summaryrefslogtreecommitdiff
path: root/zebra/ChangeLog
AgeCommit message (Collapse)Author
2007-05-30[zebra] Trivial patches so we can compile when IPv6 is not enabledAndrew J. Schorr
2007-05-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * zebra_routemap.c: (route_set_src_compile) Use '#ifdef HAVE_IPV6' as needed. * zebra_vty.c: (vty_show_ip_route_detail, vty_show_ip_route) Use '#ifdef HAVE_IPV6' as needed. (show_ip_protocol) Move function definition outside of '#ifdef HAVE_IPV6' section.
2007-05-17[PtP] Fix BSD problems with PtP interfaces: must treat RTA_BRD as peer addressAndrew J. Schorr
2007-05-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * kernel_socket.c: (ifam_read_mesg) Grab RTA_DST and RTA_GATEWAY addresses from the message (if present, which seems unlikely on current BSD platforms), and show them in the debug messages. Also, add ifam_flags to the debug messages. (ifam_read) If the interface is point-to-point, then the RTA_BRD address should be treated as a peer address.
2007-05-02[zebra] Routemap support on received routes, with 'set src' command (linux)Paul Jakma
2007-05-01 David L Stevens <dlstevens@us.ibm.com> * (general) These changes collectively add route-map and prefix-list support to zebra and fix a bug in "show route-map" (with no argument). * doc/main.texi: added route-map, prefix-list, ip protocol and set src documentation * lib/command.h: added PROTOCOL_NODE type * lib/log.c: (proto_name2num) new function, protocol name to number translation. * lib/routemap.c: (vty_show_route_map) fixed "show route-map" without route-map name * lib/routemap.h: added RMAP_ZEBRA type * lib/zebra.h: added proto_name2num() prototype * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and plist * vtysh/Makefile.am: added zebra_routemap.c * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP * zebra/connected.c: (connected_up_ipv4) added src preference argument to rib_add_ipv4() * zebra/kernel_socket.c: (rtm_read) ditto * zebra/main.c: added prefix list initialization * zebra/Makefile.am: added zebra_routemap.c source file * zebra/rib.h: added generic address union "g_addr" and use in existing places that had an explicit union. Added "src" to struct nexthop. Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4. * zebra/rt_netlink.c: (netlink_routing_table) set preferred source on netlink messages. (netlink_route_change) ditto (netlink_route_multipath) ditto. * zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to rib_add_ipv4() call. * zebra/rtread_proc.c: (proc_route_read) ditto * zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument. (nexthop_ipv4_ifindex_add) ditto (rib_add_ipv4) ditto (nexthop_active_check) Add route-map processing. * zebra/zebra_routemap.c: new file for zebra route-map commands. * zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol (vty_show_ip_route_detail) added "src" printing (vty_show_ip_route) ditto (show_ip_protocol_cmd) new command, list routemaps. (config_write_protocol) write out routemap protocl config. (zebra_vty_init) Install the new routemap protocol commands. * zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg (zebra_init) init zebra route-maps. * zebra/zserv.h: add zebra_route_map_init
2007-04-29[zebra/solaris] fix if_get_index passing wrong arg to lifreq_set_namePaul Jakma
2007-04-29 Paul Jakma <paul.jakma@sun.com> * if_ioctl_solaris.c: (if_get_index) Fix bogus argument passed to lifreq_set_name().
2007-04-29[zebra] Fix merge error in previous solaris changesetPaul Jakma
2007-04-29 Paul Jakma <paul.jakma@sun.com> * ioctl{_solaris,}.c: (if_get_mtu) Fix missing ; in last commit.
2007-04-10[zebra] MTU change should propogate to zserv client on BSD/SolarisPaul Jakma
2007-04-10 Paul Jakma <paul.jakma@sun.com> * ioctl{_solaris,}.c: (if_get_mtu) Ping clients via zebra_interface_up_update if MTU is changed.
2007-04-10[zebra] Retain configured IPv4 address upon removal by kernelPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * interface.c: (if_delete_update) Address removal triggered by kernel shouldn't remove configured IPv4 address from connected list.
