summaryrefslogtreecommitdiff
path: root/zebra/zebra_rib.c
AgeCommit message (Collapse)Author
2009-12-03zebra: fix RIB debug message for IPv6David Ward
Apply changes from commit f304cb48f0d7d0ff8f36e7aca8293141a9fa9e60 to rib_queue_add. Also includes spelling fixes.
2009-07-21[zebra] Silence noisy process_subqChris Caputo
zebra_rib.c: process_subq(): #ifdef out debug code.
2009-06-24zebra: Static route does not reach kernel.Joakim Tjernlund
A static route like below: ip route 172.16.1.0/30 192.168.101.162 11 does not move properly to a new interface when the interface used goes down. Zebra reports that it have moved but kernel isn't informed so the route is lost. * zebra_rib.c: (nexthop_active_update) if ifindex has changed, then the route should be considered to have changed. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2009-06-18[cleanup] Use correct buffer size for inet_ntop()Stephen Hemminger
Don't need big buffer 1024 to hold IPV4 (INET_ADDRSTRLEN) or IPv6 (INET6_ADDRSTRLEN) message.
2009-06-18[zebra] remove incorrect debug messageStephen Hemminger
2009-06-18[zebra] Cleanup meta-queue codeStephen Hemminger
Do some cleanup work on recently added meta-queue code: * use table rather than switch * indent with quagga standard indentation * since meta_queue_new is only used at initialization allocation failure should be fatal.
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2008-08-22[zebra] trivia: static qualifiers for metaqStephen Hemminger
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: (process_subq) mark static (rib_meta_queue_add) ditto (meta_queue_new) ditt Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] make some data localStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: static qualifier on local data Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] ignore dead routes in RIB updateStephen Hemminger
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: When doing a RIB update, routes in process of removal should be ignored. This fixes bugs where a route is removed but a recursive route is not changed. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-06-02+ initial edition of meta-queue for RIB updates processing (bug #431)Denis Ovsienko
2008-02-26+ fix bug#326 by rib_lookup_and_pushup()Denis Ovsienko
2008-01-08[link-detect] Static interface routes should behave properly with link-detect.Andrew J. Schorr
2008-01-08 Michael Larson <mike@vyatta.com> * zebra_rib.c: (nexthop_active_check) Replace if_is_up with if_is_operative to solve problems with static interface routes not behaving properly with link-detect.
2007-10-04+ rib_process() speedup for multi-nexthop route nodesDenis Ovsienko
2007-10-03+ Minor bugfix: IPv6 prefixes were logged incorrectly in RIB debugging ↵Denis Ovsienko
calls. Fixed.
2007-08-14Merged own patch for bug #390 (rewrite ↵Denis Ovsienko
zebra/zebra_rib.c:nexthop_active_update())
2007-08-13Merged own patch for the bug #391 (debugging and comments mostly).Denis Ovsienko
2007-08-06[zebra] Add extra debug logging for RIB and RIB queueingPaul Jakma
2007-08-06 Denis Ovsienko * zebra_rib.c: (general) Add extra debug logging for RIB and RIB queue.
2007-06-27[zebra] rib loop check for RIB_ENTRY_REMOVED checks wrong varPaul Jakma
2007-06-25 Denis Ovsienko * zebra_rib.c: (rib_add_ipv4_multipath) Loop through RIB is using 'same' variable, but RIB_ENTRY_REMOVED check is testing the constant 'rib' variable, fix. Impact unknown at this point.
