| Age | Commit message (Collapse) | Author |
|---|
|
2007-05-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* zebra_routemap.c: (route_set_src_compile) Use '#ifdef HAVE_IPV6'
as needed.
* zebra_vty.c: (vty_show_ip_route_detail, vty_show_ip_route) Use
'#ifdef HAVE_IPV6' as needed.
(show_ip_protocol) Move function definition outside of
'#ifdef HAVE_IPV6' section.
|
|
2007-05-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* kernel_socket.c: (ifam_read_mesg) Grab RTA_DST and RTA_GATEWAY
addresses from the message (if present, which seems unlikely on
current BSD platforms), and show them in the debug messages.
Also, add ifam_flags to the debug messages.
(ifam_read) If the interface is point-to-point, then the RTA_BRD
address should be treated as a peer address.
|
|
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
|
|
2007-04-29 Paul Jakma <paul.jakma@sun.com>
* if_ioctl_solaris.c: (if_get_index) Fix bogus argument passed
to lifreq_set_name().
|
|
2007-04-29 Paul Jakma <paul.jakma@sun.com>
* ioctl{_solaris,}.c: (if_get_mtu) Fix missing ; in last commit.
|
|
2007-04-10 Paul Jakma <paul.jakma@sun.com>
* ioctl{_solaris,}.c: (if_get_mtu) Ping clients via
zebra_interface_up_update if MTU is changed.
|
|
2007-04-08 Paul Jakma <paul.jakma@sun.com>
* interface.c: (if_delete_update) Address removal triggered
by kernel shouldn't remove configured IPv4 address from connected
list.
|
|
2007-04-08 Paul Jakma <paul.jakma@sun.com>
* {ioctl,kernel}_null.c: Install of IP address should
reflect back to zebra via kernel_address_add..., makes
testzebra more useful.
|
|
2007-04-07 Paul Jakma <paul.jakma@sun.com>
* lib/prefix.h: Add define to match IPv4 Link-Local addresses
* zebra/redistribute.c: (zebra_check_addr) Don't redistribute routes
to IPv4 link-local prefixes, fixes bug #351.
* zebra/redistribute.h: Export zebra_check_addr.
* zebra/router-id.c: (router_id_bad_address) re-use zebra_check_addr
rather than implementing similar logic.
|
|
2007-03-06 Paul Jakma <paul.jakma@sun.com>
* kernel_socket.c: (ifam_read) Do not update interface metric on
receipt of NEW/DEL ADDR messages, bogus as: a) some systems
dont include iface metric for address events b) we didn't
update clients either. Initial diagnosis by Eugene Grosbein.
|
|
2007-02-26 Robert Olsson <Robert.Olsson@data.slu.se>
* irdp_main.c: (irdp_send_thread) Skip non-AF_INET addresses,
i.e. do not try interpret IPv6 addresses as IPv4 addresses
to broadcast in IRDP announcements..
|
|
2006-12-13 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if_ioctl_solaris.c: (if_get_addr) For IPv6, stop assuming
that all IFF_POINTOPOINT have prefixlen of IPV6_MAX_BITLEN.
Instead, always try the SIOCGLIFSUBNET ioctl; if that fails,
then we fall back to IPV6_MAX_BITLEN for PtP interfaces.
|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-12-08 Piotr Chytla <pch@packetconsulting.pl>
* zebra_rib.c: (static_install_ipv{4,6}) Case where existing
RIB is updated must explicitely rib_addqueue the route_node,
to ensure the update actually takes effect.
|
|
* kernel_socket.c (rtm_type_str): ifdef RTM_OLD{ADD,DEL} to
compile on systems that no longer define them.
|
|
2006-08-06 Paul Jakma <paul.jakma@sun.com>
* rtadv.h: depends on interface.h, so should include it.
|
|
2006-08-06 Paul Jakma <paul.jakma@sun.com>
* interface.h: (ifstat_update_proc) declaration should match
ifstat_update_sysctl really, which is to not return status, as
such status is not used anywhere.