2007-04-10[testzebra] stubs should call kernel_address_add on IP address installPaul Jakma
2007-04-08 Paul Jakma <paul.jakma@sun.com> * {ioctl,kernel}_null.c: Install of IP address should reflect back to zebra via kernel_address_add..., makes testzebra more useful.
2007-04-10[zebra] Bug #351: Don't redistribute routes to ipv4 link-local prefixesPaul Jakma
2007-04-07 Paul Jakma <paul.jakma@sun.com> * lib/prefix.h: Add define to match IPv4 Link-Local addresses * zebra/redistribute.c: (zebra_check_addr) Don't redistribute routes to IPv4 link-local prefixes, fixes bug #351. * zebra/redistribute.h: Export zebra_check_addr. * zebra/router-id.c: (router_id_bad_address) re-use zebra_check_addr rather than implementing similar logic.
2007-03-06[zebra] Fix interface metric bug on BSDPaul Jakma
2007-03-06 Paul Jakma <paul.jakma@sun.com> * kernel_socket.c: (ifam_read) Do not update interface metric on receipt of NEW/DEL ADDR messages, bogus as: a) some systems dont include iface metric for address events b) we didn't update clients either. Initial diagnosis by Eugene Grosbein.
2007-02-26[zebra] IRDP should ignore non-IPv4 addressesPaul Jakma
2007-02-26 Robert Olsson <Robert.Olsson@data.slu.se> * irdp_main.c: (irdp_send_thread) Skip non-AF_INET addresses, i.e. do not try interpret IPv6 addresses as IPv4 addresses to broadcast in IRDP announcements..
2006-12-13[zebra] For solaris IPv6 PtP interfaces, try to support prefixlen != 128Andrew J. Schorr
2006-12-13 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if_ioctl_solaris.c: (if_get_addr) For IPv6, stop assuming that all IFF_POINTOPOINT have prefixlen of IPV6_MAX_BITLEN. Instead, always try the SIOCGLIFSUBNET ioctl; if that fails, then we fall back to IPV6_MAX_BITLEN for PtP interfaces.
2006-12-12[PtP over ethernet] New peer flag allows much more addressing flexibilityAndrew J. Schorr
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating whether a peer address has been configured. Comment now shows the new interpretation of the destination addr: if ZEBRA_IFA_PEER is set, then it must contain the destination address, otherwise it may contain the broadcast address or be NULL. (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete macros that were specific to IPv4 and not fully general. (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag. (CONNECTED_PREFIX) New macro giving the prefix to insert into the RIB: if CONNECTED_PEER, then use the destination (peer) address, else use the address field. (CONNECTED_ID) New macro to come up with an identifying address for the struct connected. * if.c: (if_lookup_address, connected_lookup_address) Streamline logic with new CONNECTED_PREFIX macro. * prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros for better performance than the general prefix_copy function. * zclient.c: (zebra_interface_address_read) For non-null destination addresses, set prefixlen to equal the address prefixlen. This is needed to get the new CONNECTED_PREFIX macro to work properly. * connected.c: (connected_up_ipv4, connected_down_ipv4, connected_up_ipv6, connected_down_ipv6) Simplify logic using the new CONNECTED_PREFIX macro. (connected_add_ipv4) Set prefixlen in destination addresses (required by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead of testing for IFF_POINTOPOINT. Delete invalid warning message. Warn about cases where the ZEBRA_IFA_PEER is set but no destination address has been supplied (and turn off the flag). (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning. Set prefixlen in destination address so CONNECTED_PREFIX will work. * connected.h: (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. * interface.c: (connected_dump_vty) Use CONNECTED_PEER macro to decide whether the destination address is a peer or broadcast address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT). * if_ioctl.c: (if_getaddrs) Instead of setting a peer address only when the IFF_POINTOPOINT is set, we now accept a peer address whenever it is available and not the same as the local address. Otherwise (no peer address assigned), we check for a broadcast address (regardless of the IFF_BROADCAST flag). And must now pass a flags value of ZEBRA_IFA_PEER to connected_add_ipv4 when a peer address is assigned. The same new logic is used