summaryrefslogtreecommitdiff
path: root/zebra
AgeCommit message (Collapse)Author
2009-08-28zebra: Add an example config file for testzebraPaul Jakma
* testrib.conf: Example config file for testzebra
2009-08-28zebra: test_main.c should be a bit more helpful about its usagePaul Jakma
* test_main.c: If required arguments are missing, say that.
2009-08-13all: check return value from daemon() callStephen Hemminger
* */*main.c: (main) Current versions of Gcc warn if the return value for daemon() is not checked. So add a simple test and exit on failure.
2009-07-28[zebra] Fix crash in test_zebraPaul Jakma
* kernel_null.c: we're pretending to add an address, so set IFC_REAL. If this isn't done, calling into the 'got address from kernel' half of zebra will implicitly-withdraw the ifc, which could cause a crash in test_zebra.c.
2009-07-24[zebra] do not touch socket before pidfile lockingDenis Ovsienko
Move zserv socket creation code into zebra_zserv_socket_init() and call it only after pidfile lock has been acquired exclusively. This keeps subsequent zebra daemons from deleting the working socket of an already running process (bug #403).
2009-07-21[zebra] Silence noisy process_subqChris Caputo
zebra_rib.c: process_subq(): #ifdef out debug code.
2009-06-24zebra: Static route does not reach kernel.Joakim Tjernlund
A static route like below: ip route 172.16.1.0/30 192.168.101.162 11 does not move properly to a new interface when the interface used goes down. Zebra reports that it have moved but kernel isn't informed so the route is lost. * zebra_rib.c: (nexthop_active_update) if ifindex has changed, then the route should be considered to have changed. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2009-06-23[zebra] linux policy routing support with ipv6Mathieu Goessens
Quagga support linux policy routing (ip route ... table $X) with zebra.conf table $X option. It works fine on ipv4. On ipv6 the parameter is ignored (table 0 is used). * zebra/...: Pass appropriate table arg to rib_{add,delete}_ipv6
2009-06-23RFC 4191 Default Router Preference support for router advertisementsChris Caputo
Adds "ipv6 nd router-preference (high|medium|low)" and "no ipv6 nd router-preference" interface commands. Files modified: doc/ipv6.texi zebra/interface.c zebra/interface.h zebra/rtadv.c zebra/rtadv.h Signed-off-by: Chris Caputo <ccaputo@alt.net>
2009-06-19[cleanup] convert bzero() deprecated by POSIX to memset()Jeremy Jackson
autoscan 2.62 complains about bzero(), so a good fix nowadays is to just replace it.
2009-06-18[daemons/cleanup] Remove disabled log_mode argument support.Jeremy Jackson
* */*main.c: Seems that the actual code was removed previously, but the argument processing code remained.
2009-06-18[zebra/cleanup] make message table read onlyStephen Hemminger
2009-06-18[zebra] Remove unused structure elementStephen Hemminger
2009-06-18[zebra] Force rib_update when connected route deletedStephen Hemminger
2009-06-18[cleanup] Use correct buffer size for inet_ntop()Stephen Hemminger
Don't need big buffer 1024 to hold IPV4 (INET_ADDRSTRLEN) or IPv6 (INET6_ADDRSTRLEN) message.
2009-06-18[zebra] Only announce connected routes if link is detectedStephen Hemminger
Need to check both IFF_UP and IFF_RUNNING if link-detect is enabled, before announcing routes.
2009-06-18[zebra] MTU is unsignedStephen Hemminger
The MTU data in the netlink message is always unsigned 32 bits. Don't use integer.
2009-06-18[zebra] remove incorrect debug messageStephen Hemminger
2009-06-18[zebra] Cleanup meta-queue codeStephen Hemminger
Do some cleanup work on recently added meta-queue code: * use table rather than switch * indent with quagga standard indentation * since meta_queue_new is only used at initialization allocation failure should be fatal.
2009-06-18[zebra] netlink interface minor cleanupStephen Hemminger
Add more prototypes and make some functions static
2009-06-18[zebra] Fix vyatta bug 2814: Add "show ip route summary" command.Stig Thormodsrud
2009-06-12[cleanup] Make command nodes staticStephen Hemminger
The cmd_nodes used to configure vty, can mostly be static so (basic data hiding 101).
2009-06-12[cleanup] functions taking no args should be declared with void argsStephen Hemminger
Use Ansi-C prototypes rather than old K&R method of declaring function without arguments
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2009-06-02[snmp] Compiler warning fixes for when "--enable-snmp" is configured.Chris Caputo
Compiled on 32-bit and 64-bit linux gcc 4.1.2 platforms. No run-time testing on 32-bit and limited run-time testing on 64-bit.
