summaryrefslogtreecommitdiff
path: root/zebra/irdp_main.c
AgeCommit message (Collapse)Author
2006-08-04[zebra] IRDP: Move stream_free to where its created, probably fixing a leakPaul Jakma
2006-08-01 Paul Jakma <paul.jakma@sun.com> * irdp_main.c: (irdp_advertisement) free the stream here, when done, right under where it was allocated so it's blindingly obvious it's correct. This possibly fixes a very slow leak of streams in zebra. * irdp_packet.c: (send_packet) don't free the stream here as it's hard to tell if right, plus an error case seemed to returning before free anyway.
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-03-302005-03-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* irdp.h: Add prototype for irdp_sock_init, and fix protos for other irdp_* functions. * irdp_interface.c: (irdp_if_start) If irdp_sock is negative, call irdp_sock_init to create the IRDP socket. (irdp_if_init) Rename to irdp_init(). (get_iflist_ifp) Remove function that is a duplicate of if_lookup_by_index. (*) Make many functions static. And remove superfluous "\n" from several zlog messages. * irdp_main.c: (irdp_init) Remove function that used to call irdp_if_init() and irdp_sock_init(), since we will now create the socket only upon first use. (irdp_sock_init) Do not update global irdp_sock variable, just return the fd and assume that the caller will do so. If setsockopt calls fail, close the socket before returning -1. (*) Make many functions static. * irdp_packet.c: Initialize irdp_sock to -1. (irdp_read_raw) Call standard library function if_lookup_by_index instead of get_iflist_ifp. (irdp_recvmsg) Should be static, not global.
2005-01-292005-01-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* if_ioctl_solaris.c: (interface_list_ioctl) Save errno before calling zserv_privs.change. * ioctl{,_solaris}.c: (if_ioctl,if_ioctl_ipv6) Save errno before calling zserv_privs.change. * ipforward_solaris.c: (solaris_nd) Save errno before calling zserv_privs.change. * irdp_main.c: (irdp_sock_init) Save errno before calling zserv_privs.change. [backport candidate]
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-11-202004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c needs to include "log.h" to pick up the declaration.
2004-10-222004-10-22 Paul Jakma <paul@dishone.st>paul
* ospfd/ospf_packet.c: setsockopt_pktinfo -> setsockopt_ifindex * zebra/irdp_main.c: ditto
2004-09-26Compiler warnings fixes.hasso
2004-09-242004-09-24 Paul Jakma <paul@dishone.st>paul
* irdp_{interface,main}.c: lists typedef removal cleanup. update some list loops to LIST_LOOP. some miscellaneous style and indent fixups. (no_ip_irdp_address_preference_cmd) Fix delete of referenced node in loop. * irdp_packet.c: (irdp_recvmsg) Fix buggy assignment of integer to pointer. * if_ioctl{,_solaris}.c: lists typedef removal cleanup. update some list loops to LIST_LOOP.
2004-08-192004-08-19 Paul Jakma <paul@dishone.st>paul
* irdp_main.c: update to match sockopt renames. * irdp_packet.c: include sockopt.h and update to match sockopt renames.
2004-07-232004-07-23 Paul Jakma <paul@dishone.st>paul
* irdp_main.c: use setsockopt_pktinfo_ipv4 * irdp_packet.c: use SOPT_SIZE_CMSG_PKTINFO_IPV4 and getsockopt_pktinfo_ifindex()
2004-07-13Creating irdp socket requires more privileges.hasso
2004-06-12OK, here it is - irdp support. But don't expect me to fix any bugs in it.hasso