summaryrefslogtreecommitdiff
path: root/zebra/ChangeLog
AgeCommit message (Collapse)Author
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-12-032004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (sigint) Use zlog_notice for termination message. (main) Use zlog_notice for startup announcement. * isis_main.c: (sigint,sigterm) Use zlog_notice for termination message. (terminate) This function should be static, not global. (main) Use zlog_notice for startup announcement, and remove ifdef ZEBRA_VERSION. * version.h.in: Remove declaration for pid_output_lock, this function is now static, not global. * pid_output.c: (pid_output_lock) This function should be static, not global. And remove "old umask" error message, since it was really an unimportant debug message, not an error. (pid_output) Need to declare static function pid_output_lock. * ospf6_main.c: (sigint,sigterm) Use zlog_notice for termination message. (main) Remove commented-out call to pid_output_lock (which should never be called other than from inside pid_output). And use zlog_notice to print the startup message, which now includes the vty port. * ospf_main.c: (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * rip_main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice. * ripng_main.c: (sighup) Remove spurious terminating message. (sigint) Use zlog_notice for termination message. (main) Issue a startup announcement using zlog_notice. * main.c: (sigint) Use zlog_notice for termination message. (main) Add a startup announcement using zlog_notice.
2004-11-25Make group to run daemon as configurable. Fixes #2 from Bugzilla #64.hasso
2004-11-25Unbreak vtysh - don't add comments inside of DEFUN, it breaks extract.pl.hasso
2004-10-28Remove dead "ip tunnel" command.hasso
2004-10-222004-10-22 Paul Jakma <paul@dishone.st>paul
* ospfd/ospf_packet.c: setsockopt_pktinfo -> setsockopt_ifindex * zebra/irdp_main.c: ditto
2004-10-19OK. Here it is - PtP patch from Andrew J. Schorr. No problems with ospfd,hasso
ripd might need some more testing though.
2004-10-19Fix regression. It seems to me that this code still works only by accidenthasso
though. Needs serious cleanup.
2004-10-13* zserv.c: Remove useless warnings "forwarding is already on".hasso
2004-10-13Make initializing smux connection configurable - "smux peer OID" commandhasso
initializes connection, and "no smux peer" command terminates it. Fixes bugzilla #47 and #112.
2004-10-12Some compiler warnings fixes and fix for bugzilla #119.hasso
2004-10-12Unbreak "show ip route" command.hasso
2004-10-07Fix warnings. Didn't even look at files not compiled in Linux though.hasso
2004-10-052004-10-05 Paul Jakma <paul@dishone.st>paul
* irdp_packet.c: (parse_irdp_packet) style issues. Use sockopt_iphdrincl_swab_systoh. Try unbork the code. Checksum the ICMP data and actually compare it to received checksum. Check data length against claimed length in header. Always use ntoh.. when accessing addresses, even when the comparison happens to be endian-safe. (send_packet) minor style isues. Use sockopt_iphdrincl_swab_htosys. (irdp_iph_hton/ntoh) IP header to/from network/host order.
2004-10-03New way to handle secondary addresses from Gilad Arnold.hasso
2004-10-03Common router id.hasso
2004-09-26Compiler warnings fixes.hasso
2004-09-242004-09-24 Paul Jakma <paul@dishone.st>paul
* irdp_interface.c: (no_ip_irdp_address_preference_cmd) add missing listnode declaration.
2004-09-242004-09-24 Paul Jakma <paul@dishone.st>paul
* irdp_{interface,main}.c: lists typedef removal cleanup. update some list loops to LIST_LOOP. some miscellaneous style and indent fixups. (no_ip_irdp_address_preference_cmd) Fix delete of referenced node in loop. * irdp_packet.c: (irdp_recvmsg) Fix buggy assignment of integer to pointer. * if_ioctl{,_solaris}.c: lists typedef removal cleanup. update some list loops to LIST_LOOP.
2004-09-23Remove usage of evil list and listnode typedefs.hasso
2004-09-222004-09-22 Paul Jakma <paul.jakma@sun.com>paul
* zserv.c: (zsend_route_multipath) fix nasty bad memset of struct in_addr to sizeof(struct in6_addr), causing odd and hard to debug crash.
