summaryrefslogtreecommitdiff
path: root/zebra
AgeCommit message (Collapse)Author
2013-10-22zebra: make rib_dump() compatible with IPv6 RIBVincent Bernat
[DL: resolved conflicts in zebra_rib.c] [DL: fix usage with --disable-ipv6] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: apply route-maps for interface routesChristian Franke
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: fix recursive-routes via ifindex routesChristian Franke
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: implement NEXTHOP_FLAG_ONLINKChristian Franke
On Linux, the kernel will only allow for a route to be installed when its gateway is directly attached according the kernel fib. There are cases when this restriction by the kernel is too strong, in those cases, we deploy the RTNH_F_ONLINK netlink flag. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: handle blackholes encountered in recursive resolutionChristian Franke
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: rework recursive route resolutionChristian Franke
Change the datastructure for recursive routes. This brings the following benefits: By using struct nexthop also to store nexthops obtained by recursive resolution, we can get rid of quite a bit of code duplication in the fib management. (rt_netlink, rt_socket, ...) With the new datastructure we can make use of all available paths when recursive routes are resolved with multipath routes. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: improve interface shutdown behaviourChristian Franke
Linux removes IPv6 addresses when the interface is set down. Those addresses need to be readded when the interface is set up again. Also, an interface should not be reactivated from shutdown by configuring an ip address. Finally, remove the three-state logic for the shutdown setting as its sole current use may be mild confusion. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: don't change connected state from zebra/interface.cChristian Franke
Try to avoid changing connected state from zebra/interface.c as this means making assumptions about kernel behaviour which may be or may become wrong. This state should rather be updated by events from the kernel. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: add ZEBRA_IFC_QUEUED to keep track of kernel stateChristian Franke
As there are timeframes when we don't get a notification from the kernel about new addresses. (e.g. while Linux performs IPv6 DAD), we need to have some information whether an address has been sent to the kernel or not. One case where this is relevant would be a user adding an IPv6 address, but deleting it before DAD has been complete. With the next patch which removes some (ill assuming) synchronous parts in address setup, ipv6_address_uninstall would not know whether or not it has to actually delete the prefix from the kernel. Resolving these windows where we lack information is what the flag ZEBRA_IFC_QUEUED is intended for. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: warn if advertising connected with _REAL unsetChristian Franke
The implementation in zebra and the zclient protocol allow to communicate addresses to clients which are not yet in the kernel. This is usually not done and most clients seem to expect an address to be configured in the kernel when they receive it. Therefore, it seems reasonable to issue a warning when advertising an address to the clients that is not yet in the kernel. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: consolidate connected_implicit_withdrawChristian Franke
connected_implicit_withdraw is used at two places and followed by exactly the same code. Move that code into connected_implicit_withdraw and give that function a more descriptive name. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: clear ZEBRA_IFC_CONFIGURED on "no ipv6 addr"Christian Franke
To match the semantics of IPv4, the ZEBRA_IFC_CONFIGURED flag should be cleared when an IPv6 connected is uninstalled via vty. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: make if_subnet_delete a bit more strictChristian Franke
Enhance if_subnet_delete so it will complain about improper use. Also, fix one occurence of improper use where it was called for IPv6 as well. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-09-19zebra: process information about new addresses (BZ#486)Christian Franke
Because of a change of semantics in the Linux kernel, information about changes made by zebra itself was not considered for updates. This change should fix this by accounting for the new semantics. It is based on a patch by lich posted to the bugzilla #486 Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-08-06bgpd, zebra: support NEXTHOP_IPV4_IFINDEX in bgp import checkChristian Franke
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-08-06bgpd, zebra: Support NEXTHOP_IPV4_IFINDEX in nexthop_lookup apiChristian Franke
