summaryrefslogtreecommitdiff
path: root/zebra/ChangeLog
AgeCommit message (Collapse)Author
2007-02-26[zebra] IRDP should ignore non-IPv4 addressesPaul Jakma
2007-02-26 Robert Olsson <Robert.Olsson@data.slu.se> * irdp_main.c: (irdp_send_thread) Skip non-AF_INET addresses, i.e. do not try interpret IPv6 addresses as IPv4 addresses to broadcast in IRDP announcements..
2006-12-13[zebra] For solaris IPv6 PtP interfaces, try to support prefixlen != 128Andrew J. Schorr
2006-12-13 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if_ioctl_solaris.c: (if_get_addr) For IPv6, stop assuming that all IFF_POINTOPOINT have prefixlen of IPV6_MAX_BITLEN. Instead, always try the SIOCGLIFSUBNET ioctl; if that fails, then we fall back to IPV6_MAX_BITLEN for PtP interfaces.
2006-12-12[PtP over ethernet] New peer flag allows much more addressing flexibilityAndrew J. Schorr
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating whether a peer address has been configured. Comment now shows the new interpretation of the destination addr: if ZEBRA_IFA_PEER is set, then it must contain the destination address, otherwise it may contain the broadcast address or be NULL. (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete macros that were specific to IPv4 and not fully general. (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag. (CONNECTED_PREFIX) New macro giving the prefix to insert into the RIB: if CONNECTED_PEER, then use the destination (peer) address, else use the address field. (CONNECTED_ID) New macro to come up with an identifying address for the struct connected. * if.c: (if_lookup_address, connected_lookup_address) Streamline logic with new CONNECTED_PREFIX macro. * prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros for better performance than the general prefix_copy function. * zclient.c: (zebra_interface_address_read) For non-null destination addresses, set prefixlen to equal the address prefixlen. This is needed to get the new CONNECTED_PREFIX macro to work properly. * connected.c: (connected_up_ipv4, connected_down_ipv4, connected_up_ipv6, connected_down_ipv6) Simplify logic using the new CONNECTED_PREFIX macro. (connected_add_ipv4) Set prefixlen in destination addresses (required by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead of testing for IFF_POINTOPOINT. Delete invalid warning message. Warn about cases where the ZEBRA_IFA_PEER is set but no destination address has been supplied (and turn off the flag). (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning. Set prefixlen in destination address so CONNECTED_PREFIX will work. * connected.h: (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. * interface.c: (connected_dump_vty) Use CONNECTED_PEER macro to decide whether the destination address is a peer or broadcast address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT). * if_ioctl.c: (if_getaddrs) Instead of setting a peer address only when the IFF_POINTOPOINT is set, we now accept a peer address whenever it is available and not the same as the local address. Otherwise (no peer address assigned), we check for a broadcast address (regardless of the IFF_BROADCAST flag). And must now pass a flags value of ZEBRA_IFA_PEER to connected_add_ipv4 when a peer address is assigned. The same new logic is used with the IPv6 code as well (and we pass the new flags argument to connected_add_ipv6). (if_get_addr) Do not bother to check IFF_POINTOPOINT: just issue the SIOCGIFDSTADDR ioctl and see if we get back a peer address not matching the local address (and set the ZEBRA_IFA_PEER in that case). If there's no peer address, try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set. * if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl without bothering to check the IFF_POINTOPOINT flag. And if no peer address was found, just try the SIOCGLIFBRDADDR ioctl without checking the IFF_BROADCAST flag. Call connected_add_ipv4 and connected_add_ipv6 with appropriate flags. * if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to connected_add_ipv6. * kernel_socket.c: (ifam_read) Must pass new flags argument to connected_add_ipv6. * rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2 to determine local and possible peer address (so there's no longer a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately. Pass new flags argument to connected_add_ipv6. (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast to determine whether the connected destination address is a broadcast address. * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) Simplify logic by using new CONNECTED_PREFIX macro. * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX macro. * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX macro, both options collapse into the same code. * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new CONNECTED_ID macro. (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX macro. * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro instead of testing the IFF_POINTOPOINT flag. * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro instead of testing with if_is_pointopoint. And add commented-out code to implement alternative (in my opinion) more elegant behavior that has no special-case treatment for PtP addresses. (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID macro to simplify logic. (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does not give a useful result if prefixlen is 32 (we require a peer address in such cases). * ripd.c: (rip_update_interface) Fix same bug as above.
