| Age | Commit message (Collapse) | Author |
|---|
|
On Linux, the kernel will only allow for a route to be installed when
its gateway is directly attached according the kernel fib.
There are cases when this restriction by the kernel is too strong, in
those cases, we deploy the RTNH_F_ONLINK netlink flag.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Change the datastructure for recursive routes. This brings the following
benefits:
By using struct nexthop also to store nexthops obtained by recursive
resolution, we can get rid of quite a bit of code duplication in the fib
management. (rt_netlink, rt_socket, ...)
With the new datastructure we can make use of all available paths when
recursive routes are resolved with multipath routes.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Enhance zebra to send routes to the (optional) Forwarding Path Manager
component using the interface defined by fpm/fpm.h.
* configure.ac
- Add --enable-fpm flag.
The FPM-related code in zebra is activated only if the build is
configured with '--enable-fpm'.
- Add HAVE_NETLINK automake conditional.
This allows us to conditionally build netlink-dependent C code.
* zebra/{rib.h,zebra_rib.c}
- Add the 'fpm_q_entries' field to the rib_dest_t structure. This
allows dests to be placed on the fpm queue.
- Define a couple new rib_dest_t flags that hold FPM-related
state.
- Invoke the zfpm_trigger_update() function for a route_node
whenever the information to be sent to the FPM changes.
- rib_can_delete_dest(): Return FALSE if we have to update the FPM
about the given dest. This ensures that the dest is not deleted
even if there are no ribs hanging off of it.
* zebra/zebra_fpm.c
This file holds most of the code for interacting with the FPM.
- If quagga was configured with '--enable-fpm', periodically try
to connect to the FPM.
- When the connection comes up, enqueue all relevent dests to the
FPM queue.
- When the FPM socket is readable, dequeue the next rib_dest_t
from the FPM queue, encode it in to a message and send the
message to the FPM.
- When the connection to the FPM goes down, remove all dests from
the FPM queue, and then start trying to connect to the FPM
again.
- Expose the following new operational commands:
show zebra fpm stats
clear zebra fpm stats
* zebra/zebra_fpm_netlink.c
- zfpm_netlink_encode_route(): Function to encode information
about a rib_dest_t in netlink format.
* zebra/zebra_fpm_private.h
Private header file for the zebra FPM module.
* zebra/zebra_fpm.h
Header file exported by zebra FPM module to the rest of zebra.
* zebra/debug.c
Add the 'debug zebra fpm' command.
* zebra/main.c
Initialize the zebra-FPM code on startup.
* zebra/misc_null.c
Add stub for zfpm_trigger_update().
* zebra/Makefile.am
- Include new file zebra_fpm.c in build.
- Include zebra_fpm_netlink.c in build if HAVE_NETLINK is defined.
* vtysh/Makefile.am
Include zebra_fpm.c in list of files that define cli commands.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* zebra/{rib.h,zebra_rib.c}
Add nexthop_type_to_str(), which returns a human-readable string
corresponding to a nexthop type.
* zebra/rt_netlink.[hc]
- Add new header file that exposes some existing and new
netlink-related functions from rt_netlink.c to the rest of
zebra.
addattr32
addattr_l
rta_addattr_l
nl_msg_type_to_str (new)
nl_rtproto_to_str (new)
- Use nexthop_type_to_str() instead of the static array
'nexthop_types_desc'.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
* lib/zebra.h
Add macro ZEBRA_NUM_OF, which returns the number of elements in a
static array.
* zebra/rib.h
Add the rib_tables_iter_t structure and associated functions,
which allow one to walk all tables in the rib.
* zebra/zebra_rib.c
- Add vrf_id_get_next() to retrieve the first VRF id (if any) that
is greater than a given VRF id.
- Add rib_tables_iter_next().
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Add some code that allows us to determine which VRF and AFI/SAFI a
given RIB table corresponds to.
* zebra/rib.h
Add rib_table_info_t structure, which contains information about
the VRF, AFI and SAFI that a table is for.
* zebra/zebra_rib.c
- Add the vrf_table_create() function, which creates a table and
sets its 'info' pointer to a newly created rib_table_info_t.
The 'info' pointer allows us to go from a route_node or a table
to the associated vrf.
- vrf_alloc(): Use vrf_create_table() to create tables.
* lib/memtypes.c
Add memory type for rib_table_info_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
Add the rib_dest_t structure to hold per-prefix state in the routing
information base. This gives us an appropriate place to maintain the
queueing state of a route_node. Queuing state was previously being
stored on the first rib in the list of ribs hanging off the
route_node.
* zebra/rib.h
- Add new structure rib_dest_t.
- Remove the rn_status field from 'struct rib', it is no longer
required.