Since commit ba281d3d040, ospfd uses NEXTHOP_IPV4_IFINDEX routes. The API between zebra and bgpd which is used to query nexthops for recursive routes did not support this nexthop type and therefore, ospf changes (or any other IGP changes which use NEXTHOP_IPV4_IFINDEX) would never trigger any recursive route update. Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-08-06zebra: improve display of NEXTHOP_IPV4_IFINDEX in show ip routeChristian Franke
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-07-31zebra: don't printf to stdout on ZEBRA_IPV6_NEXTHOP_LOOKUPChristian Franke
Signed-off-by: Christian Franke <chris@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-02-23zebra: use SO_RCVBUFFORCE for netlink socketUlrich Weber
so net.core.rmem_max must not be adjusted. Requires linux kernel >= 2.6.14, falls back to SO_RCVBUF on error Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-02-09build: fix "pragma weak" mixupsDavid Lamparter
Not only was there a minor typo in the "pragma weak" preprocessor checks, but also were the tests not behaving as needed - they only indicated support for the /first/ method of implementing weak aliases, which on Linux is __attribute__ and not #pragma. * m4/ax_sys_weak_alias.m4: set defines for _all_ weak alias methods * zebra/kernel_null.c: fix typo Cc: Doug VanLeuven <roamdad@sonic.net> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-16zebra: fix sockaddr_dl length assumptions (BZ#737)David Lamparter
Quagga makes bad assumptions about sockaddr_dl (on NetBSD, but possibly on other systems as well). Particularly, sizeof(struct sockaddr_dl) returns a size that does not include the full sdl_data field, leading to not enough data being copied. This breaks IPv6 RAs in particular, as a broken mac address from sockaddr_dl will be included in the packets. From: Matthias-Christian Ott <ott@mirix.org> Tested-by: Uwe Toenjes <6bone@6bone.informatik.uni-leipzig.de> [further simplified + more comments] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-14zebra: don't overrun afi/safi array boundariesLeonid Rosenboim
zebra was not checking afi/safi values. This was leading to crashes where these values were coming directly from some protocol's on-wire fields. Safeguarding them in zebra is a good start. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-11zebra: fix netlink NL_PKT_BUF_SIZE高鹏
Change default value of variable NL_PKT_BUF_SIZE to 8192UL. Cf. NLMSG_GOODSIZE definition of linux in include/linux/netlink.h for detail. Previously, on platforms with a page size greater than 8192, if you had added too many interfaces, zebra would not have enough buffer space to get the entire interface list. This resulted in an incomplete interface list. From: 高鹏 <gpstrive@gmail.com> [updated to apply after FPM patches] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2013-01-11testzebra: pragma weak: detect systems with weak alias and provide alternativeDoug VanLeuven
LLVM clang does not support #pragma weak (bug 3679) on OS X. There are other systems where the #pragma weak has varying syntax. Added m4 file from the autoconf archives: http://www.gnu.org/software/autoconf-archive/ax_sys_weak_alias.html Fix up zebra/*_null.c files to use #pragma weak alias or stub functions if not available. It's incomplete in that the different format #pragma enable easier fixes on need. Tested on 64bit OS X 10.7, FreeBSD 9.0 amd64 & i386 (32bit) using gcc & clang. Tested on linux 64bit. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-12-13build: fix dist tarballDavid Lamparter
automake file lists haven't quite kept up with recent changes, time to fix them up so the dist tarball actually works... Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: include intf when sending IPv4 nexthop to FPMAvneesh Sachdev
* zebra/zebra_fpm_netlink.c Change the zebra FPM code to include an interface index when encoding a nexthop even if the protocol only provided a gateway address (e.g, NEXTHOP_TYPE_IPV4). Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add module to communicate routes to FPMAvneesh Sachdev
Enhance zebra to send routes to the (optional) Forwarding Path Manager component using the interface defined by fpm/fpm.h. * configure.ac - Add --enable-fpm flag. The FPM-related code in zebra is activated only if the build is configured with '--enable-fpm'. - Add HAVE_NETLINK automake conditional. This allows us to conditionally build netlink-dependent C code. * zebra/{rib.h,zebra_rib.c} - Add the 'fpm_q_entries' field to the rib_dest_t structure. This allows dests to be placed on the fpm queue. - Define a couple new rib_dest_t flags that hold FPM-related state. - Invoke the zfpm_trigger_update() function for a route_node whenever the information to be sent to the FPM changes. - rib_can_delete_dest(): Return FALSE if we have to update the FPM about the given dest. This ensures that the dest is not deleted even if there are no ribs hanging off of it. * zebra/zebra_fpm.c This file holds most of the code for interacting with the FPM. - If quagga was configured with '--enable-fpm', periodically try to connect to the FPM. - When the connection comes up, enqueue all relevent dests to the FPM queue. - When