2007-05-02[zebra] Routemap support on received routes, with 'set src' command (linux)Paul Jakma
2007-05-01 David L Stevens <dlstevens@us.ibm.com> * (general) These changes collectively add route-map and prefix-list support to zebra and fix a bug in "show route-map" (with no argument). * doc/main.texi: added route-map, prefix-list, ip protocol and set src documentation * lib/command.h: added PROTOCOL_NODE type * lib/log.c: (proto_name2num) new function, protocol name to number translation. * lib/routemap.c: (vty_show_route_map) fixed "show route-map" without route-map name * lib/routemap.h: added RMAP_ZEBRA type * lib/zebra.h: added proto_name2num() prototype * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and plist * vtysh/Makefile.am: added zebra_routemap.c * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP * zebra/connected.c: (connected_up_ipv4) added src preference argument to rib_add_ipv4() * zebra/kernel_socket.c: (rtm_read) ditto * zebra/main.c: added prefix list initialization * zebra/Makefile.am: added zebra_routemap.c source file * zebra/rib.h: added generic address union "g_addr" and use in existing places that had an explicit union. Added "src" to struct nexthop. Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4. * zebra/rt_netlink.c: (netlink_routing_table) set preferred source on netlink messages. (netlink_route_change) ditto (netlink_route_multipath) ditto. * zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to rib_add_ipv4() call. * zebra/rtread_proc.c: (proc_route_read) ditto * zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument. (nexthop_ipv4_ifindex_add) ditto (rib_add_ipv4) ditto (nexthop_active_check) Add route-map processing. * zebra/zebra_routemap.c: new file for zebra route-map commands. * zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol (vty_show_ip_route_detail) added "src" printing (vty_show_ip_route) ditto (show_ip_protocol_cmd) new command, list routemaps. (config_write_protocol) write out routemap protocl config. (zebra_vty_init) Install the new routemap protocol commands. * zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg (zebra_init) init zebra route-maps. * zebra/zserv.h: add zebra_route_map_init
2006-12-08[zebra] Changes of nexthops of static routes didnt take effectPaul Jakma
2006-12-08 Piotr Chytla <pch@packetconsulting.pl> * zebra_rib.c: (static_install_ipv{4,6}) Case where existing RIB is updated must explicitely rib_addqueue the route_node, to ensure the update actually takes effect.
2006-07-27[zebra] Bug #268, Fix race between add/delete of routes, sanitise rib queueingPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * rib.h: (struct rib) Add a route_node rn_status flag field, this has to be copied every time head RIB of a route_node changes. Remove the rib lock field, not needed - see below. Add a status field for RIB-private flags. * zebra_rib.c: Add a global for the workqueue hold time, useful for testing. (general) Fix for bug #268. Problem originally detailed by Simon Bryden in [quagga-dev 4001]. Essentially, add/delete of a RIB must happen /before/ the queue. Best-path selection (ie rib_process) and reaping of freed RIBs can then be done after queueing. Only the route_node is queued - no important RIB state (i.e. whether a RIB is to be deleted) is queued. (struct zebra_queue_node_t) Disappears, no longer need to track multiple things on the queue, only the route_node. (rib_{lock,unlock}) removed, RIBs no longer need to be refcounted, no longer queued. (rib_queue_qnode_del) Removed, deleted RIBs no longer deleted via the queue. (rib_queue_add_qnode) deleted (rib_queue_add) Only the route_node is queued for best-path selection, we can check whether it is already queued or not and avoid queueing same node twice - struct rib * argument is not needed. (rib_link/unlink) (un)link RIB from route_node. (rib_{add,del}node) Front-end to updates of a RIB. (rib_process) Reap any deleted RIBs via rib_unlink. Unset the route_node 'QUEUED' flag. (General) Remove calls to rib_queue_add where add/del node was called - not needed, update calls where not. Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
2006-07-27[zebra] Add test rig code, for testing the zebra RIBPaul Jakma
2006-07-27 Paul Jakma <paul.jakma@sun.com> * {ioctl,kernel}_null.c: Dummy/Null kernel method implementations, useful for testing zebra code that calls such methods. * {redistribute,misc}_null.c: Dummy/Null methods, as above. But for zclient, and for various misc functions. * test_main.c: Test harness for zebra, currently just to test the RIB. * Makefile.am: Build testzebra using above. * zebra_rib.c: Add a global for the workqueue hold time, useful for testing.
2006-07-27[zebra] Connected routes must always be added to main tablePaul Jakma
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg> * connected.c: (connected_up_ipv4) interface connected routes always go to table main (or otherwise they cannot be used by linux as nexthops) * zserv.c: (zread_ipv4_add) send route to the correct routing table * zebra_rib.c (static_install_ipv4) set routing table
2006-07-02[zebra] Fix CID #104, check addr for null, and #18, check nexthop type argsPaul Jakma
2006-07-02 Paul Jakma <paul.jakma@sun.com> * rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not proceed if addr is NULL. * zebra_rib.c: (static_add_ipv6) Fix CID #18, double check required arguments are supplied for the given nexthop type.
