| Age | Commit message (Collapse) | Author |
|---|
|
|
|
existing static routes to be revalidated)
|
|
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
|
|
already marked "real" (ZEBRA_IFC_REAL), i.e., "in kernel." According
to Paul Jakma, this probably fixes Quagga bug #202.
|
|
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating
whether a peer address has been configured. Comment now shows
the new interpretation of the destination addr: if ZEBRA_IFA_PEER
is set, then it must contain the destination address, otherwise
it may contain the broadcast address or be NULL.
(CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete
macros that were specific to IPv4 and not fully general.
(CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag.
(CONNECTED_PREFIX) New macro giving the prefix to insert into
the RIB: if CONNECTED_PEER, then use the destination (peer) address,
else use the address field.
(CONNECTED_ID) New macro to come up with an identifying address
for the struct connected.
* if.c: (if_lookup_address, connected_lookup_address) Streamline
logic with new CONNECTED_PREFIX macro.
* prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros
for better performance than the general prefix_copy function.
* zclient.c: (zebra_interface_address_read) For non-null destination
addresses, set prefixlen to equal the address prefixlen. This
is needed to get the new CONNECTED_PREFIX macro to work properly.
* connected.c: (connected_up_ipv4, connected_down_ipv4,
connected_up_ipv6, connected_down_ipv6) Simplify logic using the
new CONNECTED_PREFIX macro.
(connected_add_ipv4) Set prefixlen in destination addresses (required
by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead
of testing for IFF_POINTOPOINT. Delete invalid warning message.
Warn about cases where the ZEBRA_IFA_PEER is set but no
destination address has been supplied (and turn off the flag).
(connected_add_ipv6) Add new flags argument so callers may set
the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies
IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning.
Set prefixlen in destination address so CONNECTED_PREFIX will work.
* connected.h: (connected_add_ipv6) Add new flags argument so
callers may set the ZEBRA_IFA_PEER flag.
* interface.c: (connected_dump_vty) Use CONNECTED_PEER macro
to decide whether the destination address is a peer or broadcast
address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT).
* if_ioctl.c: (if_getaddrs) Instead of setting a peer address
only when the IFF_POINTOPOINT is set, we now accept a peer
address whenever it is available and not the same as the local
address. Otherwise (no peer address assigned), we check
for a broadcast address (regardless of the IFF_BROADCAST flag).
And must now pass a flags value of ZEBRA_IFA_PEER to
connected_add_ipv4 when a peer address is assigned.
The same new logic is used with the IPv6 code as well (and we
pass the new flags argument to connected_add_ipv6).
(if_get_addr) Do not bother to check IFF_POINTOPOINT: just
issue the SIOCGIFDSTADDR ioctl and see if we get back
a peer address not matching the local address (and set
the ZEBRA_IFA_PEER in that case). If there's no peer address,
try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set.
* if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl
without bothering to check the IFF_POINTOPOINT flag. And if
no peer address was found, just try the SIOCGLIFBRDADDR ioctl
without checking the IFF_BROADCAST flag. Call connected_add_ipv4
and connected_add_ipv6 with appropriate flags.
* if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to
connected_add_ipv6.
* kernel_socket.c: (ifam_read) Must pass new flags argument to
connected_add_ipv6.
* rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2
to determine local and possible peer address (so there's no longer
a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately.
Pass new flags argument to connected_add_ipv6.
(netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast
to determine whether the connected destination address is a
broadcast address.
* bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete)
Simplify logic by using new CONNECTED_PREFIX macro.
* ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix,
ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX
macro, both options collapse into the same code.
* ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new
CONNECTED_ID macro.
(ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX
macro.
* ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro
instead of testing the IFF_POINTOPOINT flag.
* ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro
instead of testing with if_is_pointopoint. And add commented-out
code to implement alternative (in my opinion) more elegant behavior
that has no special-case treatment for PtP addresses.