the FPM socket is readable, dequeue the next rib_dest_t from the FPM queue, encode it in to a message and send the message to the FPM. - When the connection to the FPM goes down, remove all dests from the FPM queue, and then start trying to connect to the FPM again. - Expose the following new operational commands: show zebra fpm stats clear zebra fpm stats * zebra/zebra_fpm_netlink.c - zfpm_netlink_encode_route(): Function to encode information about a rib_dest_t in netlink format. * zebra/zebra_fpm_private.h Private header file for the zebra FPM module. * zebra/zebra_fpm.h Header file exported by zebra FPM module to the rest of zebra. * zebra/debug.c Add the 'debug zebra fpm' command. * zebra/main.c Initialize the zebra-FPM code on startup. * zebra/misc_null.c Add stub for zfpm_trigger_update(). * zebra/Makefile.am - Include new file zebra_fpm.c in build. - Include zebra_fpm_netlink.c in build if HAVE_NETLINK is defined. * vtysh/Makefile.am Include zebra_fpm.c in list of files that define cli commands. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: extern/extract some functions from rt_netlink.cAvneesh Sachdev
* zebra/{rib.h,zebra_rib.c} Add nexthop_type_to_str(), which returns a human-readable string corresponding to a nexthop type. * zebra/rt_netlink.[hc] - Add new header file that exposes some existing and new netlink-related functions from rt_netlink.c to the rest of zebra. addattr32 addattr_l rta_addattr_l nl_msg_type_to_str (new) nl_rtproto_to_str (new) - Use nexthop_type_to_str() instead of the static array 'nexthop_types_desc'. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add iterator for walking all tables in RIBAvneesh Sachdev
* lib/zebra.h Add macro ZEBRA_NUM_OF, which returns the number of elements in a static array. * zebra/rib.h Add the rib_tables_iter_t structure and associated functions, which allow one to walk all tables in the rib. * zebra/zebra_rib.c - Add vrf_id_get_next() to retrieve the first VRF id (if any) that is greater than a given VRF id. - Add rib_tables_iter_next(). Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add way to determine VRF/AFI/SAFI of tableAvneesh Sachdev
Add some code that allows us to determine which VRF and AFI/SAFI a given RIB table corresponds to. * zebra/rib.h Add rib_table_info_t structure, which contains information about the VRF, AFI and SAFI that a table is for. * zebra/zebra_rib.c - Add the vrf_table_create() function, which creates a table and sets its 'info' pointer to a newly created rib_table_info_t. The 'info' pointer allows us to go from a route_node or a table to the associated vrf. - vrf_alloc(): Use vrf_create_table() to create tables. * lib/memtypes.c Add memory type for rib_table_info_t. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-30zebra: add structure to hold per-prefix state in RIBAvneesh Sachdev
Add the rib_dest_t structure to hold per-prefix state in the routing information base. This gives us an appropriate place to maintain the queueing state of a route_node. Queuing state was previously being stored on the first rib in the list of ribs hanging off the route_node. * zebra/rib.h - Add new structure rib_dest_t. - Remove the rn_status field from 'struct rib', it is no longer required. - Add macros (RNODE_FOREACH_RIB, RNODE_FOREACH_RIB_SAFE) for walking all 'struct ribs' corresponding to a route_node. These hide the fact that there is an intermediate rib_dest_t structure. - Add a few utility inlines to go between a rib_dest_t and associated structures. * zebra/zebra_rib.c - rib_link()/rib_unlink() Tweak for new behavior, where the 'info' pointer of a route_node points to a rib_dest_t. The list of ribs for a prefix now hangs off of the dest. Change the way we ref count route_nodes. We now hold a single ref count on a route_node if there is a corresponding rib_dest_t. - Maintain the queuing state of a route_node on the flags field of the rib_dest_t. - Add the rib_gc_dest() function, which deletes a rib_dest_t if it is no longer required. A rib_dest_t can be deleted iff there are no struct ribs hanging off of it. - Call rib_gc_dest() any time we unlink a rib from the rib_dest_t. Currently we only need to call it once, just before we return from rib_process(). * zebra/{redistribute,zebra_rib,zebra_snmp,zebra_vty}.c Use new macros to walk over route_node ribs. * lib/memtypes.c Add memory type for rib_dest_t. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-05build: check actually-used BSD link state fieldsDoug VanLeuven
ifi_link_state missing in OS X. There could be other *BSD's that haven't implemented it and possibly affects older implementations. The existing HAVE_BSD_LINK_DETECT configure.ac check is only confirming the link state detection using ifmediareq.ifm_status found in <net/if_media.h>. This is the link state detection used in zebra/ioctl.c. Later, *BSD redefined struct if_data in <net/if.h> and included link state detection. This is the method used in zebra/kernel_socket.c Additional test defined in config.ac to test for member struct if_data.ifi_link_state defined in <net/if.h> separate from test for <net/if_media.h> ifmediareq.ifm_status Fixed #ifdef's in zebra/kernel_socket.c to use the new #define No impact on older function calls in zebra/ioctl.c Tested on 64bit OS X 10.7, FreeBSD 9.0 amd64 & i386 (32bit) using gcc & clang. Tested on linux 64bit. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-05zebra: kernel_socket: fix overflow in RTA_ADDR & RTA_ATTRDoug VanLeuven
