summaryrefslogtreecommitdiff
path: root/vtysh
AgeCommit message (Collapse)Author
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-11-202004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c needs to include "log.h" to pick up the declaration.
2004-11-112004-11-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing '\0' chars and command return code.
2004-11-02- Add .arch-ids and .arch-inventory to cvsignore, to allow one to use archpaul
with CVS trees.
2004-10-28"show running-daemons" -> "show daemons".hasso
2004-10-20Don't popen pager if command is "exit". Fixes "vtysh screws up my terminalhasso
if I exit" issue.
2004-10-13- fix date in changelog of my last commit..paul
2004-10-13All access lists (IPv4 and IPv6) are used by all daemons to limit access tohasso
vty.
2004-10-112004-09-17 Paul Jakma <paul@dishone.st>paul
* vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and final sync byte is not ASCII NULL, it's actually a status integer, and only ASCII NULL if CMD_SUCCESS is returned by daemon. Fix pointed out by Hasso.
2004-10-11Fix warnings here.hasso
2004-10-07Vtysh compiles cleanly as well.hasso
2004-10-03Big vtysh cleanup. See changelogs for details.hasso
2004-09-26Compiler warning fix.hasso
2004-09-172004-09-17 Paul Jakma <paul@dishone.st>paul
* vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily split across reads, dont get confused by this and block forever.
2004-09-132004-09-13 Paul Jakma <paul@dishone.st>paul
* Makefile.am: remove zebra/irdp.c from list - dead. * extract.pl.in: Substitute in the autoconf srcdir/builddir paths for includes to cpp.
2004-09-132004-09-13 Paul Jakma <paul@dishone.st>paul
* Makefile.am: extract.pl isnt in srcdir, it's always in the builddir. * extract.pl.in: match on end of filenames, filename could contain various preamble due to out of tree builds.
2004-08-31remove zebra/irdp.c because it is no longer in the source tree.gdt
2004-08-28Port ospf6d to sigevent and rename signal handling functions in vtysh not tohasso
conflict the ones in lib/sigevent.c. Fixes compiling with --disable-shared.
2004-08-27Brown paperbag, please. Don't segfault if VTYSH_PAGER isn't defined.hasso
2004-08-27Make "terminal length <0-512>" command work in vtysh.hasso
2004-08-26More vtysh fixes. Specifying configuration from command line works now.hasso
2004-08-26Vtysh cleanup part 2. No any functional changes yet except VTYSH_INTERFACE.hasso
2004-08-25Cleaning up whitespace mess mostly caused by my patches. Biggerhasso
reorganization of this spagetti will follow soon.
2004-07-23add .libsgdt
2004-07-23(somewhat unrelated cleanups, but all are very minor)gdt
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com> * */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir -lfoo", to avoid linking against installed libraries from a previous version. * {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared library version number to be 0.0 * configure.ac: remove spurious , so extract.pl is chmod'd +x. * HACKING: explain shared library versioning rules
2004-07-09more cvsignorespaul
2004-06-30Add libtool support.gdt
libzebra and libospfapiclient are now built shared, and linked shared with the daemons. This reduces the memory needed when running multiple daemons; each daemon is at least 150k smaller. Static libraries are still built, and libtool should use them on platforms which don't have shared libaries. As with autoconf, the user of a distribution does not need libtool; one just needs that to build from CVS. libospf.a is still a non-shared library, and still installed, not because that makese sense, but because I don't understand why it is the way it is now. Note that the tree was tagged 'libtool-before' just before this commit.
2004-06-30Make vtysh work on NetBSD, and minor cleanups:gdt
if --enable-vtysh, look for perl, and substitute into vtysh/extract.pl, rather than assuming perl is in /usr/bin Look for tputs in libtermcap and libcurses, in addition to previously-searched locations. Follow GNU readlines search order. Clean up --enable-vtysh definition in configure.ac. Add vtysh/vtysh_cmds.c to CLEANFILES. This is important if extract.pl fails, so that 'make clean && make' will regenerate vtysh_cmds.c rhather than using the old zero-length file.
2004-06-20Zebra daemon has access lists.hasso
2004-06-06CVS ignore Linux NFS silly-delete .nfs* filespaul
2004-05-09Workaround for Bugzilla #58.hasso
2004-04-06Vtysh fixes:hasso
* replace -e with -c * don't save command in history if last line is the same one * doc/help fixes
2004-03-162004-03-16 David Young <dyoung@pobox.com>gdt
* (many) reference <lib/version.h> rather than "version.h", because version.h is a generated file and not present in the source tree when using objdir builds. (committed by gdt) works fine with normal builds; didn't try objdir
2004-03-04Many warning fixes from PC Drew ([quagga-dev 940]) and removing using PAGERhasso
from vtysh ([quagga-dev 932]).
2004-01-152004-01-15 Paul Jakma <paul@dishone.st>paul
* vtysh_config.c: Fix up strlen to use correct string.
2003-12-23Changelog entry about isisd integration. Sorry about previous commithasso
without message. Fingers worked faster than brain ;(.
2003-12-23*** empty log message ***hasso
2003-12-222003-12-22 Christian Hammers <ch@lathspell.de>gdt
* configure.ac (and everywhere a regular file is opened for writing): use file permissions from configure rather than compiled-in umask.
2003-12-03Add support for --enable-exampledir to specify where to place examplegdt
files, defaulting to sysconfdir (matching previous behavior). This is needed to support (cleanly) NetBSD pkgsrc, which requires that example config files go in $(prefix)/share/examples/pkgname, rather than in $(prefix)/etc/pkgname.
2003-10-242003-10-24 waldi@debian.orgpaul
* vtysh/Makefile.am: vtysh_cmd.c rebuild was broken because it depended against source files without specification, i.e. it used ../zebra instead of $(top_srcdir)/zebra.
2003-10-222003-10-22 Paul Jakma <paul@dishone.st>paul
* vtysh/Makefile.am: do not include vtysh_cmd.c in dists, its configure dependent. (still need to find a way to make building of it dependent on configure options or include all commands.)
2003-08-132003-08-13 Paul Jakma <paul@dishone.st>paul
* vtysh/vtysh_user.c: include lib/version.h, for QUAGGA_PROGNAME.
2003-08-132003-08-13 Paul Jakma <paul@dishone.st>paul
* lib/version.h: Add QUAGGA_PROGNAME * lib/smux.c: hardcoded zebra/quagga -> QUAGGA_PROGNAME * lib/command.c: ditto * vtysh/vtysh_user.c: ditto
2003-07-122003-07-12 Paul Jakma <paul@dishone.st>paul
* vtysh/Makefile.am: explicitely list the files required for vtysh_cmd.c to be generated, to minimise spurious rebuilds.
2003-06-25Add IPv6 ping and traceroute.hasso
2003-06-042003-06-04 Paul Jakma <paul@dishone.st>paul
* Merge of zebra privileges
2003-05-25RIP has now "route-map x [in|out] <interface>" as well.hasso
2003-05-25Just "write" command without any parameters writes conf to file.hasso
2003-05-24Revert my http://hasso.linux.ee/zebra/ht-ifrmap-14042003.patch patch. Usedhasso
same idea as in lib/distribute.c to allow extract.pl to pick up commands for vtysh.
2003-05-23slight addition to hasso's previous no_interface patch.paul