* if_{proc,sysctl}.c: Make ifstat_update_* definitions and return values
consistent with each other and their declarations, ie:
(void) (*) (void).
|
|
2006-08-01 Paul Jakma <paul.jakma@sun.com>
* irdp_main.c: (irdp_advertisement) free the stream here, when done,
right under where it was allocated so it's blindingly obvious
it's correct. This possibly fixes a very slow leak of streams in
zebra.
* irdp_packet.c: (send_packet) don't free the stream here as
it's hard to tell if right, plus an error case seemed to
returning before free anyway.
|
|
2006-08-04 Paul Jakma <paul.jakma@sun.com>
* misc_null.c: Add ifstat_update_sysctl, add another required
header.
|
|
2006-08-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* misc_null.c: Must include header files to get older versions of gcc
to process the #pragma statements properly.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct rib) Add a route_node rn_status flag field,
this has to be copied every time head RIB of a route_node
changes.
Remove the rib lock field, not needed - see below.
Add a status field for RIB-private flags.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
(general) Fix for bug #268. Problem originally
detailed by Simon Bryden in [quagga-dev 4001].
Essentially, add/delete of a RIB must happen /before/ the
queue. Best-path selection (ie rib_process) and reaping of
freed RIBs can then be done after queueing. Only the route_node
is queued - no important RIB state (i.e. whether a RIB is to be
deleted) is queued.
(struct zebra_queue_node_t) Disappears, no longer need to
track multiple things on the queue, only the route_node.
(rib_{lock,unlock}) removed, RIBs no longer need to be
refcounted, no longer queued.
(rib_queue_qnode_del) Removed, deleted RIBs no longer deleted
via the queue.
(rib_queue_add_qnode) deleted
(rib_queue_add) Only the route_node is queued for best-path
selection, we can check whether it is already queued or
not and avoid queueing same node twice - struct rib * argument
is not needed.
(rib_link/unlink) (un)link RIB from route_node.
(rib_{add,del}node) Front-end to updates of a RIB.
(rib_process) Reap any deleted RIBs via rib_unlink.
Unset the route_node 'QUEUED' flag.
(General) Remove calls to rib_queue_add where add/del node was
called - not needed, update calls where not.
Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* debug.{c,h}: Add 'debug zebra rib' and 'debug zebra rib queue'.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* {ioctl,kernel}_null.c: Dummy/Null kernel method implementations,
useful for testing zebra code that calls such methods.
* {redistribute,misc}_null.c: Dummy/Null methods, as above. But
for zclient, and for various misc functions.
* test_main.c: Test harness for zebra, currently just to test the
RIB.
* Makefile.am: Build testzebra using above.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
|
|
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg>
* connected.c: (connected_up_ipv4) interface connected routes always
go to table main (or otherwise they cannot be used by linux as
nexthops)
* zserv.c: (zread_ipv4_add) send route to the correct routing table
* zebra_rib.c (static_install_ipv4) set routing table
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not
proceed if addr is NULL.
* zebra_rib.c: (static_add_ipv6) Fix CID #18, double check
required arguments are supplied for the given nexthop type.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* (general) The key fixes are actually Andrew Schorr's.
* interface.c: (ip_address_uninstall) Unset the configured flag.
* connected.c: (connected_same) new helper, check whether
two connected are same.
(connected_implicit_withdraw) new helper, consolidation of
existing code in connected_add_ipv{4,6}.
Try filter out unneeded Zserv address delete/adds when
address is exact same.
Where old address is implicitely removed, be sure to preserve
the IFC_CONFIGURED flag if set, fixes bug where configured
addresses were being lost on FreeBSD.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* lib/if.c: (if_flag_dump) remove the whitespace indentation, callers
should provide.
* zebra/interface.c: (if_flag_dump_vty) redundant code, remove.
(if_dump_vty) use libzebra if_flag_dump.
|
|
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Document the meaning of the
ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags.
* connected.c: (connected_withdraw) Do not delete the connected
address if the ZEBRA_IFC_CONFIGURED flag is set.