2004-08-31Commit my hack (yes, I still call it hack) - command line switch for zebrahasso
daemon to change netlink receive buffer size.
2004-08-262004-08-26 Miles Nordin <carton@Ivy.NET>gdt
* ipforward_sysctl.c (mib_ipv6): Use size_t for len, per sysctl(3), rather than int. (Needed on NetBSD/alpha to display forwarding status correctly.)
2004-08-232004-08-23 Paul Jakma <paul@dishone.st>paul
* zebra/zserv.c: (zebra_init) remove implicit ip forward enabling * NEWS: warn about forwarding change
2004-08-192004-08-19 Paul Jakma <paul@dishone.st>paul
* irdp_main.c: update to match sockopt renames. * irdp_packet.c: include sockopt.h and update to match sockopt renames.
2004-08-112004-08-11 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* rtadv.c (rtadv_send_packet): Allocate space for control messages more carefully; it was wrong on NetBSD/sparc where CMSG alignment is to 8 bytes instead of 4, and overwriting the address. Use the provided macros for determining lengths.
2004-07-232004-07-23 Sowmini Varadhan <Sowmini.Varadhan@Sun.COM>paul
* if_ioctl_solaris.c: HAVE_IPV6 ifdef fixups * zserv.c: ditto * ioctl_solaris.c: ditto. * interface.c: cast for LLADDR * interface.h: Add guards, include redistribute.h and remove extraneous definitions of zebra_interface_{up,down}_update * ioctl.h: Add AF_IOCTL define for non SOLARIS_IPV6 * redistribute.h: include dependent header, zserv.h * zserv.h: include dependent header, rib.h
2004-07-232004-07-23 Paul Jakma <paul@dishone.st>paul
* irdp_main.c: use setsockopt_pktinfo_ipv4 * irdp_packet.c: use SOPT_SIZE_CMSG_PKTINFO_IPV4 and getsockopt_pktinfo_ifindex()
2004-07-13004-07-13 David Wiggins <dwiggins@bbn.comgdt
* kernel_socket.c (rtm_flag_dump): terminate buffer with '\0', not '0'. This is arguably not a security problem, since strlcat is used to copy to the buffer -gdt.
2004-07-13Creating irdp socket requires more privileges.hasso
2004-07-121) extract.pl is braindead, but I will not touch it willingly.hasso
2) Following common style is always better anyway.
2004-06-30Add libtool support.gdt
libzebra and libospfapiclient are now built shared, and linked shared with the daemons. This reduces the memory needed when running multiple daemons; each daemon is at least 150k smaller. Static libraries are still built, and libtool should use them on platforms which don't have shared libaries. As with autoconf, the user of a distribution does not need libtool; one just needs that to build from CVS. libospf.a is still a non-shared library, and still installed, not because that makese sense, but because I don't understand why it is the way it is now. Note that the tree was tagged 'libtool-before' just before this commit.
2004-06-12OK, here it is - irdp support. But don't expect me to fix any bugs in it.hasso
2004-05-18Router advertisement cleanup. Removed compatibility command because it'shasso
very annoying to have both obsolete "prefix-advertisement" and "prefix" in completion. We will break configuration anyway with secondary cleanup, so just remember mention it in release notes.
2004-05-112004-05-11 Paul Jakma <paul@dishone.st>paul
* ioctl.h: Add if_ioctl_ipv6 prototype and AF_IOCTL for SOLARIS_IPV6 * kernel_socket.c: Fix SAROUNDUP, compiler doesnt like do..while RHS in assignments :) * redistribute.c: (zebra_interface_delete_update) only used if RTM_IFANNOUNCE and NETLINK is available.
2004-05-112004-05-11 Paul Jakma <paul@dishone.st>paul
* Makefile.am: support for IOCTL_METHOD, as per Sowmini's patch. * if_ioctl_solaris.c: Fixup some erroneous privilege changes and add privs.h header. * ioctl_solaris.c: ditto
2004-05-112004-05-11 Paul Jakma <paul@dishone.st>paul
* configure.ac: Add solaris support for the zebra/*_solaris method's, based on Sowmini's patches. * zebra/Makefile.am: support for IOCTL_METHOD, as per Sowmini's patch.
