| Age | Commit message (Collapse) | Author |
|---|
|
When the same ip address is used on several interfaces,
and one of them gets deleted (or equivalent: set to down and
then address removed), rib_delete_ipv[46] will also remove
the connected route from other interfaces.
rib_delete_ipv[46] is called twice when an interface is
deleted:
- for the "ifdown" event
- for the address removal
(note: this may be specific to the netlink interface of linux)
The second call does not find the connected route to that same
ifindex anymore, but deletes similar connected routes to any
other ifindex instead.
Reason: the ifindex check is on the same level as the check
for ZEBRA_ROUTE_CONNECT/NEXTHOP_TYPE_IFINDEX. If everything
matches except for the ifindex, the "else" part (intended for
different route types) is executed, thus removing the route
from the wrong interface.
fix: move ifindex check inside the "then" part of the check
for ZEBRA_ROUTE_CONNECT/NEXTHOP_TYPE_IFINDEX. Now connected
routes to other ifindexes will not spill over to the "else"
part for different route types anymore.
|
|
ZEBRA_HELLO message is used by routing daemons to inform zebra
what type of routes daemon will be announcing to zebra. Also
zebra uses route_type_oaths array to track which daemon announces
which protocol. Zebra mops up routes if daemon didn't for some
reason.
|
|
(This patch was modified to leave calls to stream_getl() in place, they
are necessary for the stream's internal pointer to advance to the
correct position. -- Denis)
Signed-off-by: Denis Ovsienko <infrastation@yandex.ru>
Fix gcc warnings about varables that are set but never used.
* bgpd/bgp_attr.c
* cluster_unintern(): ret
* transit_unintern(): ret
* bgp_attr_default_intern(): attre
* bgp_mp_reach_parse(): rd_high, rd_low
* bgpd/bgp_route.c
* bgp_announce_check_rsclient(): bgp
* bgpd/bgp_zebra.c
* zebra_read_ipv4(): ifindex
* zebra_read_ipv6(): ifindex
* bgpd/bgpd.c
* bgp_config_write_peer(): filter
* lib/distribute.c
* distribute_list_all(): dist
* distribute_list(): dist
* distribute_list_prefix_all(): dist
* distribute_list_prefix(): dist
* lib/if_rmap.c
* if_rmap(): if_rmap
* lib/vty.c
* vty_accept(): vty
* lib/zclient.c
* zclient_read(): ret
* zebra/irdp_interface.c
* if_group(): zi
* zebra/rt_netlink.c
* kernel_read(): ret, sock
|
|
this replaces most occurences of routing protocol lists by preprocessor
defines from route_types.h. the latter is autogenerated from
route_types.txt by a perl script (previously awk). adding a routing
protocol now is mostly a matter of changing route_types.txt and log.c.
Conflicts:
lib/route_types.awk
|
|
redistribute is currently limited to "known" protocols. there is no
reason for this limitation, so, remove it.
|
|
adding protocols and forgetting to update zebra_rib.c currently causes
a beyond end of array access for the default distance value. fix by
making 150 the default distance for unknown routing protocols.
150 is higher than all other IGPs but lower than iBGP (200)
|
|
* kernel_socket.c: (ifm_read) The reorganization from commit
6fe70d1b35c189cb1e488b2c26551ba7baac6148 removed setting the
interface link-layer socket address structure on routing socket
platforms. This restores saving the link-layer information because
it might be used elsewhere: rtm_write() when no gateway is given,
if_dump_vty() and rtadv_send_packet().
|
|
|
|
|
|
All daemons modified to support custom path to zserv
socket.
lib: generalize a zclient connection
zclient_socket_connect added. zclient_socket and
zclient_socket_un were hidden under static expression.
"zclient_serv_path_set" modified.
|
|
Check result of fgets(), and don't set variable that is
never used.
|
|
|
|
* rt_netlink.c
* netlink_route_change(): fetch metric information like
netlink_routing_table() does and pass it further
|
|
* zebra_routemap.c: (route_set_src) get rid of the dummy family variable.
|
|
This looks like a bug in original code from misunderstanding
of C rules of evaluation.
|
|
When deleting a VLAN interface after flushing its
addresses, zebra uses 100% CPU time and freezes.
* interface.c: The while loop in line 407 that
should clean up connected routes never hits one
of the 2 lines "last = node;" and thus loops
forever.
Signed-off-by: Roman Hoog Antink <rha@open.ch>
|
|
The router-id table looks like is supposed to be sorted in current
quagga code, but the nodes are not added with the sorting
function.
The sorting function is host byte order dependent.
The values need to converted before comparison.
Fixing this causes Zebra to choose the largest IP address
as router-id, rather than the last address. This probably will
surprise some users. The other option would be to just remove the
comparison function and keep the existing LIFO behavior.
Lastly, simple subtraction works well for comparing.