In zebra/kernel_socket.c, copying sockaddr from *_msghdr: There are really 2 different lengths that need to be determined. 1) the length required to point to the next sockaddr in the mesg buffer which might include any required padding and 2) the actual length of the sockaddr data that needs to be copied into the destination field. They may or may not be the same value. Sizeof sockaddr_in6 is 28, which to pad for alignment purposes on 32 bit systems with a long of 4 bytes is evenly divided and requires no padding. On 64 bit systems, with a long of 8 it is padded with 4 extra bytes.So the current RTA_* macros are copying 32 bytes into a 28 byte field on 64 bitsystems, where the field overflow did not occur on the 32 bit systems. Since using sa_len required the use of an #ifdef which couldn't be used directly inside a #define, it made sense to move the copy into the function to allow typdef checking throughout and eliminate the hack to suppress compiler warnings. Fixed declaration of cp in ifm_read after compiler noticed type mismatch. Tested on 64bit OS X 10.7, FreeBSD 9.0 amd64 & i386 (32bit) using gcc & clang Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-05zebra: kernel_socket: fix 64bit MacOS X alignmentDoug VanLeuven
In OS X 10.7 zebra crashed on invalid execution address. sockaddr padding in *_msghdr is observed to be 4 bytes in 64bit OS X. The ROUNDUP macro assumed alignment on sizeof(long) which allocates 8 bytes on 64bit systems, 4 bytes on 32bit systems which is true for BSD generally. Test for Apple and use sizeof(int) which allocates 4 bytes on 32 & 64bit systems. Tested on 64bit OS X 10.7, FreeBSD 9.0 amd64 & i386 (32bit) using gcc & clang Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-11-01build: reorder libraries to address linker errorAvneesh Sachdev
The linker on some systems (for example, Ubuntu 12.04 LTS x86_64) appears to be sensitive to the order in which libraries are specified. On these systems, if a library 'A' depends on a library 'B', it has to be specified before 'B' when linking an executable. * zebra/Makefile.am: Make sure LIBCAP comes after libzebra. * tests/Makefile.am: Ensure libm comes after libbgp. Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-10-25*: use array_size() helper macroBalaji.G
Use the array_size() helper macro. Replaces several instances of local macros with the same definition. Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-10-25zebra: make static routes respect table settingNolan Leake
Make static routes respect non-default routing tables. BEFORE PATCH ------------ ! in zebra.conf table 1 ! add static route vtysh> ip route 10.0.0.0/30 eth0 cumulus@net-top0:~$ ip route default via 192.168.0.2 dev eth0 10.0.0.0/30 dev eth0 proto zebra 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15 ! nothing in table 1 cumulus@net-top0:~$ ip route show table 1 AFTER PATCH ----------- ! in zebra.conf table 1 ! add static route vtysh> ip route 10.0.0.0/30 eth0 cumulus@net-top0:~$ ip route default via 192.168.0.2 dev eth0 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15 ! static route in table 1 cumulus@net-top0:~$ ip route show table 1 10.0.0.0/30 dev eth0 proto zebra Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com> Reviewed-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-07-25zebra: Add support for ZEBRA_NEXTHOP_IPV4_IFINDEXJoakim Tjernlund
Actually implement the IPV4_IFINDEX nexthop type that has been drifting around as a definition forever (without any warning about it being a placeholder). Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-07-13zebra: lingering IP address after deletion (BZ#486)David Lamparter
zebra address bookkeeping is a mess. this is just a workaround to have IPv4 address deletion somewhat working on Linux. the if_unset_prefix call is synchronous, when it returns success the address deletion completed successfully. this is either signaled by a netlink ACK or by an OK return value from ioctl(). This version is wrapped by #ifdef HAVE_NETLINK so we don't touch the BSDs for now. * zebra/interface.c: On Linux, update zebra internal state after deleting an address. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-06-25snmp: let handlers accept OID from a lesser prefixVincent Bernat
Most table handlers do not expect to be given an OID whose prefix is outside what they can handle. This is not a problem with the SMUX implementation since it always correct the OID such that the prefix matches. However, this is not the case for the AgentX implementation. A new function, smux_header_table() is used to do this normalization.