(connected_add_ipv4,connected_add_ipv6) Before calling
connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag
on the superseded connected structure.
|
|
2006-05-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* connected.c: (connected_add_ipv4,connected_add_ipv6) If the
new struct connected matches an already existing one
(that will consequently be removed by connected_withdraw),
then be sure to preserve the ZEBRA_IFC_CONFIGURED flag.
|
|
2006-05-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* kernel_socket.c: (ifam_read_mesg) Improve debug message
to show the IP address.
|
|
2006-05-15 Paul Jakma <paul.jakma@sun.com>
* zserv.c: (general) Remove the private zebra_command_str
in favour of newly added libzebra zserv_command_string.
|
|
2006-05-11 Paul Jakma <paul.jakma@sun.com>
* interface.c: (if_delete_update) route_node_lookup may return
NULL, should fix Coverity CID #31.
|
|
2006-02-09 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct {rib,nexthop}) Rearrange fields to avoid
needless padding.
(struct rib) Remove the indirect pointer, not used anywhere!
|
|
2006-02-02 Paul Jakma <paul.jakma@sun.com>
* interface.c: (if_dump_vty) move flags to their line, neater.
|
|
2006-01-30 Paul Jakma <paul.jakma@sun.com>
* zebra_rib.c: (rib_process) Fourth time lucky on this jinxed
commit, last commit had a hole that could allow connected
route selection to escape beyond the connected route logic.
This time I cross-checked with Gunnar first. ;)
|
|
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no>
* zebra_rib.c: (rib_process) Application of Gunnar's earlier
metric selection RIB change included incorrect tidy-ups made
by commiter. Fix. (NB: any errors here are again due to paul).
|
|
2006-01-25 Paul Jakma <paul.jakma@sun.com>
* (general) More solaris PF_ROUTE hacks. The IFF_UP mangling
for solaris was incomplete on the PF_ROUTE side. fix it.
This changeset generally uglifies things. For some future
work I'd like to see the state changes seperated out from
the details of the code. Differences between systems might
then be slightly easier to implement without convoluted
hacks.
Changes should be specific to Solaris mostly, however
also tested on FreeBSD 6.
* if_ioctl_solaris.c: (interface_list_ioctl) ignore ~IFF_UP
interfaces, we'll hear about them when/if interface goes up
through NEWADDR.
Update flags explicitely at end of it to kick mangling.
* ioctl_solaris.c: (if_mangle_up) removed to interface.c, in
kind.
(lifreq_set_name) more convenient to take the string, than
the ifp.
(if_get_flags_direct) new convenience function, returns
the actual flags. Used during bootstrap in if_ioctl_solaris.c
to peek at flags of logical interfaces to see whether or
not to ignore them.
(if_get_flags) ENXIO means it's gone, poke out IFF_UP and
kick flags update.
(if_{un,}set_flags) flags argument should be 64bit.
* ioctl.{c,h}: flags argument should be 64bit.
* interface.h: Add a 'primary_state' flag to struct zebra_if on
SUNOS_5.
Export if_flags_update.
* interface.c: (if_flags_mangle) moved over in kind from
ioctl_solaris.c. Nasty kludge to try get IFF_UP right, as
much as is possible. Also keep track of the actual IFF_UP
value for the primary interface, so we can know when the ifp
must be deleted.
(if_flags_update) Take a new interface flags value, apply it
to the interface, and take whatever actions are required due
to flag transitions.
(if_refresh) flag state change logic is moved out to
previous. Just call if_get_flags, which will end up using
previous to effect the update of flags.
(if_flag_dump_vty) IFF_IPV{4,6} aren't interesting, VIRTUAL
and NOXMIT are though.
* kernel_socket.c: (ifm_read) Down->Down transitions shouldn't
create ifp, for non-IFANNOUNCE systems.
Use if_flags_update to update flags.
flag transition logic is now handled automatically through
if_flags_update.