2004-05-092004-05-09 Paul Jakma <paul@dishone.st>paul
* if_ioctl_solaris.c: Add zprivs support. * ioctl_solaris.c: ditto. 2004-05-09 Sowmini Varadhan <sowmini.varadhan@sun.com> * if_ioctl_solaris.c: New file, Solaris interface ioctl methods. * ioctl_solaris.c: New file, Common solaris ioctl methods.
2004-05-092004-05-09 Sowmini Varadhan <sowmini.varadhan@sun.com>paul
* ipforward_solaris.c: fix typo of ND variable.
2004-05-092004-05-09 Paul Jakma <paul@dishone.st>paul
* ioctl.c: (if_get_mtu) set mtu6 to mtu * mtu_kvm.c: (if_kvm_get_mtu) set mtu6 to mtu * rt_netlink.c: (netlink_interface) set mtu6 to mtu (netlink_link_change) ditto 2004-05-09 Sowmini Varadhan <sowmini.varadhan@sun.com> * interface.c: (if_delete_update) only used with HAVE_NETLINK and RTM_IFANNOUNCE. (if_flag_dump_vty) Solaris IFF_IPV4 and IFF_IPV6 if flags (if_dump_vty) print mtu6 if not same as mtu
2004-05-092004-05-09 Paul Jakma <paul@dishone.st>paul
* zserv.c: (zsend_route_multipath) Set the nexthop_num field correctly. Add NEXTHOP_TYPE_IPV6_IFNAME for v6. Conditionally set ZAPI_MESSAGE_METRIC flag - only for adds. (zsend_ipv4_add) cruft, deleted. (zsend_ipv4_delete) ditto. (zsend_ipv6_add) ditto. (zsend_ipv6_delete) ditto. 2004-05-09 Sowmini Varadhan <sowmini.varadhan@sun.com> * zserv.c: (zsend_ipv{4,6}_{add,delete}_multipath) collapsed into single zsend_route_multipath function. (zsend_interface_{up,down}) collapsed into zsend_interface_update. (zsend_interface_address_{add,delete}) collapsed into zsend_interface_address. (zsend_interface_add) send mtu6. (zsend_interface_delete) ditto. (zebra_write) remove unused function. (various) Apply static qualifier. Add comments. * zserv.h: Definitions changed as per above. * redistribute.c: Changes as per zserv.c.
2004-04-06[quagga-dev 1002]. Also fix date of previous commit in Chanelog.hasso
2004-03-18Temorary secondary-label fix. Real fix from Gilad will follow after release.hasso
2004-02-11Added "ipv6 forwarding" command and fixed "no ipv6 forwarding" help.hasso
2004-01-082004-01-08 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* kernel_socket.c (kernel_read): Use sockaddr_storage in buffer for reading kernel messages to ensure enough space (necessary on Solaris due to sockaddr_dl being large). Thanks to Sowmini Varadhan for help with this change.
2004-01-06change perror to zlog_errgdt
2004-01-062004-01-05 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* kernel_socket.c (ifm_read): Major cleanup. Use Sowmini's code to find the sockaddr_dl in all cases, narrowing the Solaris ifdef to just the accomodation of broken kernels. Check sockaddr_dl carefully up front, and later assume any non-NULL sdl pointer is valid. Clean up types and variable declarations, and rename WRAPUP to SAROUNDUP to make the name fit the behavior.
2004-01-06increase buffer size for kernel readsgdt
2004-01-052004-01-05 Greg Troxel <gdt@ahi.ir.bbn.com>gdt
* kernel_socket.c (kernel_read): Look up interfaces by index first, so that state changes which do not include a sockaddr_dl now work. Add many sanity checks. In particular, do not assume that a sockaddr_dl follows a message without checking the ifm_addrs flags, and do not trust the length in a sockaddr_dl. Add/clarify many comments.
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-05 10:06:51 +0000