with the IPv6 code as well (and we pass the new flags argument to connected_add_ipv6). (if_get_addr) Do not bother to check IFF_POINTOPOINT: just issue the SIOCGIFDSTADDR ioctl and see if we get back a peer address not matching the local address (and set the ZEBRA_IFA_PEER in that case). If there's no peer address, try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set. * if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl without bothering to check the IFF_POINTOPOINT flag. And if no peer address was found, just try the SIOCGLIFBRDADDR ioctl without checking the IFF_BROADCAST flag. Call connected_add_ipv4 and connected_add_ipv6 with appropriate flags. * if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to connected_add_ipv6. * kernel_socket.c: (ifam_read) Must pass new flags argument to connected_add_ipv6. * rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2 to determine local and possible peer address (so there's no longer a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately. Pass new flags argument to connected_add_ipv6. (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast to determine whether the connected destination address is a broadcast address. * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) Simplify logic by using new CONNECTED_PREFIX macro. * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX macro. * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX macro, both options collapse into the same code. * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new CONNECTED_ID macro. (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX macro. * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro instead of testing the IFF_POINTOPOINT flag. * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro instead of testing with if_is_pointopoint. And add commented-out code to implement alternative (in my opinion) more elegant behavior that has no special-case treatment for PtP addresses. (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID macro to simplify logic. (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does not give a useful result if prefixlen is 32 (we require a peer address in such cases). * ripd.c: (rip_update_interface) Fix same bug as above.
2006-12-08[zebra] Changes of nexthops of static routes didnt take effectPaul Jakma
2006-12-08 Piotr Chytla <pch@packetconsulting.pl> * zebra_rib.c: (static_install_ipv{4,6}) Case where existing RIB is updated must explicitely rib_addqueue the route_node, to ensure the update actually takes effect.
2006-09-132006-09-13 Tom Everett <tom@khubla.com>Greg Troxel
* kernel_socket.c (rtm_type_str): ifdef RTM_OLD{ADD,DEL} to compile on systems that no longer define them.
2006-08-06[zebra] trivial: rtadv.h depends on interface.hPaul Jakma
2006-08-06 Paul Jakma <paul.jakma@sun.com> * rtadv.h: depends on interface.h, so should include it.
2006-08-06[zebra] fix inconsistencies in ifstat_update_* declarations and definitionsPaul Jakma
2006-08-06 Paul Jakma <paul.jakma@sun.com> * interface.h: (ifstat_update_proc) declaration should match ifstat_update_sysctl really, which is to not return status, as such status is not used anywhere. * if_{proc,sysctl}.c: Make ifstat_update_* definitions and return values consistent with each other and their declarations, ie: (void) (*) (void).
2006-08-04[zebra] IRDP: Move stream_free to where its created, probably fixing a leakPaul Jakma
2006-08-01 Paul Jakma <paul.jakma@sun.com> * irdp_main.c: (irdp_advertisement) free the stream here, when done, right under where it was allocated so it's blindingly obvious it's correct. This possibly fixes a very slow leak of streams in zebra. * irdp_packet.c: (send_packet) don't free the stream here as it's hard to tell if right, plus an error case seemed to returning before free anyway.
2006-08-04[zebra] add more stuff to misc_null to avoid compile breakagesPaul Jakma
2006-08-04 Paul Jakma <paul.jakma@sun.com> * misc_null.c: Add ifstat_update_sysctl, add another required header.
2006-08-02[testzebra] Patch to misc_null.c to get older gcc to recognize #pragma tricksAndrew J. Schorr
2006-08-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * misc_null.c: Must include header files to get older versions of gcc to process the #pragma statements properly.