2006-12-08[zebra] Changes of nexthops of static routes didnt take effectPaul Jakma
2006-12-08 Piotr Chytla <pch@packetconsulting.pl> * zebra_rib.c: (static_install_ipv{4,6}) Case where existing RIB is updated must explicitely rib_addqueue the route_node, to ensure the update actually takes effect.
2006-09-132006-09-13 Tom Everett <tom@khubla.com>Greg Troxel
* kernel_socket.c (rtm_type_str): ifdef RTM_OLD{ADD,DEL} to compile on systems that no longer define them.
2006-08-06[zebra] trivial: rtadv.h depends on interface.hPaul Jakma
2006-08-06 Paul Jakma <paul.jakma@sun.com> * rtadv.h: depends on interface.h, so should include it.
2006-08-06[zebra] fix inconsistencies in ifstat_update_* declarations and definitionsPaul Jakma
2006-08-06 Paul Jakma <paul.jakma@sun.com> * interface.h: (ifstat_update_proc) declaration should match ifstat_update_sysctl really, which is to not return status, as such status is not used anywhere. * if_{proc,sysctl}.c: Make ifstat_update_* definitions and return values consistent with each other and their declarations, ie: (void) (*) (void).
2006-08-04[zebra] IRDP: Move stream_free to where its created, probably fixing a leakPaul Jakma
2006-08-01 Paul Jakma <paul.jakma@sun.com> * irdp_main.c: (irdp_advertisement) free the stream here, when done, right under where it was allocated so it's blindingly obvious it's correct. This possibly fixes a very slow leak of streams in zebra. * irdp_packet.c: (send_packet) don't free the stream here as it's hard to tell if right, plus an error case seemed to returning before free anyway.
2006-08-04[zebra] add more stuff to misc_null to avoid compile breakagesPaul Jakma
2006-08-04 Paul Jakma <paul.jakma@sun.com> * misc_null.c: Add ifstat_update_sysctl, add another required header.
2006-08-02[testzebra] Patch to misc_null.c to get older gcc to recognize #pragma tricksAndrew J. Schorr
2006-08-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * misc_null.c: Must include header files to get older versions of gcc to process the #pragma statements properly.
2006-07-27[zebra] Bug #268, Fix race between add/delete of routes, sanitise rib queueingPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * rib.h: (struct rib) Add a route_node rn_status flag field, this has to be copied every time head RIB of a route_node changes. Remove the rib lock field, not needed - see below. Add a status field for RIB-private flags. * zebra_rib.c: Add a global for the workqueue hold time, useful for testing. (general) Fix for bug #268. Problem originally detailed by Simon Bryden in [quagga-dev 4001]. Essentially, add/delete of a RIB must happen /before/ the queue. Best-path selection (ie rib_process) and reaping of freed RIBs can then be done after queueing. Only the route_node is queued - no important RIB state (i.e. whether a RIB is to be deleted) is queued. (struct zebra_queue_node_t) Disappears, no longer need to track multiple things on the queue, only the route_node. (rib_{lock,unlock}) removed, RIBs no longer need to be refcounted, no longer queued. (rib_queue_qnode_del) Removed, deleted RIBs no longer deleted via the queue. (rib_queue_add_qnode) deleted (rib_queue_add) Only the route_node is queued for best-path selection, we can check whether it is already queued or not and avoid queueing same node twice - struct rib * argument is not needed. (rib_link/unlink) (un)link RIB from route_node. (rib_{add,del}node) Front-end to updates of a RIB. (rib_process) Reap any deleted RIBs via rib_unlink. Unset the route_node 'QUEUED' flag. (General) Remove calls to rib_queue_add where add/del node was called - not needed, update calls where not. Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
2006-07-27[zebra] Add 'debug zebra rib' commandsPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * debug.{c,h}: Add 'debug zebra rib' and 'debug zebra rib queue'.
