summaryrefslogtreecommitdiff
path: root/zebra
AgeCommit message (Collapse)Author
2008-08-22[zebra] trivia: static qualifiers for metaqStephen Hemminger
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: (process_subq) mark static (rib_meta_queue_add) ditto (meta_queue_new) ditt Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] make some data localStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: static qualifier on local data Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] ignore dead routes in RIB updateStephen Hemminger
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: When doing a RIB update, routes in process of removal should be ignored. This fixes bugs where a route is removed but a recursive route is not changed. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] netlink: no need to change privs for receiveStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_parse_info) Linux doesn't check privledges on receive, so avoid the overhead of lowering and raising the priviledges on each received message Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] netlink: quiet harmless errorsStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_parse_info) There can be harmless races such as adding an existing route, or deleting an already deleted route. Don't bother logging these unless debugging is turned on. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] netlink buffer size tweaking only needed on receive socketStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_recvbuf) consolidate recvbuf setting (netlink_socket) no need to set receive buffer on netlink sockets generally (kernel_init) set recvbuffer on the listen socket Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] clean up blocking setting of netlink socketsStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra/rt_netlink.c: This change removes the overhead of twiddling the socket twice on every route change. The netlink support has two sockets, one is used for request/response and should always block. The other is used for asynchronous notification and should always be non-blocking. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] Filter out unwanted netlink messages by PIDStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra/rt_netlink.c: Update the netlink socket BPF to cancel out unwanted ACKs on the listen socket by matching on the PID. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[warnings] Fix various SOS warningsPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * */*: Fix various problems flagged by Sun Studio compiler. - '<qualifier> <storage>' obsolescent in declarations - empty statements (';' after ALIAS definitions) - implicit declarations (e.g printstack in lib/log.c) - "\%" in printf string instead of "%%" - loops that return on the first iteration (legitimately, but compiler can't really know), e.g. bgp_routemap.c - internal declarations which mask prototypes.
2008-08-22[lib] mes_lookup string lookup table argument should be marked constStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/log.{c,h}: struct message argument should point to const * */*.c: adjust to suit, Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] mark some rt_netlink functions staticStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra/rt_netlink.c: local functions should be static. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:netlink] Set proto/scope on all route update messagesTimo Teräs
2008-08-13 Timo Teräs <timo.teras@iki.fi> * zebra/rt_netlink.c: (netlink_route{,_multipath) Set protocol and scope appropriately for both NEW and DELROUTE messages, to avoid wiping out non-zebra routes on delete. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma
2008-07-01[zebra] Make BSD link-state deal more gracefully with GIFMEDIA ioctl errorPaul Jakma
2008-07-01 Paul Jakma <paul.jakma@sun.com> * ioctl.c: (if_get_flags) Deal more gracefully with failure of the BSD link-state SIOCGIFMEDIA ioctl, as some interfaces apparently don't implement it (e.g. tun). Also, make BSD link-state checking be conditional on the 'link-detect' interface configuration flag, as it should be. Fixes bug #465.
2008-06-02+ initial edition of meta-queue for RIB updates processing (bug #431)Denis Ovsienko
2008-05-29[daemons] Sanity check port number arguments before usePaul Jakma
2008-05-29 Martin Nagy <mnagy@redhat.com> * */*main.c: Sanity check port numbers before using.
2008-05-29[zebra/linux] Use BPF to filter out responses, to try avoid netlink overrunsPaul Jakma
2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_install_filter) BPF filter to catch and drop responses to zebra's own route messages. (kernel_init) add BPF filter on the netlink socket.
2008-02-26+ fix bug#326 by rib_lookup_and_pushup()Denis Ovsienko
2008-01-11[link-detect] Improve BSD support.Andrew J. Schorr
2008-01-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * lib/zebra.h: Revert previous change, no need to include <net/if_media.h> here. * zebra/ioctl.c: If HAVE_BSD_LINK_DETECT is defined, include <net/if_media.h> (if_get_flags) Remove debug messages about BSD link state. * zebra/kernel_socket.c: (bsd_linkdetect_translate) If link state is unknown, we should set the IFF_RUNNING flag.