- Add macros (RNODE_FOREACH_RIB, RNODE_FOREACH_RIB_SAFE) for
walking all 'struct ribs' corresponding to a route_node. These
hide the fact that there is an intermediate rib_dest_t
structure.
- Add a few utility inlines to go between a rib_dest_t and
associated structures.
* zebra/zebra_rib.c
- rib_link()/rib_unlink()
Tweak for new behavior, where the 'info' pointer of a route_node
points to a rib_dest_t. The list of ribs for a prefix now hangs
off of the dest.
Change the way we ref count route_nodes. We now hold a single
ref count on a route_node if there is a corresponding
rib_dest_t.
- Maintain the queuing state of a route_node on the flags field of
the rib_dest_t.
- Add the rib_gc_dest() function, which deletes a rib_dest_t if it
is no longer required. A rib_dest_t can be deleted iff there are
no struct ribs hanging off of it.
- Call rib_gc_dest() any time we unlink a rib from the
rib_dest_t. Currently we only need to call it once, just before
we return from rib_process().
* zebra/{redistribute,zebra_rib,zebra_snmp,zebra_vty}.c
Use new macros to walk over route_node ribs.
* lib/memtypes.c
Add memory type for rib_dest_t.
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
|
|
The steps were:
$ git checkout google-is-is
$ git merge quagga
$ git checkout google-is-is -- isisd
# Resolve conflicts in the following:
lib/md5.h
zebra/rt_netlink.c
zebra/zebra_rib.c
zebra/zserv.c
Note that the content in the isisd directory is left unchanged in the
merge. As a result, changes made to isisd as part of the following
commits on the quagga mainline are dropped.
# 8ced4e82 is the merge base, e96b3121 is the current quagga master
$ git log --oneline --reverse 8ced4e82..e96b3121 -- isisd
5574999 isisd: fix crash on "no router isis" (BZ#536)
8998075 isisd: raise hello rate for DIS (BZ#539)
306ca83 isisd: include hash.h, not hash.c
b82cdeb delete CVS keywords
2f65867 isisd: indent longopts array
b511468 quagga: option "-z" ("--socket <path>") added
05e54ee build: delete .cvsignore files
b4e45f6 fix zebra protocol after MP-BGP changes
7fd6cd8 isisd: fix circuit state machine
907fd95 isisd: send proper LSP after DIS election
d034aa0 isisd: fix wrong next-hops from SPF
c25eaff isisd: unexpected kernel routing table (BZ#544)
e6b03b7 isisd: implement MD5 circuit authentication
|
|
* zebra/rt_netlink.c:
- Pick up the hardware address of an interface when we receive a
netlink link change message. Extract code for parsing the
link-layer hardware address into a new function so we can reuse
it.
- netlink_routing_table(): Update to handle multipath routes.
- netlink_route_change(): Update to handle multipath routes. Fix
problem where the metric was not being read out.
* zebra/zebra_rib.[ch]: Extern nexthop_ipv4_ifindex_add() -- it is
now called from the netlink code.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
This patch contains the following:
1. Addition of IPv6 SAFI_MULTICAST BGP routes into the RTM's RIB.
2. Deletion of IPv6 SAFI_MULTICAST BGP routes from the RTM's RIB.
|
|
This patch contains the following:
1. Addition of IPv4 SAFI_MULTICAST BGP routes into the RTM's RIB.
2. Deletion of IPv4 SAFI_MULTICAST BGP routes from the RTM's RIB.
|
|
ZEBRA_HELLO message is used by routing daemons to inform zebra
what type of routes daemon will be announcing to zebra. Also
zebra uses route_type_oaths array to track which daemon announces
which protocol. Zebra mops up routes if daemon didn't for some
reason.
|
|
|
|
|
|
|
|
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct rib) Add a route_node rn_status flag field,
this has to be copied every time head RIB of a route_node
changes.
Remove the rib lock field, not needed - see below.
Add a status field for RIB-private flags.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
(general) Fix for bug #268. Problem originally
detailed by Simon Bryden in [quagga-dev 4001].
Essentially, add/delete of a RIB must happen /before/ the
queue. Best-path selection (ie rib_process) and reaping of
freed RIBs can then be done after queueing. Only the route_node
is queued - no important RIB state (i.e. whether a RIB is to be
deleted) is queued.
(struct zebra_queue_node_t) Disappears, no longer need to
track multiple things on the queue, only the route_node.
(rib_{lock,unlock}) removed, RIBs no longer need to be
refcounted, no longer queued.
(rib_queue_qnode_del) Removed, deleted RIBs no longer deleted
via the queue.
(rib_queue_add_qnode) deleted
(rib_queue_add) Only the route_node is queued for best-path
selection, we can check whether it is already queued or
not and avoid queueing same node twice - struct rib * argument
is not needed.
