| Age | Commit message (Collapse) | Author |
|---|
|
adding protocols and forgetting to update zebra_rib.c currently causes
a beyond end of array access for the default distance value. fix by
making 150 the default distance for unknown routing protocols.
150 is higher than all other IGPs but lower than iBGP (200)
|
|
* zebra/zebra_rib.c
* rib_queue_add(): indent comments and simplify debug code
* rib_queue_init(): remove unneeded assert() calls and
extra return statements
|
|
* zebra/zebra_rib.c
* nexthop_active_update(): make local int vars unsigned
* nexthop_active_check(): return unsigned for consistency
* rib_dump(): cast time in printf format
* vrf_free(): remove unused function
* vrf_lookup_by_name(): idem
* rib_if_up(): idem
* rib_if_down(): idem
|
|
Apply changes from commit f304cb48f0d7d0ff8f36e7aca8293141a9fa9e60
to rib_queue_add.
Also includes spelling fixes.
|
|
zebra_rib.c: process_subq(): #ifdef out debug code.
|
|
A static route like below: ip route 172.16.1.0/30 192.168.101.162 11
does not move properly to a new interface when the
interface used goes down. Zebra reports that it have
moved but kernel isn't informed so the route is lost.
* zebra_rib.c: (nexthop_active_update) if ifindex has changed, then the
route should be considered to have changed.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
Don't need big buffer 1024 to hold IPV4 (INET_ADDRSTRLEN)
or IPv6 (INET6_ADDRSTRLEN) message.
|
|
|
|
Do some cleanup work on recently added meta-queue code:
* use table rather than switch
* indent with quagga standard indentation
* since meta_queue_new is only used at initialization
allocation failure should be fatal.
|
|
Simple conversion of XMALLOC/memset to XCALLOC
|
|
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: (process_subq) mark static
(rib_meta_queue_add) ditto
(meta_queue_new) ditt
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: static qualifier on local data
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com>
* zebra_rib.c: When doing a RIB update, routes in process of removal
should be ignored. This fixes bugs where a route is removed but a
recursive route is not changed.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
|
|
|
|
2008-01-08 Michael Larson <mike@vyatta.com>
* zebra_rib.c: (nexthop_active_check) Replace if_is_up with
if_is_operative to solve problems with static interface
routes not behaving properly with link-detect.
|
|
|
|
calls. Fixed.
|
|
zebra/zebra_rib.c:nexthop_active_update())
|
|
|
|
2007-08-06 Denis Ovsienko
* zebra_rib.c: (general) Add extra debug logging for RIB and
RIB queue.
|
|
2007-06-25 Denis Ovsienko
* zebra_rib.c: (rib_add_ipv4_multipath) Loop through RIB
is using 'same' variable, but RIB_ENTRY_REMOVED check
is testing the constant 'rib' variable, fix. Impact
unknown at this point.
|
|
2007-05-01 David L Stevens <dlstevens@us.ibm.com>
* (general) These changes collectively add route-map and
prefix-list support to zebra and fix a bug in "show
route-map" (with no argument).
* doc/main.texi: added route-map, prefix-list, ip protocol
and set src documentation
* lib/command.h: added PROTOCOL_NODE type
* lib/log.c: (proto_name2num) new function, protocol name to
number translation.
* lib/routemap.c: (vty_show_route_map) fixed "show route-map"
without route-map name
* lib/routemap.h: added RMAP_ZEBRA type
* lib/zebra.h: added proto_name2num() prototype
* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
plist
* vtysh/Makefile.am: added zebra_routemap.c
* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
* zebra/connected.c: (connected_up_ipv4) added src preference argument
to rib_add_ipv4()
* zebra/kernel_socket.c: (rtm_read) ditto
* zebra/main.c: added prefix list initialization
* zebra/Makefile.am: added zebra_routemap.c source file
* zebra/rib.h: added generic address union "g_addr" and use in
existing places that had an explicit union.
Added "src" to struct nexthop.
Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4.
* zebra/rt_netlink.c: (netlink_routing_table) set preferred source on
netlink messages.
(netlink_route_change) ditto
(netlink_route_multipath) ditto.
* zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to
rib_add_ipv4() call.
* zebra/rtread_proc.c: (proc_route_read) ditto
* zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument.
(nexthop_ipv4_ifindex_add) ditto
(rib_add_ipv4) ditto
(nexthop_active_check) Add route-map processing.
* zebra/zebra_routemap.c: new file for zebra route-map commands.
* zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol
(vty_show_ip_route_detail) added "src" printing
(vty_show_ip_route) ditto
(show_ip_protocol_cmd) new command, list routemaps.
(config_write_protocol) write out routemap protocl config.
(zebra_vty_init) Install the new routemap protocol commands.
* zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg
(zebra_init) init zebra route-maps.