2008-01-10[link-detect] Try to get BSD link-detect to work properly.Andrew J. Schorr
2008-01-10 Ingo Flaschberger <if@xip.at> * configure.ac: Define HAVE_BSD_LINK_DETECT if <net/if_media.h> is present. * lib/zebra.h: If HAVE_BSD_LINK_DETECT is defined, include <net/if_media.h>. * zebra/ioctl.c: (if_get_flags) If HAVE_BSD_LINK_DETECT, use the SIOCGIFMEDIA ioctl to ascertain link state. * zebra/kernel_socket.c: (bsd_linkdetect_translate) New function to map the ifm_data.ifi_link_state value into the IFF_RUNNING flag. (ifm_read) Call bsd_linkdetect_translate to fix the IFF_RUNNING flag before calling if_flags_update.
2008-01-08[link-detect] Static interface routes should behave properly with link-detect.Andrew J. Schorr
2008-01-08 Michael Larson <mike@vyatta.com> * zebra_rib.c: (nexthop_active_check) Replace if_is_up with if_is_operative to solve problems with static interface routes not behaving properly with link-detect.
2007-11-12+ fixed bug #418 (changing address on an existing interface doesn't cause ↵Denis Ovsienko
existing static routes to be revalidated)
2007-10-24+ fix the bug reported by Milan Kocian (IPv6 route handling was broken by ↵Denis Ovsienko
the RIB debug changeset). after
2007-10-04+ rib_process() speedup for multi-nexthop route nodesDenis Ovsienko
2007-10-03+ Minor bugfix: IPv6 prefixes were logged incorrectly in RIB debugging ↵Denis Ovsienko
calls. Fixed.
2007-09-14+ sayonara old_pid!Denis Ovsienko
2007-09-14+ fixed bug #402: now the second zebra process doesn't destroy routesDenis Ovsienko
of the first one before dying + we are not going to receive routing messages originated by old_pid, because rib_sweep_route() is called after damon() now. This will allow to drop old_pid completely soon.
2007-09-14Switch from LOOKUP() to lookup() for rtm_type (see bug #401 for details).Denis Ovsienko
2007-09-12* rt_socket.c: (kernel_rtm_ipv4) prefix_buf could be passedDenis Ovsienko
to zlog_err() uninitialized with debug disabled. Fixed.
2007-09-06+ fixed bug #400: adjusted rtread_sysctl.c:route_read()Denis Ovsienko
2007-08-21Looks like bug #320 is finally fixed now.Denis Ovsienko
2007-08-21Fixed ioctl_solaris.c:if_get_mtu() for IPv6'less operationDenis Ovsienko
2007-08-17Fixed bug #394 "RTF_DONE is ignored in rtm_read()"Denis Ovsienko
2007-08-14Merged own patch for bug #390 (rewrite ↵Denis Ovsienko
zebra/zebra_rib.c:nexthop_active_update())
2007-08-13Merged own patch for the bug #391 (debugging and comments mostly).Denis Ovsienko
2007-08-10Use the proper field length for the peer's address (netlink_interface_addr)vize
2007-08-06[zebra] Add extra debug logging for RIB and RIB queueingPaul Jakma
2007-08-06 Denis Ovsienko * zebra_rib.c: (general) Add extra debug logging for RIB and RIB queue.
2007-08-02Add comment questioning part of previous change (Denis?).Greg Troxel
Fix indentation to match accumulated changes.
2007-08-02Bugzilla #384.Greg Troxel
2007-08-02 Denis Ovsienko * rt_socket.c (kernel_rtm_ipv4): Only call rtm_write when changes are intended. Don't set FIB flag on failed additions (such as occur with multiple paths. http://bugzilla.quagga.net/attachment.cgi?id=235&action=view
2007-06-27[zebra] rib loop check for RIB_ENTRY_REMOVED checks wrong varPaul Jakma
2007-06-25 Denis Ovsienko * zebra_rib.c: (rib_add_ipv4_multipath) Loop through RIB is using 'same' variable, but RIB_ENTRY_REMOVED check is testing the constant 'rib' variable, fix. Impact unknown at this point.