(rib_link/unlink) (un)link RIB from route_node.
(rib_{add,del}node) Front-end to updates of a RIB.
(rib_process) Reap any deleted RIBs via rib_unlink.
Unset the route_node 'QUEUED' flag.
(General) Remove calls to rib_queue_add where add/del node was
called - not needed, update calls where not.
Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
|
|
2006-02-09 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct {rib,nexthop}) Rearrange fields to avoid
needless padding.
(struct rib) Remove the indirect pointer, not used anywhere!
|
|
2005-11-24 Paul Jakma <paul.jakma@sun.com>
* kernel_socket.h: New header for functions exported to sysctl
methods.
* kernel_socket.c: include previous.
Remove static qualifier from couple of functions which are
used by sysctl methods, incorrectly added in previous commit.
Add a workaround for a bogus gcc warning to the RTA_ macros.
* Makefile.am: Add kernel_socket.h to noinst_HEADERS
* if_sysctl.c: include rt.h and kernel_socket.h and remove
redundant prototypes.
* rtread_sysctl.c: ditto.
(route_read) fix mismatch of return values.
* {rt,zserv,rib}.h: Include lib headers depended on.
|
|
add is treated as implicit withdraw.
|
|
rib_add_ipv6() function so that IPv6 routes in RIB can have correct
metric. No IPv6 routing daemon uses distance yet though.
* zserv.c, connected.c, kernel_socket.c, rt_netlink.c,
rtread_proc.c,zserv.c: Pass metric and distance info to the
rib_add_ipv6().
Forwardport from stable branch.
|
|
* (global) Extern and static'ification, with related fixups
of declarations, ensuring files include their own headers, etc.
if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in
list loop
|
|
* rib.h: (struct rib) Add lock field for refcounting.
* zserv.h: (struct zebra_t) Add a ribq workqueue to the zebra
'master' struct.
* zserv.c: (zread_ipv4_add) XMALLOC then memset should be XCALLOC.
* zebra_rib.c: Clean up refcounting of route_node, make struct rib
refcounted and convert rib_process to work-queue. In general,
rib's should be rib_addnode'd and delnode'd to route_nodes, and
these symmetrical functions will manage the locking of referenced
route_node and freeing of struct rib - rather than having users
manage each seperately - with much scope for bugs..
(newrib_free) removed and replaced with rib_lock
(rib_lock) new function, check state of lock and increment.
(rib_unlock) new function, check lock state and decrement. Free
struct rib if refcount hits 0, freeing struct nexthop's, as
newrib_free did.
(rib_addnode) Add RIB to route_node, locking both.
(rib_delnode) Delete RIB from route_node, unlocking each.
(rib_process) Converted to a work-queue work function.
Functional changes are minimal, just arguments, comments and
whitespace.
(rib_queue_add_qnode) Helper function to setup a ribq item.
(rib_queue_add) Helper function, same arguments as old
rib_process, to replace in callers of rib_process.
(rib_queue_qnode_del) ribq deconstructor.
(rib_queue_init) Create the ribq.
(rib_init) call rib_queue_init.
(remainder) Sanitise refcounting of route_node's. Convert to
rib_queue_add, rib_addnode and rib_delnode. Change XMALLOC/memset
to XCALLOC. Remove calls to nexthop_delete and nexthop_free.
|
|
|
|
* lib/version.h: add ZEBRA_URL (unused for now)
* lib/vty.c: CMD_ERR_NOTHING_TODO when reading conf file should not
be fatal. slight reformating.
* ospfd/ospf_zebra.c: ignore reject/blackhole routes if zebra sends
these type of routes. probably should be a new type of route to
allow daemons to more easily choose whether to redistribute them
- rathen than just a flag (eg for reject/blackhole).
reorder the is_prefix_default test for ZEBRA_IPV4_ROUTE_DELETE to
avoid the inverted test - slightly more readable.
* redhat/zebra.spec.in: Add ospfapi port to services file, if
with_ospfapi.
* zebra/rib.h: Change nexthop types to an enum.
* zebra/rt_netlink.c: run it through indent -nut.
Add nexthop_types_desc[] descriptive array for nexthop types.
(netlink_route_multipath) debug statements indicate which branch
they are in and print out nexthop type.
* zebra/zebra_rib.c: slight reformatting.
* zebra/zebra_vty.c: Pass ZEBRA_FLAG_BLACKHOLE flag to
static_add_ipv4() if Null0 route is configured. print out Null0 if
STATIC_IPV4_BLACKHOLE route, and ignore flags (shouldnt be
possible to set flags from vty) for config and show route.
|
|
|
|
|
|
|