* zebra/router-id.c
* router_id_add_address(): employ listnode_add_sort()
* router_id_cmp(): employ ntohl(), then compare integers
|
|
* zebra/irdp.h
* irdp_send_thread(): move prototype to common header file
* irdp_advert_off(): idem
* process_solicit(): idem
* irdp_read_raw(): idem
* send_packet(): idem
* zebra/irdp_interface.c
* inet_2a(): move function to where it is used
* in_cksum(): lib/checksum.h already provides prototype
* irdp_send_thread(): prototype moved away
* inet_2a(): idem
* irdp_advert_off(): idem
* b1, b2, b3, b4: get rid of global buffers for inet_2a()
* if_group(): add local buffer for inet_2a()
* if_add_group(): idem
* if_drop_group(): idem
* irdp_config_write(): idem
* Adv_new(): make static
* zebra/irdp_main.c
* irdp_read_raw(): prototype moved away
* send_packet(): idem
* in_cksum(): lib/checksum.h already provides prototype
* inet_2a(): function moved to irdp_interface.c
* zebra/irdp_packet.c
* b1, b2, b3, b4: get rid of global buffers for inet_2a()
* in_cksum(): lib/checksum.h already provides prototype
* process_solicit(): prototype moved away
* irdp_read_raw(): fix uninitialized variable
|
|
* zebra/zebra_rib.c
* rib_queue_add(): indent comments and simplify debug code
* rib_queue_init(): remove unneeded assert() calls and
extra return statements
|
|
* zebra/rtadv.c
* rtadv_free(): remove unused function
* rtadv_recv_packet(): break up cast/dereference to avoid
compiler type pun warning
* rtadv_read(): initialize ifindex, because compiler can't
figure out that it is okay
|
|
|
|
* zebra/zebra_rib.c
* nexthop_active_update(): make local int vars unsigned
* nexthop_active_check(): return unsigned for consistency
* rib_dump(): cast time in printf format
* vrf_free(): remove unused function
* vrf_lookup_by_name(): idem
* rib_if_up(): idem
* rib_if_down(): idem
|
|
* zebra/interface.c
* if_supported_family(): sayonara
|
|
The RTF_CLONING flag has been removed in FreeBSD 8.0 with arp-v2 (see
http://svn.freebsd.org/viewvc/base/stable/8/UPDATING?view=markup),
since it no longer has any meaning. This patch checks if RTF_CLONING
exists before using it.
|
|
|
|
Apply changes from commit f304cb48f0d7d0ff8f36e7aca8293141a9fa9e60
to rib_queue_add.
Also includes spelling fixes.
|
|
* kernel_socket.c: (rtm_flag_dump) Use a const message pointer to be
in sync with commit ce0db9cb11c0bc2e7f89a7d042e50afa495556b4.
|
|
* rtadv.c: round up when calculating the link-layer address option length;
add padding to the option if needed to end on an octet boundary
|
|
* testrib.conf: Example config file for testzebra
|
|
* test_main.c: If required arguments are missing, say that.
|
|
* */*main.c: (main) Current versions of Gcc warn if the return value for
daemon() is not checked. So add a simple test and exit on failure.
|
|
* kernel_null.c: we're pretending to add an address, so
set IFC_REAL. If this isn't done, calling into the 'got address
from kernel' half of zebra will implicitly-withdraw the ifc, which
could cause a crash in test_zebra.c.
|
|
Move zserv socket creation code into zebra_zserv_socket_init() and
call it only after pidfile lock has been acquired exclusively. This
keeps subsequent zebra daemons from deleting the working socket of
an already running process (bug #403).
|
|
zebra_rib.c: process_subq(): #ifdef out debug code.
|
|
A static route like below: ip route 172.16.1.0/30 192.168.101.162 11
does not move properly to a new interface when the
interface used goes down. Zebra reports that it have
moved but kernel isn't informed so the route is lost.
* zebra_rib.c: (nexthop_active_update) if ifindex has changed, then the
route should be considered to have changed.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
Quagga support linux policy routing (ip route ... table $X) with zebra.conf
table $X option. It works fine on ipv4. On ipv6 the parameter is ignored
(table 0 is used).
* zebra/...: Pass appropriate table arg to rib_{add,delete}_ipv6
|
|
Adds "ipv6 nd router-preference (high|medium|low)" and
"no ipv6 nd router-preference" interface commands.
Files modified:
doc/ipv6.texi
zebra/interface.c
zebra/interface.h
zebra/rtadv.c
zebra/rtadv.h
Signed-off-by: Chris Caputo <ccaputo@alt.net>
|
|
autoscan 2.62 complains about bzero(), so a good fix
nowadays is to just replace it.
|
|
* */*main.c: Seems that the actual code was removed previously, but the
argument processing code remained.
|
|
|
|
|
|
|
|
Don't need big buffer 1024 to hold IPV4 (INET_ADDRSTRLEN)
or IPv6 (INET6_ADDRSTRLEN) message.
|
|
Need to check both IFF_UP and IFF_RUNNING if link-detect is enabled,
before announcing routes.
|
|
The MTU data in the netlink message is always unsigned 32 bits.
Don't use integer.
|
|
|
|
Do some cleanup work on recently added meta-queue code:
* use table rather than switch
* indent with quagga standard indentation
* since meta_queue_new is only used at initialization
allocation failure should be fatal.
|
|
Add more prototypes and make some functions static
|
|
|
|
The cmd_nodes used to configure vty, can mostly be static so
(basic data hiding 101).
|