2007-05-30[zebra] Trivial patches so we can compile when IPv6 is not enabledAndrew J. Schorr
2007-05-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * zebra_routemap.c: (route_set_src_compile) Use '#ifdef HAVE_IPV6' as needed. * zebra_vty.c: (vty_show_ip_route_detail, vty_show_ip_route) Use '#ifdef HAVE_IPV6' as needed. (show_ip_protocol) Move function definition outside of '#ifdef HAVE_IPV6' section.
2007-05-17[PtP] Fix BSD problems with PtP interfaces: must treat RTA_BRD as peer addressAndrew J. Schorr
2007-05-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * kernel_socket.c: (ifam_read_mesg) Grab RTA_DST and RTA_GATEWAY addresses from the message (if present, which seems unlikely on current BSD platforms), and show them in the debug messages. Also, add ifam_flags to the debug messages. (ifam_read) If the interface is point-to-point, then the RTA_BRD address should be treated as a peer address.
2007-05-10[autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma
2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2007-05-04[zebra] Add zebra_routemap.cPaul Jakma
* zebra_routemap.c should have been in the commit of Steven's routemap patch.
2007-05-02[zebra] Routemap support on received routes, with 'set src' command (linux)Paul Jakma
2007-05-01 David L Stevens <dlstevens@us.ibm.com> * (general) These changes collectively add route-map and prefix-list support to zebra and fix a bug in "show route-map" (with no argument). * doc/main.texi: added route-map, prefix-list, ip protocol and set src documentation * lib/command.h: added PROTOCOL_NODE type * lib/log.c: (proto_name2num) new function, protocol name to number translation. * lib/routemap.c: (vty_show_route_map) fixed "show route-map" without route-map name * lib/routemap.h: added RMAP_ZEBRA type * lib/zebra.h: added proto_name2num() prototype * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and plist * vtysh/Makefile.am: added zebra_routemap.c * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP * zebra/connected.c: (connected_up_ipv4) added src preference argument to rib_add_ipv4() * zebra/kernel_socket.c: (rtm_read) ditto * zebra/main.c: added prefix list initialization * zebra/Makefile.am: added zebra_routemap.c source file * zebra/rib.h: added generic address union "g_addr" and use in existing places that had an explicit union. Added "src" to struct nexthop. Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4. * zebra/rt_netlink.c: (netlink_routing_table) set preferred source on netlink messages. (netlink_route_change) ditto (netlink_route_multipath) ditto. * zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to rib_add_ipv4() call. * zebra/rtread_proc.c: (proc_route_read) ditto * zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument. (nexthop_ipv4_ifindex_add) ditto (rib_add_ipv4) ditto (nexthop_active_check) Add route-map processing. * zebra/zebra_routemap.c: new file for zebra route-map commands. * zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol (vty_show_ip_route_detail) added "src" printing (vty_show_ip_route) ditto (show_ip_protocol_cmd) new command, list routemaps. (config_write_protocol) write out routemap protocl config. (zebra_vty_init) Install the new routemap protocol commands. * zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg (zebra_init) init zebra route-maps. * zebra/zserv.h: add zebra_route_map_init
2007-04-29[zebra/solaris] fix if_get_index passing wrong arg to lifreq_set_namePaul Jakma
2007-04-29 Paul Jakma <paul.jakma@sun.com> * if_ioctl_solaris.c: (if_get_index) Fix bogus argument passed to lifreq_set_name().
2007-04-29[zebra] Fix merge error in previous solaris changesetPaul Jakma
2007-04-29 Paul Jakma <paul.jakma@sun.com> * ioctl{_solaris,}.c: (if_get_mtu) Fix missing ; in last commit.
2007-04-16Only suppress adding a connected route to the kernel if it isDavid Young
already marked "real" (ZEBRA_IFC_REAL), i.e., "in kernel." According to Paul Jakma, this probably fixes Quagga bug #202.
2007-04-10[zebra] MTU change should propogate to zserv client on BSD/SolarisPaul Jakma
2007-04-10 Paul Jakma <paul.jakma@sun.com> * ioctl{_solaris,}.c: (if_get_mtu) Ping clients via zebra_interface_up_update if MTU is changed.