2008-09-01Merge commit 'remotes/jocke/ospf_neighbour'; commit ↵Paul Jakma
'remotes/jocke/snmp_crosscompile'
2008-08-26testPaul Jakma
2008-08-25Make --enable-snmp cross compile and make libcrypto optional with ↵Joakim Tjernlund
--without-crypto Autoconfig work by me, the rest was done by "Kirill K. Smirnov" <lich@math.spbu.ru>
2008-08-22[administrivia] Update gitignore filesPaul Jakma
- Add more stuff, archive libraries, etc..
2008-08-22[administrivia] Git should ignore backup files and .loT filesPaul Jakma
2008-08-22[trivia] Remove ChangeLog files, as this data is now maintained in SCMPaul Jakma
2008-08-22[zebra] trivial: fix spelling mistakeStephen Hemminger
2008-08-22[zebra] trivia: static qualifiers for metaqStephen Hemminger
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: (process_subq) mark static (rib_meta_queue_add) ditto (meta_queue_new) ditt Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] make some data localStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: static qualifier on local data Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] ignore dead routes in RIB updateStephen Hemminger
2008-08-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra_rib.c: When doing a RIB update, routes in process of removal should be ignored. This fixes bugs where a route is removed but a recursive route is not changed. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] netlink: no need to change privs for receiveStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_parse_info) Linux doesn't check privledges on receive, so avoid the overhead of lowering and raising the priviledges on each received message Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] netlink: quiet harmless errorsStephen Hemminger
2008-06-17 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_parse_info) There can be harmless races such as adding an existing route, or deleting an already deleted route. Don't bother logging these unless debugging is turned on. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] netlink buffer size tweaking only needed on receive socketStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_recvbuf) consolidate recvbuf setting (netlink_socket) no need to set receive buffer on netlink sockets generally (kernel_init) set recvbuffer on the listen socket Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] clean up blocking setting of netlink socketsStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra/rt_netlink.c: This change removes the overhead of twiddling the socket twice on every route change. The netlink support has two sockets, one is used for request/response and should always block. The other is used for asynchronous notification and should always be non-blocking. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:linux] Filter out unwanted netlink messages by PIDStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra/rt_netlink.c: Update the netlink socket BPF to cancel out unwanted ACKs on the listen socket by matching on the PID. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[warnings] Fix various SOS warningsPaul Jakma
2008-08-15 Paul Jakma <paul.jakma@sun.com> * */*: Fix various problems flagged by Sun Studio compiler. - '<qualifier> <storage>' obsolescent in declarations - empty statements (';' after ALIAS definitions) - implicit declarations (e.g printstack in lib/log.c) - "\%" in printf string instead of "%%" - loops that return on the first iteration (legitimately, but compiler can't really know), e.g. bgp_routemap.c - internal declarations which mask prototypes.
2008-08-22[lib] mes_lookup string lookup table argument should be marked constStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/log.{c,h}: struct message argument should point to const * */*.c: adjust to suit, Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra] mark some rt_netlink functions staticStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * zebra/rt_netlink.c: local functions should be static. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[zebra:netlink] Set proto/scope on all route update messagesTimo Teräs
2008-08-13 Timo Teräs <timo.teras@iki.fi> * zebra/rt_netlink.c: (netlink_route{,_multipath) Set protocol and scope appropriately for both NEW and DELROUTE messages, to avoid wiping out non-zebra routes on delete. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma
2008-07-01[zebra] Make BSD link-state deal more gracefully with GIFMEDIA ioctl errorPaul Jakma
2008-07-01 Paul Jakma <paul.jakma@sun.com> * ioctl.c: (if_get_flags) Deal more gracefully with failure of the BSD link-state SIOCGIFMEDIA ioctl, as some interfaces apparently don't implement it (e.g. tun). Also, make BSD link-state checking be conditional on the 'link-detect' interface configuration flag, as it should be. Fixes bug #465.
2008-06-02+ initial edition of meta-queue for RIB updates processing (bug #431)Denis Ovsienko
2008-05-29[daemons] Sanity check port number arguments before usePaul Jakma
2008-05-29 Martin Nagy <mnagy@redhat.com> * */*main.c: Sanity check port numbers before using.
2008-05-29[zebra/linux] Use BPF to filter out responses, to try avoid netlink overrunsPaul Jakma
2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com> * rt_netlink.c: (netlink_install_filter) BPF filter to catch and drop responses to zebra's own route messages. (kernel_init) add BPF filter on the netlink socket.