2006-01-30[zebra] Fix pauls zebra_rib/rib_process commit mistakes, again.paul
2006-01-30 Paul Jakma <paul.jakma@sun.com> * zebra_rib.c: (rib_process) Fourth time lucky on this jinxed commit, last commit had a hole that could allow connected route selection to escape beyond the connected route logic. This time I cross-checked with Gunnar first. ;)
2006-01-25[zebra] Fix incorrect changes made in RIB metric selection patchpaul
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no> * zebra_rib.c: (rib_process) Application of Gunnar's earlier metric selection RIB change included incorrect tidy-ups made by commiter. Fix. (NB: any errors here are again due to paul).
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2006-01-182006-01-18 Gunnar Stigen <gunnar.stigen@axxessit.no>paul
* zebra_rib.c: Take interface metric into account.
2005-11-142005-11-14 Paul Jakma <paul.jakma@sun.com>paul
* zebra_rib.c: (rib_process) convert to new workqueue specs and shut up gcc, which complains about cast from void via function parameters, for some dumb reason. Do the cast inside the function instead. (rib_queue_qnode_del) ditto. (rib_queue_init) no need for the casts anymore.
2005-09-21 * zebra_rib.c: Reduce the height of some staircases. Fixhasso
rib_delete_ipv6() to match routes in the RIB by their gateway as well as by destination.
2005-09-212005-09-21 Paul Jakma <paul.jakma@sun.com>paul
* zebra_rib.c: (static_uninstall_ipv{4,6}) Fix regression wrt removal of static routes with multiple-hops introduced with the workqueue conversion. We should free the relevant nexthop and then get rib_process to run, otherwise we just get same static route back again (with no way to unconfigure it, because its already deleted from configuration).
2005-08-27 * zebra_rib.c, rib.h: Add distance and metric arguments to thehasso
rib_add_ipv6() function so that IPv6 routes in RIB can have correct metric. No IPv6 routing daemon uses distance yet though. * zserv.c, connected.c, kernel_socket.c, rt_netlink.c, rtread_proc.c,zserv.c: Pass metric and distance info to the rib_add_ipv6(). Forwardport from stable branch.
2005-06-282005-06-28 Paul Jakma <paul.jakma@sun.com>paul
* (global) Extern and static'ification, with related fixups of declarations, ensuring files include their own headers, etc. if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in list loop
2005-04-282005-04-28 Paul Jakma <paul.jakma@sun.com>paul
* rib.h: (struct rib) Add lock field for refcounting. * zserv.h: (struct zebra_t) Add a ribq workqueue to the zebra 'master' struct. * zserv.c: (zread_ipv4_add) XMALLOC then memset should be XCALLOC. * zebra_rib.c: Clean up refcounting of route_node, make struct rib refcounted and convert rib_process to work-queue. In general, rib's should be rib_addnode'd and delnode'd to route_nodes, and these symmetrical functions will manage the locking of referenced route_node and freeing of struct rib - rather than having users manage each seperately - with much scope for bugs.. (newrib_free) removed and replaced with rib_lock (rib_lock) new function, check state of lock and increment. (rib_unlock) new function, check lock state and decrement. Free struct rib if refcount hits 0, freeing struct nexthop's, as newrib_free did. (rib_addnode) Add RIB to route_node, locking both. (rib_delnode) Delete RIB from route_node, unlocking each. (rib_process) Converted to a work-queue work function. Functional changes are minimal, just arguments, comments and whitespace. (rib_queue_add_qnode) Helper function to setup a ribq item. (rib_queue_add) Helper function, same arguments as old rib_process, to replace in callers of rib_process. (rib_queue_qnode_del) ribq deconstructor. (rib_queue_init) Create the ribq. (rib_init) call rib_queue_init. (remainder) Sanitise refcounting of route_node's. Convert to rib_queue_add, rib_addnode and rib_delnode. Change XMALLOC/memset to XCALLOC. Remove calls to nexthop_delete and nexthop_free.