(ifam_read) Better to call if_refresh *after* adding
connected addresses, as connected count affects IFF_UP on
IFF_UP-mangled systems.
On Solaris, Up->Down due to DELADDR means we need to delete
the ifp - the IFINFO might already have been and gone.
* rt.h: include other dependent headers.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
* zebra_rib.c: Take interface metric into account.
|
|
2006-01-17 Paul Jakma <paul.jakma@sun.com>
* kernel_socket.c: (ifam_read) Read metric from RTM_NEWADDR.
If interface is an alias, pass the alias as a label for
connected_add_ipv{4,6}.
* rt_netlink.c: (netlink_interface_addr) print out
IFA_CACHEINFO info, if present, when debugging kernel
messages.
|
|
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no>
* if_ioctl.c: (if_getaddrs) Be defensive about assuming
that struct ifaddrs will have ifa_addr filled in.
|
|
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no>
* connected.c: (connected_up_ipv{4,6}) Include interface metric on
connected routes.
|
|
2006-01-16 Paul Jakma <paul.jakma@sun.com>
* lib/zclient.h: Update the Zserv protocol header with a version
field. Define the old command field to be a 'marker', to
allow old Zserv and updated Zserv to be differentiated.
Future updates will bump the version field obviously. New
command field is made wider. Try to stop using the
'zebra_size_t' typedef in the callbacks.
* lib/zclient.c: Update to read/write new format header.
* zebra/zserv.c: Ditto
|
|
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* if.h: (struct interface) expand flags to 8 bytes.
* zclient.c: (zebra_interface_{add,state}_read) stream read of
interface flags now need to use stream_getq.
(zebra_interface_if_set_value) ditto
2006-01-11 Paul Jakma <paul.jakma@sun.com>
* zserv.c: (zsend_interface_{add,delete,update}) if flags are
8 bytes now, update to write out with stream_putq.
|
|
|
|
* rt_socket.c (kernel_rtm_ipv4): Use AF_INET rather than AF_UNSPEC
for mask. From David Young.
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* connected.{c,h}: (connected_add_ipv6) label should have
const qualifier, fix declarations.
|
|
2005-11-24 Paul Jakma <paul.jakma@sun.com>
* kernel_socket.h: New header for functions exported to sysctl
methods.
* kernel_socket.c: include previous.
Remove static qualifier from couple of functions which are
used by sysctl methods, incorrectly added in previous commit.
Add a workaround for a bogus gcc warning to the RTA_ macros.
* Makefile.am: Add kernel_socket.h to noinst_HEADERS
* if_sysctl.c: include rt.h and kernel_socket.h and remove
redundant prototypes.
* rtread_sysctl.c: ditto.
(route_read) fix mismatch of return values.
* {rt,zserv,rib}.h: Include lib headers depended on.
|
|
2005-11-23 Paul Jakma <paul.jakma@sun.com>
* (general) fix some small compile errors, and mark several
functions as static.
* kernel_socket.c: (ifan_read) should be static.
fix missing brackets.
(ifm_read,ifam_read,rtm_read_mesg,kernel_read) Make static
(ifam_read_mesg) make static. fix incorrect variable name.
(rtm_read) make static. Fix call to rib_delete_ipv4 which
should be rib_delete_ipv6.
(routing_socket,kernel_init) should be static. Void argument
should be specified as such, not left incomplete.
* rt_netlink.c: rt.h should be included, contains prototypes of
exported functions.
(kernel_delete_ipv6_old) fix sign of index argument.
* rt_socket.c: Exact same as previous. Also, make various
functions static.
* rtread_getmsg.c: Include zserv.h, which prototypes
route_read. Make static.
* rtread_sysctl.c: zserv.h and rt.h should be included.
fix definition of route_read.
|
|
* zebra_rib.c: (rib_process) convert to new workqueue specs and
shut up gcc, which complains about cast from void via
function parameters, for some dumb reason. Do the cast
inside the function instead.
(rib_queue_qnode_del) ditto.
(rib_queue_init) no need for the casts anymore.
|