2006-07-27[zebra] Add test rig code, for testing the zebra RIBPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * {ioctl,kernel}_null.c: Dummy/Null kernel method implementations, useful for testing zebra code that calls such methods. * {redistribute,misc}_null.c: Dummy/Null methods, as above. But for zclient, and for various misc functions. * test_main.c: Test harness for zebra, currently just to test the RIB. * Makefile.am: Build testzebra using above. * zebra_rib.c: Add a global for the workqueue hold time, useful for testing.
2006-07-27[zebra] Connected routes must always be added to main tablePaul Jakma
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg> * connected.c: (connected_up_ipv4) interface connected routes always go to table main (or otherwise they cannot be used by linux as nexthops) * zserv.c: (zread_ipv4_add) send route to the correct routing table * zebra_rib.c (static_install_ipv4) set routing table
2006-07-02[zebra] Fix CID #104, check addr for null, and #18, check nexthop type argsPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not proceed if addr is NULL. * zebra_rib.c: (static_add_ipv6) Fix CID #18, double check required arguments are supplied for the given nexthop type.
2006-06-15[zebra] Fix forgetfulness wrt configured address on FreeBSDPaul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * (general) The key fixes are actually Andrew Schorr's. * interface.c: (ip_address_uninstall) Unset the configured flag. * connected.c: (connected_same) new helper, check whether two connected are same. (connected_implicit_withdraw) new helper, consolidation of existing code in connected_add_ipv{4,6}. Try filter out unneeded Zserv address delete/adds when address is exact same. Where old address is implicitely removed, be sure to preserve the IFC_CONFIGURED flag if set, fixes bug where configured addresses were being lost on FreeBSD.
2006-06-15[zebra] remove internal if_flag_dump, use libzebras version.Paul Jakma
2006-06-15 Paul Jakma <paul.jakma@sun.com> * lib/if.c: (if_flag_dump) remove the whitespace indentation, callers should provide. * zebra/interface.c: (if_flag_dump_vty) redundant code, remove. (if_dump_vty) use libzebra if_flag_dump.
2006-05-21[interface configuration] Try to avoid losing address info after shutdown.Andrew J. Schorr
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Document the meaning of the ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags. * connected.c: (connected_withdraw) Do not delete the connected address if the ZEBRA_IFC_CONFIGURED flag is set. (connected_add_ipv4,connected_add_ipv6) Before calling connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag on the superseded connected structure.
2006-05-19[interface configuration] Preserve flag indicating address was set by quagga.Andrew J. Schorr
2006-05-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * connected.c: (connected_add_ipv4,connected_add_ipv6) If the new struct connected matches an already existing one (that will consequently be removed by connected_withdraw), then be sure to preserve the ZEBRA_IFC_CONFIGURED flag.
2006-05-17[debug] Improve zebra kernel socket debug message to include IP addresses.Andrew J. Schorr
2006-05-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * kernel_socket.c: (ifam_read_mesg) Improve debug message to show the IP address.
2006-05-15[zebra] Remove private command string tablePaul Jakma
2006-05-15 Paul Jakma <paul.jakma@sun.com> * zserv.c: (general) Remove the private zebra_command_str in favour of newly added libzebra zserv_command_string.
2006-05-11[zebra] CID #31, guard against potential NULL return of route_node_lookupPaul Jakma
2006-05-11 Paul Jakma <paul.jakma@sun.com> * interface.c: (if_delete_update) route_node_lookup may return NULL, should fix Coverity CID #31.
2006-03-30[zebra] arrange structs in padding-efficient manner and remove unused fieldPaul Jakma
2006-02-09 Paul Jakma <paul.jakma@sun.com> * rib.h: (struct {rib,nexthop}) Rearrange fields to avoid needless padding. (struct rib) Remove the indirect pointer, not used anywhere!
2006-02-02[zebra] Display flags on their line in 'show interface'.paul
2006-02-02 Paul Jakma <paul.jakma@sun.com> * interface.c: (if_dump_vty) move flags to their line, neater.