2005-03-142005-03-14 Paul Jakma <paul.jakma@sun.com>paul
* (global) update all c files to match the lib/vector.h rename of (struct vector).active to max, and vector_max macro to vector_active. * lib/vector.h: Rename to (struct vector).max to slightly less confusing active, for the number of active slots, distinct from allocated or active-and-not-empty. Rename vector_max to vector_active for same reason.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* *.c: Change level of debug messages to LOG_DEBUG.
2004-10-12Some compiler warnings fixes and fix for bugzilla #119.hasso
2004-10-07Fix warnings. Didn't even look at files not compiled in Linux though.hasso
2003-12-23Merge isisd into the Quagga's framework:jardin
- add privs support - use misc quagga's definitions - make it compile"able" - fix segfault cases related to hostname() - add debug isis xxx command This patch has been approved by Paul Jakma.
2003-11-022003-11-02 Krzysztof Oledzki <oleq@ans.pl>paul
* zebra/zebra_rib.c: Revert patch (dating from zebra.org) which caused zebra to read all routes in all tables, rather than just the main table. See [quagga-dev 280].
2003-10-282003-10-27 Gilad Arnold <gilad.arnold@terayon.com>paul
* zebra/zebra_rib.c: (nexthop_active_update) Check for multipath limit when setting changed flag to avoid spurious changes. (static_install_ipv{4,6}) dont uninstall by default, might not be required - avoid spurious uninstalls. (static_uninstall_ipv{4,6}) only uninstall the route if its actually FIB route.
2003-09-292003-09-29 Gilad Arnold <gilad.arnold@terayon.com>paul
* zebra/zebra_rib.c: Fix possible dangling reference to rib route_nodes - unlock it the appropriate number of times. (twice, because of the implicit lock). see [quagga-dev 251].
2003-07-152003-07-15 Paul Jakma <paul@dishone.st>paul
* lib/version.h: add ZEBRA_URL (unused for now) * lib/vty.c: CMD_ERR_NOTHING_TODO when reading conf file should not be fatal. slight reformating. * ospfd/ospf_zebra.c: ignore reject/blackhole routes if zebra sends these type of routes. probably should be a new type of route to allow daemons to more easily choose whether to redistribute them - rathen than just a flag (eg for reject/blackhole). reorder the is_prefix_default test for ZEBRA_IPV4_ROUTE_DELETE to avoid the inverted test - slightly more readable. * redhat/zebra.spec.in: Add ospfapi port to services file, if with_ospfapi. * zebra/rib.h: Change nexthop types to an enum. * zebra/rt_netlink.c: run it through indent -nut. Add nexthop_types_desc[] descriptive array for nexthop types. (netlink_route_multipath) debug statements indicate which branch they are in and print out nexthop type. * zebra/zebra_rib.c: slight reformatting. * zebra/zebra_vty.c: Pass ZEBRA_FLAG_BLACKHOLE flag to static_add_ipv4() if Null0 route is configured. print out Null0 if STATIC_IPV4_BLACKHOLE route, and ignore flags (shouldnt be possible to set flags from vty) for config and show route.
2003-06-192003-06-19 Vladimir Ivaschenko <hazard@francoudi.com>paul
* zebra/rt_netlink.c: Debug statements added to netlink_route_multipath() * zebra/zebra_rib.c: If route has a gateway, delete only existing route with that specified gateway.
2003-06-152003-06-15 Paul Jakma <paul@dishone.st>paul
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global, pass the thread master in explicitly to vty_init. Sort out some header dependency problems with lib/command.h * zebra/: Move globals to struct zebrad. Update vty_init(). * (.*)/\1_main.c: update call to vty_init().
2003-05-25Fix missing else in static_add_ipv4() which was causing case of (!ifname)paul
to always be considered to be a blackhole route. (if gate is passed in, it cant be).
2003-05-25Add back support for null0 interface blackhole routes.paul
2003-05-25Last fixes from 6Wind patch.hasso
2003-05-25Route (reject|blackhole) support from 6Wind patch.hasso