2012-06-25build: use net-snmp-config to configure NetSNMPVincent Bernat
The correct method to link to NetSNMP is to use net-snmp-config (which is like pkg-config). Explicit link to libcrypto is also dropped (NetSNMP libs are linked to libcrypto, no need to link Quagga to it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a bug in configure.ac, it was properly populated.
2012-06-25build: only define HAVE_SNMPVincent Bernat
NetSNMP is the only SNMP implementation for Quagga. We don't need two different symbols.
2012-06-25build: allow configure and build in a separate directoryVincent Bernat
Some .h files in lib/ are autogenerated. The search path should include the build directory and the source directory. They usually match but sometimes, they may be different. For example: $ mkdir build $ cd build $ ../configure $ make
2012-05-09zebra: fix up compilation without rtadv/IPv6Joachim Nilsson
let's ground the rtadv.h file if route advertisements are disabled. And fix up the CLI for it, as well as move the "show ip mroute" to its proper place. * zebra/rtadv.h: #ifdef RTADV * zebra/main.c: #ifdef RTADV * zebra/zebra_vty.c: move "show ip mroute" out of #ifdef IPV6 From: Joachim Nilsson <troglobit@gmail.com> [moved #ifdef RTADV to rtadv.h] Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-05-02zebra: feed Connected routes into MRIBG.Balaji
The SAFI_MULTICAST RIB needs to contain Connected routes so that the nexthop lookup does not fail and so that multicast routing daemons do not need to sidestep and look into SAFI_UNICAST to be aware of connected subnets. * zebra/connected.c: add & delete connected in SAFI_MULTICAST Signed-off-by: G.Balaji <balajig81@gmail.com> [merged add/delete patches] Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02zebra: no need to clear memory of the netlink buffersJorge Boncompte [DTI2]
The memory is always written before sending. Clearing it before use slows netlink_route_multipath() down considerably and it's pretty noticeable in a full-internet table scenario loading. * zebra/rt_netlink.c: subtract bulk buffer size from clear Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [reworded commit message] Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02lib, zebra: extend use of sockunion2ip macroJorge Boncompte [DTI2]
* lib/sockunion.c, * zebra/zebra_rib.c: replace ->sin.sin_addr.s_addr with sockunion2ip Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [reworded commit message] Signed-off-by: David Lamparter <equinox@diac24.net>
2012-05-02bgpd, zebra: Fix format for some metric outputsJorge Boncompte [DTI2]
Metrics are unsigned values. * bgpd/bgp_{debug,route,vty}.c, * zebra/zebra_vty.c: replace %d with %u for metrics & distances Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> [reworded commit message] Signed-off-by: David Lamparter <equinox@diac24.net>
2012-04-20Revert "zebra: clean up client routes when client goes away"David Lamparter
This reverts commit af56d404cd56d94ad3b2ec3f159650eb72baef0a, which was accidentally duplicating functionality from commit 2ea1ab1 "zebra: ZEBRA_HELLO and mopping up routes (BZ#448)" Conflicts: zebra/zebra_rib.c Signed-off-by: David Lamparter <equinox@diac24.net>
2012-04-16zebra: use larger buffer (4096) for netlink messagesJR Rivers
Increase the maximum number of nexthops per route by using a larger buffer for netlink messages. * zebra/rt_netlink.c: Use a buffer of 4096 bytes to parse/build netlink messages. Add a hash define for this number (NL_PKT_BUF_SIZE). Most places in the code were previously using a buffer of 1024 bytes.
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-27 07:31:40 +0000