* zebra/zserv.h: add zebra_route_map_init
|
|
2006-12-08 Piotr Chytla <pch@packetconsulting.pl>
* zebra_rib.c: (static_install_ipv{4,6}) Case where existing
RIB is updated must explicitely rib_addqueue the route_node,
to ensure the update actually takes effect.
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* rib.h: (struct rib) Add a route_node rn_status flag field,
this has to be copied every time head RIB of a route_node
changes.
Remove the rib lock field, not needed - see below.
Add a status field for RIB-private flags.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
(general) Fix for bug #268. Problem originally
detailed by Simon Bryden in [quagga-dev 4001].
Essentially, add/delete of a RIB must happen /before/ the
queue. Best-path selection (ie rib_process) and reaping of
freed RIBs can then be done after queueing. Only the route_node
is queued - no important RIB state (i.e. whether a RIB is to be
deleted) is queued.
(struct zebra_queue_node_t) Disappears, no longer need to
track multiple things on the queue, only the route_node.
(rib_{lock,unlock}) removed, RIBs no longer need to be
refcounted, no longer queued.
(rib_queue_qnode_del) Removed, deleted RIBs no longer deleted
via the queue.
(rib_queue_add_qnode) deleted
(rib_queue_add) Only the route_node is queued for best-path
selection, we can check whether it is already queued or
not and avoid queueing same node twice - struct rib * argument
is not needed.
(rib_link/unlink) (un)link RIB from route_node.
(rib_{add,del}node) Front-end to updates of a RIB.
(rib_process) Reap any deleted RIBs via rib_unlink.
Unset the route_node 'QUEUED' flag.
(General) Remove calls to rib_queue_add where add/del node was
called - not needed, update calls where not.
Ignore RIB_ENTRY_REMOVEd ribs in loops through route_nodes
|
|
2006-07-27 Paul Jakma <paul.jakma@sun.com>
* {ioctl,kernel}_null.c: Dummy/Null kernel method implementations,
useful for testing zebra code that calls such methods.
* {redistribute,misc}_null.c: Dummy/Null methods, as above. But
for zclient, and for various misc functions.
* test_main.c: Test harness for zebra, currently just to test the
RIB.
* Makefile.am: Build testzebra using above.
* zebra_rib.c: Add a global for the workqueue hold time, useful
for testing.
|
|
2006-07-27 Rumen Svobodnikov <rumen@telecoms.bg>
* connected.c: (connected_up_ipv4) interface connected routes always
go to table main (or otherwise they cannot be used by linux as
nexthops)
* zserv.c: (zread_ipv4_add) send route to the correct routing table
* zebra_rib.c (static_install_ipv4) set routing table
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not
proceed if addr is NULL.
* zebra_rib.c: (static_add_ipv6) Fix CID #18, double check
required arguments are supplied for the given nexthop type.
|
|
2006-01-30 Paul Jakma <paul.jakma@sun.com>
* zebra_rib.c: (rib_process) Fourth time lucky on this jinxed
commit, last commit had a hole that could allow connected
route selection to escape beyond the connected route logic.
This time I cross-checked with Gunnar first. ;)
|
|
2006-01-25 Gunnar Stigen <gunnar.stigen@axxessit.no>
* zebra_rib.c: (rib_process) Application of Gunnar's earlier
metric selection RIB change included incorrect tidy-ups made
by commiter. Fix. (NB: any errors here are again due to paul).
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* (general) various miscellaneous compiler warning fixes.
Remove redundant break statements from switch clauses
which return.
return from main, not exit, cause it annoys SOS.
Remove stray semi-colons which cause empty-statement
warnings.
* zebra/main.c: (sighup) remove private declaration of external
function.
|
|
* zebra_rib.c: Take interface metric into account.
|
|
* zebra_rib.c: (rib_process) convert to new workqueue specs and
shut up gcc, which complains about cast from void via
function parameters, for some dumb reason. Do the cast
inside the function instead.
(rib_queue_qnode_del) ditto.
(rib_queue_init) no need for the casts anymore.
|
|
rib_delete_ipv6() to match routes in the RIB by their gateway as
well as by destination.
|
|
* zebra_rib.c: (static_uninstall_ipv{4,6}) Fix regression wrt
removal of static routes with multiple-hops introduced with
the workqueue conversion. We should free the relevant
nexthop and then get rib_process to run, otherwise we just
get same static route back again (with no way to unconfigure
it, because its already deleted from configuration).
|
|
rib_add_ipv6() function so that IPv6 routes in RIB can have correct
metric. No IPv6 routing daemon uses distance yet though.
* zserv.c, connected.c, kernel_socket.c, rt_netlink.c,
rtread_proc.c,zserv.c: Pass metric and distance info to the
rib_add_ipv6().
Forwardport from stable branch.
|
|
* (global) Extern and static'ification, with related fixups
of declarations, ensuring files include their own headers, etc.
if_ioctl.c: (interface_info_ioctl) fix obvious arg mis-order in
list loop
|
|
* rib.h: (struct rib) Add lock field for refcounting.
