(aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation
function.
(aspath_key_make) Hash the AS_PATH string, rather than
just taking the addition of assegment ASes as the hash value,
hopefully sligthly more collision resistant.
(bgp_attr_munge_as4_attrs) Collide the NEW_ attributes
together with the OLD 2-byte forms, code Juergen
had in bgp_attr_parse but re-organised a bit.
(bgp_attr_parse) Bunch of code from Juergen moves
to previous function.
(bgp_packet_attribute) Compact significantly by
just /always/ using extended-length attr header.
Fix bug Juergen noted, by using aspath_put's
(new) returned size value for the attr header rather
than the (guesstimate) of aspath_size() - the two could
differ when aspath_put had to split large segments, unlikely
this bug was ever hit in the 'wild'.
(bgp_dump_routes_attr) Always use extended-len and
use aspath_put return for header length. Output 4b ASN
for AS_PATH and AGGREGATOR.
* bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix
hash callback declarations to match prototypes.
(ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4,
complete rewrite of Juergen's changes (no asdot support)
* bgp_open.c: (bgp_capability_as4) New, does what it says
on the tin.
(peek_for_as4_capability) Rewritten to use streams and
bgp_capability_as4.
* bgp_packet.c: (bgp_open_send) minor edit
checked (in the abstract at least) with Juergen.
Changes are to be more accepting, e.g, allow AS_TRANS on
a 2-byte session.
* (general) Update all commands to use CMD_AS_RANGE.
* bgp_vty.c: (bgp_clear) Fix return vals to use CMD_..
Remove stuff replicated by VTY_GET_LONG
(bgp_clear_vty) Return bgp_clear directly to vty.
* tests/aspath_test.c: Exercise 32bit parsing. Test reconcile
function.
* tests/ecommunity_test.c: New, test AS4 ecommunity changes,
positive test only at this time, error cases not tested yet.
2007-07-25 Juergen Kammer <j.kammer@eurodata.de>
* (general) AS4 support.
* bgpd.h: as_t changes to 4-bytes.
* bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines.
* bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE
added for 2-byte.
Add AS16 versions of length calc macros.
(aspath_count_numas) New, count number of ASes.
(aspath_has_as4) New, return 1 if there are any as4's in a
path.
(assegments_parse) Interpret assegment as 4 or 2 byte,
according to how the caller instructs us, with a new
argument.
(aspath_parse) Add use32bit argument to pass to
assegments_parse. Adjust all its callers to pass 1, unless
otherwise noted.
(assegment_data_put) Adjust to be able to write 2 or 4 byte
AS, according to new use32bit argument.
(aspath_put) Adjust to write 2 or 4.
(aspath_gettoken) Use a long for passed in asno.
* bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and
BGP_ATTR_AS4_AGGREGATOR.
(bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as
determined by received-capability flag.
(bgp_attr_aspath_check) New, code previously in attr_aspath
but moved to new func so it can be run after NEW_AS_PATH
reconciliation.
(bgp_attr_as4_path) New, handle NEW_AS_PATH.
(bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes.
(bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR.
(bgp_attr_parse) Add handoffs to previous parsers for the two
new AS4 NEW_ attributes.
Various checks added for NEW/OLD reconciliation.
(bgp_packet_attribute) Support 2/4 for AS_PATH and
AGGREGATOR, detect when NEW_ attrs need to be sent.
* bgp_debug.{c,h}: Add 'debug bgp as4'.
* bgp_dump.c: MRTv2 support, unconditionally enabled, which
supports AS4. Based on patches from Erik (RIPE?).
* bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4
support.
* bgp_open.c: (peek_for_as4_capability) New, peek for AS4
capability prior to full capability parsing, so we know which
ASN to use for struct peer lookup.
(bgp_open_capability) Always send AS4 capability.
* bgp_packet.c: (bgp_open_send) AS4 handling for AS field
(bgp_open_receive) Peek for AS4 capability first, and figure
out which AS to believe.
* bgp_vty.c: (bgp_show_peer) Print AS4 cap
* tests/aspath_test.c: Support asn32 changes, call aspath_parse
with 16 bit.
* vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER
* vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER
* vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
|
|
2007-06-20 Nicolas Deffayet <nicolas@deffayet.com>
* vtysh.c: (vtysh_write_terminal) Write 'end' when done,
to be consistent with telnet vty, and expected by tools
like rancid.
|
|
2007-05-09 Paul Jakma <paul.jakma@sun.com>
* configure.ac: sys/conf.h depends on sys/param.h, at least on
FBSD 6.2.
(bug #363) Should check for in_pktinfo for IRDP
2006-05-27 Paul Jakma <paul.jakma@sun.com>
* configure.ac: General cleanup of header and type checks, introducing
an internal define, QUAGGA_INCLUDES, to build up a list of
stuff to include so as to avoid 'present but cant be compiled'
warnings.
Misc additional checks of things missing according to autoscan.