2006-01-30[zebra] Fix pauls zebra_rib/rib_process commit mistakes, again.paul
2006-01-30 Paul Jakma <paul.jakma@sun.com> * zebra_rib.c: (rib_process) Fourth time lucky on this jinxed commit, last commit had a hole that could allow connected route selection to escape beyond the connected route logic. This time I cross-checked with Gunnar first. ;)
2006-01-25[zebra] Fix incorrect changes made in RIB metric selection patchpaul
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no> * zebra_rib.c: (rib_process) Application of Gunnar's earlier metric selection RIB change included incorrect tidy-ups made by commiter. Fix. (NB: any errors here are again due to paul).
2006-01-25[zebra/solaris] Interface state fixups for Solaris.paul
2006-01-25 Paul Jakma <paul.jakma@sun.com> * (general) More solaris PF_ROUTE hacks. The IFF_UP mangling for solaris was incomplete on the PF_ROUTE side. fix it. This changeset generally uglifies things. For some future work I'd like to see the state changes seperated out from the details of the code. Differences between systems might then be slightly easier to implement without convoluted hacks. Changes should be specific to Solaris mostly, however also tested on FreeBSD 6. * if_ioctl_solaris.c: (interface_list_ioctl) ignore ~IFF_UP interfaces, we'll hear about them when/if interface goes up through NEWADDR. Update flags explicitely at end of it to kick mangling. * ioctl_solaris.c: (if_mangle_up) removed to interface.c, in kind. (lifreq_set_name) more convenient to take the string, than the ifp. (if_get_flags_direct) new convenience function, returns the actual flags. Used during bootstrap in if_ioctl_solaris.c to peek at flags of logical interfaces to see whether or not to ignore them. (if_get_flags) ENXIO means it's gone, poke out IFF_UP and kick flags update. (if_{un,}set_flags) flags argument should be 64bit. * ioctl.{c,h}: flags argument should be 64bit. * interface.h: Add a 'primary_state' flag to struct zebra_if on SUNOS_5. Export if_flags_update. * interface.c: (if_flags_mangle) moved over in kind from ioctl_solaris.c. Nasty kludge to try get IFF_UP right, as much as is possible. Also keep track of the actual IFF_UP value for the primary interface, so we can know when the ifp must be deleted. (if_flags_update) Take a new interface flags value, apply it to the interface, and take whatever actions are required due to flag transitions. (if_refresh) flag state change logic is moved out to previous. Just call if_get_flags, which will end up using previous to effect the update of flags. (if_flag_dump_vty) IFF_IPV{4,6} aren't interesting, VIRTUAL and NOXMIT are though. * kernel_socket.c: (ifm_read) Down->Down transitions shouldn't create ifp, for non-IFANNOUNCE systems. Use if_flags_update to update flags. flag transition logic is now handled automatically through if_flags_update. (ifam_read) Better to call if_refresh *after* adding connected addresses, as connected count affects IFF_UP on IFF_UP-mangled systems. On Solaris, Up->Down due to DELADDR means we need to delete the ifp - the IFINFO might already have been and gone. * rt.h: include other dependent headers.
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2006-01-182006-01-18 Gunnar Stigen <gunnar.stigen@axxessit.no>paul
* zebra_rib.c: Take interface metric into account.
2006-01-17[zebra] Record NEWADDR metric on PF_ROUTE, print CACHEINFO debug on netlinkpaul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * kernel_socket.c: (ifam_read) Read metric from RTM_NEWADDR. If interface is an alias, pass the alias as a label for connected_add_ipv{4,6}. * rt_netlink.c: (netlink_interface_addr) print out IFA_CACHEINFO info, if present, when debugging kernel messages.
2006-01-17[zebra] Defensive if_getaddrs bug fix.paul
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no> * if_ioctl.c: (if_getaddrs) Be defensive about assuming that struct ifaddrs will have ifa_addr filled in.
2006-01-17[zebra] Include metric on connected routes.paul
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no> * connected.c: (connected_up_ipv{4,6}) Include interface metric on connected routes.
