summaryrefslogtreecommitdiff
path: root/zebra/rtadv.c
AgeCommit message (Collapse)Author
2012-01-26zebra: clear host bits of ND RA prefix optionDenis Ovsienko
RFC4861 4.6.2. Prefix Information Prefix An IP address or a prefix of an IP address. The Prefix Length field contains the number of valid leading bits in the prefix. The bits in the prefix after the prefix length are reserved and MUST be initialized to zero by the sender and ignored by the receiver. * rtadv.c * ipv6_nd_prefix(): add missing call to apply_mask_ipv6() * no_ipv6_nd_prefix(): idem
2012-01-26zebra: justify some IPv6 ND RA timers wrt RFCDenis Ovsienko
There was a regression introduced with the previous commit: "ipv6 nd home-agent-lifetime 1800000" appeared by default in every interface section of running-config, although this command is invalid in this context. Troubleshooting and bugfixing of the issue tracked out several bugs in router advertisement procedures, some of which are fixed in this commit. * zebra/interface.c * if_zebra_new_hook(): update to treat -1 as "uninitialized" * nd_dump_vty(): idem * zebra/rtadv.c * rtadv_send_packet(): update processing of "router lifetime" field, "home agent" option and "home agent lifetime" field to conform to RFC6275 better * ipv6_nd_ra_interval_msec(): update MaxRtrAdvInterval range check, make sure it never exceeds (initialized) AdvDefaultLifetime * ipv6_nd_ra_interval(): idem * ipv6_nd_ra_lifetime(): update AdvDefaultLifetime range check, make sure it never falls below MaxRtrAdvInterval * ipv6_nd_homeagent_lifetime(): update HomeAgentLifetime range check * no_ipv6_nd_ra_lifetime(): update to treat -1 as "uninitialized" * no_ipv6_nd_homeagent_lifetime(): idem * rtadv_config_write(): idem
2012-01-26zebra: fix output of IPv6 ND RA optionsDenis Ovsienko
The following options could be configured for an interface, but were never visible in the config text: ipv6 nd adv-interval-option ipv6 nd home-agent-preference ipv6 nd home-agent-lifetime ipv6 nd home-agent-config-flag
2012-01-20zebra: include MTU option in RA on request (BZ#665)Denis Ovsienko
This implements a new "ipv6 nd mtu <1-65535>" interface-level command. * doc/ipv6.texi: add description * zebra/rtadv.c * rtadv_send_packet(): send option type 5, when configured * ipv6_nd_mtu(): new VTY helper * no_ipv6_nd_mtu(): ditto * rtadv_config_write(): add new option * rtadv_init(): list new helpers
2012-01-02zebra: fix IPv6 RA wrt interface removal (BZ#480)Denis Ovsienko
2009-12-08zebra: fix more warnings in rtadvStephen Hemminger
* zebra/rtadv.c * rtadv_free(): remove unused function * rtadv_recv_packet(): break up cast/dereference to avoid compiler type pun warning * rtadv_read(): initialize ifindex, because compiler can't figure out that it is okay
2009-09-01zebra: Fix router advertisements for non-Ethernet link layer addressesDavid Ward
* rtadv.c: round up when calculating the link-layer address option length; add padding to the option if needed to end on an octet boundary
2009-06-23RFC 4191 Default Router Preference support for router advertisementsChris Caputo
Adds "ipv6 nd router-preference (high|medium|low)" and "no ipv6 nd router-preference" interface commands. Files modified: doc/ipv6.texi zebra/interface.c zebra/interface.h zebra/rtadv.c zebra/rtadv.h Signed-off-by: Chris Caputo <ccaputo@alt.net>
2009-06-12[cleanup] functions taking no args should be declared with void argsStephen Hemminger
Use Ansi-C prototypes rather than old K&R method of declaring function without arguments
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2007-05-10[autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma
2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) Extern and static'ification, with related fixups of declarations, ensuring files include their own headers, etc. if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in list loop
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-03-252005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>vincent
* interface.c, interface.h, rtadv.c, rtadv.h: extensions to Neighbor discovery for Mobile IPv6.
2005-01-042005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* configure.ac: Added test for broken CMSG_FIRSTHDR macro (relevant for Solaris 8 and unpatched Solaris 9, don't know whether other platforms are affected). * zebra.h: Define ZCMSG_FIRSTHDR appropriately based on whether config.h indicates HAVE_BROKEN_CMSG_FIRSTHDR (as determined by the configure test program). * sockopt.c: (getsockopt_cmsg_data) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * rtadv.c: (rtadv_recv_packet,rtadv_send_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR. * ripngd.c: (ripng_recv_packet) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-11-202004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c needs to include "log.h" to pick up the declaration.
2004-10-07Fix warnings. Didn't even look at files not compiled in Linux though.hasso
2004-09-26Compiler warnings fixes.hasso
2004-09-23Remove usage of evil list and listnode typedefs.hasso
2004-08-11Include padding in control message length.gdt
Inspired by netbsd:src/usr.sbin/rtadvd/rtadvd.c (from KAME).
2004-08-112004-08-11 Greg Troxel <gdt@fnord.ir.bbn.com>gdt
* rtadv.c (rtadv_send_packet): Allocate space for control messages more carefully; it was wrong on NetBSD/sparc where CMSG alignment is to 8 bytes instead of 4, and overwriting the address. Use the provided macros for determining lengths.
2004-08-11Add extra padding in cmsgdata buffer; there wasn't enough ongdt
NetBSD/sparc, resulting in overwriting the address. Add code to check if overwriting is happening, at least for now. Set msg_flags to MSG_DONTROUTE; they had been stack garbage.
2004-05-18Router advertisement cleanup. Removed compatibility command because it'shasso
very annoying to have both obsolete "prefix-advertisement" and "prefix" in completion. We will break configuration anyway with secondary cleanup, so just remember mention it in release notes.
2004-03-04Many warning fixes from PC Drew ([quagga-dev 940]) and removing using PAGERhasso
from vtysh ([quagga-dev 932]).
2004-01-06change perror to zlog_errgdt
2003-12-03reorder includes to avoid warning.gdt
fixes rest of bug #62
2003-08-272003-08-27 Jay Fenlason <fenlason@redhat.com>paul
* bgpd/bgp_routemap.c: attr->med is type u_in32_t, should be compared with UINT32_MAX * ospfd/ospfd.c: remove redundant assert * zebra/rtadv.c: add missing include for zebra/rib.h
2003-06-152003-06-15 Paul Jakma <paul@dishone.st>paul
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global, pass the thread master in explicitly to vty_init. Sort out some header dependency problems with lib/command.h * zebra/: Move globals to struct zebrad. Update vty_init(). * (.*)/\1_main.c: update call to vty_init().
2003-06-072003-06-07 Paul Jakma <paul@dishone.st>paul
* (zebra/rtadvc.): can not set checksum for ICMPV6, see: From: Jun-ichiro itojun Hagino <itojun@iijlab.net> Subject: [zebra 11052] setsockopt(IPV6_CHECKSUM) does not work for ICMPv6 socket setsockopt(IPV6_CHECKSUM) does not work for ICMPv6 socket. RFC2292 may not be clear enough about it (it talks about raw socket and ICMPv6 socket mixed up), but the next revision (draft-ietf-ipngwg-rfc2292bis-02.txt) is very clear about it. > An attempt to set IPV6_CHECKSUM for an ICMPv6 socket will fail.
2003-06-042003-06-04 Paul Jakma <paul@dishone.st>paul
* Merge of zebra privileges
2002-12-13Initial revisionpaul