* zserv.h: (struct zebra_t) Add a ribq workqueue to the zebra
'master' struct.
* zserv.c: (zread_ipv4_add) XMALLOC then memset should be XCALLOC.
* zebra_rib.c: Clean up refcounting of route_node, make struct rib
refcounted and convert rib_process to work-queue. In general,
rib's should be rib_addnode'd and delnode'd to route_nodes, and
these symmetrical functions will manage the locking of referenced
route_node and freeing of struct rib - rather than having users
manage each seperately - with much scope for bugs..
(newrib_free) removed and replaced with rib_lock
(rib_lock) new function, check state of lock and increment.
(rib_unlock) new function, check lock state and decrement. Free
struct rib if refcount hits 0, freeing struct nexthop's, as
newrib_free did.
(rib_addnode) Add RIB to route_node, locking both.
(rib_delnode) Delete RIB from route_node, unlocking each.
(rib_process) Converted to a work-queue work function.
Functional changes are minimal, just arguments, comments and
whitespace.
(rib_queue_add_qnode) Helper function to setup a ribq item.
(rib_queue_add) Helper function, same arguments as old
rib_process, to replace in callers of rib_process.
(rib_queue_qnode_del) ribq deconstructor.
(rib_queue_init) Create the ribq.
(rib_init) call rib_queue_init.
(remainder) Sanitise refcounting of route_node's. Convert to
rib_queue_add, rib_addnode and rib_delnode. Change XMALLOC/memset
to XCALLOC. Remove calls to nexthop_delete and nexthop_free.
|
|
* (global) update all c files to match the lib/vector.h rename of
(struct vector).active to max, and vector_max macro to
vector_active.
* lib/vector.h: Rename to (struct vector).max to slightly less
confusing active, for the number of active slots, distinct from
allocated or active-and-not-empty. Rename vector_max to
vector_active for same reason.
|
|
* *.c: Change level of debug messages to LOG_DEBUG.
|
|
|
|
|
|
- add privs support
- use misc quagga's definitions
- make it compile"able"
- fix segfault cases related to hostname()
- add debug isis xxx command
This patch has been approved by Paul Jakma.
|
|
* zebra/zebra_rib.c: Revert patch (dating from zebra.org) which
caused zebra to read all routes in all tables, rather than just
the main table. See [quagga-dev 280].
|
|
* zebra/zebra_rib.c: (nexthop_active_update) Check for multipath
limit when setting changed flag to avoid spurious changes.
(static_install_ipv{4,6}) dont uninstall by default, might not be
required - avoid spurious uninstalls.
(static_uninstall_ipv{4,6}) only uninstall the route if its
actually FIB route.
|
|
* zebra/zebra_rib.c: Fix possible dangling reference to rib
route_nodes - unlock it the appropriate number of times. (twice,
because of the implicit lock). see [quagga-dev 251].
|
|
* lib/version.h: add ZEBRA_URL (unused for now)
* lib/vty.c: CMD_ERR_NOTHING_TODO when reading conf file should not
be fatal. slight reformating.
* ospfd/ospf_zebra.c: ignore reject/blackhole routes if zebra sends
these type of routes. probably should be a new type of route to
allow daemons to more easily choose whether to redistribute them
- rathen than just a flag (eg for reject/blackhole).
reorder the is_prefix_default test for ZEBRA_IPV4_ROUTE_DELETE to
avoid the inverted test - slightly more readable.
* redhat/zebra.spec.in: Add ospfapi port to services file, if
with_ospfapi.
* zebra/rib.h: Change nexthop types to an enum.
* zebra/rt_netlink.c: run it through indent -nut.
Add nexthop_types_desc[] descriptive array for nexthop types.
(netlink_route_multipath) debug statements indicate which branch
they are in and print out nexthop type.
* zebra/zebra_rib.c: slight reformatting.
* zebra/zebra_vty.c: Pass ZEBRA_FLAG_BLACKHOLE flag to
static_add_ipv4() if Null0 route is configured. print out Null0 if
STATIC_IPV4_BLACKHOLE route, and ignore flags (shouldnt be
possible to set flags from vty) for config and show route.
|
|
* zebra/rt_netlink.c: Debug statements added to
netlink_route_multipath()
* zebra/zebra_rib.c: If route has a gateway, delete only existing
route with that specified gateway.
|
|
* lib/vty.{c,h}: Remove vty layer depending on a 'master' global,
pass the thread master in explicitly to vty_init. Sort out some
header dependency problems with lib/command.h
* zebra/: Move globals to struct zebrad. Update vty_init().
* (.*)/\1_main.c: update call to vty_init().
|
|
to always be considered to be a blackhole route. (if gate is passed in, it
cant be).
|