2006-01-16[zserv] Extend Zserv header with version information and marker fieldpaul
2006-01-16 Paul Jakma <paul.jakma@sun.com> * lib/zclient.h: Update the Zserv protocol header with a version field. Define the old command field to be a 'marker', to allow old Zserv and updated Zserv to be differentiated. Future updates will bump the version field obviously. New command field is made wider. Try to stop using the 'zebra_size_t' typedef in the callbacks. * lib/zclient.c: Update to read/write new format header. * zebra/zserv.c: Ditto
2006-01-11[zserv] Update interface flags to 8 bytes wide.paul
2006-01-11 Paul Jakma <paul.jakma@sun.com> * if.h: (struct interface) expand flags to 8 bytes. * zclient.c: (zebra_interface_{add,state}_read) stream read of interface flags now need to use stream_getq. (zebra_interface_if_set_value) ditto 2006-01-11 Paul Jakma <paul.jakma@sun.com> * zserv.c: (zsend_interface_{add,delete,update}) if flags are 8 bytes now, update to write out with stream_putq.
2005-12-29remove dead code (from David Young)gdt
2005-12-292005-12-29 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* rt_socket.c (kernel_rtm_ipv4): Use AF_INET rather than AF_UNSPEC for mask. From David Young.
2005-11-26[zebra] fix connected_add_ipv6 declarations, label should be const.paul
2005-11-26 Paul Jakma <paul.jakma@sun.com> * connected.{c,h}: (connected_add_ipv6) label should have const qualifier, fix declarations.
2005-11-24[zebra] Fix mistake in previous commit and further compile warnings/errors.paul
2005-11-24 Paul Jakma <paul.jakma@sun.com> * kernel_socket.h: New header for functions exported to sysctl methods. * kernel_socket.c: include previous. Remove static qualifier from couple of functions which are used by sysctl methods, incorrectly added in previous commit. Add a workaround for a bogus gcc warning to the RTA_ macros. * Makefile.am: Add kernel_socket.h to noinst_HEADERS * if_sysctl.c: include rt.h and kernel_socket.h and remove redundant prototypes. * rtread_sysctl.c: ditto. (route_read) fix mismatch of return values. * {rt,zserv,rib}.h: Include lib headers depended on.
2005-11-23[zebra] fix some small compile errors, mark several functions staticpaul
2005-11-23 Paul Jakma <paul.jakma@sun.com> * (general) fix some small compile errors, and mark several functions as static. * kernel_socket.c: (ifan_read) should be static. fix missing brackets. (ifm_read,ifam_read,rtm_read_mesg,kernel_read) Make static (ifam_read_mesg) make static. fix incorrect variable name. (rtm_read) make static. Fix call to rib_delete_ipv4 which should be rib_delete_ipv6. (routing_socket,kernel_init) should be static. Void argument should be specified as such, not left incomplete. * rt_netlink.c: rt.h should be included, contains prototypes of exported functions. (kernel_delete_ipv6_old) fix sign of index argument. * rt_socket.c: Exact same as previous. Also, make various functions static. * rtread_getmsg.c: Include zserv.h, which prototypes route_read. Make static. * rtread_sysctl.c: zserv.h and rt.h should be included. fix definition of route_read.
2005-11-142005-11-14 Paul Jakma <paul.jakma@sun.com>paul
* zebra_rib.c: (rib_process) convert to new workqueue specs and shut up gcc, which complains about cast from void via function parameters, for some dumb reason. Do the cast inside the function instead. (rib_queue_qnode_del) ditto. (rib_queue_init) no need for the casts anymore.
2005-11-12[solaris] Extra debug and cross-checks for kernel_socket, two Sol9 fixes.paul
2005-11-12 Alexander Gall <gall@switch.ch> * See [quagga-dev 1815] * kernel_socket.c: (rtm_write) Use SAROUNDUP when HAVE_SIN_LEN is not available. * rt_socket.c: (kernel_rtm_ipv6(_multipath)) set family to AF_INET6 on ipv6 routes. 2005-11-12 Paul Jakma <paul.jakma@sun.com> * kernel_socket.c: Add RTA_NAME_GET macro to extract name from sockaddr_dl. Add some more RTF_ flags. * (ifan_read) Add some debug messages. * (ifm_read) Add more debug messages. More robust cross-checks of index against name. Fall back to by-name lookup if the index lookup fails, future proofing more than anything else. (ifam_read_mesg) Read RTA_IFP. Add debug messages. (ifam_read) More debug. If there's an RTA_IFP and it isn't the name of the interface, save it as the label. (rtm_read_mesg) Read RTA_IFP. (rtm_read) allow name to be retrieved. (rtmsg_debug) expand on the debug message.