2006-07-27[zebra] Bug #268, Fix race between add/delete of routes, sanitise rib queueingPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * rib.h: (struct rib) Add a route_node rn_status flag field, this has to be copied every time head RIB of a route_node changes. Remove the rib lock field, not needed - see below. Add a status field for RIB-private flags. * zebra_rib.c: Add a global for the workqueue hold time, useful for testing. (general) Fix for bug #268. Problem originally detailed by Simon Bryden in [quagga-dev 4001]. Essentially, add/delete of a RIB must happen /before/ the queue. Best-path selection (ie rib_process) and reaping of freed RIBs can then be done after queueing. Only the route_node is queued - no important RIB state (i.e. whether a RIB is to be deleted) is queued. (struct zebra_queue_node_t) Disappears, no longer need to track multiple things on the queue, only the route_node. (rib_{lock,unlock}) removed, RIBs no longer need to be refcounted, no longer queued. (rib_queue_qnode_del) Removed, deleted RIBs no longer deleted via the queue. (rib_queue_add_qnode) deleted (rib_queue_add) Only the route_node is queued for best-path selection, we can check whether it is already queued or not and avoid queueing same node twice - struct rib * argument is not needed. (rib_link/unlink) (un)link RIB from route_node. (rib_{add,del}node) Front-end to updates of a RIB. (rib_process) Reap any deleted RIBs via rib_unlink. Unset the route_node 'QUEUED' flag. (General) Remove calls to rib_queue_add where add/del node was called - not needed, update calls where not. Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
2006-07-27[zebra] Add 'debug zebra rib' commandsPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * debug.{c,h}: Add 'debug zebra rib' and 'debug zebra rib queue'.
2006-07-27[zebra] Add test rig code, for testing the zebra RIBPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * {ioctl,kernel}_null.c: Dummy/Null kernel method implementations, useful for testing zebra code that calls such methods. * {redistribute,misc}_null.c: Dummy/Null methods, as above. But for zclient, and for various misc functions. * test_main.c: Test harness for zebra, currently just to test the RIB. * Makefile.am: Build testzebra using above. * zebra_rib.c: Add a global for the workqueue hold time, useful for testing.
2006-07-27[zebra] Connected routes must always be added to main tablePaul Jakma
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg> * connected.c: (connected_up_ipv4) interface connected routes always go to table main (or otherwise they cannot be used by linux as nexthops) * zserv.c: (zread_ipv4_add) send route to the correct routing table * zebra_rib.c (static_install_ipv4) set routing table
2006-07-02[zebra] Fix CID #104, check addr for null, and #18, check nexthop type argsPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not proceed if addr is NULL. * zebra_rib.c: (static_add_ipv6) Fix CID #18, double check required arguments are supplied for the given nexthop type.
2006-06-15[zebra] Fix forgetfulness wrt configured address on FreeBSDPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * (general) The key fixes are actually Andrew Schorr's. * interface.c: (ip_address_uninstall) Unset the configured flag. * connected.c: (connected_same) new helper, check whether two connected are same. (connected_implicit_withdraw) new helper, consolidation of existing code in connected_add_ipv{4,6}. Try filter out unneeded Zserv address delete/adds when address is exact same. Where old address is implicitely removed, be sure to preserve the IFC_CONFIGURED flag if set, fixes bug where configured addresses were being lost on FreeBSD.
2006-06-15[zebra] remove internal if_flag_dump, use libzebras version.Paul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * lib/if.c: (if_flag_dump) remove the whitespace indentation, callers should provide. * zebra/interface.c: (if_flag_dump_vty) redundant code, remove. (if_dump_vty) use libzebra if_flag_dump.
2006-05-21[interface configuration] Try to avoid losing address info after shutdown.Andrew J. Schorr
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Document the meaning of the ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags. * connected.c: (connected_withdraw) Do not delete the connected address if the ZEBRA_IFC_CONFIGURED flag is set. (connected_add_ipv4,connected_add_ipv6) Before calling connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag on the superseded connected structure.
2006-05-19[interface configuration] Preserve flag indicating address was set by quagga.Andrew J. Schorr
2006-05-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * connected.c: (connected_add_ipv4,connected_add_ipv6) If the new struct connected matches an already existing one (that will consequently be removed by connected_withdraw), then be sure to preserve the ZEBRA_IFC_CONFIGURED flag.
2006-05-17[debug] Improve zebra kernel socket debug message to include IP addresses.Andrew J. Schorr
2006-05-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * kernel_socket.c: (ifam_read_mesg) Improve debug message to show the IP address.
2006-05-15[zebra] Remove private command string tablePaul Jakma
2006-05-15 Paul Jakma <paul.jakma@sun.com> * zserv.c: (general) Remove the private zebra_command_str in favour of newly added libzebra zserv_command_string.