(ospf_network_run) Use new CONNECTED_ID macro to simplify logic.
* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
macro to simplify logic.
(rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
not give a useful result if prefixlen is 32 (we require a peer
address in such cases).
* ripd.c: (rip_update_interface) Fix same bug as above.
|
|
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg>
* connected.c: (connected_up_ipv4) interface connected routes always
go to table main (or otherwise they cannot be used by linux as
nexthops)
* zserv.c: (zread_ipv4_add) send route to the correct routing table
* zebra_rib.c (static_install_ipv4) set routing table
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* (general) The key fixes are actually Andrew Schorr's.
* interface.c: (ip_address_uninstall) Unset the configured flag.
* connected.c: (connected_same) new helper, check whether
two connected are same.
(connected_implicit_withdraw) new helper, consolidation of
existing code in connected_add_ipv{4,6}.
Try filter out unneeded Zserv address delete/adds when
address is exact same.
Where old address is implicitely removed, be sure to preserve
the IFC_CONFIGURED flag if set, fixes bug where configured
addresses were being lost on FreeBSD.
|
|
2006-05-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* if.h: (struct connected) Document the meaning of the
ZEBRA_IFC_REAL and ZEBRA_IFC_CONFIGURED flags.
* connected.c: (connected_withdraw) Do not delete the connected
address if the ZEBRA_IFC_CONFIGURED flag is set.
(connected_add_ipv4,connected_add_ipv6) Before calling
connected_withdraw, unset the ZEBRA_IFC_CONFIGURED flag
on the superseded connected structure.
|
|
2006-05-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* connected.c: (connected_add_ipv4,connected_add_ipv6) If the
new struct connected matches an already existing one
(that will consequently be removed by connected_withdraw),
then be sure to preserve the ZEBRA_IFC_CONFIGURED flag.
|
|
2006-01-17 Gunnar Stigen <gunnar.stigen@axxessit.no>
* connected.c: (connected_up_ipv{4,6}) Include interface metric on
connected routes.
|
|
2005-11-26 Paul Jakma <paul.jakma@sun.com>
* connected.{c,h}: (connected_add_ipv6) label should have
const qualifier, fix declarations.
|
|
* connected.{c,h}: Include memory.h
(connected_add_ipv4) Use MTYPE for ifc label.
(connected_add_ipv6) Also should accept label. Store it in ifp.
(connected_del_ipv4) Taking label as argument is pointless.
* rt_netlink.c: (netlink_interface_addr) update label usage
for connected_{add,delete} functions.
* if_ioctl.c: (if_getaddrs) NULL label for connected_add_ipv6.
* if_ioctl_solaris.c: (interface_list_ioctl) Pass LIFC_NOXMIT
so we also find out about NOXMIT interfaces like VNI.
Bit of hackery to turn interface names into the primary
interface name, later with routing socket messages we only
will about primary interfaces anyway, so we must normalise
the name.
(if_get_addr) take label as argument, so it can
be passed to connected_add.
If label is provided, then it is interface name to issue the
ioctl for address information on, not the ifp name.
(interface_list) List AF_UNSPEC too, just in case.
* if_proc.c: (ifaddr_proc_ipv6) label for connected_add_ipv6.
* interface.c: (if_addr_wakeup) Some very bogus code - sets
IFF_RUNNING - add comment.
(if_refresh)
(ip_address_install) Use MTYPE for ifc label.
* ioctl_solaris.c: (if_mangle_up) New function. Hackery to make
IFF_UP reflect whether any addresses are left on the
interface, as we get signalled for IFF_UP flags change on the
primary interface only. Logical interfaces dont generate
IFINFO, but we do get an RTM_DELADDR.
(if_get_flags) Call if_mangle_up before return.
* kernel_socket.c: (ifam_read) Fixup calls to
connected_{add,delete} to match above changes. Rename gate
variable to brd, less confusing.