2005-11-11[zebra] Fix warning and small connected-label changes merge error.paul
2005-11-11 Paul Jakma <paul.jakma@sun.com> * kernel_socket.c: (ifm_read) arithmetic on void pointer warning. (ifam_read) Fix error from connected-with-label merge, something crept in from the pending Solaris kernel_socket.c patch which shouldn't have.
2005-11-032005-11-03 Paul Jakma <paul.jakma@sun.com>paul
* connected.{c,h}: Include memory.h (connected_add_ipv4) Use MTYPE for ifc label. (connected_add_ipv6) Also should accept label. Store it in ifp. (connected_del_ipv4) Taking label as argument is pointless. * rt_netlink.c: (netlink_interface_addr) update label usage for connected_{add,delete} functions. * if_ioctl.c: (if_getaddrs) NULL label for connected_add_ipv6. * if_ioctl_solaris.c: (interface_list_ioctl) Pass LIFC_NOXMIT so we also find out about NOXMIT interfaces like VNI. Bit of hackery to turn interface names into the primary interface name, later with routing socket messages we only will about primary interfaces anyway, so we must normalise the name. (if_get_addr) take label as argument, so it can be passed to connected_add. If label is provided, then it is interface name to issue the ioctl for address information on, not the ifp name. (interface_list) List AF_UNSPEC too, just in case. * if_proc.c: (ifaddr_proc_ipv6) label for connected_add_ipv6. * interface.c: (if_addr_wakeup) Some very bogus code - sets IFF_RUNNING - add comment. (if_refresh) (ip_address_install) Use MTYPE for ifc label. * ioctl_solaris.c: (if_mangle_up) New function. Hackery to make IFF_UP reflect whether any addresses are left on the interface, as we get signalled for IFF_UP flags change on the primary interface only. Logical interfaces dont generate IFINFO, but we do get an RTM_DELADDR. (if_get_flags) Call if_mangle_up before return. * kernel_socket.c: (ifam_read) Fixup calls to connected_{add,delete} to match above changes. Rename gate variable to brd, less confusing. Pass the interface name as a label, if it is not same name as ifp->name.
2005-10-112005-10-11 Paul Jakma <paul.jakma@sun.com>paul
* connected.{c,h}: (connected_{add,delete}_ipv4) label should be const qualified.
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* rt_netlink.c: (netlink_request) Use memset to clear structure before calling sendto (eliminates a valgrind error message about uninitialized data).
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/filer.c: show protocol name in filter_show() * lib/plist.c: show protocol name in vty_show_prefix_entry() * routemap.c: show protocol name in vty_show_route_map_entry() * lib/vty.c: in vty_command(), show protocol name if command unknown * zebra/zserv.c: Always provide distance fo route add * ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance with RFC. Also PeerDomain is now set to a STRING type. * ripd/ripd.h: rip_redistribute_add() API includes metric and distance * ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance Now allows a RIP-route to overcome a redistributed route coming from a protocol with worse (higher) administrative distance Metrics from redistribution are shown in show ip rip * ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. provide distance and metric * ripd/rip_interface.c: adapt to the rip_redistribute_add() API * ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage rather a CMD_WARNING, because set metric ius shared with other protocols using larger values (such as OSPF) The match metric action takes first external metric if present (from redistribution) then RIP metric.
2005-09-28 * connected.c: flag connected_up_ipv6() and connected_down_ipv6()vincent
usage with HAVE_IPV6
2005-09-24 * rib.h: Add note about behaviour of rib_add_ipv[46]* functions -hasso
add is treated as implicit withdraw.
2005-09-21 * zebra_rib.c: Reduce the height of some staircases. Fixhasso
rib_delete_ipv6() to match routes in the RIB by their gateway as well as by destination.