2006-05-11[zebra] CID #31, guard against potential NULL return of route_node_lookupPaul Jakma
2006-05-11 Paul Jakma <paul.jakma@sun.com> * interface.c: (if_delete_update) route_node_lookup may return NULL, should fix Coverity CID #31.
2006-03-30[zebra] arrange structs in padding-efficient manner and remove unused fieldPaul Jakma
2006-02-09 Paul Jakma <paul.jakma@sun.com> * rib.h: (struct {rib,nexthop}) Rearrange fields to avoid needless padding. (struct rib) Remove the indirect pointer, not used anywhere!
2006-02-02[zebra] Display flags on their line in 'show interface'.paul
2006-02-02 Paul Jakma <paul.jakma@sun.com> * interface.c: (if_dump_vty) move flags to their line, neater.
2006-01-30[zebra] Fix pauls zebra_rib/rib_process commit mistakes, again.paul
2006-01-30 Paul Jakma <paul.jakma@sun.com> * zebra_rib.c: (rib_process) Fourth time lucky on this jinxed commit, last commit had a hole that could allow connected route selection to escape beyond the connected route logic. This time I cross-checked with Gunnar first. ;)
2006-01-25[zebra] Fix incorrect changes made in RIB metric selection patchpaul
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no> * zebra_rib.c: (rib_process) Application of Gunnar's earlier metric selection RIB change included incorrect tidy-ups made by commiter. Fix. (NB: any errors here are again due to paul).
2006-01-25[zebra/solaris] Interface state fixups for Solaris.paul
2006-01-25 Paul Jakma <paul.jakma@sun.com> * (general) More solaris PF_ROUTE hacks. The IFF_UP mangling for solaris was incomplete on the PF_ROUTE side. fix it. This changeset generally uglifies things. For some future work I'd like to see the state changes seperated out from the details of the code. Differences between systems might then be slightly easier to implement without convoluted hacks. Changes should be specific to Solaris mostly, however also tested on FreeBSD 6. * if_ioctl_solaris.c: (interface_list_ioctl) ignore ~IFF_UP interfaces, we'll hear about them when/if interface goes up through NEWADDR. Update flags explicitely at end of it to kick mangling. * ioctl_solaris.c: (if_mangle_up) removed to interface.c, in kind. (lifreq_set_name) more convenient to take the string, than the ifp. (if_get_flags_direct) new convenience function, returns the actual flags. Used during bootstrap in if_ioctl_solaris.c to peek at flags of logical interfaces to see whether or not to ignore them. (if_get_flags) ENXIO means it's gone, poke out IFF_UP and kick flags update. (if_{un,}set_flags) flags argument should be 64bit. * ioctl.{c,h}: flags argument should be 64bit. * interface.h: Add a 'primary_state' flag to struct zebra_if on SUNOS_5. Export if_flags_update. * interface.c: (if_flags_mangle) moved over in kind from ioctl_solaris.c. Nasty kludge to try get IFF_UP right, as much as is possible. Also keep track of the actual IFF_UP value for the primary interface, so we can know when the ifp must be deleted. (if_flags_update) Take a new interface flags value, apply it to the interface, and take whatever actions are required due to flag transitions. (if_refresh) flag state change logic is moved out to previous. Just call if_get_flags, which will end up using previous to effect the update of flags. (if_flag_dump_vty) IFF_IPV{4,6} aren't interesting, VIRTUAL and NOXMIT are though. * kernel_socket.c: (ifm_read) Down->Down transitions shouldn't create ifp, for non-IFANNOUNCE systems. Use if_flags_update to update flags. flag transition logic is now handled automatically through if_flags_update. (ifam_read) Better to call if_refresh *after* adding connected addresses, as connected count affects IFF_UP on IFF_UP-mangled systems. On Solaris, Up->Down due to DELADDR means we need to delete the ifp - the IFINFO might already have been and gone. * rt.h: include other dependent headers.
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2006-01-182006-01-18 Gunnar Stigen <gunnar.stigen@axxessit.no>paul
* zebra_rib.c: Take interface metric into account.