Add LIBM, for bgpd's use of libm, so as to avoid burdening
LIBS, and all the binaries, with libm linkage.
Remove the bad practice of using m4 changequote(), just
quote the []'s in the case statements properly.
This should fix bugs 162, 303 and 178.
* */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced
HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN,
* bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
|
|
2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vtysh.c: (vtysh_log_timestamp_precision,
no_vtysh_log_timestamp_precision) Implement new log timestamp
precision commands: send to all daemons.
(vtysh_init_vty) Install new log timestamp precision commands.
|
|
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vtysh.1: Document new options -d and -E, and note that now multiple
-c options may be supplied, with embedded linefeed now supported.
In BUGS section, remove warning about vtysh causing a daemon
to freeze, since this has been fixed.
* vtysh_main.c: (usage) Add new -d and -E options. And note that
-c can be used multiple times, possibly with embedded linefeeds.
(longopts) Add new -d and -E options.
(main) Add new -d and -E options, and create a linked list to
support multiple -c options. Do not call vtysh_connect_all until
after vtysh_read_config(config_default) and vtysh_auth have
succeeded. This prevents the vtysh.conf file from configuring
any daemons, and it ensures that authentication has been passed
before we send any commands to any daemons. Call vtysh_connect_all
with any daemon name supplied with -d. If it is unable to connect
to any daemons, issue an error message and exit immediately.
When used in -c mode, call vtysh_execute("enable") before
executing the commands in order to match interactive behavior.
And detect embedded linefeed chars in -c commands and break them up
appropriately.
* vtysh.h: (vtysh_connect_all) Fix proto to reflect new
daemon_name argument, and that it now returns an integer -- the
number of daemons to which we were able to connect.
* vtysh.c: (vtysh_connect_all) Add a new daemon_name argument.
If supplied, connect only to that daemon. And return
the number of daemons to which we were able to connect.
(vtysh_prompt): Performance enhancement -- make struct utsname
static so we call uname to get the hostname only once.
|
|
2006-05-24 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (general) Add 'show memory' command.
|
|
2006-05-21 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (vtysh_show_logging_cmd) Suppress output for daemons
which are not running (Andrew Schorr).
|
|
2006-05-17 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (general) Add 'show logging' command.
|
|
* vtysh.c: (vtysh_config_from_file) fix regression from
a previous cleanup, vtysh_client.flags and cmd->daemon are
bitwise flags, bitwise & was meant to be used. Fixes breakage
of integrated config file reading.
|
|
* extract.pl.in: Fix warning - add isisd/topology to the includes.
|
|
* vtysh.c: Add support for BGP_IPV6M_NODE
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes
for functions with no arguments (must specify argument list as void).
* vtysh.c: Enhance vtysh_client array to include the daemon's name
and bitmask and socket path (in addition to the fd). This allows
us to use loop constructs for various operations that need to be
applied to all client daemons, and it facilitates better error
messages. Also fix some prototypes with void argument lists.
(vclient_close) Issue a warning message indicating which daemon's
socket is being closed.
(vtysh_execute_func,vtysh_config_from_file) Use a for loop to
call vtysh_client_execute.
(vtysh_write_terminal,write_config_integrated) Use a for loop to
call vtysh_client_config.
(vtysh_write_memory) Use a for loop to call vtysh_client_execute.
(vtysh_show_daemons) Use a for loop.
(vtysh_connect) The struct vtysh_client is now statically initialized,
so do not initialize it here.
(vtysh_connect_all) Use a for loop to call vtysh_connect. Set
ripd_client pointer for use in vtysh_exit_ripd_only.
|
|
use it as well.
* vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already
works in vty.
|
|
to walk up in the node tree if called from vtysh. Different daemons
might have commands with same syntax in different nodes (for example
"router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons).
* vtysh.c: Reflect changes in lib. cmd_execute_command() should know
now that it's called from vtysh and must not attempt to walk up in
the node tree.
[pullup candidate]
|
|
* vtysh.c: (vtysh_connect) No reason to call geteuid and getegid,
the results were never used.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
* vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing
'\0' chars and command return code.
|
|
|
|
if I exit" issue.
|
|
* vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and
final sync byte is not ASCII NULL, it's actually a status integer,
and only ASCII NULL if CMD_SUCCESS is returned by daemon.
Fix pointed out by Hasso.
|
|
|
|
|
|
|
|
|
|
* vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily
split across reads, dont get confused by this and block forever.
|
|
|
|
|
|
|
|
|
|
reorganization of this spagetti will follow soon.
|
|
|
|
from vtysh ([quagga-dev 932]).
|
|
|
|
* configure.ac (and everywhere a regular file is opened for
writing): use file permissions from configure rather than
compiled-in umask.
|
|
|
|
|
|
|
|
Add the 'no interface' command to all the daemons and vtysh. now it's
possible to delete interface from routeing daemons as well only if it
doesn't exist in os.
http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
|
|
|
|
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch
Add the 'no interface' command to all the daemons and vtysh.
|
