| Age | Commit message (Collapse) | Author |
|---|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c
needs to include "log.h" to pick up the declaration.
|
|
* vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing
'\0' chars and command return code.
|
|
with CVS trees.
|
|
|
|
if I exit" issue.
|
|
|
|
vty.
|
|
* vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and
final sync byte is not ASCII NULL, it's actually a status integer,
and only ASCII NULL if CMD_SUCCESS is returned by daemon.
Fix pointed out by Hasso.
|
|
|
|
|
|
|
|
|
|
* vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily
split across reads, dont get confused by this and block forever.
|
|
* Makefile.am: remove zebra/irdp.c from list - dead.
* extract.pl.in: Substitute in the autoconf srcdir/builddir paths
for includes to cpp.
|
|
* Makefile.am: extract.pl isnt in srcdir, it's always in the
builddir.
* extract.pl.in: match on end of filenames, filename could contain
various preamble due to out of tree builds.
|
|
|
|
conflict the ones in lib/sigevent.c. Fixes compiling with --disable-shared.
|
|
|
|
|
|
|
|
|
|
reorganization of this spagetti will follow soon.
|
|
|
|
2004-07-23 Greg Troxel <gdt@poblano.ir.bbn.com>
* */Makefile.am: Use ../dir/libfoo.la, rather than "-L../dir
-lfoo", to avoid linking against installed libraries from a
previous version.
* {lib,ospfd,ospfclient}/Makefile.am: explicitly define the shared
library version number to be 0.0
* configure.ac: remove spurious , so extract.pl is chmod'd +x.
* HACKING: explain shared library versioning rules
|
|
|
|
libzebra and libospfapiclient are now built shared, and linked shared
with the daemons. This reduces the memory needed when running
multiple daemons; each daemon is at least 150k smaller. Static
libraries are still built, and libtool should use them on platforms
which don't have shared libaries. As with autoconf, the user of a
distribution does not need libtool; one just needs that to build from
CVS.
libospf.a is still a non-shared library, and still installed, not
because that makese sense, but because I don't understand why it is
the way it is now.
Note that the tree was tagged 'libtool-before' just before this commit.
|
|
if --enable-vtysh, look for perl, and substitute into vtysh/extract.pl,
rather than assuming perl is in /usr/bin
Look for tputs in libtermcap and libcurses, in addition to
previously-searched locations. Follow GNU readlines search order.
Clean up --enable-vtysh definition in configure.ac.
Add vtysh/vtysh_cmds.c to CLEANFILES. This is important if
extract.pl fails, so that 'make clean && make' will regenerate
vtysh_cmds.c rhather than using the old zero-length file.
|
|
|
|
|
|
|
|
* replace -e with -c
* don't save command in history if last line is the same one
* doc/help fixes
|
|
* (many) reference <lib/version.h> rather than "version.h",
because version.h is a generated file and not present in the
source tree when using objdir builds.
(committed by gdt)
works fine with normal builds; didn't try objdir
|
|
from vtysh ([quagga-dev 932]).
|
|
* vtysh_config.c: Fix up strlen to use correct string.
|
|
without message. Fingers worked faster than brain ;(.
|
|
|
|
* configure.ac (and everywhere a regular file is opened for
writing): use file permissions from configure rather than
compiled-in umask.
|
|
files, defaulting to sysconfdir (matching previous behavior).
This is needed to support (cleanly) NetBSD pkgsrc, which requires that
example config files go in $(prefix)/share/examples/pkgname, rather
than in $(prefix)/etc/pkgname.
|
|
* vtysh/Makefile.am: vtysh_cmd.c rebuild was broken because it
depended against source files without specification, i.e. it
used ../zebra instead of $(top_srcdir)/zebra.
|
|
* vtysh/Makefile.am: do not include vtysh_cmd.c in dists, its
configure dependent. (still need to find a way to make building of
it dependent on configure options or include all commands.)
|
|
* vtysh/vtysh_user.c: include lib/version.h, for QUAGGA_PROGNAME.
|
|
* lib/version.h: Add QUAGGA_PROGNAME
* lib/smux.c: hardcoded zebra/quagga -> QUAGGA_PROGNAME
* lib/command.c: ditto
* vtysh/vtysh_user.c: ditto
|
|
* vtysh/Makefile.am: explicitely list the files required for
vtysh_cmd.c to be generated, to minimise spurious rebuilds.
|
|
|
|
* Merge of zebra privileges
|
|
|
|
|
|
same idea as in lib/distribute.c to allow extract.pl to pick up commands
for vtysh.
|
|
|