2006-01-17[zebra] Record NEWADDR metric on PF_ROUTE, print CACHEINFO debug on netlinkpaul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * kernel_socket.c: (ifam_read) Read metric from RTM_NEWADDR. If interface is an alias, pass the alias as a label for connected_add_ipv{4,6}. * rt_netlink.c: (netlink_interface_addr) print out IFA_CACHEINFO info, if present, when debugging kernel messages.
2006-01-17[zebra] Defensive if_getaddrs bug fix.paul
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no> * if_ioctl.c: (if_getaddrs) Be defensive about assuming that struct ifaddrs will have ifa_addr filled in.
2006-01-17[zebra] Include metric on connected routes.paul
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no> * connected.c: (connected_up_ipv{4,6}) Include interface metric on connected routes.
2006-01-16[zserv] Extend Zserv header with version information and marker fieldpaul
2006-01-16 Paul Jakma <paul.jakma@sun.com> * lib/zclient.h: Update the Zserv protocol header with a version field. Define the old command field to be a 'marker', to allow old Zserv and updated Zserv to be differentiated. Future updates will bump the version field obviously. New command field is made wider. Try to stop using the 'zebra_size_t' typedef in the callbacks. * lib/zclient.c: Update to read/write new format header. * zebra/zserv.c: Ditto
2006-01-11[zserv] Update interface flags to 8 bytes wide.paul
2006-01-11 Paul Jakma <paul.jakma@sun.com> * if.h: (struct interface) expand flags to 8 bytes. * zclient.c: (zebra_interface_{add,state}_read) stream read of interface flags now need to use stream_getq. (zebra_interface_if_set_value) ditto 2006-01-11 Paul Jakma <paul.jakma@sun.com> * zserv.c: (zsend_interface_{add,delete,update}) if flags are 8 bytes now, update to write out with stream_putq.
2005-12-29remove dead code (from David Young)gdt
2005-12-292005-12-29 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* rt_socket.c (kernel_rtm_ipv4): Use AF_INET rather than AF_UNSPEC for mask. From David Young.
2005-11-26[zebra] fix connected_add_ipv6 declarations, label should be const.paul
2005-11-26 Paul Jakma <paul.jakma@sun.com> * connected.{c,h}: (connected_add_ipv6) label should have const qualifier, fix declarations.
2005-11-24[zebra] Fix mistake in previous commit and further compile warnings/errors.paul
2005-11-24 Paul Jakma <paul.jakma@sun.com> * kernel_socket.h: New header for functions exported to sysctl methods. * kernel_socket.c: include previous. Remove static qualifier from couple of functions which are used by sysctl methods, incorrectly added in previous commit. Add a workaround for a bogus gcc warning to the RTA_ macros. * Makefile.am: Add kernel_socket.h to noinst_HEADERS * if_sysctl.c: include rt.h and kernel_socket.h and remove redundant prototypes. * rtread_sysctl.c: ditto. (route_read) fix mismatch of return values. * {rt,zserv,rib}.h: Include lib headers depended on.
2005-11-23[zebra] fix some small compile errors, mark several functions staticpaul
2005-11-23 Paul Jakma <paul.jakma@sun.com> * (general) fix some small compile errors, and mark several functions as static. * kernel_socket.c: (ifan_read) should be static. fix missing brackets. (ifm_read,ifam_read,rtm_read_mesg,kernel_read) Make static (ifam_read_mesg) make static. fix incorrect variable name. (rtm_read) make static. Fix call to rib_delete_ipv4 which should be rib_delete_ipv6. (routing_socket,kernel_init) should be static. Void argument should be specified as such, not left incomplete. * rt_netlink.c: rt.h should be included, contains prototypes of exported functions. (kernel_delete_ipv6_old) fix sign of index argument. * rt_socket.c: Exact same as previous. Also, make various functions static. * rtread_getmsg.c: Include zserv.h, which prototypes route_read. Make static. * rtread_sysctl.c: zserv.h and rt.h should be included. fix definition of route_read.
2005-11-142005-11-14 Paul Jakma <paul.jakma@sun.com>paul
* zebra_rib.c: (rib_process) convert to new workqueue specs and shut up gcc, which complains about cast from void via function parameters, for some dumb reason. Do the cast inside the function instead. (rib_queue_qnode_del) ditto. (rib_queue_init) no need for the casts anymore.