| Age | Commit message (Collapse) | Author |
|---|
|
2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vtysh.c: (vtysh_log_timestamp_precision,
no_vtysh_log_timestamp_precision) Implement new log timestamp
precision commands: send to all daemons.
(vtysh_init_vty) Install new log timestamp precision commands.
|
|
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vtysh.1: Document new options -d and -E, and note that now multiple
-c options may be supplied, with embedded linefeed now supported.
In BUGS section, remove warning about vtysh causing a daemon
to freeze, since this has been fixed.
* vtysh_main.c: (usage) Add new -d and -E options. And note that
-c can be used multiple times, possibly with embedded linefeeds.
(longopts) Add new -d and -E options.
(main) Add new -d and -E options, and create a linked list to
support multiple -c options. Do not call vtysh_connect_all until
after vtysh_read_config(config_default) and vtysh_auth have
succeeded. This prevents the vtysh.conf file from configuring
any daemons, and it ensures that authentication has been passed
before we send any commands to any daemons. Call vtysh_connect_all
with any daemon name supplied with -d. If it is unable to connect
to any daemons, issue an error message and exit immediately.
When used in -c mode, call vtysh_execute("enable") before
executing the commands in order to match interactive behavior.
And detect embedded linefeed chars in -c commands and break them up
appropriately.
* vtysh.h: (vtysh_connect_all) Fix proto to reflect new
daemon_name argument, and that it now returns an integer -- the
number of daemons to which we were able to connect.
* vtysh.c: (vtysh_connect_all) Add a new daemon_name argument.
If supplied, connect only to that daemon. And return
the number of daemons to which we were able to connect.
(vtysh_prompt): Performance enhancement -- make struct utsname
static so we call uname to get the hostname only once.
|
|
2006-05-24 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (general) Add 'show memory' command.
|
|
2006-05-21 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (vtysh_show_logging_cmd) Suppress output for daemons
which are not running (Andrew Schorr).
|
|
2006-05-17 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (general) Add 'show logging' command.
|
|
* vtysh.c: (vtysh_config_from_file) fix regression from
a previous cleanup, vtysh_client.flags and cmd->daemon are
bitwise flags, bitwise & was meant to be used. Fixes breakage
of integrated config file reading.
|
|
* extract.pl.in: Fix warning - add isisd/topology to the includes.
|
|
* vtysh.c: Add support for BGP_IPV6M_NODE
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes
for functions with no arguments (must specify argument list as void).
* vtysh.c: Enhance vtysh_client array to include the daemon's name
and bitmask and socket path (in addition to the fd). This allows
us to use loop constructs for various operations that need to be
applied to all client daemons, and it facilitates better error
messages. Also fix some prototypes with void argument lists.
(vclient_close) Issue a warning message indicating which daemon's
socket is being closed.
(vtysh_execute_func,vtysh_config_from_file) Use a for loop to
call vtysh_client_execute.
(vtysh_write_terminal,write_config_integrated) Use a for loop to
call vtysh_client_config.
(vtysh_write_memory) Use a for loop to call vtysh_client_execute.
(vtysh_show_daemons) Use a for loop.
(vtysh_connect) The struct vtysh_client is now statically initialized,
so do not initialize it here.
(vtysh_connect_all) Use a for loop to call vtysh_connect. Set
ripd_client pointer for use in vtysh_exit_ripd_only.
|
|
use it as well.
* vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already
works in vty.
|
|
to walk up in the node tree if called from vtysh. Different daemons
might have commands with same syntax in different nodes (for example
"router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons).
* vtysh.c: Reflect changes in lib. cmd_execute_command() should know
now that it's called from vtysh and must not attempt to walk up in
the node tree.
[pullup candidate]
|
|
* vtysh.c: (vtysh_connect) No reason to call geteuid and getegid,
the results were never used.
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
* vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing
'\0' chars and command return code.
|
|
|
|
if I exit" issue.
|
|
* vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and
final sync byte is not ASCII NULL, it's actually a status integer,
and only ASCII NULL if CMD_SUCCESS is returned by daemon.
Fix pointed out by Hasso.
|
|
|
|
|
|
|
|
|
|
* vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily
split across reads, dont get confused by this and block forever.
|
|
|
|
|
|
|
|
|
|
reorganization of this spagetti will follow soon.
|
|
|
|
from vtysh ([quagga-dev 932]).
|
|
|
|
* configure.ac (and everywhere a regular file is opened for
writing): use file permissions from configure rather than
compiled-in umask.
|
|
|
|
|
|
|
|
Add the 'no interface' command to all the daemons and vtysh. now it's
possible to delete interface from routeing daemons as well only if it
doesn't exist in os.
http://hasso.linux.ee/zebra/ht-no_interface_fix.patch
|
|
|
|
http://hasso.linux.ee/zebra/ht-no_interface-23052003.patch
Add the 'no interface' command to all the daemons and vtysh.
|
|
Subject: [zebra 19125] vtysh bogus perms check
vtysh checks that the zebra.vty socket uid is == to its own euid, this is
bogus - let the kernel decide whether permissions match, vtysh shouldnt
try second guess. (this becomes noticeable when neither zebra nor vtysh
are run as root :) )
|
|
Subject: [zebra 18941] Re: [PATCH] misc patch
Program shouldn't terminate on pager execution failure. We can also use
"PAGER" environment variable - it's very common.
|
|
http://hasso.linux.ee/zebra/ht-routemap-18042003_5.patch
Trivial fixes to sync daemon's route-map commands to have same syntax. Fixes
a lot of errors with "match ..." and "set ..." commands when using vtysh.
|
|
(following from initial patches by Amir & Sergey Vyshnevetskiy ([zebra
18689])
|
|
|
|
|
|
* sync to latest zebra CVS
* spec file: updated and added define for ospf-api/client
NB: OSPF-API has been broken by the zebra.org changes, which
has added struct ospf * as a new arg to many functions
|
|
|
|
|
|
(needed, eg, for Darwin).
Kris Foster <kris@krweb.net>
|
|
per-daemon and/or integrated config file
|