Pass the interface name as a label, if it is not same name
as ifp->name.
|
|
* connected.{c,h}: (connected_{add,delete}_ipv4) label should
be const qualified.
|
|
usage with HAVE_IPV6
|
|
* (general) RTM_CHANGE and implicit withdraw on RTM_NEWADDR
support.
* connected.c: (connected_withdraw) new function. withdraw a
connected subnet address set from zebra, and pass information
along to clients.
(connected_announce) similar, but to announce a new connected
subnet address set.
(connected_check_ipv4) renamed to connected_check, as its
AFI independent.
(connected_add_ipv{4,6}) Remove the connected address announce
stuff, use connected_announce instead.
If connected_check indicates address is already present,
treat it as an implicit withdraw of the existing address, ie
remove the old address details and replace with the new
details.
(connected_delete_ipv{4,6}) Use connected_withdraw.
(connected_check_ipv6) deleted in favour of connected_check.
* connected.h: Rename connected_check_ipv4 to connected_check.
delete connected_check_ipv6.
* interface.c: Use connected_check rather than the AFI specific
symbols.
* kernel_socket.c: (rtm_read) RTM_CHANGE support. Create a
rib delete event for the existing route, before adding route
again.
(kernel_read) we can handle RTM_CHANGE now.
|
|
rib_add_ipv6() function so that IPv6 routes in RIB can have correct
metric. No IPv6 routing daemon uses distance yet though.
* zserv.c, connected.c, kernel_socket.c, rt_netlink.c,
rtread_proc.c,zserv.c: Pass metric and distance info to the
rib_add_ipv6().
Forwardport from stable branch.
|
|
* (global) Extern and static'ification, with related fixups
of declarations, ensuring files include their own headers, etc.
if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in
list loop
|
|
* (global): Fix up list loops to match changes in lib/linklist,
and some basic auditing of usage.
* configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES
* HACKING: Add notes about deprecating interfaces and commands.
* lib/linklist.h: Add usage comments.
Rename getdata macro to listgetdata.
Rename nextnode to listnextnode and fix its odd behaviour to be
less dangerous.
Make listgetdata macro assert node is not null, NULL list entries
should be bug condition.
ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use
with for loop, Suggested by Jim Carlson of Sun.
Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the
"safety" of previous macro.
LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to
distinguish from the similarly named functions, and reflect their
effect better.
Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section
with the old defines which were modified above,
for backwards compatibility - guarded to prevent Quagga using it..
* lib/linklist.c: fix up for linklist.h changes.
* ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single
scan of the area list, rather than scanning all areas first for
INTER_ROUTER and then again for INTER_NETWORK. According to
16.2, the scan should be area specific anyway, and further
ospf6d does not seem to implement 16.3 anyway.
|
|
* connected.c: (connected_add_ipv4) Limit warning about /32 addresses
with no peer specified to PtP interfaces only.
|
|
ripd might need some more testing though.
|
|
|
|
|
|
|
|
* zebra/connected.c: PtP revert fixup. Zebra was not creating
connected route for PtP peer.
|
|
* zebra/connected.c: revert the 'generic PtP' patch as it causes
far too many problems. People who use FreeSWAN should investigate
native linux ipsec.
* zebra/rt_netlink.c: ditto
* lib/if.c: ditto
* ripd/ripd.h: ditto
* ripd/ripd.c: ditto
* ripd/rip_interface.c: ditto
* ospfd/ospfd.c: ditto
* ospfd/ospf_snmp.c: ditto
* bgpd/bgp_nexthop.c: ditto
|
|
|
|
Log:
I've fixed a small bug in connected_down_ipv4():
I changed
if (ifc_pointopoint (ifc))
into
if (ifc_pointopoint (ifc) && dest)
like show in connected_up_ipv4()
After changing this 'ip address x/y'; 'no ip address x/y' works without
crash
when done in sequence.
|
|
[zebra 16681] OSPF NSSA Patches
|
|
|
|
|
